mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
06d179e31c
- New board support: Apalis eval v1.2 carrier board, Variscite VAR-SOM-MX93, phyBOARD-Segin-i.MX93. - A series from Adam Ford to enable bluetooth, configure multiple queues on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards. - Several changesets from Alexander Stein to add i.MX8DXP support, enable audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for i.MX8MP, and improve MBA8xx board description. - A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices. - A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL support, correcting edma3 power-domains and interrupt numbers, adding I2C, FlexCAN and SMMU devices, etc. - A series from Frieder Schrempf to improve imx8mm-kontron board descriptions, disabling pulls, fixing up RTC device, adding EEPROM, and refactoring OSM-S module, etc. - A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut. - A series from Shengjiu Wang to add PDM micphone and SPDIF sound card support for imx8mm-evk board. - A series of imx8mm-venice boards improvement from Tim Harvey to add TPM device, fix USB OTG VBUS etc. - Other small and random improvements on various boards. -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmXb+44UHHNoYXduZ3Vv QGtlcm5lbC5vcmcACgkQUFdYWoewfM7XrggAlnkIk0aNw4wTD2OLflPHgE0gD3PR D2kn+tXx7iUEIv0JM7x4I4aOUOmZIKKSPn1KdJa1kyUAOxgrQR7bs80jsmmmSi57 GvVsAR7F/a7enOW1rQXqrCmWJgckD1d5Lb+z5b4JnkQsqQSbTwiyHwIzkRvlAGHK zmuN5JSgYt0PKNYd5YylP0uvbnE0aYsDFyRhMxvRYNayb0t1w2gMoGDKc7mHrhXb 84hU9koauUNtzVH2xGH6G2P6PmdOJ6OhQoPIQ+ZCOWvBlAtKzelGGgaySFO3EKAu RkZXqFi1RDofabwZq+aEXFFY7aNEHwkjLdYj0pFiAPRIhJ7cIrRUAGD+tg== =7WYT -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmXhzCUACgkQYKtH/8kJ UieNgBAAmcz37LIo3ZP1W99t4DNw8lc+TtWLW8dIw1Vew5pojRTIh9docQB+o+Ge 7W/GTY1DZ2gO8k3V9WQBsHSk6OTumikBRtuPzQKsrL9SR99MkOzCdPMkuXxfUnD5 WFnzBH/pLr/CmHG+ID8QwWcEDpPwItJWGoK9JtRDeINJEADQuUDAxeW9jeuDihMn g3aC/DvhO02LyoY/3Jn5JgZVPl4ZdJBUR04O7VesEn/ktupVJ3QM0FZUFfm1Cinx 7aivbuf6v4kiQIDmtjR8AmkuJ1vkYCVAMRyNdGnQ04fMn2mXnzH/5cMveH+QSFcl 6/7EU7R2J/nJZAHAuvsEkrz5b1fXsivE+Z9OTGDeqXB1+BuSmDmCUWlkkrRQaTiO ifieyIAtRIeK5py0FNlHNDMA+oQo8oORzOhnP4FhxaSX1G6hpNkYMB1y95TVlcP2 Z0F486eLr+tyPn97eTK57b47/a2YHBywKFktSF75tVv60QM4fZEtOev2PzEvQqIy jLWfp1dMyX8sguNvw2swJ/6rYRVyCGsj6ImvcwR5J7EnhQZKSw4mHFZ0rhaFSioQ mh9RxVoaLY17k1N82nOinkgnv5/jODYLXfo1dl3tAqxjiq6QVosVOQ2rxVLhF9fP yTfoxPl48a9CGISFwtMjvtmg7baCS92unbN0D8Zp7+UZ2IBwmIU= =ZRvF -----END PGP SIGNATURE----- Merge tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree for 6.9: - New board support: Apalis eval v1.2 carrier board, Variscite VAR-SOM-MX93, phyBOARD-Segin-i.MX93. - A series from Adam Ford to enable bluetooth, configure multiple queues on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards. - Several changesets from Alexander Stein to add i.MX8DXP support, enable audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for i.MX8MP, and improve MBA8xx board description. - A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices. - A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL support, correcting edma3 power-domains and interrupt numbers, adding I2C, FlexCAN and SMMU devices, etc. - A series from Frieder Schrempf to improve imx8mm-kontron board descriptions, disabling pulls, fixing up RTC device, adding EEPROM, and refactoring OSM-S module, etc. - A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut. - A series from Shengjiu Wang to add PDM micphone and SPDIF sound card support for imx8mm-evk board. - A series of imx8mm-venice boards improvement from Tim Harvey to add TPM device, fix USB OTG VBUS etc. - Other small and random improvements on various boards. * tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits) arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy arm64: dts: imx8mp-evk: Fix hdmi@3d node arm64: dts: imx93-var-som: Remove phy-supply from eqos arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140 arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node arm64: dts: imx8mm-evk: Add spdif sound card support arm64: dts: mba8xx: Add missing #interrupt-cells arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration arm64: dts: imx8mn: Slow default video_pll clock rate arm64: dts: imx8mp-beacon: Configure multiple queues on eqos arm64: dts: imx8mp-beacon: Enable Bluetooth arm64: dts: freescale: minor whitespace cleanup arm64: dts: lx2160a: Fix DTS for full PL011 UART ... Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
989 lines
26 KiB
Text
989 lines
26 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2013-2014 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&gic>;
|
|
|
|
aliases {
|
|
crypto = &crypto;
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
ethernet2 = &enet2;
|
|
rtc1 = &ftm_alarm0;
|
|
serial0 = &lpuart0;
|
|
serial1 = &lpuart1;
|
|
serial2 = &lpuart2;
|
|
serial3 = &lpuart3;
|
|
serial4 = &lpuart4;
|
|
serial5 = &lpuart5;
|
|
sysclk = &sysclk;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@f00 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0xf00>;
|
|
clocks = <&clockgen 1 0>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
cpu1: cpu@f01 {
|
|
compatible = "arm,cortex-a7";
|
|
device_type = "cpu";
|
|
reg = <0xf01>;
|
|
clocks = <&clockgen 1 0>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x0>;
|
|
};
|
|
|
|
sysclk: sysclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <100000000>;
|
|
clock-output-names = "sysclk";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>;
|
|
};
|
|
|
|
reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&dcfg>;
|
|
offset = <0xb0>;
|
|
mask = <0x02>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
device_type = "soc";
|
|
interrupt-parent = <&gic>;
|
|
ranges;
|
|
|
|
ddr: memory-controller@1080000 {
|
|
compatible = "fsl,qoriq-memory-controller";
|
|
reg = <0x0 0x1080000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
|
|
big-endian;
|
|
};
|
|
|
|
gic: interrupt-controller@1400000 {
|
|
compatible = "arm,gic-400", "arm,cortex-a7-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0x1401000 0x0 0x1000>,
|
|
<0x0 0x1402000 0x0 0x2000>,
|
|
<0x0 0x1404000 0x0 0x2000>,
|
|
<0x0 0x1406000 0x0 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
|
|
};
|
|
|
|
msi1: msi-controller@1570e00 {
|
|
compatible = "fsl,ls1021a-msi";
|
|
reg = <0x0 0x1570e00 0x0 0x8>;
|
|
msi-controller;
|
|
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
msi2: msi-controller@1570e08 {
|
|
compatible = "fsl,ls1021a-msi";
|
|
reg = <0x0 0x1570e08 0x0 0x8>;
|
|
msi-controller;
|
|
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
ifc: memory-controller@1530000 {
|
|
compatible = "fsl,ifc";
|
|
reg = <0x0 0x1530000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sfp: efuse@1e80000 {
|
|
compatible = "fsl,ls1021a-sfp";
|
|
reg = <0x0 0x1e80000 0x0 0x10000>;
|
|
clocks = <&clockgen 4 3>;
|
|
clock-names = "sfp";
|
|
};
|
|
|
|
dcfg: dcfg@1ee0000 {
|
|
compatible = "fsl,ls1021a-dcfg", "syscon";
|
|
reg = <0x0 0x1ee0000 0x0 0x1000>;
|
|
big-endian;
|
|
};
|
|
|
|
qspi: spi@1550000 {
|
|
compatible = "fsl,ls1021a-qspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x1550000 0x0 0x10000>,
|
|
<0x0 0x40000000 0x0 0x20000000>;
|
|
reg-names = "QuadSPI", "QuadSPI-memory";
|
|
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "qspi_en", "qspi";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc: esdhc@1560000 {
|
|
compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
|
|
reg = <0x0 0x1560000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <0>;
|
|
voltage-ranges = <1800 1800 3300 3300>;
|
|
sdhci,auto-cmd12;
|
|
big-endian;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sata: sata@3200000 {
|
|
compatible = "fsl,ls1021a-ahci";
|
|
reg = <0x0 0x3200000 0x0 0x10000>,
|
|
<0x0 0x20220520 0x0 0x4>;
|
|
reg-names = "ahci", "sata-ecc";
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
dma-coherent;
|
|
status = "disabled";
|
|
};
|
|
|
|
scfg: scfg@1570000 {
|
|
compatible = "fsl,ls1021a-scfg", "syscon";
|
|
reg = <0x0 0x1570000 0x0 0x10000>;
|
|
big-endian;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x1570000 0x10000>;
|
|
|
|
extirq: interrupt-controller@1ac {
|
|
compatible = "fsl,ls1021a-extirq";
|
|
#interrupt-cells = <2>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0x1ac 4>;
|
|
interrupt-map =
|
|
<0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
|
|
<1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
|
|
<2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
|
|
<3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
|
|
<4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
|
|
<5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-map-mask = <0x7 0x0>;
|
|
};
|
|
};
|
|
|
|
crypto: crypto@1700000 {
|
|
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
|
|
fsl,sec-era = <7>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x0 0x1700000 0x0 0x100000>;
|
|
ranges = <0x0 0x0 0x1700000 0x100000>;
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
dma-coherent;
|
|
|
|
sec_jr0: jr@10000 {
|
|
compatible = "fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x10000 0x10000>;
|
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr1: jr@20000 {
|
|
compatible = "fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x20000 0x10000>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr2: jr@30000 {
|
|
compatible = "fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr3: jr@40000 {
|
|
compatible = "fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x40000 0x10000>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
};
|
|
|
|
clockgen: clocking@1ee1000 {
|
|
compatible = "fsl,ls1021a-clockgen";
|
|
reg = <0x0 0x1ee1000 0x0 0x1000>;
|
|
#clock-cells = <2>;
|
|
clocks = <&sysclk>;
|
|
};
|
|
|
|
tmu: tmu@1f00000 {
|
|
compatible = "fsl,qoriq-tmu";
|
|
reg = <0x0 0x1f00000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
|
|
fsl,tmu-calibration = <0x00000000 0x00000020>,
|
|
<0x00000001 0x00000024>,
|
|
<0x00000002 0x0000002a>,
|
|
<0x00000003 0x00000032>,
|
|
<0x00000004 0x00000038>,
|
|
<0x00000005 0x0000003e>,
|
|
<0x00000006 0x00000043>,
|
|
<0x00000007 0x0000004a>,
|
|
<0x00000008 0x00000050>,
|
|
<0x00000009 0x00000059>,
|
|
<0x0000000a 0x0000005f>,
|
|
<0x0000000b 0x00000066>,
|
|
|
|
<0x00010000 0x00000023>,
|
|
<0x00010001 0x0000002b>,
|
|
<0x00010002 0x00000033>,
|
|
<0x00010003 0x0000003a>,
|
|
<0x00010004 0x00000042>,
|
|
<0x00010005 0x0000004a>,
|
|
<0x00010006 0x00000054>,
|
|
<0x00010007 0x0000005c>,
|
|
<0x00010008 0x00000065>,
|
|
<0x00010009 0x0000006f>,
|
|
|
|
<0x00020000 0x00000029>,
|
|
<0x00020001 0x00000033>,
|
|
<0x00020002 0x0000003d>,
|
|
<0x00020003 0x00000048>,
|
|
<0x00020004 0x00000054>,
|
|
<0x00020005 0x00000060>,
|
|
<0x00020006 0x0000006c>,
|
|
|
|
<0x00030000 0x00000025>,
|
|
<0x00030001 0x00000033>,
|
|
<0x00030002 0x00000043>,
|
|
<0x00030003 0x00000055>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
dspi0: spi@2100000 {
|
|
compatible = "fsl,ls1021a-v1.0-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen 4 1>;
|
|
spi-num-chipselects = <6>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi1: spi@2110000 {
|
|
compatible = "fsl,ls1021a-v1.0-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2110000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen 4 1>;
|
|
spi-num-chipselects = <6>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@2180000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2180000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
dma-names = "rx", "tx";
|
|
dmas = <&edma0 1 38>, <&edma0 1 39>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@2190000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2190000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
dma-names = "rx", "tx";
|
|
dmas = <&edma0 1 36>, <&edma0 1 37>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@21a0000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x21a0000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
dma-names = "rx", "tx";
|
|
dmas = <&edma0 1 34>, <&edma0 1 35>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@21c0500 {
|
|
compatible = "fsl,16550-FIFO64", "ns16550a";
|
|
reg = <0x0 0x21c0500 0x0 0x100>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <0>;
|
|
fifo-size = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@21c0600 {
|
|
compatible = "fsl,16550-FIFO64", "ns16550a";
|
|
reg = <0x0 0x21c0600 0x0 0x100>;
|
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <0>;
|
|
fifo-size = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@21d0500 {
|
|
compatible = "fsl,16550-FIFO64", "ns16550a";
|
|
reg = <0x0 0x21d0500 0x0 0x100>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <0>;
|
|
fifo-size = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@21d0600 {
|
|
compatible = "fsl,16550-FIFO64", "ns16550a";
|
|
reg = <0x0 0x21d0600 0x0 0x100>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <0>;
|
|
fifo-size = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter0: counter@29d0000 {
|
|
compatible = "fsl,ftm-quaddec";
|
|
reg = <0x0 0x29d0000 0x0 0x10000>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter1: counter@29e0000 {
|
|
compatible = "fsl,ftm-quaddec";
|
|
reg = <0x0 0x29e0000 0x0 0x10000>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter2: counter@29f0000 {
|
|
compatible = "fsl,ftm-quaddec";
|
|
reg = <0x0 0x29f0000 0x0 0x10000>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
counter3: counter@2a00000 {
|
|
compatible = "fsl,ftm-quaddec";
|
|
reg = <0x0 0x2a00000 0x0 0x10000>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@2300000 {
|
|
compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
|
|
reg = <0x0 0x2300000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio1: gpio@2310000 {
|
|
compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
|
|
reg = <0x0 0x2310000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@2320000 {
|
|
compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
|
|
reg = <0x0 0x2320000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@2330000 {
|
|
compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
|
|
reg = <0x0 0x2330000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
lpuart0: serial@2950000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2950000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&sysclk>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart1: serial@2960000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2960000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart2: serial@2970000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2970000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart3: serial@2980000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2980000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart4: serial@2990000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x2990000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart5: serial@29a0000 {
|
|
compatible = "fsl,ls1021a-lpuart";
|
|
reg = <0x0 0x29a0000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm0: pwm@29d0000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x0 0x29d0000 0x0 0x10000>;
|
|
clock-names = "ftm_sys", "ftm_ext",
|
|
"ftm_fix", "ftm_cnt_clk_en";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm1: pwm@29e0000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x0 0x29e0000 0x0 0x10000>;
|
|
clock-names = "ftm_sys", "ftm_ext",
|
|
"ftm_fix", "ftm_cnt_clk_en";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm2: pwm@29f0000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x0 0x29f0000 0x0 0x10000>;
|
|
clock-names = "ftm_sys", "ftm_ext",
|
|
"ftm_fix", "ftm_cnt_clk_en";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm3: pwm@2a00000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x0 0x2a00000 0x0 0x10000>;
|
|
clock-names = "ftm_sys", "ftm_ext",
|
|
"ftm_fix", "ftm_cnt_clk_en";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm4: pwm@2a10000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x0 0x2a10000 0x0 0x10000>;
|
|
clock-names = "ftm_sys", "ftm_ext",
|
|
"ftm_fix", "ftm_cnt_clk_en";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm5: pwm@2a20000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x0 0x2a20000 0x0 0x10000>;
|
|
clock-names = "ftm_sys", "ftm_ext",
|
|
"ftm_fix", "ftm_cnt_clk_en";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm6: pwm@2a30000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x0 0x2a30000 0x0 0x10000>;
|
|
clock-names = "ftm_sys", "ftm_ext",
|
|
"ftm_fix", "ftm_cnt_clk_en";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm7: pwm@2a40000 {
|
|
compatible = "fsl,vf610-ftm-pwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x0 0x2a40000 0x0 0x10000>;
|
|
clock-names = "ftm_sys", "ftm_ext",
|
|
"ftm_fix", "ftm_cnt_clk_en";
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog0: watchdog@2ad0000 {
|
|
compatible = "fsl,imx21-wdt";
|
|
reg = <0x0 0x2ad0000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>;
|
|
clock-names = "wdog-en";
|
|
big-endian;
|
|
};
|
|
|
|
sai1: sai@2b50000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x0 0x2b50000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 47>,
|
|
<&edma0 1 46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai2: sai@2b60000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x0 0x2b60000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>,
|
|
<&clockgen 4 1>, <&clockgen 4 1>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 45>,
|
|
<&edma0 1 44>;
|
|
status = "disabled";
|
|
};
|
|
|
|
edma0: dma-controller@2c00000 {
|
|
#dma-cells = <2>;
|
|
compatible = "fsl,vf610-edma";
|
|
reg = <0x0 0x2c00000 0x0 0x10000>,
|
|
<0x0 0x2c10000 0x0 0x10000>,
|
|
<0x0 0x2c20000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma-tx", "edma-err";
|
|
dma-channels = <32>;
|
|
big-endian;
|
|
clock-names = "dmamux0", "dmamux1";
|
|
clocks = <&clockgen 4 1>,
|
|
<&clockgen 4 1>;
|
|
};
|
|
|
|
dcu: dcu@2ce0000 {
|
|
compatible = "fsl,ls1021a-dcu";
|
|
reg = <0x0 0x2ce0000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 0>,
|
|
<&clockgen 4 0>;
|
|
clock-names = "dcu", "pix";
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio0: mdio@2d24000 {
|
|
compatible = "gianfar";
|
|
device_type = "mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2d24000 0x0 0x4000>,
|
|
<0x0 0x2d10030 0x0 0x4>;
|
|
};
|
|
|
|
mdio1: mdio@2d64000 {
|
|
compatible = "gianfar";
|
|
device_type = "mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2d64000 0x0 0x4000>,
|
|
<0x0 0x2d50030 0x0 0x4>;
|
|
};
|
|
|
|
ptp_clock@2d10e00 {
|
|
compatible = "fsl,etsec-ptp";
|
|
reg = <0x0 0x2d10e00 0x0 0xb0>;
|
|
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,tclk-period = <5>;
|
|
fsl,tmr-prsc = <2>;
|
|
fsl,tmr-add = <0xaaaaaaab>;
|
|
fsl,tmr-fiper1 = <999999995>;
|
|
fsl,tmr-fiper2 = <999999995>;
|
|
fsl,max-adj = <499999999>;
|
|
fsl,extts-fifo;
|
|
};
|
|
|
|
enet0: ethernet@2d10000 {
|
|
compatible = "fsl,etsec2";
|
|
device_type = "network";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&gic>;
|
|
model = "eTSEC";
|
|
fsl,magic-packet;
|
|
ranges;
|
|
dma-coherent;
|
|
|
|
queue-group@2d10000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
reg = <0x0 0x2d10000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
queue-group@2d14000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
reg = <0x0 0x2d14000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
enet1: ethernet@2d50000 {
|
|
compatible = "fsl,etsec2";
|
|
device_type = "network";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&gic>;
|
|
model = "eTSEC";
|
|
ranges;
|
|
dma-coherent;
|
|
|
|
queue-group@2d50000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
reg = <0x0 0x2d50000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
queue-group@2d54000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
reg = <0x0 0x2d54000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
enet2: ethernet@2d90000 {
|
|
compatible = "fsl,etsec2";
|
|
device_type = "network";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&gic>;
|
|
model = "eTSEC";
|
|
ranges;
|
|
dma-coherent;
|
|
|
|
queue-group@2d90000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
reg = <0x0 0x2d90000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
queue-group@2d94000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
reg = <0x0 0x2d94000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
usb2: usb@8600000 {
|
|
compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
|
|
reg = <0x0 0x8600000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
usb3: usb@3100000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x0 0x3100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
snps,quirk-frame-length-adjustment = <0x20>;
|
|
snps,dis_rxdet_inp3_quirk;
|
|
usb3-lpm-capable;
|
|
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
|
|
snps,host-vbus-glitches;
|
|
};
|
|
|
|
pcie@3400000 {
|
|
compatible = "fsl,ls1021a-pcie";
|
|
reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
|
|
<0x40 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
|
|
fsl,pcie-scfg = <&scfg 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
num-viewport = <6>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
|
|
<0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
msi-parent = <&msi1>, <&msi2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0000 0 0 1 &gic GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie@3500000 {
|
|
compatible = "fsl,ls1021a-pcie";
|
|
reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
|
|
<0x48 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
|
fsl,pcie-scfg = <&scfg 1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
num-viewport = <6>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
|
|
<0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
msi-parent = <&msi1>, <&msi2>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0000 0 0 1 &gic GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
can0: can@2a70000 {
|
|
compatible = "fsl,ls1021ar2-flexcan";
|
|
reg = <0x0 0x2a70000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
|
|
clock-names = "ipg", "per";
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
can1: can@2a80000 {
|
|
compatible = "fsl,ls1021ar2-flexcan";
|
|
reg = <0x0 0x2a80000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
|
|
clock-names = "ipg", "per";
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
can2: can@2a90000 {
|
|
compatible = "fsl,ls1021ar2-flexcan";
|
|
reg = <0x0 0x2a90000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
|
|
clock-names = "ipg", "per";
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
can3: can@2aa0000 {
|
|
compatible = "fsl,ls1021ar2-flexcan";
|
|
reg = <0x0 0x2aa0000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen 4 1>, <&clockgen 4 1>;
|
|
clock-names = "ipg", "per";
|
|
big-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
ocram1: sram@10000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x0 0x10000000 0x0 0x10000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x10000000 0x10000>;
|
|
};
|
|
|
|
ocram2: sram@10010000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x0 0x10010000 0x0 0x10000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x10010000 0x10000>;
|
|
};
|
|
|
|
qdma: dma-controller@8390000 {
|
|
compatible = "fsl,ls1021a-qdma";
|
|
reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
|
|
<0x0 0x8389000 0x0 0x1000>, /* Status regs */
|
|
<0x0 0x838a000 0x0 0x2000>; /* Block regs */
|
|
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "qdma-error",
|
|
"qdma-queue0", "qdma-queue1";
|
|
#dma-cells = <2>;
|
|
dma-channels = <8>;
|
|
block-number = <1>;
|
|
block-offset = <0x1000>;
|
|
fsl,dma-queues = <2>;
|
|
status-sizes = <64>;
|
|
queue-sizes = <64 64>;
|
|
big-endian;
|
|
};
|
|
|
|
rcpm: power-controller@1ee2140 {
|
|
compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
|
|
reg = <0x0 0x1ee2140 0x0 0x8>;
|
|
#fsl,rcpm-wakeup-cells = <2>;
|
|
#power-domain-cells = <0>;
|
|
};
|
|
|
|
ftm_alarm0: timer0@29d0000 {
|
|
compatible = "fsl,ls1021a-ftm-alarm";
|
|
reg = <0x0 0x29d0000 0x0 0x10000>;
|
|
reg-names = "ftm";
|
|
fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
big-endian;
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu-thermal {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <5000>;
|
|
|
|
thermal-sensors = <&tmu 0>;
|
|
|
|
trips {
|
|
cpu_alert: cpu-alert {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit: cpu-crit {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&cpu_alert>;
|
|
cooling-device =
|
|
<&cpu0 THERMAL_NO_LIMIT
|
|
THERMAL_NO_LIMIT>,
|
|
<&cpu1 THERMAL_NO_LIMIT
|
|
THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|