Add trivial binding for HTU31 Temperature and Humidity sensor.
Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250217051110.46827-3-andrey.lalaev@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add TI INA233 Current and Power Monitor bindings.
Signed-off-by: Leo Yang <leo.yang.sy0@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250116085939.1235598-2-leo.yang.sy0@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the Congatec Board Controller. This controller exposes
temperature, voltage, current and fan sensors.
The available sensors list cannot be predicted. Some sensors can be
present or not, depending the system.
The driver has an internal list of all possible sensors, for all Congatec
boards. The Board Controller gives to the driver its sensors list, and
their status (active or not).
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20250203-congatec-board-controller-hwmon-v4-1-ff6c76a4662c@bootlin.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for LT7170 and LT7171. The LT7170 and LT7171 are 20 A, 16 V,
Single- or Dual-Phase, Silent Switcher Step-Down Regulators with Digital
Power System Management.
The relevant registers in the LT7170 and LT7171 are similar to those in
the LTC3887, but with fewer channels. This adds the chip ID and
identification of ASCII to differentiate between the LT7170 and LT7171.
These devices support polling for status updates and clearing peak
values. The data format for voltage, current, and temperature is set to
IEEE754 for precision and compatibility.
Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-3-da0218c38197@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add LTC7170 and LT7171 to supported devices of LTC2978. It has similar
set of registers to LTC3887, differing only in number of channels and
some PMBUS status and functionalities.
Co-developed-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Cherrence Sarip <cherrence.sarip@analog.com>
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250317-hwmon-next-v1-2-da0218c38197@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some Alienware laptops that support the SMM interface, may have up to 4
fans.
Tested on an Alienware x15 r1.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250304055249.51940-2-kuurtb@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When the ntc is reading Out Of Bounds instead of clipping to the nearest
limit (min/max) return -ENODATA. This prevents malfunctioning sensors
from sending a device into a shutdown loop due to a critical trip.
This implementation will only work for ntc type thermistors if a ptc
type is to be implemented the min/max ohm calculation must be adjusted
to take that into account.
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Link: https://lore.kernel.org/r/20250307-ntc_oob-v2-1-bba2d32b1a8e@gocontroll.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The string "power%d_interval_max" and "power%d_interval_min" in the
hwmon_power_attr_templates[] are corresponding to the sysfs interface name
of hwmon_power_average_interval_max and hwmon_power_average_interval_min.
But the 'average' word is missing in two strings. Fortunately, there is
no driver to use it yet.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250304074640.2770353-1-lihuisong@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We encountered a problem that a fake power alarm is reported to
user on the platform unsupported notifications at the second step
below:
1> Query 'power1_alarm' attribute when the power capping occurs.
2> Query 'power1_alarm' attribute when the power capping is over
and the current average power is less then power cap value.
The root cause is that the resource->power_alarm is set to true
at the first step. And power meter use this old value to show
the power alarm state instead of the current the comparison value.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://lore.kernel.org/r/20250220030832.2976-1-lihuisong@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This adds an optional regulator support (e.g. switchable supply) to the
GPIO fan binding.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250210145934.761280-2-alexander.stein@ew.tq-group.com
[groeck: Changed power supply description as suggested by Krzysztof]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Report the value of the CAPABILITY register in debugfs if supported.
Only check if the register is supported if PMBUS_NO_CAPABILITY
is not set.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Define debugfs attributes used to access status registers in a data
structure and loop through it instead of creating debugfs files
one by one. This reduces code size and simplifies adding additional
attributes if needed.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Define debugfs attributes which need block data access in a data
structure and loop through it instead of creating debugfs files
one by one. This reduces code size and simplifies adding additional
attributes if needed.
While this is currently only used for manufacturer specific attributes,
the access code is generic and also works for other block attributes,
so rename operation functions from _mfg to _block.
While at it, rename the "revison" file to "pmbus_revision" to make its
meaning more obvious and to create a clear distinction against the
"mfg_revision" file.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The regulator notification function never returns an error.
Declare it as void.
While at it, fix its indentation.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Drop contitionals around debugfs code to compile it unconditionally.
In practice it will be optimized away by the compiler if CONFIG_DEBUG_FS
is not enabled, so the code size is not affected by this change.
Also silently ignore errors if debugfs initialization fails.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The I2C core now manages a debugfs directory per I2C client. PMBus has
its own debugfs hierarchy. Link the two, so a user will be pointed to
the I2C domain from the PMBus domain.
Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
In preparation for the next patch in the series, use a local debugfs
variable during debugfs initialization.
No functional change intended.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Checkpatch reports bad multi-line comments, bad multi-line alignments,
missing blank lines after variable declarations, unnecessary empty lines,
unnecessary spaces, and unnecessary braces. Fix most of the reported
problems except for some multi-line alignment problems.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add optional gpio device tree bindings to the UCD90320.
The binding's description is already mentioning the number of GPIOs but
without actual gpio controller description.
Signed-off-by: Jonathan Stroud <jonathan.stroud@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/662a050f3f8160fe7c80d4f19e45eb4fac0f2f0a.1740384385.git.michal.simek@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix the comment stating that the "ntp," compatible strings are deprecated
which should be "ntc,"
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250227-ntc_thermistor_fixes-v1-2-70fa73200b52@gocontroll.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for Cyan Skillfish (AMD Family 17h Model 47h),
which appear to be Zen 2 based APU.
The patch was tested with an AMD BC-250 board.
Signed-off-by: Mikhail Paulyshka <me@mixaill.net>
Link: https://lore.kernel.org/r/20250302155009.49951-1-me@mixaill.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The expression PCC_NUM_RETRIES * pcc_chan->latency is currently being
evaluated using 32-bit arithmetic.
Since a value of type 'u64' is used to store the eventual result,
and this result is later sent to the function usecs_to_jiffies with
input parameter unsigned int, the current data type is too wide to
store the value of ctx->usecs_lat.
Change the data type of "usecs_lat" to a more suitable (narrower) type.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://lore.kernel.org/r/20250204095400.95013-1-a.vatoropin@crpt.ru
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The I2C core now offers a debugfs-directory per client. Use it and
remove the custom handling.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250123160347.44635-1-wsa+renesas@sang-engineering.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
NCT7716 is similar to NCT7717 but has one more address support,
both of them only have a 8 bit resolution local thermal sensor.
NCT7718 has 11 bit resoulution remote thermal sensor.
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250117100744.1571385-2-a0282524688@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the Nuvoton NCT7716/7717/7718 thermal sensors.
NCT7716 and NCT7717 do not support to add temperature offset.
The maximum offset supported by NCT7718 is 127875 millicelsius
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250117100744.1571385-3-a0282524688@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for LTM4673. The LTM4673 is a quad output, dual 12A and dual
5A, switching mode DC/DC step-down μModule regulator integrated with
4-channel power system manager.
This adds only the chip id, the checks for the manufacturer special id,
and the relevant attributes for the device's pmbus_driver_info.
The device does not support clear peaks.
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Link: https://lore.kernel.org/r/20250124-ltm4673-v1-2-a2c6aa37c903@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add LTM4673 to supported devices of LTC2978. Unlike other LTM46xx
devices, LTM4673 is a μModule regulator that outputs four channels.
Signed-off-by: Cedric Encarnacion <cedricjustine.encarnacion@analog.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250124-ltm4673-v1-1-a2c6aa37c903@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
REGCACHE_NONE is the default type of the cache when not provided.
Drop unneeded explicit assignment to it.
Note, it's defined to 0, and if ever be redefined, it will break
literally a lot of the drivers, so it very unlikely to happen.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250129152036.1797725-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
-----BEGIN PGP SIGNATURE-----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=mWV6
-----END PGP SIGNATURE-----
Merge tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
- sh: boards: Use imply to enable hardware with complex dependencies
- sh: Migrate to the generic rule for built-in DTB
- sh: irq: Use seq_put_decimal_ull_width() for decimal values
-----BEGIN PGP SIGNATURE-----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=G6GL
-----END PGP SIGNATURE-----
Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
Summary of Changes since 2024.11.30:
Fix regression in 2023.11.07 that affinitized forked child
in one-shot mode.
Harden one-shot mode against hotplug online/offline
Enable RAPL SysWatt column by default.
Add initial PTL, CWF platform support.
Harden initial PMT code in response to early use.
Enable first built-in PMT counter: CWF c1e residency
Refuse to run on unsupported platforms without --force,
to encourage updating to a version that supports the system,
and to avoid no-so-useful measurement results.
Signed-off-by: Len Brown <len.brown@intel.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ5yJdgAKCRBZ7Krx/gZQ
69W4AQDwgxceiQ6icx3rFhCWQigne4jdMO84kd8tNaa+xHGe1AD/WnkeChc5DqjQ
wZWZxAAzml9SS01IcSiHWaF5fgrjlA0=
=rXOq
-----END PGP SIGNATURE-----
Merge tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
-----BEGIN PGP SIGNATURE-----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=/P+2
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- various updates for special file handling: symlink handling,
support for creating sockets, cleanups, new mount options (e.g. to
allow disabling using reparse points for them, and to allow
overriding the way symlinks are saved), and fixes to error paths
- fix for kerberos mounts (allow IAKerb)
- SMB1 fix for stat and for setting SACL (auditing)
- fix an incorrect error code mapping
- cleanups"
* tag 'v6.14-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
cifs: Fix parsing native symlinks directory/file type
cifs: update internal version number
cifs: Add support for creating WSL-style symlinks
smb3: add support for IAKerb
cifs: Fix struct FILE_ALL_INFO
cifs: Add support for creating NFS-style symlinks
cifs: Add support for creating native Windows sockets
cifs: Add mount option -o reparse=none
cifs: Add mount option -o symlink= for choosing symlink create type
cifs: Fix creating and resolving absolute NT-style symlinks
cifs: Simplify reparse point check in cifs_query_path_info() function
cifs: Remove symlink member from cifs_open_info_data union
cifs: Update description about ACL permissions
cifs: Rename struct reparse_posix_data to reparse_nfs_data_buffer and move to common/smb2pdu.h
cifs: Remove struct reparse_posix_data from struct cifs_open_info_data
cifs: Remove unicode parameter from parse_reparse_point() function
cifs: Fix getting and setting SACLs over SMB1
cifs: Remove intermediate object of failed create SFU call
cifs: Validate EAs for WSL reparse points
cifs: Change translation of STATUS_PRIVILEGE_NOT_HELD to -EPERM
...
