Prepare for switching VDSO to generic C implementation in following
patch. Here, we:
- Prepare the helpers to call the C VDSO functions
- Prepare the required callbacks for the C VDSO functions
- Prepare the clocksource.h files to define VDSO_ARCH_CLOCKMODES
- Add the C trampolines to the generic C VDSO functions
powerpc is a bit special for VDSO as well as system calls in the
way that it requires setting CR SO bit which cannot be done in C.
Therefore, entry/exit needs to be performed in ASM.
Implementing __arch_get_vdso_data() would clobber the link register,
requiring the caller to save it. As the ASM calling function already
has to set a stack frame and saves the link register before calling
the C vdso function, retriving the vdso data pointer there is lighter.
Implement __arch_vdso_capable() and always return true.
Provide vdso_shift_ns(), as the generic x >> s gives the following
bad result:
18: 35 25 ff e0 addic. r9,r5,-32
1c: 41 80 00 10 blt 2c <shift+0x14>
20: 7c 64 4c 30 srw r4,r3,r9
24: 38 60 00 00 li r3,0
...
2c: 54 69 08 3c rlwinm r9,r3,1,0,30
30: 21 45 00 1f subfic r10,r5,31
34: 7c 84 2c 30 srw r4,r4,r5
38: 7d 29 50 30 slw r9,r9,r10
3c: 7c 63 2c 30 srw r3,r3,r5
40: 7d 24 23 78 or r4,r9,r4
In our case the shift is always <= 32. In addition, the upper 32 bits
of the result are likely nul. Lets GCC know it, it also optimises the
following calculations.
With the patch, we get:
0: 21 25 00 20 subfic r9,r5,32
4: 7c 69 48 30 slw r9,r3,r9
8: 7c 84 2c 30 srw r4,r4,r5
c: 7d 24 23 78 or r4,r9,r4
10: 7c 63 2c 30 srw r3,r3,r5
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-6-mpe@ellerman.id.au
Currently we use ifdef __powerpc64__ in barrier.h to decide if we
should use lwsync or eieio for SMPWMB which is then used by
__smp_wmb().
That means when we are building the compat VDSO we will use eieio,
because it's 32-bit code, even though we're building a 64-bit kernel
for a 64-bit CPU.
Although eieio should work, it would be cleaner if we always used the
same barrier, even for the 32-bit VDSO.
So change the ifdef to CONFIG_PPC64, so that the selection is made
based on the bitness of the kernel we're building for, not the current
compilation unit.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-5-mpe@ellerman.id.au
When we're building the compat VDSO we are building 32-bit code but in
the context of a 64-bit kernel configuration.
To make this work we need to be careful in some places when using
ifdefs to differentiate between CONFIG_PPC64 and __powerpc64__.
CONFIG_PPC64 indicates the kernel we're building is 64-bit, but it
doesn't tell us that we're currently building 64-bit code - we could
be building 32-bit code for the compat VDSO.
On the other hand __powerpc64__ tells us that we are currently
building 64-bit code (and therefore we must also be building a 64-bit
kernel).
In the case of get_tb() we want to use the 32-bit code sequence
regardless of whether the kernel we're building for is 64-bit or
32-bit, what matters is the word size of the current object. So we
need to check __powerpc64__ to decide if we use mftb() or the
mftbu()/mftb() sequence.
For mftb() the logic for CPU_FTR_CELL_TB_BUG only makes sense if we're
building 64-bit code, so guard that with a __powerpc64__ check.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-4-mpe@ellerman.id.au
In order to easily use get_tb() from C VDSO, move timebase
functions into a new header named asm/vdso/timebase.h
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-3-mpe@ellerman.id.au
cpu_relax() need to be in asm/vdso/processor.h to be used by
the C VDSO generic library.
Move it there.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-2-mpe@ellerman.id.au
In order to build VDSO32 for PPC64, we need to have CPU_FTRS_POSSIBLE
and CPU_FTRS_ALWAYS independant of whether we are building the
32 bits VDSO or the 64 bits VDSO.
Use #ifdef CONFIG_PPC64 instead of #ifdef __powerpc64__
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126131006.2431205-1-mpe@ellerman.id.au
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=xgYa
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures"
* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
A regression fix for a boot failure on some 32-bit machines.
A fix for host crashes in the KVM system reset handling.
A fix for a possible oops in the KVM XIVE interrupt handling on Power9.
A fix for host crashes triggerable via the KVM emulated MMIO handling when
running HPT guests.
A couple of small build fixes.
Thanks to:
Andreas Schwab, Cédric Le Goater, Christophe Leroy, Erhard Furtner, Greg Kurz,
Greg Kurz, Németh Márton, Nicholas Piggin, Nick Desaulniers, Serge Belyshev,
Stephen Rothwell.
-----BEGIN PGP SIGNATURE-----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=j0M7
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.10:
- regression fix for a boot failure on some 32-bit machines.
- fix for host crashes in the KVM system reset handling.
- fix for a possible oops in the KVM XIVE interrupt handling on
Power9.
- fix for host crashes triggerable via the KVM emulated MMIO handling
when running HPT guests.
- a couple of small build fixes.
Thanks to Andreas Schwab, Cédric Le Goater, Christophe Leroy, Erhard
Furtner, Greg Kurz, Greg Kurz, Németh Márton, Nicholas Piggin, Nick
Desaulniers, Serge Belyshev, and Stephen Rothwell"
* tag 'powerpc-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix allnoconfig build since uaccess flush
powerpc/64s/exception: KVM Fix for host DSI being taken in HPT guest MMU context
powerpc: Drop -me200 addition to build flags
KVM: PPC: Book3S HV: XIVE: Fix possible oops when accessing ESB page
powerpc/64s: Fix KVM system reset handling when CONFIG_PPC_PSERIES=y
powerpc/32s: Use relocation offset when setting early hash table
When offlining a CPU, powerpc/64s does not flush TLBs, rather it just
leaves the CPU set in mm_cpumasks, so it continues to receive TLBIEs
to manage its TLBs.
However the exit_flush_lazy_tlbs() function expects that after
returning, all CPUs (except self) have flushed TLBs for that mm, in
which case TLBIEL can be used for this flush. This breaks for offline
CPUs because they don't get the IPI to flush their TLB. This can lead
to stale translations.
Fix this by clearing the CPU from mm_cpumasks, then flushing all TLBs
before going offline.
These offlined CPU bits stuck in the cpumask also prevents the cpumask
from being trimmed back to local mode, which means continual broadcast
IPIs or TLBIEs are needed for TLB flushing. This patch prevents that
situation too.
A cast of many were involved in working this out, but in particular
Milton, Aneesh, Paul made key discoveries.
Fixes: 0cef77c779 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Milton Miller <miltonm@us.ibm.com>
Debugged-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Debugged-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201126102530.691335-5-npiggin@gmail.com
The clang toolchain treats inline assembly a bit differently than
straight assembly code. In particular, inline assembly doesn't have
the complete context available to resolve expressions. This is
intentional to avoid divergence in the resulting assembly code.
We can work around this issue by borrowing a workaround done for ARM,
i.e. not directly testing the labels themselves, but by moving the
current output pointer by a value that should always be zero. If this
value is not null, then we will trigger a backward move, which is
explicitly forbidden.
Signed-off-by: Bill Wendling <morbo@google.com>
[mpe: Put it in a macro and only do the workaround for clang]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201120224034.191382-4-morbo@google.com
Most architectures with the exception of alpha, mips, parisc and
sparc use the same values for these flags. Move their definitions into
asm-generic/signal-defs.h and allow the architectures with non-standard
values to override them. Also, document the non-standard flag values
in order to make it easier to add new generic flags in the future.
A consequence of this change is that on powerpc and x86, the constants'
values aside from SA_RESETHAND change signedness from unsigned
to signed. This is not expected to impact realistic use of these
constants. In particular the typical use of the constants where they
are or'ed together and assigned to sa_flags (or another int variable)
would not be affected.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://linux-review.googlesource.com/id/Ia3849f18b8009bf41faca374e701cdca36974528
Link: https://lkml.kernel.org/r/b6d0d1ec34f9ee93e1105f14f288fba5f89d1f24.1605235762.git.pcc@google.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Using DECLARE_STATIC_KEY_FALSE needs linux/jump_table.h.
Otherwise the build fails with eg:
arch/powerpc/include/asm/book3s/64/kup-radix.h:66:1: warning: data definition has no type or storage class
66 | DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
Fixes: 9a32a7e78b ("powerpc/64s: flush L1D after user accesses")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
[mpe: Massage change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201123184016.693fe464@canb.auug.org.au
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and after the
kernel performs any user accesses (patch 3). It also adds a self-test and
performs some related cleanups.
-----BEGIN PGP SIGNATURE-----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=Yibq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-cve-2020-4788' into fixes
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and after the
kernel performs any user accesses (patch 3). It also adds a self-test and
performs some related cleanups.
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid(). That
symbol is exported for modules. However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=y
...and:
CONFIG_NUMA_KEEP_MEMINFO=n
CONFIG_MEMORY_HOTPLUG=y
...it failed to export the symbol in the case of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=n
Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.
Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols. Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.
The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h. In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h. An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.
The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.
[dan.j.williams@intel.com: v4]
Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com
[dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning]
Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: a035b6bf86 ("mm/memory_hotplug: introduce default phys_to_target_node() implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To enable seccomp constant action bitmaps, we need to have a static
mapping to the audit architecture and system call table size. Add these
for powerpc.
__LITTLE_ENDIAN__ is used here instead of CONFIG_CPU_LITTLE_ENDIAN
to keep it consistent with asm/syscall.h.
Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/0b64925362671cdaa26d01bfe50b3ba5e164adfd.1605101222.git.yifeifz2@illinois.edu
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and after the
kernel performs any user accesses (patch 3). It also adds a self-test and
performs some related cleanups.
-----BEGIN PGP SIGNATURE-----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=Yibq
-----END PGP SIGNATURE-----
Merge tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes for CVE-2020-4788.
From Daniel's cover letter:
IBM Power9 processors can speculatively operate on data in the L1
cache before it has been completely validated, via a way-prediction
mechanism. It is not possible for an attacker to determine the
contents of impermissible memory using this method, since these
systems implement a combination of hardware and software security
measures to prevent scenarios where protected data could be leaked.
However these measures don't address the scenario where an attacker
induces the operating system to speculatively execute instructions
using data that the attacker controls. This can be used for example to
speculatively bypass "kernel user access prevention" techniques, as
discovered by Anthony Steinhauser of Google's Safeside Project. This
is not an attack by itself, but there is a possibility it could be
used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern.
This patch series flushes the L1 cache on kernel entry (patch 2) and
after the kernel performs any user accesses (patch 3). It also adds a
self-test and performs some related cleanups"
* tag 'powerpc-cve-2020-4788' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: rename pnv|pseries_setup_rfi_flush to _setup_security_mitigations
selftests/powerpc: refactor entry and rfi_flush tests
selftests/powerpc: entry flush test
powerpc: Only include kup-radix.h for 64-bit Book3S
powerpc/64s: flush L1D after user accesses
powerpc/64s: flush L1D on kernel entry
selftests/powerpc: rfi_flush: disable entry flush if present
In kup.h we currently include kup-radix.h for all 64-bit builds, which
includes Book3S and Book3E. The latter doesn't make sense, Book3E
never uses the Radix MMU.
This has worked up until now, but almost by accident, and the recent
uaccess flush changes introduced a build breakage on Book3E because of
the bad structure of the code.
So disentangle things so that we only use kup-radix.h for Book3S. This
requires some more stubs in kup.h and fixing an include in
syscall_64.c.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache after user accesses.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
IBM Power9 processors can speculatively operate on data in the L1 cache
before it has been completely validated, via a way-prediction mechanism. It
is not possible for an attacker to determine the contents of impermissible
memory using this method, since these systems implement a combination of
hardware and software security measures to prevent scenarios where
protected data could be leaked.
However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that
the attacker controls. This can be used for example to speculatively bypass
"kernel user access prevention" techniques, as discovered by Anthony
Steinhauser of Google's Safeside Project. This is not an attack by itself,
but there is a possibility it could be used in conjunction with
side-channels or other weaknesses in the privileged code to construct an
attack.
This issue can be mitigated by flushing the L1 cache between privilege
boundaries of concern. This patch flushes the L1 cache on kernel entry.
This is part of the fix for CVE-2020-4788.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a new power PMU flag "PPMU_P10_DD1" which can be used to
conditionally add any code path for power10 DD1 processor version.
Also modify power10 PMU driver code to set this flag only for DD1,
based on the Processor Version Register (PVR) value.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201021085329.384535-1-maddy@linux.ibm.com
RFI macro is just there to add an infinite loop past
rfi in order to avoid prefetch on 40x in half a dozen
of places in entry_32 and head_32.
Those places are already full of #ifdefs, so just add a
few more to explicitely show those loops and remove RFI.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f7e9cb9e9240feec63cb330abf40b67d1aad852f.1604854583.git.christophe.leroy@csgroup.eu
In head_64.S, we have two places using RFI to return to
kernel. Use RFI_TO_KERNEL instead.
They are the two only places using RFI on book3s/64, so
the RFI macro can go away.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7719261b0a0d2787772339484c33eb809723bca7.1604854583.git.christophe.leroy@csgroup.eu
On 8xx, we get the following features:
[ 0.000000] cpu_features = 0x0000000000000100
[ 0.000000] possible = 0x0000000000000120
[ 0.000000] always = 0x0000000000000000
This is not correct. As CONFIG_PPC_8xx is mutually exclusive with all
other configurations, the three lines should be equal.
The problem is due to CPU_FTRS_GENERIC_32 which is taken when
CONFIG_BOOK3S_32 is NOT selected. This CPU_FTRS_GENERIC_32 is
pointless because there is no generic configuration supporting
all 32 bits but book3s/32.
Remove this pointless generic features definition to unbreak the
calculation of 'possible' features and 'always' features.
Fixes: 76bc080ef5 ("[POWERPC] Make default cputable entries reflect selected CPU family")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/76a85f30bf981d1aeaae00df99321235494da254.1604426550.git.christophe.leroy@csgroup.eu
powerpc used to set the PTE specific flags in set_pte_at(). That is
different from other architectures. To be consistent with other
architectures powerpc updated pfn_pte() to set _PAGE_PTE in commit
379c926d63 ("powerpc/mm: move setting pte specific flags to
pfn_pte")
That commit didn't do the same for pfn_pmd() because we expect
pmd_mkhuge() to do that. But as per Linus that is a bad rule:
The rule that you must use "pmd_mkhuge()" seems _completely_ wrong.
The only valid use to ever make a pmd out of a pfn is to make a
huge-page.
Hence update pfn_pmd() to set _PAGE_PTE.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201022091115.39568-1-aneesh.kumar@linux.ibm.com
fls() and fls64() are using __builtin_ctz() and _builtin_ctzll().
On powerpc, those builtins trivially use ctlzw and ctlzd power
instructions.
Allthough those instructions provide the expected result with
input argument 0, __builtin_ctz() and __builtin_ctzll() are
documented as undefined for value 0.
The easiest fix would be to use fls() and fls64() functions
defined in include/asm-generic/bitops/builtin-fls.h and
include/asm-generic/bitops/fls64.h, but GCC output is not optimal:
00000388 <testfls>:
388: 2c 03 00 00 cmpwi r3,0
38c: 41 82 00 10 beq 39c <testfls+0x14>
390: 7c 63 00 34 cntlzw r3,r3
394: 20 63 00 20 subfic r3,r3,32
398: 4e 80 00 20 blr
39c: 38 60 00 00 li r3,0
3a0: 4e 80 00 20 blr
000003b0 <testfls64>:
3b0: 2c 03 00 00 cmpwi r3,0
3b4: 40 82 00 1c bne 3d0 <testfls64+0x20>
3b8: 2f 84 00 00 cmpwi cr7,r4,0
3bc: 38 60 00 00 li r3,0
3c0: 4d 9e 00 20 beqlr cr7
3c4: 7c 83 00 34 cntlzw r3,r4
3c8: 20 63 00 20 subfic r3,r3,32
3cc: 4e 80 00 20 blr
3d0: 7c 63 00 34 cntlzw r3,r3
3d4: 20 63 00 40 subfic r3,r3,64
3d8: 4e 80 00 20 blr
When the input of fls(x) is a constant, just check x for nullity and
return either 0 or __builtin_clz(x). Otherwise, use cntlzw instruction
directly.
For fls64() on PPC64, do the same but with __builtin_clzll() and
cntlzd instruction. On PPC32, lets take the generic fls64() which
will use our fls(). The result is as expected:
00000388 <testfls>:
388: 7c 63 00 34 cntlzw r3,r3
38c: 20 63 00 20 subfic r3,r3,32
390: 4e 80 00 20 blr
000003a0 <testfls64>:
3a0: 2c 03 00 00 cmpwi r3,0
3a4: 40 82 00 10 bne 3b4 <testfls64+0x14>
3a8: 7c 83 00 34 cntlzw r3,r4
3ac: 20 63 00 20 subfic r3,r3,32
3b0: 4e 80 00 20 blr
3b4: 7c 63 00 34 cntlzw r3,r3
3b8: 20 63 00 40 subfic r3,r3,64
3bc: 4e 80 00 20 blr
Fixes: 2fcff790dc ("powerpc: Use builtin functions for fls()/__fls()/fls64()")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/348c2d3f19ffcff8abe50d52513f989c4581d000.1603375524.git.christophe.leroy@csgroup.eu
The only thing keeping the cpu_setup() and cpu_restore() functions
used in the cputable entries for Power7, Power8, Power9 and Power10 in
assembly was cpu_restore() being called before there was a stack in
generic_secondary_smp_init(). Commit ("powerpc/64: Set up a kernel
stack for secondaries before cpu_restore()") means that it is now
possible to use C.
Rewrite the functions in C so they are a little bit easier to read.
This is not changing their functionality.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Tweak copyright and authorship notes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201014072837.24539-2-jniethe5@gmail.com
Stefan Agner reported a bug when using zsram on 32-bit Arm machines
with RAM above the 4GB address boundary:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = a27bd01c
[00000000] *pgd=236a0003, *pmd=1ffa64003
Internal error: Oops: 207 [#1] SMP ARM
Modules linked in: mdio_bcm_unimac(+) brcmfmac cfg80211 brcmutil raspberrypi_hwmon hci_uart crc32_arm_ce bcm2711_thermal phy_generic genet
CPU: 0 PID: 123 Comm: mkfs.ext4 Not tainted 5.9.6 #1
Hardware name: BCM2711
PC is at zs_map_object+0x94/0x338
LR is at zram_bvec_rw.constprop.0+0x330/0xa64
pc : [<c0602b38>] lr : [<c0bda6a0>] psr: 60000013
sp : e376bbe0 ip : 00000000 fp : c1e2921c
r10: 00000002 r9 : c1dda730 r8 : 00000000
r7 : e8ff7a00 r6 : 00000000 r5 : 02f9ffa0 r4 : e3710000
r3 : 000fdffe r2 : c1e0ce80 r1 : ebf979a0 r0 : 00000000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
Control: 30c5383d Table: 235c2a80 DAC: fffffffd
Process mkfs.ext4 (pid: 123, stack limit = 0x495a22e6)
Stack: (0xe376bbe0 to 0xe376c000)
As it turns out, zsram needs to know the maximum memory size, which
is defined in MAX_PHYSMEM_BITS when CONFIG_SPARSEMEM is set, or in
MAX_POSSIBLE_PHYSMEM_BITS on the x86 architecture.
The same problem will be hit on all 32-bit architectures that have a
physical address space larger than 4GB and happen to not enable sparsemem
and include asm/sparsemem.h from asm/pgtable.h.
After the initial discussion, I suggested just always defining
MAX_POSSIBLE_PHYSMEM_BITS whenever CONFIG_PHYS_ADDR_T_64BIT is
set, or provoking a build error otherwise. This addresses all
configurations that can currently have this runtime bug, but
leaves all other configurations unchanged.
I looked up the possible number of bits in source code and
datasheets, here is what I found:
- on ARC, CONFIG_ARC_HAS_PAE40 controls whether 32 or 40 bits are used
- on ARM, CONFIG_LPAE enables 40 bit addressing, without it we never
support more than 32 bits, even though supersections in theory allow
up to 40 bits as well.
- on MIPS, some MIPS32r1 or later chips support 36 bits, and MIPS32r5
XPA supports up to 60 bits in theory, but 40 bits are more than
anyone will ever ship
- On PowerPC, there are three different implementations of 36 bit
addressing, but 32-bit is used without CONFIG_PTE_64BIT
- On RISC-V, the normal page table format can support 34 bit
addressing. There is no highmem support on RISC-V, so anything
above 2GB is unused, but it might be useful to eventually support
CONFIG_ZRAM for high pages.
Fixes: 61989a80fb ("staging: zsmalloc: zsmalloc memory allocation library")
Fixes: 02390b87a9 ("mm/zsmalloc: Prepare to variable MAX_PHYSMEM_BITS")
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/linux-mm/bdfa44bf1c570b05d6c70898e2bbb0acf234ecdf.1604762181.git.stefan@agner.ch/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS is available, the ftrace call
will be able to set the ip of the calling function. This will improve the
performance of live kernel patching where it does not need all the regs to
be stored just to change the instruction pointer.
If all archs that support live kernel patching also support
HAVE_DYNAMIC_FTRACE_WITH_ARGS, then the architecture specific function
klp_arch_set_pc() could be made generic.
It is possible that an arch can support HAVE_DYNAMIC_FTRACE_WITH_ARGS but
not HAVE_DYNAMIC_FTRACE_WITH_REGS and then have access to live patching.
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: live-patching@vger.kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
No reason having the same code in every architecture
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201103095858.087635810@linutronix.de
Add a non-NUMA definition for of_drconf_to_nid_single() to topology.h
so we have one even if powerpc/mm/numa.c is not compiled. On a
non-NUMA kernel the appropriate node id is always first_online_node.
Fixes: 72cdd117c4 ("pseries/hotplug-memory: hot-add: skip redundant LMB lookup")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Scott Cheloha <cheloha@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201105223040.3612663-1-cheloha@linux.ibm.com
When _PAGE_ACCESSED is not set, a minor fault is expected.
To do this, TLB miss exception ANDs _PAGE_PRESENT and _PAGE_ACCESSED
into the L2 entry valid bit.
To simplify the processing and reduce the number of instructions in
TLB miss exceptions, manage it as an APG bit and get it next to
_PAGE_GUARDED bit to allow a copy in one go. Then declare the
corresponding groups as handling all accesses as user accesses.
As the PP bits always define user as No Access, it will generate
a fault.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/80f488db230c6b0e7b3b990d72bd94a8a069e93e.1602492856.git.christophe.leroy@csgroup.eu
Andreas reported that commit ee0a49a687 ("powerpc/uaccess: Switch
__put_user_size_allowed() to __put_user_asm_goto()") broke
CLONE_CHILD_SETTID.
Further inspection showed that the put_user() in schedule_tail() was
missing entirely, the store not emitted by the compiler.
<.schedule_tail>:
mflr r0
std r0,16(r1)
stdu r1,-112(r1)
bl <.finish_task_switch>
ld r9,2496(r3)
cmpdi cr7,r9,0
bne cr7,<.schedule_tail+0x60>
ld r3,392(r13)
ld r9,1392(r3)
cmpdi cr7,r9,0
beq cr7,<.schedule_tail+0x3c>
li r4,0
li r5,0
bl <.__task_pid_nr_ns>
nop
bl <.calculate_sigpending>
nop
addi r1,r1,112
ld r0,16(r1)
mtlr r0
blr
nop
nop
nop
bl <.__balance_callback>
b <.schedule_tail+0x1c>
Notice there are no stores other than to the stack. There should be a
stw in there for the store to current->set_child_tid.
This is only seen with GCC 4.9 era compilers (tested with 4.9.3 and
4.9.4), and only when CONFIG_PPC_KUAP is disabled.
When CONFIG_PPC_KUAP=y, the inline asm that's part of the isync()
and mtspr() inlined via allow_user_access() seems to be enough to
avoid the bug.
We already have a macro to work around this (or a similar bug), called
asm_volatile_goto which includes an empty asm block to tickle the
compiler into generating the right code. So use that.
With this applied the code generation looks more like it will work:
<.schedule_tail>:
mflr r0
std r31,-8(r1)
std r0,16(r1)
stdu r1,-144(r1)
std r3,112(r1)
bl <._mcount>
nop
ld r3,112(r1)
bl <.finish_task_switch>
ld r9,2624(r3)
cmpdi cr7,r9,0
bne cr7,<.schedule_tail+0xa0>
ld r3,2408(r13)
ld r31,1856(r3)
cmpdi cr7,r31,0
beq cr7,<.schedule_tail+0x80>
li r4,0
li r5,0
bl <.__task_pid_nr_ns>
nop
li r9,-1
clrldi r9,r9,12
cmpld cr7,r31,r9
bgt cr7,<.schedule_tail+0x80>
lis r9,16
rldicr r9,r9,32,31
subf r9,r31,r9
cmpldi cr7,r9,3
ble cr7,<.schedule_tail+0x80>
li r9,0
stw r3,0(r31) <-- stw
nop
bl <.calculate_sigpending>
nop
addi r1,r1,144
ld r0,16(r1)
ld r31,-8(r1)
mtlr r0
blr
nop
bl <.__balance_callback>
b <.schedule_tail+0x30>
Fixes: ee0a49a687 ("powerpc/uaccess: Switch __put_user_size_allowed() to __put_user_asm_goto()")
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201104111742.672142-1-mpe@ellerman.id.au
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the emulation
of VSX loads. The affected CPUs were not widely available.
Two fixes for machine check handling in guests under PowerVM.
A fix for our recent changes to SMP setup, when CONFIG_CPUMASK_OFFSTACK=y.
Three fixes for races in the handling of some of our powernv sysfs attributes.
One change to remove TM from the set of Power10 CPU features.
A couple of other minor fixes.
Thanks to:
Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan Niethe, Mahesh
Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai, Srikar Dronamraju,
Vasant Hegde.
-----BEGIN PGP SIGNATURE-----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=LMZv
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- A fix for undetected data corruption on Power9 Nimbus <= DD2.1 in the
emulation of VSX loads. The affected CPUs were not widely available.
- Two fixes for machine check handling in guests under PowerVM.
- A fix for our recent changes to SMP setup, when
CONFIG_CPUMASK_OFFSTACK=y.
- Three fixes for races in the handling of some of our powernv sysfs
attributes.
- One change to remove TM from the set of Power10 CPU features.
- A couple of other minor fixes.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Ganesh Goudar, Jordan
Niethe, Mahesh Salgaonkar, Michael Neuling, Oliver O'Halloran, Qian Cai,
Srikar Dronamraju, Vasant Hegde.
* tag 'powerpc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: Avoid using addr_to_pfn in real mode
powerpc/uaccess: Don't use "m<>" constraint with GCC 4.9
powerpc/eeh: Fix eeh_dev_check_failure() for PE#0
powerpc/64s: Remove TM from Power10 features
selftests/powerpc: Make alignment handler test P9N DD2.1 vector CI load workaround
powerpc: Fix undetected data corruption with P9N DD2.1 VSX CI load emulation
powerpc/powernv/dump: Handle multiple writes to ack attribute
powerpc/powernv/dump: Fix race while processing OPAL dump
powerpc/smp: Use GFP_ATOMIC while allocating tmp mask
powerpc/smp: Remove unnecessary variable
powerpc/mce: Avoid nmi_enter/exit in real mode on pseries hash
powerpc/opal_elog: Handle multiple writes to ack attribute
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes
For x86, also included in this pull request is a new alternative and
(in the future) more scalable implementation of extended page tables
that does not need a reverse map from guest physical addresses to
host physical addresses. For now it is disabled by default because
it is still lacking a few of the existing MMU's bells and whistles.
However it is a very solid piece of work and it is already available
for people to hammer on it.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl+S8dsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM40Af+M46NJmuS5rcwFfybvK/c42KT6svX
Co1NrZDwzSQ2mMy3WQzH9qeLvb+nbY4sT3n5BPNPNsT+aIDPOTDt//qJ2/Ip9UUs
tRNea0MAR96JWLE7MSeeRxnTaQIrw/AAZC0RXFzZvxcgytXwdqBExugw4im+b+dn
Dcz8QxX1EkwT+4lTm5HC0hKZAuo4apnK1QkqCq4SdD2QVJ1YE6+z7pgj4wX7xitr
STKD6q/Yt/0ndwqS0GSGbyg0jy6mE620SN6isFRkJYwqfwLJci6KnqvEK67EcNMu
qeE017K+d93yIVC46/6TfVHzLR/D1FpQ8LZ16Yl6S13OuGIfAWBkQZtPRg==
=AD6a
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"For x86, there is a new alternative and (in the future) more scalable
implementation of extended page tables that does not need a reverse
map from guest physical addresses to host physical addresses.
For now it is disabled by default because it is still lacking a few of
the existing MMU's bells and whistles. However it is a very solid
piece of work and it is already available for people to hammer on it.
Other updates:
ARM:
- New page table code for both hypervisor and guest stage-2
- Introduction of a new EL2-private host context
- Allow EL2 to have its own private per-CPU variables
- Support of PMU event filtering
- Complete rework of the Spectre mitigation
PPC:
- Fix for running nested guests with in-kernel IRQ chip
- Fix race condition causing occasional host hard lockup
- Minor cleanups and bugfixes
x86:
- allow trapping unknown MSRs to userspace
- allow userspace to force #GP on specific MSRs
- INVPCID support on AMD
- nested AMD cleanup, on demand allocation of nested SVM state
- hide PV MSRs and hypercalls for features not enabled in CPUID
- new test for MSR_IA32_TSC writes from host and guest
- cleanups: MMU, CPUID, shared MSRs
- LAPIC latency optimizations ad bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (232 commits)
kvm: x86/mmu: NX largepage recovery for TDP MMU
kvm: x86/mmu: Don't clear write flooding count for direct roots
kvm: x86/mmu: Support MMIO in the TDP MMU
kvm: x86/mmu: Support write protection for nesting in tdp MMU
kvm: x86/mmu: Support disabling dirty logging for the tdp MMU
kvm: x86/mmu: Support dirty logging for the TDP MMU
kvm: x86/mmu: Support changed pte notifier in tdp MMU
kvm: x86/mmu: Add access tracking for tdp_mmu
kvm: x86/mmu: Support invalidate range MMU notifier for TDP MMU
kvm: x86/mmu: Allocate struct kvm_mmu_pages for all pages in TDP MMU
kvm: x86/mmu: Add TDP MMU PF handler
kvm: x86/mmu: Remove disallowed_hugepage_adjust shadow_walk_iterator arg
kvm: x86/mmu: Support zapping SPTEs in the TDP MMU
KVM: Cache as_id in kvm_memory_slot
kvm: x86/mmu: Add functions to handle changed TDP SPTEs
kvm: x86/mmu: Allocate and free TDP MMU roots
kvm: x86/mmu: Init / Uninit the TDP MMU
kvm: x86/mmu: Introduce tdp_iter
KVM: mmu: extract spte.h and spte.c
KVM: mmu: Separate updating a PTE from kvm_set_pte_rmapp
...
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
GCC 4.9 sometimes fails to build with "m<>" constraint in
inline assembly.
CC lib/iov_iter.o
In file included from ./arch/powerpc/include/asm/cmpxchg.h:6:0,
from ./arch/powerpc/include/asm/atomic.h:11,
from ./include/linux/atomic.h:7,
from ./include/linux/crypto.h:15,
from ./include/crypto/hash.h:11,
from lib/iov_iter.c:2:
lib/iov_iter.c: In function 'iovec_from_user.part.30':
./arch/powerpc/include/asm/uaccess.h:287:2: error: 'asm' operand has impossible constraints
__asm__ __volatile__( \
^
./include/linux/compiler.h:78:42: note: in definition of macro 'unlikely'
# define unlikely(x) __builtin_expect(!!(x), 0)
^
./arch/powerpc/include/asm/uaccess.h:583:34: note: in expansion of macro 'unsafe_op_wrap'
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
^
./arch/powerpc/include/asm/uaccess.h:329:10: note: in expansion of macro '__get_user_asm'
case 4: __get_user_asm(x, (u32 __user *)ptr, retval, "lwz"); break; \
^
./arch/powerpc/include/asm/uaccess.h:363:3: note: in expansion of macro '__get_user_size_allowed'
__get_user_size_allowed(__gu_val, __gu_addr, __gu_size, __gu_err); \
^
./arch/powerpc/include/asm/uaccess.h💯2: note: in expansion of macro '__get_user_nocheck'
__get_user_nocheck((x), (ptr), sizeof(*(ptr)), false)
^
./arch/powerpc/include/asm/uaccess.h:583:49: note: in expansion of macro '__get_user_allowed'
#define unsafe_get_user(x, p, e) unsafe_op_wrap(__get_user_allowed(x, p), e)
^
lib/iov_iter.c:1663:3: note: in expansion of macro 'unsafe_get_user'
unsafe_get_user(len, &uiov[i].iov_len, uaccess_end);
^
make[1]: *** [scripts/Makefile.build:283: lib/iov_iter.o] Error 1
Define a UPD_CONSTR macro that is "<>" by default and
only "" with GCC prior to GCC 5.
Fixes: fcf1f26895 ("powerpc/uaccess: Add pre-update addressing to __put_user_asm_goto()")
Fixes: 2f279eeb68 ("powerpc/uaccess: Add pre-update addressing to __get_user_asm() and __put_user_asm()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/212d3bc4a52ca71523759517bb9c61f7e477c46a.1603179582.git.christophe.leroy@csgroup.eu
ISA v3.1 removes transactional memory and hence it should not be present
in cpu_features or cpu_user_features2. Remove CPU_FTR_TM_COMP from
CPU_FTRS_POWER10. Remove PPC_FEATURE2_HTM_COMP and
PPC_FEATURE2_HTM_NOSC_COMP from COMMON_USER2_POWER10.
Fixes: a3ea40d5c7 ("powerpc: Add POWER10 architected mode")
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200827035529.900-1-jniethe5@gmail.com
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting it for
powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for detecting ISA
v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal Power9
systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about the
hardware topology on Power9/10, where two SMT4 cores can be presented by
firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(), to
prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Biwen
Li, Cameron Berkenpas, Cédric Le Goater, Christophe Leroy, Christoph Hellwig,
Colin Ian King, Daniel Axtens, David Dai, Finn Thain, Frederic Barrat, Gautham
R. Shenoy, Greg Kurz, Gustavo Romero, Ira Weiny, Jason Yan, Joel Stanley,
Jordan Niethe, Kajol Jain, Konrad Rzeszutek Wilk, Laurent Dufour, Leonardo
Bras, Liu Shixin, Luca Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar,
Nathan Lynch, Nicholas Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver
O'Halloran, Pedro Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai,
Qinglang Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott
Cheloha, Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
-----BEGIN PGP SIGNATURE-----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=akeX
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
powerpc used to set the pte specific flags in set_pte_at(). This is
different from other architectures. To be consistent with other
architecture update pfn_pte to set _PAGE_PTE on ppc64. Also, drop now
unused pte_mkpte.
We add a VM_WARN_ON() to catch the usage of calling set_pte_at() without
setting _PAGE_PTE bit. We will remove that after a few releases.
With respect to huge pmd entries, pmd_mkhuge() takes care of adding the
_PAGE_PTE bit.
[akpm@linux-foundation.org: whitespace fix, per Christophe]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lkml.kernel.org/r/20200902114222.181353-3-aneesh.kumar@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common
code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAl+IiPwLHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYPKEQ//TM8vxjucnRl/pklpMin49dJorwiVvROLhQqLmdxw
286ZKpVzYYAPc7LnNqwIBugnFZiXuHu8xPKQkIiOa2OtNDTwhKNoBxOAmOJaV6DD
8JfEtZYeX5mKJ/Nqd2iSkIqOvCwZ9Wzii+aytJ2U88wezQr1fnyF4X49MegETEey
FHWreSaRWZKa0MMRu9AQ0QxmoNTHAQUNaPc0PeqEtPULybfkGOGw4/ghSB7WcKrA
gtKTuooNOSpVEHkTas2TMpcBp6lxtOjFqKzVN0ml+/nqq5NeTSDx91VOCX/6Cj76
mXIg+s7fbACTk/BmkkwAkd0QEw4fo4tyD6Bep/5QNhvEoAriTuSRbhvLdOwFz0EF
vhkF0Rer6umdhSK7nPd7SBqn8kAnP4vBbdmB68+nc3lmkqysLyE4VkgkdH/IYYQI
6TJ0oilXWFmU6DT5Rm4FBqCvfcEfU2dUIHJr5wZHqrF2kLzoZ+mpg42fADoG4GuI
D/oOsz7soeaRe3eYfWybC0omGR6YYPozZJ9lsfftcElmwSsFrmPsbO1DM5IBkj1B
gItmEbOB9ZK3RhIK55T/3u1UWY3Uc/RVr+kchWvADGrWnRQnW0kxYIqDgiOytLFi
JZNH8uHpJIwzoJAv6XXSPyEUBwXTG+zK37Ce769HGbUEaUrE71MxBbQAQsK8mDpg
7fM=
=Bkf/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- rework the non-coherent DMA allocator
- move private definitions out of <linux/dma-mapping.h>
- lower CMA_ALIGNMENT (Paul Cercueil)
- remove the omap1 dma address translation in favor of the common code
- make dma-direct aware of multiple dma offset ranges (Jim Quinlan)
- support per-node DMA CMA areas (Barry Song)
- increase the default seg boundary limit (Nicolin Chen)
- misc fixes (Robin Murphy, Thomas Tai, Xu Wang)
- various cleanups
* tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits)
ARM/ixp4xx: add a missing include of dma-map-ops.h
dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling
dma-direct: factor out a dma_direct_alloc_from_pool helper
dma-direct check for highmem pages in dma_direct_alloc_pages
dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h>
dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma
dma-mapping: move dma-debug.h to kernel/dma/
dma-mapping: remove <asm/dma-contiguous.h>
dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h>
dma-contiguous: remove dma_contiguous_set_default
dma-contiguous: remove dev_set_cma_area
dma-contiguous: remove dma_declare_contiguous
dma-mapping: split <linux/dma-mapping.h>
cma: decrease CMA_ALIGNMENT lower limit to 2
firewire-ohci: use dma_alloc_pages
dma-iommu: implement ->alloc_noncoherent
dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods
dma-mapping: add a new dma_alloc_pages API
dma-mapping: remove dma_cache_sync
53c700: convert to dma_alloc_noncoherent
...
Pull compat quotactl cleanups from Al Viro:
"More Christoph's compat cleanups: quotactl(2)"
* 'work.quota-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
quota: simplify the quotactl compat handling
compat: add a compat_need_64bit_alignment_fixup() helper
compat: lift compat_s64 and compat_u64 to <asm-generic/compat.h>
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
