In drm_atomic_helper_check_crtc_state(), do not add a new plane state
to the global state if it does not exist already. Adding a new plane
state will result in overhead for the plane during the atomic-commit
step.
For the test in drm_atomic_helper_check_crtc_state() to succeed, it
is important that the CRTC has an enabled primary plane after the
commit. Simply testing the CRTC state's plane_mask for a primary plane
is sufficient.
Note that the helper still only tests for an attached primary plane.
Drivers have to ensure that the plane contains valid pixel information.
v5:
* fix commit description (Javier)
v3:
* test for a primary plane in plane_mask (Ville)
v2:
* remove unnecessary test for plane->crtc (Ville)
* inline drm_atomic_get_next_plane_state() (Ville)
* acquire plane lock before accessing plane->state (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: d6b9af1097 ("drm/atomic-helper: Add helper drm_atomic_helper_check_crtc_state()")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20221007124338.24152-2-tzimmermann@suse.de
Add register constants for the framebuffer scanout addresses and
update the related helper functions. No functional changes.
v2:
* extract address bytes with helper macros (Javier)
* fix comments
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-16-tzimmermann@suse.de
Use a damage iterator to process damage areas individually. Merging
damage areas can result in large updates of unchanged framebuffer
regions. As USB is rather slow, it's better to process damage areas
individually and hence minimize USB-transfered data.
As part of the change, move drm_gem_fb_{begin,end}_cpu_access() into
the plane's atomic_update helper. To avoid overhead and intermediate
writers, we want to synchronize buffers and reserve access only once
before copying damage areas of the framebuffer.
v2:
* clarify commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-11-tzimmermann@suse.de
Add drm_dev_enter() and drm_dev_exit() to the various modesetting
functions that interact with the device. After hot-unplugging the
device, these functions will return early. So far, the udl driver
relied on USB interfaces to handle unplugging of the device.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-10-tzimmermann@suse.de
Inline a modesetting helper in the CRTC's enable function. Build the
command set directly in the USB URB's buffer and drop an intermediate
buffer. No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-9-tzimmermann@suse.de
Replace simple-KMS helpers with regular atomic-modesetting helpers.
The simple-KMS helpers introduce a mid-layer abstraction without
added functionality. Using regular atomic helpers makes the driver's
implementation more discoverable and simplifies code sharing.
The conversion effectively open-codes the simple-KMS functions and
data structure within udl. No functional changes.
v2:
* don't use the atomic_disable plane helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-8-tzimmermann@suse.de
Add style fixes, better error handling and reporting, and minor
clean-up changes to the connector code before moving the code to
the rest of the modesetting pipeline.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-5-tzimmermann@suse.de
Set the USB control-message timeout to the USB default of 5 seconds.
Done for consistency with other uses of usb_control_msg() in udl and
other drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-4-tzimmermann@suse.de
The sku_pixel_limit is a per-device property, similar to the amount
of available video memory. Move the respective mode-valid test from
the connector to the mode-config structure.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221006095355.23579-3-tzimmermann@suse.de
The tile status modifiers can be combined with all of the usual
color buffer modifiers. When they are present an additional plane
is added to the surfaces to share the tile status buffer. The
TS modifiers describe the interpretation of the tag bits in this
buffer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220909093000.3458413-1-l.stach@pengutronix.de
The drm_atomic_helper_damage_merged() helper merges all the damage clips
into one rectangle. If there are multiple damage clips that aren't close
to each other, the resulting rectangle could be quite big.
Instead of using that function helper, iterate over all the damage clips
and update them one by one.
Suggested-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930152944.2584356-1-javierm@redhat.com
The current ast driver only supports legacy gamma interface.
This also fixes a Gnome3/Wayland error which incorrectly adds
gamma to atomic commit:
"Page flip discarded: CRTC property (GAMMA_LUT) not found"
I only tested remotely, so I wasn't able to check that it had
an effect on the VGA output. But when activating "Night Light"
in Gnome, ast_crtc_load_lut() is called.
v2: use the same functions as mgag200.
handle 16bits color mode.
v3: Check gamma_lut size in atomic check.
v4: revert 16bits mode, v1 was correct.
make sure gamma table are set when primary plane format
changes.
remove rgb888 format that is not used.
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930094754.745626-1-jfalempe@redhat.com
This chip can not handle aux defer if the host directly program
its aux registers to access edid/dpcd. So we need let software
to handle the aux defer situation.
Signed-off-by: Jason Yen <jason.yen@paradetech.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930042506.2529522-1-jason.yen@paradetech.corp-partner.google.com
Get rid of the confusing version_greater() stuff and
simply compare edid->revision directly everwhere. Half
the places already did it this way, and since we actually
reject any EDID with edid->version!=1 it's a perfectly
sane thing to do.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-9-ville.syrjala@linux.intel.com
For EDID 1.4 the first detailed timing is always preferred,
for older EDIDs there was a feature flag to indicate the same.
While correct, the code setting that up is rather confusing.
Restate it in a slightly more straightforward manner.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-8-ville.syrjala@linux.intel.com
Prefer the timing formula indicated by the range
descriptor for generating the non-DMT standard timings.
Previously we just used CVT for all EDID 1.4 continuous
frequency displays without even checking if the range
descriptor indicates otherwise. Now we check the range
descriptor first, and fall back to CVT if nothing else
was indicated. EDID 1.4 more or less deprecates GTF/GTF2
but there are still a lot of 1.4 EDIDs out there that
don't advertise CVT support, so seems safer to use the
formula the EDID actually reports as supported.
For EDID 1.3 we use GTF2 if indicated (as before), and for
EDID 1.2+ we now just use GTF without even checking the
feature flag. There seem to be quite a few EDIDs out there that
don't set the GTF feature flag but still include a GTF range
descriptor and non-DMT standard timings.
This to me seems to be roughly what appendix B of EDID 1.4
suggests should be done.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-7-ville.syrjala@linux.intel.com
Since we only use the parsed vrefresh range to determine
if VRR should be supported we should only accept continuous
frequency displays here.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-4-ville.syrjala@linux.intel.com
The current comment fails to clarify why we only accept
the "range limits only" variant of the range descriptor.
Reword it to make some actual sense.
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927170006.27855-2-ville.syrjala@linux.intel.com
Replace multiple log lines with a single log line at the end of
parsing HF-VSDB. Also use drm_dbg_kms instead of DRM_DBG_KMS, and
add log for DSC1.2 support.
v2: Fixed the formatting issues in the logging (Jani).
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-5-ankit.k.nautiyal@intel.com
DSC capabilities are given in bytes 11-13 of VSDB (i.e. bytes 8-10 of
SCDS). Since minimum length of Data block is 7, all bytes greater than 7
must be read only after checking the length of the data block.
This patch adds check for data block length before reading relavant DSC
bytes.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-4-ankit.k.nautiyal@intel.com
HF-VSDB/SCDB has bits to advertise support for 16, 12 and 10 bpc.
If none of the bits are set, the minimum bpc supported with DSC is 8.
This patch corrects the min bpc supported to be 8, instead of 0.
Fixes: 76ee7b9056 ("drm/edid: Parse DSC1.2 cap fields from HFVSDB block")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
v2: s/DSC1.2/DSC 1.2
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-2-ankit.k.nautiyal@intel.com
Document flags accepted by the page-flip and atomic IOCTLs.
v2 (Pekka):
- Mention DRM_EVENT_FLIP_COMPLETE in DRM_MODE_PAGE_FLIP_EVENT docs.
- Expand DRM_MODE_ATOMIC_NONBLOCK and DRM_MODE_ATOMIC_ALLOW_MODESET
description.
v3:
- Fix struct field ref syntax (Daniel)
- Clarify when artifacts are no longer displayed (Daniel)
- Add note about sinks deciding to show artifacts on their own (Pekka, Daniel)
v4:
- Fix typo (Pekka)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/505107/
Add atomic_pre_enable and atomic_post_disable callback to make sure the
bridge is not powered off until atomic_post_disable is called. This
prevents a power leakage when it6505 is powered off, but the upstream
DRM bridge is still sending display signals.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004044943.2407781-3-treapking@chromium.org
Use pm_runtime_(get|put)_sync to control the bridge power, and add
SET_SYSTEM_SLEEP_PM_OPS with pm_runtime_force_(suspend|resume) to it6505
driver. Without SET_SYSTEM_SLEEP_PM_OPS, the bridge will be powered on
unnecessarily when no external display is connected.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221004044943.2407781-2-treapking@chromium.org
When many entities are competing for the same run queue
on the same scheduler, we observe an unusually long wait
times and some jobs get starved. This has been observed on GPUVis.
The issue is due to the Round Robin policy used by schedulers
to pick up the next entity's job queue for execution. Under stress
of many entities and long job queues within entity some
jobs could be stuck for very long time in it's entity's
queue before being popped from the queue and executed
while for other entities with smaller job queues a job
might execute earlier even though that job arrived later
then the job in the long queue.
Fix:
Add FIFO selection policy to entities in run queue, chose next entity
on run queue in such order that if job on one entity arrived
earlier then job on another entity the first job will start
executing earlier regardless of the length of the entity's job
queue.
v2:
Switch to rb tree structure for entities based on TS of
oldest job waiting in the job queue of an entity. Improves next
entity extraction to O(1). Entity TS update
O(log N) where N is the number of entities in the run-queue
Drop default option in module control parameter.
v3:
Various cosmetical fixes and minor refactoring of fifo update function. (Luben)
v4:
Switch drm_sched_rq_select_entity_fifo to in order search (Luben)
v5: Fix up drm_sched_rq_select_entity_fifo loop (Luben)
v6: Add missing drm_sched_rq_remove_fifo_locked
v7: Fix ts sampling bug and more cosmetic stuff (Luben)
v8: Fix module parameter string (Luben)
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Direct Rendering Infrastructure - Development <dri-devel@lists.freedesktop.org>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Tested-by: Yunxiang Li (Teddy) <Yunxiang.Li@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220930041258.1050247-1-luben.tuikov@amd.com
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220929015503.17301-3-yuancan@huawei.com
The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.
Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch
Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge from the EDID that was read out from the display.
Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch
