- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZyjGagAKCRCKwlD9ZEnx
cHrRAPsETRczaN2vpy+9m0EJuN+QhlX980jiLYndIx8YUvMG3QD/XdLdG4MnGQtg
2x8u2BfbbXOIrV2YWErVIVn/bQNAMgk=
=FjWC
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7QOY
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
arm64: dts: renesas: r9a08g045: Add RTC node
arm64: dts: renesas: r9a08g045: Add VBATTB node
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
ARM: dts: renesas: r7s72100: Add DMA support to MMCIF
ARM: dts: renesas: r7s72100: Add DMAC node
arm64: dts: renesas: hihope: Drop #sound-dai-cells
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
arm64: dts: renesas: r9a09g057: Add OPP table
Link: https://lore.kernel.org/r/cover.1730726155.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MT8195 (also called MT8395)
- Enabled GPU support on Genio 1200 EVK
- Added sound-dai-cells for audio codec on MT8195 Cherry Chromebooks
MT8192:
- Added support Asurada Chromebook variants with Synaptics trackpad
MT8188 (also called MT8390):
- Added support for CPU DVFS, IOMMU, PWM hardware, SPMI bus,
Audio, socinfo, PCI-Express, DisplayPort, MIPI DSI, Ethernet,
Video HW Encoders (Stateful) and HW Decoders (Stateless),
JPEG HW Encoder/Decoder.
- Enabled GPU support on Genio 700 EVK
MT8183:
- Added support for Video HW Encoders (Stateful)
- Added HDMI support on MT8183 Pumpkin board
- Fixed some regulators to provide the actual description of the
power rails in MT8183 Kukui Chromebooks
- Disabled DPI display interface on MT8183 Kukui Chromebooks
to fix internal display probing
- Fixed address of EEPROM found on MT8183 Kakadu/Kodama Chromebooks
- Added SCL internal delay on I2C2 bus for improved I2C-HID devices
reliability on MT8183 Jacuzzi Chromebooks
MT7988:
- Added support for eFuses and UART controllers
Plus, addition of OF Graph support in MediaTek MMSYS and some cleanups
and dtbs_check fixes for MT8195 and for all machines using the MT6358
PMIC.
-----BEGIN PGP SIGNATURE-----
iJ4EABYKAEYWIQQn3Xxr56ypAcSHzXSaNgTPrZeEeAUCZyirxygcYW5nZWxvZ2lv
YWNjaGluby5kZWxyZWdub0Bjb2xsYWJvcmEuY29tAAoJEJo2BM+tl4R4k6sBAMmV
tJACZuinOzG29f+XCE9xNsQt2y73J6fYt9mfFda4AP9/R2tN4WboZeEiQu5kL3Ky
RT+b39DO3r6/PScwxifGAw==
=Uxfa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczy30ACgkQYKtH/8kJ
UifRSg/9FErCfPdgY3XeF+Dg/1Da3dfiIpUk7p+PAdqLsqGeLd+5O8PMSxlxaZ9U
Z+Rowu2dHnzfaOLGMg+syxAGHGrVLWzNrPYfMbR/dRLWhiVP8/CslBsc0BvKKiBy
efq+S9lmm90BtaY2W6i5+Gldfevo1XCtcR/LczOw+SbykwYfAa8McIVsn4TGLmcA
3OCFauGRJG2/WylIkMS8VDqei0wXXBfdRDs21gn/xK3fJgrU+dJY4xbYFwmghDpD
dZz1DaiZ5txyFXF814PnEing32wtEWESn9CtZ8QXLVeI7bpkgPfGVKvfbjfyNuZX
+oFD0aqQVQ2Hj9mUQQHjFLOm1qvmAor3yFfESma4BpHO0TgOhf2EPc44eMEtucfd
Ck5sL3y9uQdjil8rl8NVL9IsX42tI7xhUQ6UJp/wmf5vwGTmhz/ekq/ARA2Wv/MC
TwY9LMJVUu8iYN26Yev9/E8lPRNpgG218y3HHfiDMG+qf7gN/Cqms81VwSITcU79
dBQghJ9r8zcEo6BTnUeqX6VNucR60Ni+fDt7CQd41I/NUY555jzESJRi8EQ45Eja
/LxG/XW56sZkBwrp9qI1febMAYvqS6KjJ3Z0mgcO/PWzz5IDStpFjSnfxEhCh3+y
yCwaS+mRaSt/6ZMW+uvhYKZT2eb1udY2vPaPEu7HaMkbVkQ+UfU=
=dpjb
-----END PGP SIGNATURE-----
Merge tag 'mtk-dts64-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.13
MT8195 (also called MT8395)
- Enabled GPU support on Genio 1200 EVK
- Added sound-dai-cells for audio codec on MT8195 Cherry Chromebooks
MT8192:
- Added support Asurada Chromebook variants with Synaptics trackpad
MT8188 (also called MT8390):
- Added support for CPU DVFS, IOMMU, PWM hardware, SPMI bus,
Audio, socinfo, PCI-Express, DisplayPort, MIPI DSI, Ethernet,
Video HW Encoders (Stateful) and HW Decoders (Stateless),
JPEG HW Encoder/Decoder.
- Enabled GPU support on Genio 700 EVK
MT8183:
- Added support for Video HW Encoders (Stateful)
- Added HDMI support on MT8183 Pumpkin board
- Fixed some regulators to provide the actual description of the
power rails in MT8183 Kukui Chromebooks
- Disabled DPI display interface on MT8183 Kukui Chromebooks
to fix internal display probing
- Fixed address of EEPROM found on MT8183 Kakadu/Kodama Chromebooks
- Added SCL internal delay on I2C2 bus for improved I2C-HID devices
reliability on MT8183 Jacuzzi Chromebooks
MT7988:
- Added support for eFuses and UART controllers
Plus, addition of OF Graph support in MediaTek MMSYS and some cleanups
and dtbs_check fixes for MT8195 and for all machines using the MT6358
PMIC.
* tag 'mtk-dts64-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (55 commits)
arm64: dts: mediatek: mt8183-kukui: Drop bogus fixed regulators
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulators
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Fix DP bridge supply names
arm64: dts: mediatek: mt6358: fix dtbs_check error
arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarity
arm64: dts: mt8183: Damu: add i2c2's i2c-scl-internal-delay-ns
arm64: dts: mt8183: cozmo: add i2c2's i2c-scl-internal-delay-ns
arm64: dts: mt8183: burnet: add i2c2's i2c-scl-internal-delay-ns
arm64: dts: mt8183: fennel: add i2c2's i2c-scl-internal-delay-ns
dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
arm64: dts: mediatek: mt8186-corsola: Fix GPU supply coupling max-spread
arm64: dts: mediatek: mt8195-cherry: Use correct audio codec DAI
arm64: dts: mediatek: mt8188: Fix USB3 PHY port default status
arm64: dts: mediatek: mt8173-elm-hana: Add vdd-supply to second source trackpad
arm64: dts: mediatek: mt8186-corsola-voltorb: Merge speaker codec nodes
arm64: dts: mediatek: mt8390-genio-700-evk: Enable ethernet
arm64: dts: mediatek: mt8188: Add ethernet node
arm64: dts: mediatek: mt8188: Add eDP and DP TX nodes
arm64: dts: mediatek: mt8188: Add DP-INTF nodes
arm64: dts: mediatek: mt8188: Add display nodes for vdosys1
...
Link: https://lore.kernel.org/r/20241104112625.161365-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New device support: Boundary Device Nitrogen8MP, Kontron OSM-S i.MX8MP
SoM and BL carrier board, Verdin Ivy carrier board, DHCOM SoM on DRC02
and PicoITX, Gateworks GW82XX-2X, etc.
- A series from Carlos Song to add LPSPI alias for i.MX8 and i.MX9 SoCs
- A couple of changes from Ciprian Marian Costea to improve S32G uSDHC
and SD/eMMC support
- A couple of changes from Francesco Dolcini to improve SD regulator
startup delay for Verdin devices
- A bunch of changes from Frank Li to add I3C overlay for imx93-9x9-qsb,
enable PCIe and SATA for imx8qm-mek, add various devices for imx8qxp-mek,
fix dt-schema warnings, etc.
- A series from João Paulo Gonçalves to improve i.MX8 Apalis and i.MX8M
Verdin board support
- A set of changes from Laurentiu Mihalcea to enable dsp node for rproc
usage in audio subsystem
- A set of changes from Peng Fan to improve i.MX95 support, adding SCMI,
thermal zone, cooling device, idle states, etc.
- A series from Richard Zhu to add PCIe and SATA support for imx8dxl-evk
- A series from Shengjiu Wang to enable audio features on imx93-9x9-qsb
and imx8ulp-evk board
- Other small and random changes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcoizgUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6jYggAsMQHIPumLQ3dLKy69IwYFwQmWEYP
1GyElOGd1XZj92W8Oc6EYHq9AgMfEHCVgFS9MHKworpbgXZu3K2nloRjBK3BboUu
otxcoxfSo4bWRCazvmWHrpLuHxG9YEDgF0PfuKvNegt4fjr3MHmqO73N+FyvxZhe
DJWXkMZDmRWUPdWyCCcvNng0LNzrm9tYT4DgR6As4Tj3POfQ+YT/OZe+668KeNwe
te+yD5l+ymBSTAYQL8cICmALDkx/KUr3Vdqja16mw+OL54BmwsiVCaKRAVtYln6M
lDHJkNsWtFKi3j4Yt4JO1olQmbhmMjK045YdgEA34jF7b3COKhvgV/R1mg==
=8sHf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Frdo
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.13:
- New device support: Boundary Device Nitrogen8MP, Kontron OSM-S i.MX8MP
SoM and BL carrier board, Verdin Ivy carrier board, DHCOM SoM on DRC02
and PicoITX, Gateworks GW82XX-2X, etc.
- A series from Carlos Song to add LPSPI alias for i.MX8 and i.MX9 SoCs
- A couple of changes from Ciprian Marian Costea to improve S32G uSDHC
and SD/eMMC support
- A couple of changes from Francesco Dolcini to improve SD regulator
startup delay for Verdin devices
- A bunch of changes from Frank Li to add I3C overlay for imx93-9x9-qsb,
enable PCIe and SATA for imx8qm-mek, add various devices for imx8qxp-mek,
fix dt-schema warnings, etc.
- A series from João Paulo Gonçalves to improve i.MX8 Apalis and i.MX8M
Verdin board support
- A set of changes from Laurentiu Mihalcea to enable dsp node for rproc
usage in audio subsystem
- A set of changes from Peng Fan to improve i.MX95 support, adding SCMI,
thermal zone, cooling device, idle states, etc.
- A series from Richard Zhu to add PCIe and SATA support for imx8dxl-evk
- A series from Shengjiu Wang to enable audio features on imx93-9x9-qsb
and imx8ulp-evk board
- Other small and random changes
* tag 'imx-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (92 commits)
arm64: dts: freescale: imx8mp-verdin: Fix SD regulator startup delay
arm64: dts: freescale: imx8mm-verdin: Fix SD regulator startup delay
arm64: dts: imx8mp-verdin: add single-master property to all i2c nodes
arm64: dts: imx8mm-verdin: add single-master property to all i2c nodes
arm64: dts: imx95: Add missing vendor string to SCMI property
arm64: dts: imx8mp-navqp: Add HDMI support
arm64: dts: imx8qm-ss-hsio: fix PCI and SATA clock indices
arm64: dts: imx8qm-ss-hsio: fix interrupt-map indent under pci* nodes
arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0
arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in GPIO
arm64: dts: layerscape: remove en25s64 and only keep jedec,spi-nor compatible string
arm64: dts: imx8mp-kontron-dl: change touchscreen power-supply to AVDD28-supply
arm64: dts: imx8mp: Add Boundary Device Nitrogen8MP Universal SMARC Carrier Board
arm64: dts: imx8: move samsung,burst-clock-frequency to imx8mn and imx8mm mba8mx board file
arm64: dts: mba8mx: remove undocumented 'data-lanes' at panel
arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X support
arm64: dts: imx8ulp-evk: Add spdif sound card support
arm64: dts: imx8ulp-evk: Add bt-sco sound card support
arm64: dts: imx8ulp: Add audio device nodes
arm64: dts: imx8qm-mek: enable dsp node for rproc usage
...
Link: https://lore.kernel.org/r/20241104090055.1881860-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmcog3gUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7rYAf+IAD92c4ybmxaG5OmhNapvIla9DhE
97ag0d7otHmT2NVj8tWlvbyuA3YioxqkVengNEZ5gQ44aex70eroiknesF38ix81
PQcfgLTXcK5ElrubnfCIau5CJfH3a5STRUJvZdg4B2VX2Pclmz/N/Mc1l5CzqZth
xbi7Iuf8otjbq8RrvZ2Bu1GhEuXUrb9F+xBJAiVChlMLwapjgb8X6yPqfqouoiBa
sFJquqsc2+j+uj2cF/x/noljtwSlvhjM0Bs9BEDaXEkcS8zXV62Iq6AEBibWDwdy
Dw33psg+EdUeskIYWw+d3mYA4cQbSAAJ03i/lgYO0BaTgUMB46xVDvLf/g==
=WHH7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=WHOI
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.13:
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
* tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (39 commits)
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: dts: imx6sll: Improve gpc description
ARM: dts: imx6sl: Pass tempmon #thermal-sensor-cells
ARM: dts: imx6sx: Fix tempmon description
ARM: dts: imx6sll: Remove regulator-3p0 unit address
ARM: dts: imx6sll: Fix the last SPDIF clock name
ARM: dts: imx7ulp: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl: Remove incorrect mmc fallback compatible
ARM: dts: imx6sx: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl/sll: Add the "fsl,imx6dl-gpt" fallback
ARM: dts: imx6ul: Drop duplicate space in iomux node groups
ARM: dts: imx6sx: Align pin config nodes with bindings
ARM: dts: imx6sl: imx6sll: Align pin config nodes with bindings
ARM: dts: imx6qp: Align pin config nodes with bindings
ARM: dts: imx6qdl: Align pin config nodes with bindings
ARM: dts: imx6q: Align pin config nodes with bindings
ARM: dts: imx6dl: Align pin config nodes with bindings
ARM: dts: imx53: Align pin config nodes with bindings
ARM: dts: imx51: Align pin config nodes with bindings
ARM: dts: imx50: Align pin config nodes with bindings
...
Link: https://lore.kernel.org/r/20241104090055.1881860-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
-----BEGIN PGP SIGNATURE-----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=fOIQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=dKCF
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.13
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
* tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq4019: use nvmem-layout
ARM: dts: qcom: change labels to lower-case
ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: minor whitespace cleanup
ARM: dts: qcom: drop underscore in node names
Link: https://lore.kernel.org/r/20241104034744.14378-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for the Pinephone Pro and for consistencies sake it gets its own SoC
dtsi to not hide the specifics in the Pinephone Pro devicetree.
New boards: OrangePi-5b, NanoPi R3S, ArmSom Sige 5 (first rk3576 board),
Radxa e20c (first rk3528 board), Powkiddy RGB20SX, RK3588S-EVB1 and
the ArmSoM LM7 SoM with W3 carrier board.
HDMI support for rk3588 brings the first graphical output capability
there. This includes of course needed changes to a number of boards.
And finally a bunch of newly enabled peripherals on different boards,
as well as changes to adhere better to bindings and removal/change of
deprecated properties.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmchMHMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgWZRB/0a236rKxhltu2TqhZjElxGBwtUoIYvBDRL
iLL/WAltN2qbdUHbojzltsM2GDMDCmA6SJmbiY2p8colN+t/qTRY3vgnr1R7gpvU
QILcSHFVVI9inutLpfy+vq95gRafDSQ7YxyB4gLllokwIspJLPN4PL/7Wj1X8UWb
wipzaNiPUsmtWmFU/HWyrB7Msg1kqP80jhNeEv/khPvIRFfj7PhuL1+B00rozqaf
Aknqzded2eCTvqQLo7LH0o3bAchjIVvzSA7yxt/gQP0E+PerKp4xuFisGXjToo71
xrGpeU3j9cN6prglo1A92Lfpgbegk1IJGCzuxO+zL4uuIO6JRjYt
=7Um9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=RMLZ
-----END PGP SIGNATURE-----
Merge tag 'v6.13-armsoc/dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoCs: basic RK3528 support, RK3399S - a variant made specifically
for the Pinephone Pro and for consistencies sake it gets its own SoC
dtsi to not hide the specifics in the Pinephone Pro devicetree.
New boards: OrangePi-5b, NanoPi R3S, ArmSom Sige 5 (first rk3576 board),
Radxa e20c (first rk3528 board), Powkiddy RGB20SX, RK3588S-EVB1 and
the ArmSoM LM7 SoM with W3 carrier board.
HDMI support for rk3588 brings the first graphical output capability
there. This includes of course needed changes to a number of boards.
And finally a bunch of newly enabled peripherals on different boards,
as well as changes to adhere better to bindings and removal/change of
deprecated properties.
* tag 'v6.13-armsoc/dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (64 commits)
arm64: dts: rockchip: Add rk3588-orangepi-5b device tree
dt-bindings: arm: rockchip: Add Orange Pi 5b enum to Orange Pi 5 entry
arm64: dts: rockchip: refactor common Orange Pi 5 board
arm64: dts: rockchip: Remove 'enable-active-low' from two boards
arm64: dts: rockchip: add HDMI support to rk3588-jaguar
arm64: dts: rockchip: add HDMI support to rk3588-tiger-haikou
arm64: dts: rockchip: add HDMI pinctrl to rk3588-tiger SoM
arm64: dts: rockchip: reorder mmc aliases for NanoPi R3S
arm64: dts: rockchip: enable eMMC HS200 mode for NanoPi R3S
arm64: dts: rockchip: sort props in pmu_io_domains node for NanoPi R3S
arm64: dts: rockchip: replace deprecated snps,reset props for NanoPi R3S
arm64: dts: rockchip: fix model name for FriendlyElec NanoPi R3S
arm64: dts: rockchip: Enable HDMI0 on rock-5a
arm64: dts: rockchip: Enable HDMI0 on rk3588-nanopc-t6
arm64: dts: rockchip: pwm-leds for Orange Pi 5
arm64: dts: rockchip: reorder audio/hdmi nodes in Orange Pi 5
arm64: dts: rockchip: analog audio on Orange Pi 5
arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
arm64: dts: rockchip: Convert dts files used as parents to dtsi files
arm64: dts: rockchip: fix the pcie refclock oscillator on Rock 5 ITX
...
Link: https://lore.kernel.org/r/12542111.O9o76ZdvQC@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Add new SoC Samsung Exynos8895 and new board using it: Samsung
Galaxy S8 (SM-G950F) mobile phone. Only small support so far:
CPUs (Samsung Mongoose M2), main clock controllers (FSYS, PERIC,
TOP), pin controllers, SPI for cameras, timers.
2. Add new SoC Samsung Exynos990 and new board using it: Samsung
Galaxy Note20 5G (c1s/SM-N981B) mobile phone. Only minimal support
so far: CPUs (Samsung Mongoose M5), pin controllers, timers.
3. Prepare for adding new SoC Samsung Exynos9810 - add bindings. The
SoC DTSI was not yet ready, but it is posted on the mailing lists so
should come soon.
4. ExynosAutov920: Add several clock controllers.
-----BEGIN PGP SIGNATURE-----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=Vlqw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Rz3L
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.13
1. Add new SoC Samsung Exynos8895 and new board using it: Samsung
Galaxy S8 (SM-G950F) mobile phone. Only small support so far:
CPUs (Samsung Mongoose M2), main clock controllers (FSYS, PERIC,
TOP), pin controllers, SPI for cameras, timers.
2. Add new SoC Samsung Exynos990 and new board using it: Samsung
Galaxy Note20 5G (c1s/SM-N981B) mobile phone. Only minimal support
so far: CPUs (Samsung Mongoose M5), pin controllers, timers.
3. Prepare for adding new SoC Samsung Exynos9810 - add bindings. The
SoC DTSI was not yet ready, but it is posted on the mailing lists so
should come soon.
4. ExynosAutov920: Add several clock controllers.
* tag 'samsung-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding
dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible
dt-bindings: arm: cpus: Add Samsung Mongoose M3
arm64: dts: exynos8895: Add spi_0/1 nodes
arm64: dts: exynos8895: Add Multi Core Timer (MCT) node
arm64: dts: exynos8895: Add clock management unit nodes
dt-bindings: timer: exynos4210-mct: Add samsung,exynos8895-mct compatible
dt-bindings: clock: samsung: Add Exynos8895 SoC
arm64: dts: exynos: Add initial support for Samsung Galaxy Note20 5G (c1s)
arm64: dts: exynos: Add initial support for the Exynos 990 SoC
dt-bindings: arm: samsung: samsung-boards: Add bindings for Exynos 990 boards
dt-bindings: arm: cpus: Add Samsung Mongoose M5
arm64: dts: exynosautov920: add peric1, misc and hsi0/1 clock DT nodes
dt-bindings: clock: exynosautov920: add peric1, misc and hsi0/1 clock definitions
arm64: dts: exynos: Add initial support for Samsung Galaxy S8
arm64: dts: exynos: Add initial support for exynos8895 SoC
dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible
dt-bindings: arm: samsung: Document dreamlte board binding
dt-bindings: arm: cpus: Add Samsung Mongoose M2
Link: https://lore.kernel.org/r/20241029081002.21106-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Changes in this batch add an device tree file for the industrial module
version of the Jetson AGX Orin Developer Kit. There are also some fixes
for the Jetson TX1 and new features such as touchscreen, temperature
sensor and USB-C extcon support for Smaug (a.k.a. Pixel C).
-----BEGIN PGP SIGNATURE-----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=CFl4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BaL9
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.13-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.13-rc1
Changes in this batch add an device tree file for the industrial module
version of the Jetson AGX Orin Developer Kit. There are also some fixes
for the Jetson TX1 and new features such as touchscreen, temperature
sensor and USB-C extcon support for Smaug (a.k.a. Pixel C).
* tag 'tegra-for-6.13-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: smaug: Declare cros-ec extcon
arm64: tegra: Add SDMMC sdr104-offsets for Tegra X1
arm64: dts: nvidia: tegra210-smaug: Add TMP451 temperature sensor node
arm64: dts: nvidia: tegra210-smaug: Add touchscreen node
arm64: tegra: p2180: Add mandatory compatible for WiFi node
arm64: tegra: Create SKU8 AGX Orin board file
Link: https://lore.kernel.org/r/20241025150555.2558582-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZxJK7wAKCRCKwlD9ZEnx
cIc9AP9qfjKj9dER6XolPiFCNTVkQ4mUwXWSfw2tfcF7c14lQQEArTm1rPjJFnE6
ov1fEylEw6cf/lX63RAx1cO3b2RYOwQ=
=d+VK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=XVt1
-----END PGP SIGNATURE-----
Merge tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add gmac, mdio, and phy nodes to enable the gigabit Ethernet ports on
the TH1520 SoC-based BeagleV Ahead and Sipeed Lichee Pi 4a boards.
The dwmac-thead driver and dt binding have been accepted by netdev and
are in linux-next as well as the dts patch in this pull request. I have
tested next-20241108 on the Ahead and LPi4a boards, and Ethernet works
correctly.
Signed-off-by: Drew Fustini <drew@pdp7.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCZy7HegAKCRDb7CzD2Six
DFKlAP0bQEEODS17qnQ5o08MtzB7oi5zCbgCj5Dv9o4AMKd/VwD/SQftL0u53DR/
6/uaNCXcjlxVflOR7queyUexSu2TmAs=
=n4l7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=qfiW
-----END PGP SIGNATURE-----
Merge tag 'thead-dt-for-v6.13-p2' of https://github.com/pdp7/linux into soc/dt
T-HEAD Devicetrees for v6.13, part 2
Add gmac, mdio, and phy nodes to enable the gigabit Ethernet ports on
the TH1520 SoC-based BeagleV Ahead and Sipeed Lichee Pi 4a boards.
The dwmac-thead driver and dt binding have been accepted by netdev and
are in linux-next as well as the dts patch in this pull request. I have
tested next-20241108 on the Ahead and LPi4a boards, and Ethernet works
correctly.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.13-p2' of https://github.com/pdp7/linux:
riscv: dts: thead: Add TH1520 ethernet nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC. The
yaml binding and pinctrl-th1520 driver has been merged into next by
Linus W and will be included in the 6.13 pinctrl PR.
The TH1520 GPIO controllers are already supported by the gpio-dwapb
driver. This PR improves GPIO support by adding GPIO ranges and GPIO
line names for the BeagleV Ahead and LicheePi 4A boards. Support is
added for the built-in LEDs on the Ahead board.
Signed-off-by: Drew Fustini <drew@pdp7.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSy8G7QpEpV9aCf6Lbb7CzD2SixDAUCZxURbgAKCRDb7CzD2Six
DDMiAQD+joKsLCYlTe36dOFjgpZ5/K8tbjcXXoLe/3/HpFjG0wEArvUquuDjcxSa
op9RWVYs+TM9Xheyfgf+cMqL/XQynQ8=
=Ao5X
-----END PGP SIGNATURE-----
Merge tag 'thead-dt-for-v6.13' of https://github.com/pdp7/linux into soc/dt
T-HEAD Devicetrees for v6.13
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC. The
yaml binding and pinctrl-th1520 driver has been merged into next by
Linus W and will be included in the 6.13 pinctrl PR.
The TH1520 GPIO controllers are already supported by the gpio-dwapb
driver. This PR improves GPIO support by adding GPIO ranges and GPIO
line names for the BeagleV Ahead and LicheePi 4A boards. Support is
added for the built-in LEDs on the Ahead board.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.13' of https://github.com/pdp7/linux:
riscv: dts: thead: remove enabled property for spi0
riscv: dts: thead: Add missing GPIO clock-names
riscv: dtb: thead: Add BeagleV Ahead LEDs
riscv: dts: thead: Add TH1520 pinctrl settings for UART0
riscv: dts: thead: Add Lichee Pi 4M GPIO line names
riscv: dts: thead: Adjust TH1520 GPIO labels
riscv: dts: thead: Add TH1520 GPIO ranges
riscv: dts: thead: Add TH1520 pin control nodes
Add gmac, mdio, and phy nodes to enable the gigabit Ethernet ports on
the BeagleV Ahead and Sipeed Lichee Pi 4a boards.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[drew: change apb registers from syscon to second reg of gmac node,
add phy reset delay properties for beaglev ahead]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
A couple of the fixed regulators in the Kukui dtsi do not actually
exist in the hardware design; they are simply power rails connected
together with 0 ohm bridges.
Drop them and assign their upstream supplies to their consumers instead.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.
Add the supplies for each of the fixed regulators.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their
associated nodes are incorrectly named. In particular, the 1.0V supply
was modeled as a 1.2V supply.
Fix all the incorrect names, and also fix the voltage of the 1.0V
regulator.
Fixes: cabc71b08e ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fix DTBS check errors for 'mt6358codec' and 'mt6358regulator':
Error message is:
pmic: 'mt6358codec' and 'mt6358regulator' does not match any of the
regexes: 'pinctrl-[0-9]+'.
Rename these two device node to generic 'audio-codec' and 'regulators'.
Fixes: 9f88722216 ("arm64: dts: mt6358: add PMIC MT6358 related nodes")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20241029064647.13370-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The reset line of the IT6505 bridge chip is active low, not active high.
It was incorrectly inverted in the device tree as the implementation at
the time incorrectly inverted the polarity in its driver, due to a prior
device having an inline inverting level shifter.
Fix the polarity now while the external display pipeline is incomplete,
thereby avoiding any impact to running systems.
A matching fix for the driver should be included if this change is
backported.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241029100226.660263-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: a39ed23bdf ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
By default we expect all i2c nodes to be single-master, we do not have
any module or carrier board that uses multi-master mode on any i2c
controller. With this property set, we benefit from optimisations made
exclusively for single-masters.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
By default we expect all i2c nodes to be single-master, we do not have
any module or carrier board that uses multi-master mode on any i2c
controller. With this property set, we benefit from optimisations made
exclusively for single-masters.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The HDMI connector on the board is a micro-HDMI (type "d")
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The first argument of lpcg should indices, instead of index. Fix it by
use predefined macro.
Fixes: 9f7053f67c ("arm64: dts: imx8-ss-hsio: Add PCIe and SATA support")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update clock settings to use the macro IMX_LPCG_CLK_0 instead of the
hardcoded value 0. The first argument of lpcg is indices, not index.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the issue where both 'output-low' and 'output-high' exist under GPIO
hog nodes (rst_usb_hub_hog and sel_usb_hub_hog) when applying device
tree overlays. Since /delete-property/ is not supported in the overlays,
setting 'output-low' results in both properties being present. The
workaround is to disable these hogs and create new ones with 'output-low'
as needed.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl-mba8mx-usbotg.dtb: sel-usb-hub-hog:
{'output-low': True, 'gpio-hog': True, 'gpios': [[1, 0]], 'output-high': True, 'phandle': 108, '$nodename': ['sel-usb-hub-hog']}
is valid under each of {'required': ['output-low']}, {'required': ['output-high']
Fixes: 3f6fc30abe ("arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In jedec,spi-nor.yaml:
SPI NOR flashes compatible with the JEDEC SFDP standard or which may be
identified with the READ ID opcode (0x9F) do not deserve a specific
compatible. They should instead only be matched against the generic
"jedec,spi-nor" compatible.
en25s64 already in drivers/mtd/spi-nor/eon.c. So remove it safely and fix
below warning:
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: flash@2: compatible: 'oneOf' conditional failed, one must be fixed:
['en25s64', 'jedec,spi-nor'] is too long
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the touchscreen power-supply from 'power-supply' to 'AVDD28-supply' and
'VDDIO-supply' as per the binding documentation in goodix.yaml.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtb: touchscreen@5d:
'power-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds the DTSI file for the Nitrogen8MP SMARC System on Module which
is delivered with the Nitrogen8MP Universal SMARC Carrier Board.
Initial support includes:
- Serial console
- eMMC
- SD card
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move 'samsung,burst-clock-frequency' and 'samsung,esc-clock-frequency'
properties to i.MX8MN and i.MX8MM mba8mx board file. These properties are
not applicable to i.MX8MQ MIPI DSI, which uses the compatible string
'fsl,imx8mq-nwl-dsi'. The properties are only valid for i.MX8MM and i.MX8MN
devices with the compatible string 'fsl,imx8mm-mipi-dsim', as described in
samsung,mipi-dsim.yaml.
Fix warning:
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx-lvds-tm070jvhg33.dtb: dsi@30a00000:
Unevaluated properties are not allowed ('ports', 'samsung,burst-clock-frequency', 'samsung,esc-clock-frequency' were unexpected)
from schema $id: http://devicetree.org/schemas/display/bridge/nwl-dsi.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'data-lanes' is port0 of lvds bridge. Needn't set it for simple panel. Fix
below CHECK_DTBS warning:
arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-lvds-tm070jvhg33.dtb:
panel-lvds: port:endpoint: Unevaluated properties are not allowed ('data-lanes' was unexpected)
from schema $id: http://devicetree.org/schemas/display/panel/panel-simple.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Gateworks GW82XX-2X is an ARM based single board computer (SBC)
comprised of the i.MX8M Plus based gw702x SoM and the gw82xx baseboard
featuring:
- i.MX8M Plus SoC
- LPDDR4 DRAM
- eMMC FLASH
- Gateworks System Controller (GSC)
- microSD (1.8V/3.3V Capable)
- panel status bi-color LED
- pushbutton switch
- fan controller with tachometer
- USB Type-C connector
- PCIe switch
- 2x GbE RJ45 connectors
- multi-protocol RS232/RS485/RS422 Serial ports
- 2x Flexible Socket Adapters with SDIO/UART/USB/PCIe
(for M.2 and miniPCIe expansion)
- 2x isolated CAN
- GPS
- accelerometer
- magnetometer
- off-board connectors for: SPI, GPIO, I2C, ADC
- Wide range DC power input
- support for 802.3at PoE (via adapter)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add bt-sco sound card, which is used by BT HFP case.
It supports wb profile as default
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add edma1, sai4, sai5 device nodes bus of in per_bridge3.
Add edma2, sai6, sai7, spdif device nodes in bus of
per_bridge5.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set the status of the dsp node to "okay" and assign and add its reserved
memory regions.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT node for i.MX8QM's DSP, which is found in the VPU subsystem.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On i.MX8QM, the DSP is in the VPU subsystem, which means that using the
'dsp' node from 'imx8-ss-audio.dtsi' is wrong as it's placed under the
wrong bus. As such, drop it.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing dsp rproc-related reserved memory regions and assign them to
the 'dsp' node.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'dsp' node is currently configured for running an audio firmware.
Since the firmware requires that some audio-related IPs be disabled in
Linux, this will clash with the configurations from the imx8 board DTs
(i.e: imx8qm-mek, imx8qxp-mek, etc...), thus making the dsp unusable
(since the firmware won't function properly).
To avoid this issue, configure the 'dsp' node for rproc. This way, users
will be able to use the dsp alongside the board-level audio configuration
as long as the firmware doesn't need the audio IPs.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based
on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is
equipped with an i.MX6SLL SoC.
Expected to work:
- Buttons
- Wifi
- Bluetooth
(if Wifi is initialized first, driver does not handle regulators
yet)
- LED
- uSD
- USB
- RTC
- Touchscreen
Add human-readable comments for devices without mainlined driver and
binding. Such comments can e.g. be help to find testers if someone
starts to work on the missing drivers.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds compatible strings for the Kobo Clara 2E eBook reader.
There are two variants differing in the EPD PMIC used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
