Test verifier/direct_stack_access_wraparound.c automatically converted to use inline assembly.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230325025524.144043-18-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
prog_tests/verifier.c would be used as a host for verifier/*.c tests
migrated to use inline assembly and run from test_progs.
The run_test_aux() function mimics the test_verifier behavior
dropping CAP_SYS_ADMIN upon entry.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230325025524.144043-6-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Create a pair of sockets that utilize the congestion control algorithm
under a particular name. Then switch up this congestion control
algorithm to another implementation and check whether newly created
connections using the same cc name now run the new implementation.
Also, try to update a link with a struct_ops that is without
BPF_F_LINK or with a wrong or different name. These cases should fail
due to the violation of assumptions. To update a bpf_link of a
struct_ops, it must be replaced with another struct_ops that is
identical in type and name and has the BPF_F_LINK flag.
The other test case is to create links from the same struct_ops more
than once. It makes sure a struct_ops can be used repeatly.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Link: https://lore.kernel.org/r/20230323032405.3735486-9-kuifeng@meta.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Xu reports that after commit 3f50f132d8 ("bpf: Verifier, do explicit ALU32
bounds tracking"), the following BPF program is rejected by the verifier:
0: (61) r2 = *(u32 *)(r1 +0) ; R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2
3: (07) r1 += 1
4: (2d) if r1 > r3 goto pc+8
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff))
6: (18) r0 = 0x7fffffffffffff10
8: (0f) r1 += r0 ; R1_w=scalar(umin=0x7fffffffffffff10,umax=0x800000000000000f)
9: (18) r0 = 0x8000000000000000
11: (07) r0 += 1
12: (ad) if r0 < r1 goto pc-2
13: (b7) r0 = 0
14: (95) exit
And the verifier log says:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568
8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808
11: (07) r0 += 1 ; R0_w=-9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775810,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775822,umax=9223372036854775822,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-9223372036854775794 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775793
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775823,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
from 12 to 11: R0_w=-9223372036854775793 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff)) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775792
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775792 R1=scalar(umin=9223372036854775824,umax=9223372036854775823,var_off=(0x8000000000000000; 0xffffffff))
13: safe
[...]
The 64bit umin=9223372036854775810 bound continuously bumps by +1 while
umax=9223372036854775823 stays as-is until the verifier complexity limit
is reached and the program gets finally rejected. During this simulation,
the umin also eventually surpasses umax. Looking at the first 'from 12
to 11' output line from the loop, R1 has the following state:
R1_w=scalar(umin=0x8000000000000002 (9223372036854775810),
umax=0x800000000000000f (9223372036854775823),
var_off=(0x8000000000000000;
0xffffffff))
The var_off has technically not an inconsistent state but it's very
imprecise and far off surpassing 64bit umax bounds whereas the expected
output with refined known bits in var_off should have been like:
R1_w=scalar(umin=0x8000000000000002 (9223372036854775810),
umax=0x800000000000000f (9223372036854775823),
var_off=(0x8000000000000000;
0xf))
In the above log, var_off stays as var_off=(0x8000000000000000; 0xffffffff)
and does not converge into a narrower mask where more bits become known,
eventually transforming R1 into a constant upon umin=9223372036854775823,
umax=9223372036854775823 case where the verifier would have terminated and
let the program pass.
The __reg_combine_64_into_32() marks the subregister unknown and propagates
64bit {s,u}min/{s,u}max bounds to their 32bit equivalents iff they are within
the 32bit universe. The question came up whether __reg_combine_64_into_32()
should special case the situation that when 64bit {s,u}min bounds have
the same value as 64bit {s,u}max bounds to then assign the latter as
well to the 32bit reg->{s,u}32_{min,max}_value. As can be seen from the
above example however, that is just /one/ special case and not a /generic/
solution given above example would still not be addressed this way and
remain at an imprecise var_off=(0x8000000000000000; 0xffffffff).
The improvement is needed in __reg_bound_offset() to refine var32_off with
the updated var64_off instead of the prior reg->var_off. The reg_bounds_sync()
code first refines information about the register's min/max bounds via
__update_reg_bounds() from the current var_off, then in __reg_deduce_bounds()
from sign bit and with the potentially learned bits from bounds it'll
update the var_off tnum in __reg_bound_offset(). For example, intersecting
with the old var_off might have improved bounds slightly, e.g. if umax
was 0x7f...f and var_off was (0; 0xf...fc), then new var_off will then
result in (0; 0x7f...fc). The intersected var64_off holds then the
universe which is a superset of var32_off. The point for the latter is
not to broaden, but to further refine known bits based on the intersection
of var_off with 32 bit bounds, so that we later construct the final var_off
from upper and lower 32 bits. The final __update_reg_bounds() can then
potentially still slightly refine bounds if more bits became known from the
new var_off.
After the improvement, we can see R1 converging successively:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx(off=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
1: (61) r3 = *(u32 *)(r1 +4) ; R1=ctx(off=0,imm=0) R3_w=pkt_end(off=0,imm=0)
2: (bf) r1 = r2 ; R1_w=pkt(off=0,r=0,imm=0) R2_w=pkt(off=0,r=0,imm=0)
3: (07) r1 += 1 ; R1_w=pkt(off=1,r=0,imm=0)
4: (2d) if r1 > r3 goto pc+8 ; R1_w=pkt(off=1,r=1,imm=0) R3_w=pkt_end(off=0,imm=0)
5: (71) r1 = *(u8 *)(r2 +0) ; R1_w=scalar(umax=255,var_off=(0x0; 0xff)) R2_w=pkt(off=0,r=1,imm=0)
6: (18) r0 = 0x7fffffffffffff10 ; R0_w=9223372036854775568
8: (0f) r1 += r0 ; R0_w=9223372036854775568 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775823,s32_min=-240,s32_max=15)
9: (18) r0 = 0x8000000000000000 ; R0_w=-9223372036854775808
11: (07) r0 += 1 ; R0_w=-9223372036854775807
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775568,umax=9223372036854775809)
13: (b7) r0 = 0 ; R0_w=0
14: (95) exit
from 12 to 11: R0_w=-9223372036854775807 R1_w=scalar(umin=9223372036854775810,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775806
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775806 R1_w=-9223372036854775806
13: safe
from 12 to 11: R0_w=-9223372036854775806 R1_w=scalar(umin=9223372036854775811,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775805
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775805 R1_w=-9223372036854775805
13: safe
[...]
from 12 to 11: R0_w=-9223372036854775798 R1=scalar(umin=9223372036854775819,umax=9223372036854775823,var_off=(0x8000000000000008; 0x7),s32_min=8,s32_max=15,u32_min=8,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775797
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775797 R1=-9223372036854775797
13: safe
from 12 to 11: R0_w=-9223372036854775797 R1=scalar(umin=9223372036854775820,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775796
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775796 R1=-9223372036854775796
13: safe
from 12 to 11: R0_w=-9223372036854775796 R1=scalar(umin=9223372036854775821,umax=9223372036854775823,var_off=(0x800000000000000c; 0x3),s32_min=12,s32_max=15,u32_min=12,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775795
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775795 R1=-9223372036854775795
13: safe
from 12 to 11: R0_w=-9223372036854775795 R1=scalar(umin=9223372036854775822,umax=9223372036854775823,var_off=(0x800000000000000e; 0x1),s32_min=14,s32_max=15,u32_min=14,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775794
12: (ad) if r0 < r1 goto pc-2 ; R0_w=-9223372036854775794 R1=-9223372036854775794
13: safe
from 12 to 11: R0_w=-9223372036854775794 R1=-9223372036854775793 R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
11: (07) r0 += 1 ; R0_w=-9223372036854775793
12: (ad) if r0 < r1 goto pc-2
last_idx 12 first_idx 12
parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=scalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=1 stack=0 before 11: (07) r0 += 1
parent didn't have regs=1 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=scalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=1 stack=0 before 11: (07) r0 += 1
regs=1 stack=0 before 9: (18) r0 = 0x8000000000000000
last_idx 12 first_idx 12
parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775801 R1_r=Pscalar(umin=9223372036854775815,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2=pkt(off=0,r=1,imm=0) R3=pkt_end(off=0,imm=0) R10=fp0
last_idx 11 first_idx 11
regs=2 stack=0 before 11: (07) r0 += 1
parent didn't have regs=2 stack=0 marks: R0_rw=P-9223372036854775805 R1_rw=Pscalar(umin=9223372036854775812,umax=9223372036854775823,var_off=(0x8000000000000000; 0xf),s32_min=0,s32_max=15,u32_max=15) R2_w=pkt(off=0,r=1,imm=0) R3_w=pkt_end(off=0,imm=0) R10=fp0
last_idx 12 first_idx 0
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 12: (ad) if r0 < r1 goto pc-2
regs=2 stack=0 before 11: (07) r0 += 1
regs=2 stack=0 before 9: (18) r0 = 0x8000000000000000
regs=2 stack=0 before 8: (0f) r1 += r0
regs=3 stack=0 before 6: (18) r0 = 0x7fffffffffffff10
regs=2 stack=0 before 5: (71) r1 = *(u8 *)(r2 +0)
13: safe
from 4 to 13: safe
verification time 322 usec
stack depth 0
processed 56 insns (limit 1000000) max_states_per_insn 1 total_states 3 peak_states 3 mark_read 1
This also fixes up a test case along with this improvement where we match
on the verifier log. The updated log now has a refined var_off, too.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Xu Kuohai <xukuohai@huaweicloud.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230314203424.4015351-2-xukuohai@huaweicloud.com
Link: https://lore.kernel.org/bpf/20230322213056.2470-1-daniel@iogearbox.net
These tests expose the issue of being unable to properly check for errors
returned from inlined bpf map helpers that make calls to the bpf_map_ops
functions. At best, a check for zero or non-zero can be done but these
tests show it is not possible to check for a negative value or for a
specific error value.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-2-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To avoid more possible BPF dependencies with moving bitfields
around keep the fields BPF cares about right next to the offset
marker.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-4-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
vlan_present is gone since
commit 354259fa73 ("net: remove skb->vlan_present")
rename the offset field to what BPF is currently looking
for in this byte - mono_delivery_time and tc_at_ingress.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230321014115.997841-2-kuba@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Alexei noticed xdp_do_redirect test on BPF CI started failing on
BE systems after skb PP recycling was enabled:
test_xdp_do_redirect:PASS:prog_run 0 nsec
test_xdp_do_redirect:PASS:pkt_count_xdp 0 nsec
test_xdp_do_redirect:PASS:pkt_count_zero 0 nsec
test_xdp_do_redirect:FAIL:pkt_count_tc unexpected pkt_count_tc: actual
220 != expected 9998
test_max_pkt_size:PASS:prog_run_max_size 0 nsec
test_max_pkt_size:PASS:prog_run_too_big 0 nsec
close_netns:PASS:setns 0 nsec
#289 xdp_do_redirect:FAIL
Summary: 270/1674 PASSED, 30 SKIPPED, 1 FAILED
and it doesn't happen on LE systems.
Ilya then hunted it down to:
#0 0x0000000000aaeee6 in neigh_hh_output (hh=0x83258df0,
skb=0x88142200) at linux/include/net/neighbour.h:503
#1 0x0000000000ab2cda in neigh_output (skip_cache=false,
skb=0x88142200, n=<optimized out>) at linux/include/net/neighbour.h:544
#2 ip6_finish_output2 (net=net@entry=0x88edba00, sk=sk@entry=0x0,
skb=skb@entry=0x88142200) at linux/net/ipv6/ip6_output.c:134
#3 0x0000000000ab4cbc in __ip6_finish_output (skb=0x88142200, sk=0x0,
net=0x88edba00) at linux/net/ipv6/ip6_output.c:195
#4 ip6_finish_output (net=0x88edba00, sk=0x0, skb=0x88142200) at
linux/net/ipv6/ip6_output.c:206
xdp_do_redirect test places a u32 marker (0x42) right before the Ethernet
header to check it then in the XDP program and return %XDP_ABORTED if it's
not there. Neigh xmit code likes to round up hard header length to speed
up copying the header, so it overwrites two bytes in front of the Eth
header. On LE systems, 0x42 is one byte at `data - 4`, while on BE it's
`data - 1`, what explains why it happens only there.
It didn't happen previously due to that %XDP_PASS meant the page will be
discarded and replaced by a new one, but now it can be recycled as well,
while bpf_test_run code doesn't reinitialize the content of recycled
pages. This mark is limited to this particular test and its setup though,
so there's no need to predict 1000 different possible cases. Just move
it 4 bytes to the left, still keeping it 32 bit to match on more bytes.
Fixes: 9c94bbf9a8 ("xdp: recycle Page Pool backed skbs built from XDP frames")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/CAADnVQ+B_JOU+EpP=DKhbY9yXdN6GiRPnpTTXfEZ9sNkUeb-yQ@mail.gmail.com
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> # + debugging
Link: https://lore.kernel.org/bpf/8341c1d9f935f410438e79d3bd8a9cc50aefe105.camel@linux.ibm.com
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230316175051.922550-3-aleksander.lobakin@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that struct bpf_cpumask is RCU safe, there's no need for this kfunc.
Rather than doing the following:
private(MASK) static struct bpf_cpumask __kptr *global;
int BPF_PROG(prog, s32 cpu, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = bpf_cpumask_kptr_get(&global);
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_cpumask_release(cpumask);
bpf_rcu_read_unlock();
}
Programs can instead simply do (assume same global cpumask):
int BPF_PROG(prog, ...)
{
struct bpf_cpumask *cpumask;
bpf_rcu_read_lock();
cpumask = global;
if (!cpumask) {
bpf_rcu_read_unlock();
return -1;
}
bpf_cpumask_setall(cpumask);
...
bpf_rcu_read_unlock();
}
In other words, no extra atomic acquire / release, and less boilerplate
code.
This patch removes both the kfunc, as well as its selftests and
documentation.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-5-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that struct bpf_cpumask * is considered an RCU-safe type according
to the verifier, we should add tests that validate its common usages.
This patch adds those tests to the cpumask test suite. A subsequent
changes will remove bpf_cpumask_kptr_get(), and will adjust the selftest
and BPF documentation accordingly.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230316054028.88924-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In tcp_hdr_options test, it ensures the received tcp hdr option
and the sk local storage have the expected values. It uses memcmp
to check that. Testing the memcmp result with ASSERT_OK is confusing
because ASSERT_OK will print out the errno which is not set.
This patch uses ASSERT_EQ to check for 0 instead.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20230316000726.1016773-1-martin.lau@linux.dev
Adds a new test that tries to attach a program to fentry of two
functions of the same name, one located in vmlinux and the other in
bpf_testmod.
To avoid conflicts with existing tests, a new function
"bpf_fentry_shadow_test" was created both in vmlinux and in bpf_testmod.
The previous commit fixed a bug which caused this test to fail. The
verifier would always use the vmlinux function's address as the target
trampoline address, hence trying to create two trampolines for a single
address, which is forbidden.
The test (similarly to other fentry/fexit tests) is not working on arm64
at the moment.
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/5fe2f364190b6f79b085066ed7c5989c5bc475fa.1678432753.git.vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The canonical location for the tracefs filesystem is at
/sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many tests in the bpf selftest code still refer to this older debugfs
path, so let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230313205628.1058720-3-zwisler@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Merge commit bf9bec4cb3 ("Merge branch 'bpf: Allow reads from uninit stack'")
from bpf-next to bpf tree to address verification issues in some programs
due to stack usage.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new selftest, local_kptr_stash, which uses bpf_kptr_xchg to stash
a bpf_obj_new-allocated object in a map. Test the following scenarios:
* Stash two rb_nodes in an arraymap, don't unstash them, rely on map
free to destruct them
* Stash two rb_nodes in an arraymap, unstash the second one in a
separate program, rely on map free to destruct first
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230310230743.2320707-4-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The send_signal tracepoint tests are non-deterministically failing in
CI. The test works as follows:
1. Two pairs of file descriptors are created using the pipe() function.
One pair is used to communicate between a parent process -> child
process, and the other for the reverse direction.
2. A child is fork()'ed. The child process registers a signal handler,
notifies its parent that the signal handler is registered, and then
and waits for its parent to have enabled a BPF program that sends a
signal.
3. The parent opens and loads a BPF skeleton with programs that send
signals to the child process. The different programs are triggered by
different perf events (either NMI or normal perf), or by regular
tracepoints. The signal is delivered to the child whenever the child
triggers the program.
4. The child's signal handler is invoked, which sets a flag saying that
the signal handler was reached. The child then signals to the parent
that it received the signal, and the test ends.
The perf testcases (send_signal_perf{_thread} and
send_signal_nmi{_thread}) work 100% of the time, but the tracepoint
testcases fail non-deterministically because the tracepoint is not
always being fired for the child.
There are two tracepoint programs registered in the test:
'tracepoint/sched/sched_switch', and
'tracepoint/syscalls/sys_enter_nanosleep'. The child never intentionally
blocks, nor sleeps, so neither tracepoint is guaranteed to be triggered.
To fix this, we can have the child trigger the nanosleep program with a
usleep().
Before this patch, the test would fail locally every 2-3 runs. Now, it
doesn't fail after more than 1000 runs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230310061909.1420887-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a report that fib_lookup test is flaky when running in parallel.
A symptom of slowness or delay. An example:
Testing IPv6 stale neigh
set_lookup_params:PASS:inet_pton(IPV6_IFACE_ADDR) 0 nsec
test_fib_lookup:PASS:bpf_prog_test_run_opts 0 nsec
test_fib_lookup:FAIL:fib_lookup_ret unexpected fib_lookup_ret: actual 0 != expected 7
test_fib_lookup:FAIL:dmac not match unexpected dmac not match: actual 1 != expected 0
dmac expected 11:11:11:11:11:11 actual 00:00:00:00:00:00
[ Note that the "fib_lookup_ret unexpected fib_lookup_ret actual 0 ..."
is reversed in terms of expected and actual value. Fixing in this
patch also. ]
One possibility is the testing stale neigh entry was marked dead by the
gc (in neigh_periodic_work). The default gc_stale_time sysctl is 60s.
This patch increases it to 15 mins.
It also:
- fixes the reversed arg (actual vs expected) in one of the
ASSERT_EQ test
- removes the nodad command arg when adding v4 neigh entry which
currently has a warning.
Fixes: 168de02335 ("selftests/bpf: Add bpf_fib_lookup test")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230309060244.3242491-1-martin.lau@linux.dev
Implement a trivial iterator returning same specified integer value
N times as part of bpf_testmod kernel module. Add selftests to validate
everything works end to end.
We also reuse these tests as "verification-only" tests to validate that
kernel prints the state of custom kernel module-defined iterator correctly:
fp-16=iter_testmod_seq(ref_id=1,state=drained,depth=0)
"testmod_seq" part is an iterator type, and is coming from module's BTF
data dynamically at runtime.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-9-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add number iterator (bpf_iter_num_{new,next,destroy}()) tests,
validating the correct handling of various corner and common cases
*at runtime*.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add various tests for open-coded iterators. Some of them excercise
various possible coding patterns in C, some go down to low-level
assembly for more control over various conditions, especially invalid
ones.
We also make use of bpf_for(), bpf_for_each(), bpf_repeat() macros in
some of these tests.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bpf_for_each(), bpf_for(), and bpf_repeat() macros that make writing
open-coded iterator-based loops much more convenient and natural. These
macros utilize cleanup attribute to ensure proper destruction of the
iterator and thanks to that manage to provide the ergonomics that is
very close to C language's for() construct. Typical loop would look like:
int i;
int arr[N];
bpf_for(i, 0, N) {
/* verifier will know that i >= 0 && i < N, so could be used to
* directly access array elements with no extra checks
*/
arr[i] = i;
}
bpf_repeat() is very similar, but it doesn't expose iteration number and
is meant as a simple "repeat action N times" loop:
bpf_repeat(N) { /* whatever, N times */ }
Note that `break` and `continue` statements inside the {} block work as
expected.
bpf_for_each() is a generalization over any kind of BPF open-coded
iterator allowing to use for-each-like approach instead of calling
low-level bpf_iter_<type>_{new,next,destroy}() APIs explicitly. E.g.:
struct cgroup *cg;
bpf_for_each(cgroup, cg, some, input, args) {
/* do something with each cg */
}
would call (not-yet-implemented) bpf_iter_cgroup_{new,next,destroy}()
functions to form a loop over cgroups, where `some, input, args` are
passed verbatim into constructor as
bpf_iter_cgroup_new(&it, some, input, args).
As a first demonstration, add pyperf variant based on the bpf_for() loop.
Also clean up a few tests that either included bpf_misc.h header
unnecessarily from the user-space, which is unsupported, or included it
before any common types are defined (and thus leading to unnecessary
compilation warnings, potentially).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230308184121.1165081-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
