Merge series from Sakari Ailus <sakari.ailus@linux.intel.com>:
Late last year I posted a set to switch to __pm_runtime_mark_last_busy()
and gradually get rid of explicit pm_runtime_mark_last_busy() calls in
drivers, embedding them in the appropriate pm_runtime_*autosuspend*()
calls. The overall feedback I got at the time was that this is an
unnecessary intermediate step, and removing the
pm_runtime_mark_last_busy() calls can be done after adding them to the
relevant Runtime PM autosuspend related functions.
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250704075456.3222642-1-sakari.ailus@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a type promotion that can happen when freq(u32) variable is
comapared with sclk_target(integer), when sclk_target is a negative
value it promotes to a large postive integer which might not be a
problem in this particular case as the condition evaluates to false
when that happens, but bail out early when sclk_target has negative
error codes.
cs48l32_sclk_rates[i].freq >= sclk_target
Fix this by adding a negative error check when
snd_soc_tdm_params_to_bclk() fails
Fixes: e2bcbf99d0 ("ASoC: cs48l32: Add driver for Cirrus Logic CS48L32 audio DSP")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250603214813.197346-1-harshit.m.mogalapalli@oracle.com
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When building for a platform that does not support CONFIG_PM, such as
s390, cs48l32_runtime_{suspend,resume}() are unused because
SET_RUNTIME_PM_OPS does not reference its argument when CONFIG_PM is not
set:
sound/soc/codecs/cs48l32.c:3822:12: error: 'cs48l32_runtime_suspend' defined but not used [-Werror=unused-function]
3822 | static int cs48l32_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~
sound/soc/codecs/cs48l32.c:3779:12: error: 'cs48l32_runtime_resume' defined but not used [-Werror=unused-function]
3779 | static int cs48l32_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Use RUNTIME_PM_OPS and pm_ptr() to ensure these functions are seen as
used by the compiler but be dropped in the final object file when
CONFIG_PM is not set, matching the current behavior while clearing up
the warnings.
Fixes: e2bcbf99d0 ("ASoC: cs48l32: Add driver for Cirrus Logic CS48L32 audio DSP")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250418-cs48l32-modern-pm_ops-v1-1-640559407619@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a cs48l32_fll_err message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250416081204.36851-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a codec driver for the Cirrus Logic CS48L32 audio DSP.
The CS48L32 is a low-power audio DSP with microphone inputs for
"Always on Voice" (i.e. voice trigger) and voice command processing.
It has a programmable Halo Core DSP and a variety of power-efficient
fixed-function audio processors, with configurable digital mixing
and routing.
There are two I2S/TDM audio serial ports.
Four analogue inputs are available through IN1. These feed into a
2-channel ADC through an analogue mux. There is an ALSA control for
each IN1 ADC channel to select which analogue input to use.
A dedicated digital mic (DMIC) PDM input is available on IN2.
Two PDM outputs can feed DMIC inputs on another codec or a host DMIC/PDM
input.
An on-board regulator provides a power supply or bias voltage to
attached microphones. Three switchable MICBIAS outputs are fed from this
allowing only the microphone in use to be powered-up. There are DAPM
widgets for these outputs: MICBIAS1A, MICBIAS1B and MICBIAS1C. The machine
driver must create a DAPM route from the required MICBIAS1x widget to the
INn input widgets to make the MICBIAS switch on when the audio input is
powered-up. For example if the microphone feeding CS48L32 pin IN1LN_1 is
powered from MICBIAS1A, the machine driver must create the path:
(sink) IN1LN_1 <----- (source) MICBIAS1A
Co-developed-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com>
Co-developed-by: Qi Zhou <qi.zhou@cirrus.com>
Signed-off-by: Qi Zhou <qi.zhou@cirrus.com>
Co-developed-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Piotr Stankiewicz <piotrs@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250415115016.505777-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
