Correctly describe the interrupt as level low. Driver enforces that
anyways, but do not rely on that in the devicetree.
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar
to the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M)
are automotive SoCs.
- TI J722S is another automotive variant of its K3 family,
related to the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and
a SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them
from Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas
automotive SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet,
Game console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing hardware,
cleanups, and dtc compile time fixes. One notable change is the inclusion
of PowerVR SGX GPU nodes on TI SoCs.
-----BEGIN PGP SIGNATURE-----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=krkR
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC device tree updates from Arnd Bergmann:
"There is very little going on with new SoC support this time, all the
new chips are variations of others that we already support, and they
are all based on ARMv8 cores:
- Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are
networking SoCs designed to be used in wireless routers, similar to
the already supported MT7986A (Filogic 830).
- NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less.
These are used in many embedded and industrial applications.
- Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are
automotive SoCs.
- TI J722S is another automotive variant of its K3 family, related to
the AM62 series.
There are a total of 7 new arm32 machines and 45 arm64 ones, including
- Two Android phones based on the old Tegra30 chip
- Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a
SoM development board
- A set-top box using Amlogic Meson G12A S905X2
- Eight embedded board using NXP i.MX6/8/9
- Three machines using Mediatek network router chips
- Ten Chromebooks, all based on Mediatek MT8186
- One development board based on Mediatek MT8395 (Genio 1200)
- Seven tablets and phones based on Qualcomm SoCs, most of them from
Samsung.
- A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2)
- Three variants of the "White Hawk" board for Renesas automotive
SoCs
- Ten Rockchips RK35xx based machines, including NAS, Tablet, Game
console and industrial form factors.
- Three evaluation boards for TI K3 based SoCs
The other changes are mainly the usual feature additions for existing
hardware, cleanups, and dtc compile time fixes. One notable change is
the inclusion of PowerVR SGX GPU nodes on TI SoCs"
* tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits)
riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig
riscv: dts: starfive: jh7100: fix root clock names
ARM: dts: samsung: exynos4412: decrease memory to account for unusable region
arm64: dts: qcom: sm8250-xiaomi-elish: set rotation
arm64: dts: qcom: sm8650: Fix SPMI channels size
arm64: dts: qcom: sm8550: Fix SPMI channels size
arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433
arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure
arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector
dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk
dtc: Enable dtc interrupt_provider check
arm64: dts: st: add video encoder support to stm32mp255
arm64: dts: st: add video decoder support to stm32mp255
ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk
ARM: dts: stm32: enable CRC on stm32mp135f-dk
ARM: dts: stm32: add CRC on stm32mp131
ARM: dts: add stm32f769-disco-mb1166-reva09
ARM: dts: stm32: add display support on stm32f769-disco
ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
ARM: dts: stm32: add DSI support on stm32f769
...
- Update MAINTAINERS to use a public mailing list for NXP i.MX
development.
- Re-enable CONFIG_BACKLIGHT_CLASS_DEVICE in imx_v6_v7_defconfig to fix
a backlight regression.
- Remove DSI port endpoints from i.MX7 SoC DTSI to fix a display
regression.
- Fix LDB clocks property for i.MX8MP device tree.
- Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmXbTckUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM78BQf9GRuY8jwenOGOoUFksUJrZzl6a/nl
glYzNyq4t4i91xDE9rU+GtoQe+DjWgKYftiR2pgHNv/uCKIPO+6D4yfLG/eyQet9
Z1kknUg6kUndiOaWaZ3FiiY3JUoUWHjaXw2REY8ksyVpRQ2fVtSOI2IeFtqIqFuQ
X1Fx7slntIcbGpbc3iGzZVTi7+ucShYjaVUWUd588iayQsXyHLqz/RxYRVlaErYF
BElc5Nm+Auw+8Mr+jz2Q71dn+qOI806V+IvqrTGX8PauCk9WsF/TsYcm6MzrhgKh
4N+NNpqLY11Ty9i+K6OS6qE77jVZ9xxe2UUk0qfa8xWujIGFlLpl3e8q8A==
=0xer
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3Eab
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.8, round 2:
- Update MAINTAINERS to use a public mailing list for NXP i.MX
development.
- Re-enable CONFIG_BACKLIGHT_CLASS_DEVICE in imx_v6_v7_defconfig to fix
a backlight regression.
- Remove DSI port endpoints from i.MX7 SoC DTSI to fix a display
regression.
- Fix LDB clocks property for i.MX8MP device tree.
- Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM.
* tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp: Fix LDB clocks property
arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
MAINTAINERS: Use a proper mailinglist for NXP i.MX development
ARM: dts: imx7: remove DSI port endpoints
ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE
Link: https://lore.kernel.org/r/ZdtPJzdenRybI+Bq@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmXb+44UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7XrggAlnkIk0aNw4wTD2OLflPHgE0gD3PR
D2kn+tXx7iUEIv0JM7x4I4aOUOmZIKKSPn1KdJa1kyUAOxgrQR7bs80jsmmmSi57
GvVsAR7F/a7enOW1rQXqrCmWJgckD1d5Lb+z5b4JnkQsqQSbTwiyHwIzkRvlAGHK
zmuN5JSgYt0PKNYd5YylP0uvbnE0aYsDFyRhMxvRYNayb0t1w2gMoGDKc7mHrhXb
84hU9koauUNtzVH2xGH6G2P6PmdOJ6OhQoPIQ+ZCOWvBlAtKzelGGgaySFO3EKAu
RkZXqFi1RDofabwZq+aEXFFY7aNEHwkjLdYj0pFiAPRIhJ7cIrRUAGD+tg==
=7WYT
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZRvF
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree for 6.9:
- New board support: Apalis eval v1.2 carrier board, Variscite
VAR-SOM-MX93, phyBOARD-Segin-i.MX93.
- A series from Adam Ford to enable bluetooth, configure multiple queues
on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards.
- Several changesets from Alexander Stein to add i.MX8DXP support, enable
audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for
i.MX8MP, and improve MBA8xx board description.
- A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices.
- A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL
support, correcting edma3 power-domains and interrupt numbers, adding
I2C, FlexCAN and SMMU devices, etc.
- A series from Frieder Schrempf to improve imx8mm-kontron board
descriptions, disabling pulls, fixing up RTC device, adding EEPROM,
and refactoring OSM-S module, etc.
- A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut.
- A series from Shengjiu Wang to add PDM micphone and SPDIF sound card
support for imx8mm-evk board.
- A series of imx8mm-venice boards improvement from Tim Harvey to add
TPM device, fix USB OTG VBUS etc.
- Other small and random improvements on various boards.
* tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits)
arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible
arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy
arm64: dts: imx8mp-evk: Fix hdmi@3d node
arm64: dts: imx93-var-som: Remove phy-supply from eqos
arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO
arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines
arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node
arm64: dts: imx8mm-evk: Add spdif sound card support
arm64: dts: mba8xx: Add missing #interrupt-cells
arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC
arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay
arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply
arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator
arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration
arm64: dts: imx8mn: Slow default video_pll clock rate
arm64: dts: imx8mp-beacon: Configure multiple queues on eqos
arm64: dts: imx8mp-beacon: Enable Bluetooth
arm64: dts: freescale: minor whitespace cleanup
arm64: dts: lx2160a: Fix DTS for full PL011 UART
...
Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2.
- A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add
various devices, improve hardware descriptions and fix dt-schema
warnings, etc.
- Correct touchscreen rotation for imx6sl-tolino-shine2hd board.
- An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support.
- A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam.
- Enable usb3-lpm-capable for LS1021A usb3 node.
- A couple of imx6dl-yapp4 board improvements from Michal Vokáč.
- A series from Sebastian Reichel to improve imx6ull descriptions.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmXb9SsUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5mZggAn8fEfOw9G4uRmOQFee2aEtofqu48
bwd3dZyQVShJgJh6AgEQ1QeEvYOvpzIOmugleDMrcxAINuJ3YJfAPtY8dtrIcx88
0ZRiceeRKQVqI4h2HpJ/t0HRs8XsjadnnFtEtiJXt6YYmALk4cBVGzGbuDI6au66
HZ4HGqM4LGQUSVclV43vt7rZdXxewcLkBgQ5hOsQwQ2rzAWF5uTPRQF8I1kXkBN4
gHRamiwV6fqttHimMZNOhvLzl4Hmv5gcAWCIs9iD7nDLIY5VN0j9aiNunynWmA83
A7zGea4Sb/vbHt0dCcCDFwZ4z8rAewoSrCguaJ7h5xugjUWjckkPyQ/JYg==
=+Fvs
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iYGr
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree for 6.9:
- New board support: Sielaff i.MX6 Solo, Apalis Evaluation Board v1.2.
- A bunch of i.MX7 TQMA7/MBA7 updates from Alexander Stein that add
various devices, improve hardware descriptions and fix dt-schema
warnings, etc.
- Correct touchscreen rotation for imx6sl-tolino-shine2hd board.
- An imx53-qsb update from Dmitry Baryshkov to add HDMI expander support.
- A couple of i.MX1 and i.MX28 device node name fixes from Fabio Estevam.
- Enable usb3-lpm-capable for LS1021A usb3 node.
- A couple of imx6dl-yapp4 board improvements from Michal Vokáč.
- A series from Sebastian Reichel to improve imx6ull descriptions.
* tag 'imx-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits)
ARM: dts: nxp: imx: fix weim node name
ARM: dts: nxp: imx6ul: fix touchscreen node name
ARM: dts: nxp: imx6ul: xnur-gpio -> xnur-gpios
ARM: dts: imx6ul: Remove fsl,anatop from usbotg1
ARM: dts: imx6ull: fix pinctrl node name
ARM: dts: imx1-apf9328: Fix Ethernet node name
ARM: dts: imx28-evk: Use 'eeprom' as the node name
ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node
ARM: dts: imx6dl-yapp4: Move the internal switch PHYs under the switch node
ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
ARM: dts: imx6ul: Set macaddress location in ocotp
ARM: dts: imx53-qsb: add support for the HDMI expander
ARM: dts: imx6ull-dhcom: Remove /omit-if-no-ref/ from node usdhc1-pwrseq
ARM: dts: imx: Add support for Apalis Evaluation Board v1.2
ARM: dts: imx6: skov: add aliases for all ethernet nodes
ARM: dts: imx6qdl-hummingboard: Add rtc0 and rtc1 aliases to fix hctosys
ARM: dts: imx6dl: Add support for Sielaff i.MX6 Solo board
ARM: dts: imx6ul: Add missing #thermal-sensor-cells to tempmon
ARM: dts: imx6sl-tolino-shine2hd: fix touchscreen rotation
ARM: dts: imx6ull-dhcor: Remove 900MHz operating point
...
Link: https://lore.kernel.org/r/20240226034147.233993-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DT node names should be generic, so replace "weim" node name with
"memory-controller" in all i.MX SoC DT files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The canonical node name for touchscreens is "touchscreen",
so update the i.MX6UL "tsc" node accordingly.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Replace all "xnur-gpio" with "xnur-gpios" in the i.MX6UL(L) Touchscreen
node, since the -gpio suffix is deprecated. All known implementations of
this binding can handle -gpio and -gpios since day 1, so this should be
fully backwards compatible.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pinctrl node name must be either pinctrl or pinmux.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per davicom,dm9000.yaml, the Ethernet node name should be 'ethernet'.
Change it to fix the following schema warning:
imx1-apf9328.dtb: eth@4,c00000: $nodename:0: 'eth@4,c00000' does not match '^ethernet(@.*)?$'
from schema $id: http://devicetree.org/schemas/net/davicom,dm9000.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per at24.yaml, the node name should be 'eeprom'.
Change it accordingly to fix the following schema warning:
imx28-evk.dtb: at24@51: $nodename:0: 'at24@51' does not match '^eeprom@[0-9a-f]{1,2}$'
from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml#
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable USB3 HW LPM feature.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This fixes the display not working on colibri imx7, the driver fails to
load with the following error:
mxsfb 30730000.lcdif: error -ENODEV: Cannot connect bridge
NXP i.MX7 LCDIF is connected to both the Parallel LCD Display and to a
MIPI DSI IP block, currently it's not possible to describe the
connection to both.
Remove the port endpoint from the SOC dtsi to prevent regressions, this
would need to be defined on the board DTS.
Reported-by: Hiago De Franco <hiagofranco@gmail.com>
Closes: https://lore.kernel.org/r/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
Fixes: edbbae7fba ("ARM: dts: imx7: add MIPI-DSI support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We identified that the PHYs actually do not work since commit 7da7b84fee
("ARM: dts: imx6dl-yapp4: Move phy reset into switch node") as
a coincidence of several circumstances.
The reset signal is kept asserted by a pull-down resistor on the board
unless it is deasserted by GPIO from the SoC. This is to keep the switch
dead until it is configured properly by the kernel and user space.
Prior to the referenced commit the switch was reset by the FEC driver
and the reset GPIO was actively deasserted. The mdio-bus was scanned
and the attached switch and its PHYs were found and configured.
With the referenced commit the switch is reset by the qca8k driver.
Because of another bug in the qca8k driver, functionality of the reset
pin depends on its pre-kernel configuration. See commit c44fc98f0a
("net: dsa: qca8k: fix illegal usage of GPIO")
The problem did not appear until we removed support for the switch
and configuration of its reset pin from the bootloader.
To fix that, properly describe the internal mdio-bus configuration of
the qca8334 switch. The PHYs are internal to the switch and sit on its
internal mdio-bus.
Fixes: 7da7b84fee ("ARM: dts: imx6dl-yapp4: Move phy reset into switch node")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.
Fixes: 15b43e497f ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
If a bootloader does not configure the MAC address, devices come up with
a random MAC at the moment.
ocotp provides registers for storing the mac-address.
Configure those for i.MX6UL and i.MX6ULL allows net/core to retrieve it from
there.
Signed-off-by: Manuel Traut <manuel.traut@mt.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the MCIMXHDMICARD expansion card attached to the iMX53
QSB / QSRB platforms. This enables HDMI output on those devices.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> #Broadcom
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove /omit-if-no-ref/ from node usdhc1-pwrseq, because if the compile
flag -@ (include symbols) is used the node will always be there. In this
case, GPIO H is not released and therefore cannot be used. Therefore,
remove this node manually from the corresponding devicetree file and
don't rely on /omit-if-no-ref/.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for the new Apalis Evaluation Board v1.2. Because
only the imx6q-apalis-eval.dts was available, the imx6q-apalis-eval.dtsi
has been created which has common hardware configurations for v1.0, v1.1
and v1.2. Both imx6q-apalis-eval.dts and imx6q-apalis-eval-v1.2.dts
files include imx6q-apalis-eval.dtsi.
Versions 1.0 and 1.1 are compatible with each other and should
use imx6q-apalis-eval.dts file. Now for v1.2, the new device-tree file
should be used.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add aliases for all ethernet nodes including the switch. It makes it
easier to find this nodes by the boot loader.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix DWC3 USB VBUS glitch issue.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
HummingBoard has two RTCs, first integrated within SoC that can be used to
wake up from sleep - and a second on the carrier board including back-up
battery which is intended for keeping time during power-off.
Add aliases for both, ensuring that the battery-backed clock is primary
rtc and used by default during boot for restoring system time.
Fixes keeping time across power-cycle observed on Debian,
which sets RTC_HCTOSYS_DEVICE="rtc0".
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Sielaff i.MX6 Solo board is used as controller and user interface
in vending machines. It is based on the i.MX6 Solo SoC and features
the following peripherals and interfaces:
* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes the dtbs_check warning:
tempmon: '#thermal-sensor-cells' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The display is in landscape orientation, but the touchscreen is in portrait
orientation. Specify that properly in the devicetree.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Due to CPU lifetime consideration of the SoC manufacturer [1] and
the preferred area of operation in the industrial related
environment, set the maximum frequency for each DHCOM i.MX6ULL to
792MHz, as with the industrial type. This is done by removing the
operating point at 900MHz and set the clock-frequency to 792000000.
[1] https://www.nxp.com/docs/en/application-note/AN5337.pdf
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
regulator-*-microvolt is not the range the regulator supports, but the
range which the regulator is allowed to configure. Limit v33 rail to
3.3V only.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes the warnings:
pca953x 1-0020: supply vcc not found, using dummy regulator
lm75 0-0049: supply vs not found, using dummy regulator
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fixes the warnings:
at24 0-0050: supply vcc not found, using dummy regulator
at24 0-0056: supply vcc not found, using dummy regulator
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
These properties are only used on USB OTG/DR devices, remove them from
a host only device.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
temperature-sensor is the recommended node name and its main purpose.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is manufacturer data and shall not be modified.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SDMA is enabled by default, so remove the status property.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
USDHC3 is directly connected to an eMMC, so disable other interface modes.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
USDHC1 is directly connected to an SD card, so disable other interface modes.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
0x56 is the EEPROM component of SE97BTP.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the pin muxing and GPIO settings for SCL/SDA for i2c2 & i2c3.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the pin muxing and GPIO settings for SCL/SDA for i2c1.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ensure the RTC devices are numbered correctly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This allows using S10 for power down / shutdown.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I2C expander is capable of generating an IRQ during powersave, so the
attached buttons can be used for waking up the system.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
PCIE_DIS & PCIE_RST (correctly named W_DISABLE# & PERST#) affect USB
devices as well. So hog them to make USB devices attached to Mini PCIe
connector available, despite PCIe being disabled.
Supply voltages are enabled unconditionally.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Using internal PHY refclk is not supported yet.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
USB host is an HSIC interface directly connected to a USB hub. USB OTG2
is a direct connection to Mini PCIe interface without any OC signaling.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Split pinctrl as well. 'reset-deassert-us' is added with a small safe
margin.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
