linux/drivers/firmware/efi/libstub/arm-stub.c
Ard Biesheuvel f3cdfd239d arm64/efi: move SetVirtualAddressMap() to UEFI stub
In order to support kexec, the kernel needs to be able to deal with the
state of the UEFI firmware after SetVirtualAddressMap() has been called.
To avoid having separate code paths for non-kexec and kexec, let's move
the call to SetVirtualAddressMap() to the stub: this will guarantee us
that it will only be called once (since the stub is not executed during
kexec), and ensures that the UEFI state is identical between kexec and
normal boot.

This implies that the layout of the virtual mapping needs to be created
by the stub as well. All regions are rounded up to a naturally aligned
multiple of 64 KB (for compatibility with 64k pages kernels) and recorded
in the UEFI memory map. The kernel proper reads those values and installs
the mappings in a dedicated set of page tables that are swapped in during
UEFI Runtime Services calls.

Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
2015-01-12 16:29:12 +00:00

356 lines
10 KiB
C

/*
* EFI stub implementation that is shared by arm and arm64 architectures.
* This should be #included by the EFI stub implementation files.
*
* Copyright (C) 2013,2014 Linaro Limited
* Roy Franz <roy.franz@linaro.org
* Copyright (C) 2013 Red Hat, Inc.
* Mark Salter <msalter@redhat.com>
*
* This file is part of the Linux kernel, and is made available under the
* terms of the GNU General Public License version 2.
*
*/
#include <linux/efi.h>
#include <asm/efi.h>
#include "efistub.h"
static int __init efi_secureboot_enabled(efi_system_table_t *sys_table_arg)
{
static efi_guid_t const var_guid __initconst = EFI_GLOBAL_VARIABLE_GUID;
static efi_char16_t const var_name[] __initconst = {
'S', 'e', 'c', 'u', 'r', 'e', 'B', 'o', 'o', 't', 0 };
efi_get_variable_t *f_getvar = sys_table_arg->runtime->get_variable;
unsigned long size = sizeof(u8);
efi_status_t status;
u8 val;
status = f_getvar((efi_char16_t *)var_name, (efi_guid_t *)&var_guid,
NULL, &size, &val);
switch (status) {
case EFI_SUCCESS:
return val;
case EFI_NOT_FOUND:
return 0;
default:
return 1;
}
}
efi_status_t efi_open_volume(efi_system_table_t *sys_table_arg,
void *__image, void **__fh)
{
efi_file_io_interface_t *io;
efi_loaded_image_t *image = __image;
efi_file_handle_t *fh;
efi_guid_t fs_proto = EFI_FILE_SYSTEM_GUID;
efi_status_t status;
void *handle = (void *)(unsigned long)image->device_handle;
status = sys_table_arg->boottime->handle_protocol(handle,
&fs_proto, (void **)&io);
if (status != EFI_SUCCESS) {
efi_printk(sys_table_arg, "Failed to handle fs_proto\n");
return status;
}
status = io->open_volume(io, &fh);
if (status != EFI_SUCCESS)
efi_printk(sys_table_arg, "Failed to open volume\n");
*__fh = fh;
return status;
}
efi_status_t efi_file_close(void *handle)
{
efi_file_handle_t *fh = handle;
return fh->close(handle);
}
efi_status_t
efi_file_read(void *handle, unsigned long *size, void *addr)
{
efi_file_handle_t *fh = handle;
return fh->read(handle, size, addr);
}
efi_status_t
efi_file_size(efi_system_table_t *sys_table_arg, void *__fh,
efi_char16_t *filename_16, void **handle, u64 *file_sz)
{
efi_file_handle_t *h, *fh = __fh;
efi_file_info_t *info;
efi_status_t status;
efi_guid_t info_guid = EFI_FILE_INFO_ID;
unsigned long info_sz;
status = fh->open(fh, &h, filename_16, EFI_FILE_MODE_READ, (u64)0);
if (status != EFI_SUCCESS) {
efi_printk(sys_table_arg, "Failed to open file: ");
efi_char16_printk(sys_table_arg, filename_16);
efi_printk(sys_table_arg, "\n");
return status;
}
*handle = h;
info_sz = 0;
status = h->get_info(h, &info_guid, &info_sz, NULL);
if (status != EFI_BUFFER_TOO_SMALL) {
efi_printk(sys_table_arg, "Failed to get file info size\n");
return status;
}
grow:
status = sys_table_arg->boottime->allocate_pool(EFI_LOADER_DATA,
info_sz, (void **)&info);
if (status != EFI_SUCCESS) {
efi_printk(sys_table_arg, "Failed to alloc mem for file info\n");
return status;
}
status = h->get_info(h, &info_guid, &info_sz,
info);
if (status == EFI_BUFFER_TOO_SMALL) {
sys_table_arg->boottime->free_pool(info);
goto grow;
}
*file_sz = info->file_size;
sys_table_arg->boottime->free_pool(info);
if (status != EFI_SUCCESS)
efi_printk(sys_table_arg, "Failed to get initrd info\n");
return status;
}
void efi_char16_printk(efi_system_table_t *sys_table_arg,
efi_char16_t *str)
{
struct efi_simple_text_output_protocol *out;
out = (struct efi_simple_text_output_protocol *)sys_table_arg->con_out;
out->output_string(out, str);
}
/*
* This function handles the architcture specific differences between arm and
* arm64 regarding where the kernel image must be loaded and any memory that
* must be reserved. On failure it is required to free all
* all allocations it has made.
*/
efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
unsigned long *image_addr,
unsigned long *image_size,
unsigned long *reserve_addr,
unsigned long *reserve_size,
unsigned long dram_base,
efi_loaded_image_t *image);
/*
* EFI entry point for the arm/arm64 EFI stubs. This is the entrypoint
* that is described in the PE/COFF header. Most of the code is the same
* for both archictectures, with the arch-specific code provided in the
* handle_kernel_image() function.
*/
unsigned long __init efi_entry(void *handle, efi_system_table_t *sys_table,
unsigned long *image_addr)
{
efi_loaded_image_t *image;
efi_status_t status;
unsigned long image_size = 0;
unsigned long dram_base;
/* addr/point and size pairs for memory management*/
unsigned long initrd_addr;
u64 initrd_size = 0;
unsigned long fdt_addr = 0; /* Original DTB */
u64 fdt_size = 0; /* We don't get size from configuration table */
char *cmdline_ptr = NULL;
int cmdline_size = 0;
unsigned long new_fdt_addr;
efi_guid_t loaded_image_proto = LOADED_IMAGE_PROTOCOL_GUID;
unsigned long reserve_addr = 0;
unsigned long reserve_size = 0;
/* Check if we were booted by the EFI firmware */
if (sys_table->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE)
goto fail;
pr_efi(sys_table, "Booting Linux Kernel...\n");
/*
* Get a handle to the loaded image protocol. This is used to get
* information about the running image, such as size and the command
* line.
*/
status = sys_table->boottime->handle_protocol(handle,
&loaded_image_proto, (void *)&image);
if (status != EFI_SUCCESS) {
pr_efi_err(sys_table, "Failed to get loaded image protocol\n");
goto fail;
}
dram_base = get_dram_base(sys_table);
if (dram_base == EFI_ERROR) {
pr_efi_err(sys_table, "Failed to find DRAM base\n");
goto fail;
}
status = handle_kernel_image(sys_table, image_addr, &image_size,
&reserve_addr,
&reserve_size,
dram_base, image);
if (status != EFI_SUCCESS) {
pr_efi_err(sys_table, "Failed to relocate kernel\n");
goto fail;
}
/*
* Get the command line from EFI, using the LOADED_IMAGE
* protocol. We are going to copy the command line into the
* device tree, so this can be allocated anywhere.
*/
cmdline_ptr = efi_convert_cmdline(sys_table, image, &cmdline_size);
if (!cmdline_ptr) {
pr_efi_err(sys_table, "getting command line via LOADED_IMAGE_PROTOCOL\n");
goto fail_free_image;
}
status = efi_parse_options(cmdline_ptr);
if (status != EFI_SUCCESS)
pr_efi_err(sys_table, "Failed to parse EFI cmdline options\n");
/*
* Unauthenticated device tree data is a security hazard, so
* ignore 'dtb=' unless UEFI Secure Boot is disabled.
*/
if (efi_secureboot_enabled(sys_table)) {
pr_efi(sys_table, "UEFI Secure Boot is enabled.\n");
} else {
status = handle_cmdline_files(sys_table, image, cmdline_ptr,
"dtb=",
~0UL, (unsigned long *)&fdt_addr,
(unsigned long *)&fdt_size);
if (status != EFI_SUCCESS) {
pr_efi_err(sys_table, "Failed to load device tree!\n");
goto fail_free_cmdline;
}
}
if (fdt_addr) {
pr_efi(sys_table, "Using DTB from command line\n");
} else {
/* Look for a device tree configuration table entry. */
fdt_addr = (uintptr_t)get_fdt(sys_table);
if (fdt_addr)
pr_efi(sys_table, "Using DTB from configuration table\n");
}
if (!fdt_addr)
pr_efi(sys_table, "Generating empty DTB\n");
status = handle_cmdline_files(sys_table, image, cmdline_ptr,
"initrd=", dram_base + SZ_512M,
(unsigned long *)&initrd_addr,
(unsigned long *)&initrd_size);
if (status != EFI_SUCCESS)
pr_efi_err(sys_table, "Failed initrd from command line!\n");
new_fdt_addr = fdt_addr;
status = allocate_new_fdt_and_exit_boot(sys_table, handle,
&new_fdt_addr, dram_base + MAX_FDT_OFFSET,
initrd_addr, initrd_size, cmdline_ptr,
fdt_addr, fdt_size);
/*
* If all went well, we need to return the FDT address to the
* calling function so it can be passed to kernel as part of
* the kernel boot protocol.
*/
if (status == EFI_SUCCESS)
return new_fdt_addr;
pr_efi_err(sys_table, "Failed to update FDT and exit boot services\n");
efi_free(sys_table, initrd_size, initrd_addr);
efi_free(sys_table, fdt_size, fdt_addr);
fail_free_cmdline:
efi_free(sys_table, cmdline_size, (unsigned long)cmdline_ptr);
fail_free_image:
efi_free(sys_table, image_size, *image_addr);
efi_free(sys_table, reserve_size, reserve_addr);
fail:
return EFI_ERROR;
}
/*
* This is the base address at which to start allocating virtual memory ranges
* for UEFI Runtime Services. This is in the low TTBR0 range so that we can use
* any allocation we choose, and eliminate the risk of a conflict after kexec.
* The value chosen is the largest non-zero power of 2 suitable for this purpose
* both on 32-bit and 64-bit ARM CPUs, to maximize the likelihood that it can
* be mapped efficiently.
*/
#define EFI_RT_VIRTUAL_BASE 0x40000000
/*
* efi_get_virtmap() - create a virtual mapping for the EFI memory map
*
* This function populates the virt_addr fields of all memory region descriptors
* in @memory_map whose EFI_MEMORY_RUNTIME attribute is set. Those descriptors
* are also copied to @runtime_map, and their total count is returned in @count.
*/
void efi_get_virtmap(efi_memory_desc_t *memory_map, unsigned long map_size,
unsigned long desc_size, efi_memory_desc_t *runtime_map,
int *count)
{
u64 efi_virt_base = EFI_RT_VIRTUAL_BASE;
efi_memory_desc_t *out = runtime_map;
int l;
for (l = 0; l < map_size; l += desc_size) {
efi_memory_desc_t *in = (void *)memory_map + l;
u64 paddr, size;
if (!(in->attribute & EFI_MEMORY_RUNTIME))
continue;
/*
* Make the mapping compatible with 64k pages: this allows
* a 4k page size kernel to kexec a 64k page size kernel and
* vice versa.
*/
paddr = round_down(in->phys_addr, SZ_64K);
size = round_up(in->num_pages * EFI_PAGE_SIZE +
in->phys_addr - paddr, SZ_64K);
/*
* Avoid wasting memory on PTEs by choosing a virtual base that
* is compatible with section mappings if this region has the
* appropriate size and physical alignment. (Sections are 2 MB
* on 4k granule kernels)
*/
if (IS_ALIGNED(in->phys_addr, SZ_2M) && size >= SZ_2M)
efi_virt_base = round_up(efi_virt_base, SZ_2M);
in->virt_addr = efi_virt_base + in->phys_addr - paddr;
efi_virt_base += size;
memcpy(out, in, desc_size);
out = (void *)out + desc_size;
++*count;
}
}