linux/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
Johannes Berg 12a89f0177 wifi: iwlwifi: remove 'use_tfh' config to fix crash
This is equivalent to 'gen2', and it was always confusing to have
two identical config entries. The split config patch actually had
been originally developed after removing 'use_tfh" and didn't add
the use_tfh in the new configs as they'd later been copied to the
new files. Thus the easiest way to fix the init crash here now is
to just remove use_tfh (which is erroneously unset in most of the
configs now) and use 'gen2' in the code instead.

There's possibly still an unwind error in iwl_txq_gen2_init() as
it crashes if TXQ 0 fails to initialize, but we can deal with it
later since the original failure is due to the use_tfh confusion.

Tested-by: Xi Ruoyao <xry111@xry111.site>
Reported-and-tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-and-tested-by: Zhang Rui <rui.zhang@intel.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217622
Link: https://lore.kernel.org/all/9274d9bd3d080a457649ff5addcc1726f08ef5b2.camel@xry111.site/
Link: https://lore.kernel.org/all/CAAJw_Zug6VCS5ZqTWaFSr9sd85k%3DtyPm9DEE%2BmV%3DAKoECZM%2BsQ@mail.gmail.com/
Fixes: 19898ce9cf ("wifi: iwlwifi: split 22000.c into multiple files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230710145038.84186-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-11 20:26:06 -07:00

428 lines
15 KiB
C

// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
* Copyright (C) 2015-2017 Intel Deutschland GmbH
* Copyright (C) 2018-2023 Intel Corporation
*/
#include <linux/module.h>
#include <linux/stringify.h>
#include "iwl-config.h"
#include "iwl-prph.h"
#include "fw/api/txq.h"
/* Highest firmware API version supported */
#define IWL_22000_UCODE_API_MAX 77
/* Lowest firmware API version supported */
#define IWL_22000_UCODE_API_MIN 50
/* NVM versions */
#define IWL_22000_NVM_VERSION 0x0a1d
/* Memory offsets and lengths */
#define IWL_22000_DCCM_OFFSET 0x800000 /* LMAC1 */
#define IWL_22000_DCCM_LEN 0x10000 /* LMAC1 */
#define IWL_22000_DCCM2_OFFSET 0x880000
#define IWL_22000_DCCM2_LEN 0x8000
#define IWL_22000_SMEM_OFFSET 0x400000
#define IWL_22000_SMEM_LEN 0xD0000
#define IWL_QU_B_HR_B_FW_PRE "iwlwifi-Qu-b0-hr-b0"
#define IWL_QU_C_HR_B_FW_PRE "iwlwifi-Qu-c0-hr-b0"
#define IWL_QU_B_JF_B_FW_PRE "iwlwifi-Qu-b0-jf-b0"
#define IWL_QU_C_JF_B_FW_PRE "iwlwifi-Qu-c0-jf-b0"
#define IWL_QUZ_A_HR_B_FW_PRE "iwlwifi-QuZ-a0-hr-b0"
#define IWL_QUZ_A_JF_B_FW_PRE "iwlwifi-QuZ-a0-jf-b0"
#define IWL_CC_A_FW_PRE "iwlwifi-cc-a0"
#define IWL_QU_B_HR_B_MODULE_FIRMWARE(api) \
IWL_QU_B_HR_B_FW_PRE "-" __stringify(api) ".ucode"
#define IWL_QUZ_A_HR_B_MODULE_FIRMWARE(api) \
IWL_QUZ_A_HR_B_FW_PRE "-" __stringify(api) ".ucode"
#define IWL_QUZ_A_JF_B_MODULE_FIRMWARE(api) \
IWL_QUZ_A_JF_B_FW_PRE "-" __stringify(api) ".ucode"
#define IWL_QU_C_HR_B_MODULE_FIRMWARE(api) \
IWL_QU_C_HR_B_FW_PRE "-" __stringify(api) ".ucode"
#define IWL_QU_B_JF_B_MODULE_FIRMWARE(api) \
IWL_QU_B_JF_B_FW_PRE "-" __stringify(api) ".ucode"
#define IWL_CC_A_MODULE_FIRMWARE(api) \
IWL_CC_A_FW_PRE "-" __stringify(api) ".ucode"
static const struct iwl_base_params iwl_22000_base_params = {
.eeprom_size = OTP_LOW_IMAGE_SIZE_32K,
.num_of_queues = 512,
.max_tfd_queue_size = 256,
.shadow_ram_support = true,
.led_compensation = 57,
.wd_timeout = IWL_LONG_WD_TIMEOUT,
.max_event_log_size = 512,
.shadow_reg_enable = true,
.pcie_l1_allowed = true,
};
const struct iwl_ht_params iwl_22000_ht_params = {
.stbc = true,
.ldpc = true,
.ht40_bands = BIT(NL80211_BAND_2GHZ) | BIT(NL80211_BAND_5GHZ) |
BIT(NL80211_BAND_6GHZ),
};
#define IWL_DEVICE_22000_COMMON \
.ucode_api_min = IWL_22000_UCODE_API_MIN, \
.led_mode = IWL_LED_RF_STATE, \
.nvm_hw_section_num = 10, \
.non_shared_ant = ANT_B, \
.dccm_offset = IWL_22000_DCCM_OFFSET, \
.dccm_len = IWL_22000_DCCM_LEN, \
.dccm2_offset = IWL_22000_DCCM2_OFFSET, \
.dccm2_len = IWL_22000_DCCM2_LEN, \
.smem_offset = IWL_22000_SMEM_OFFSET, \
.smem_len = IWL_22000_SMEM_LEN, \
.features = IWL_TX_CSUM_NETIF_FLAGS | NETIF_F_RXCSUM, \
.apmg_not_supported = true, \
.trans.mq_rx_supported = true, \
.vht_mu_mimo_supported = true, \
.mac_addr_from_csr = 0x380, \
.ht_params = &iwl_22000_ht_params, \
.nvm_ver = IWL_22000_NVM_VERSION, \
.trans.rf_id = true, \
.trans.gen2 = true, \
.nvm_type = IWL_NVM_EXT, \
.dbgc_supported = true, \
.min_umac_error_event_table = 0x400000, \
.d3_debug_data_base_addr = 0x401000, \
.d3_debug_data_length = 60 * 1024, \
.mon_smem_regs = { \
.write_ptr = { \
.addr = LDBG_M2S_BUF_WPTR, \
.mask = LDBG_M2S_BUF_WPTR_VAL_MSK, \
}, \
.cycle_cnt = { \
.addr = LDBG_M2S_BUF_WRAP_CNT, \
.mask = LDBG_M2S_BUF_WRAP_CNT_VAL_MSK, \
}, \
}
#define IWL_DEVICE_22500 \
IWL_DEVICE_22000_COMMON, \
.ucode_api_max = IWL_22000_UCODE_API_MAX, \
.trans.device_family = IWL_DEVICE_FAMILY_22000, \
.trans.base_params = &iwl_22000_base_params, \
.gp2_reg_addr = 0xa02c68, \
.mon_dram_regs = { \
.write_ptr = { \
.addr = MON_BUFF_WRPTR_VER2, \
.mask = 0xffffffff, \
}, \
.cycle_cnt = { \
.addr = MON_BUFF_CYCLE_CNT_VER2, \
.mask = 0xffffffff, \
}, \
}
const struct iwl_cfg_trans_params iwl_qu_trans_cfg = {
.mq_rx_supported = true,
.rf_id = true,
.gen2 = true,
.device_family = IWL_DEVICE_FAMILY_22000,
.base_params = &iwl_22000_base_params,
.integrated = true,
.xtal_latency = 500,
.ltr_delay = IWL_CFG_TRANS_LTR_DELAY_200US,
};
const struct iwl_cfg_trans_params iwl_qu_medium_latency_trans_cfg = {
.mq_rx_supported = true,
.rf_id = true,
.gen2 = true,
.device_family = IWL_DEVICE_FAMILY_22000,
.base_params = &iwl_22000_base_params,
.integrated = true,
.xtal_latency = 1820,
.ltr_delay = IWL_CFG_TRANS_LTR_DELAY_1820US,
};
const struct iwl_cfg_trans_params iwl_qu_long_latency_trans_cfg = {
.mq_rx_supported = true,
.rf_id = true,
.gen2 = true,
.device_family = IWL_DEVICE_FAMILY_22000,
.base_params = &iwl_22000_base_params,
.integrated = true,
.xtal_latency = 12000,
.low_latency_xtal = true,
.ltr_delay = IWL_CFG_TRANS_LTR_DELAY_2500US,
};
/*
* If the device doesn't support HE, no need to have that many buffers.
* 22000 devices can split multiple frames into a single RB, so fewer are
* needed; AX210 cannot (but use smaller RBs by default) - these sizes
* were picked according to 8 MSDUs inside 256 A-MSDUs in an A-MPDU, with
* additional overhead to account for processing time.
*/
#define IWL_NUM_RBDS_NON_HE 512
#define IWL_NUM_RBDS_22000_HE 2048
/*
* All JF radio modules are part of the 9000 series, but the MAC part
* looks more like 22000. That's why this device is here, but called
* 9560 nevertheless.
*/
const struct iwl_cfg iwl9560_qu_b0_jf_b0_cfg = {
.fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
IWL_DEVICE_22500,
.num_rbds = IWL_NUM_RBDS_NON_HE,
};
const struct iwl_cfg iwl9560_qu_c0_jf_b0_cfg = {
.fw_name_pre = IWL_QU_C_JF_B_FW_PRE,
IWL_DEVICE_22500,
.num_rbds = IWL_NUM_RBDS_NON_HE,
};
const struct iwl_cfg iwl9560_quz_a0_jf_b0_cfg = {
.fw_name_pre = IWL_QUZ_A_JF_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_NON_HE,
};
const struct iwl_cfg_trans_params iwl_ax200_trans_cfg = {
.device_family = IWL_DEVICE_FAMILY_22000,
.base_params = &iwl_22000_base_params,
.mq_rx_supported = true,
.rf_id = true,
.gen2 = true,
.bisr_workaround = 1,
};
const char iwl_ax101_name[] = "Intel(R) Wi-Fi 6 AX101";
const char iwl_ax200_name[] = "Intel(R) Wi-Fi 6 AX200 160MHz";
const char iwl_ax201_name[] = "Intel(R) Wi-Fi 6 AX201 160MHz";
const char iwl_ax203_name[] = "Intel(R) Wi-Fi 6 AX203";
const char iwl_ax204_name[] = "Intel(R) Wi-Fi 6 AX204 160MHz";
const char iwl_ax200_killer_1650w_name[] =
"Killer(R) Wi-Fi 6 AX1650w 160MHz Wireless Network Adapter (200D2W)";
const char iwl_ax200_killer_1650x_name[] =
"Killer(R) Wi-Fi 6 AX1650x 160MHz Wireless Network Adapter (200NGW)";
const char iwl_ax201_killer_1650s_name[] =
"Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201D2W)";
const char iwl_ax201_killer_1650i_name[] =
"Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)";
const struct iwl_cfg iwl_qu_b0_hr1_b0 = {
.fw_name_pre = IWL_QU_B_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.tx_with_siso_diversity = true,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_qu_b0_hr_b0 = {
.fw_name_pre = IWL_QU_B_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_ax201_cfg_qu_hr = {
.name = "Intel(R) Wi-Fi 6 AX201 160MHz",
.fw_name_pre = IWL_QU_B_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_qu_c0_hr1_b0 = {
.fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.tx_with_siso_diversity = true,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_qu_c0_hr_b0 = {
.fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_ax201_cfg_qu_c0_hr_b0 = {
.name = "Intel(R) Wi-Fi 6 AX201 160MHz",
.fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_quz_a0_hr1_b0 = {
.fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.tx_with_siso_diversity = true,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_ax201_cfg_quz_hr = {
.name = "Intel(R) Wi-Fi 6 AX201 160MHz",
.fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_ax1650s_cfg_quz_hr = {
.name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201D2W)",
.fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_ax1650i_cfg_quz_hr = {
.name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)",
.fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_ax200_cfg_cc = {
.fw_name_pre = IWL_CC_A_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg killer1650s_2ax_cfg_qu_b0_hr_b0 = {
.name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201NGW)",
.fw_name_pre = IWL_QU_B_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg killer1650i_2ax_cfg_qu_b0_hr_b0 = {
.name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201D2W)",
.fw_name_pre = IWL_QU_B_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg killer1650s_2ax_cfg_qu_c0_hr_b0 = {
.name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201NGW)",
.fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg killer1650i_2ax_cfg_qu_c0_hr_b0 = {
.name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201D2W)",
.fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
const struct iwl_cfg iwl_cfg_quz_a0_hr_b0 = {
.fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
IWL_DEVICE_22500,
/*
* This device doesn't support receiving BlockAck with a large bitmap
* so we need to restrict the size of transmitted aggregation to the
* HT size; mac80211 would otherwise pick the HE max (256) by default.
*/
.max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
.num_rbds = IWL_NUM_RBDS_22000_HE,
};
MODULE_FIRMWARE(IWL_QU_B_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QU_C_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QU_B_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QUZ_A_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QUZ_A_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_CC_A_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));