linux/drivers/thermal
Sumeet Pawnikar ef63b043ac thermal: intel: pch: fix S0ix failure due to PCH temperature above threshold
When system tries to enter S0ix suspend state, just after active load
scenarios, it fails due to PCH current temperature is higher than set
threshold.
This patch introduces delay loop mechanism that allows PCH temperature
to go down below threshold during suspend so it won't fail to enter S0ix.
Add delay loop timeout and count as module parameters for user to tune it,
if required based on system design. This change notifies the different
warning messages like when PCH temperature above the threshold and
executing delay loop. Also, notify the messages when it success or
failure for S0ix entry.
Previously out of 1000 runs around 3 to 5 times it might fail to enter
S0ix just after heavy workload. With this change, S0ix failures reduced
as PCH cools down below threshold.

Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20201106170633.20838-1-sumeet.r.pawnikar@intel.com
2020-11-07 19:02:31 +01:00
..
broadcom
intel thermal: intel: pch: fix S0ix failure due to PCH temperature above threshold 2020-11-07 19:02:31 +01:00
qcom - Fix bogus thermal shutdowns for omap4430 where bogus values 2020-09-04 12:49:03 -07:00
samsung
st thermal: stm32: simplify the return expression of stm_thermal_prepare() 2020-10-12 12:08:35 +02:00
tegra
ti-soc-thermal thermal: ti-soc-thermal: Enable addition power management 2020-10-12 12:08:36 +02:00
amlogic_thermal.c
armada_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
cpufreq_cooling.c thermal: cooling: Remove unused variable *tz 2020-10-12 12:08:36 +02:00
cpuidle_cooling.c thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns 2020-10-12 12:08:35 +02:00
da9062-thermal.c thermal: Use mode helpers in drivers 2020-06-29 20:26:36 +02:00
db8500_thermal.c
devfreq_cooling.c thermal: cooling: Remove unused variable *tz 2020-10-12 12:08:36 +02:00
dove_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
gov_bang_bang.c
gov_fair_share.c
gov_power_allocator.c thermal: core: Move power_actor_set_power into IPA 2020-10-27 09:44:32 +01:00
gov_step_wise.c
gov_user_space.c
hisi_thermal.c thermal: Use mode helpers in drivers 2020-06-29 20:26:36 +02:00
imx8mm_thermal.c thermal: imx8mm: Use dev_err_probe() to simplify error handling 2020-10-12 12:08:35 +02:00
imx_sc_thermal.c - Add the hwmon support on the i.MX SC (Anson Huang) 2020-06-12 14:10:21 -07:00
imx_thermal.c thermal: imx: Use dev_err_probe() to simplify error handling 2020-10-12 12:08:34 +02:00
k3_bandgap.c
Kconfig thermal: Kconfig: Update description for RCAR_GEN3_THERMAL config 2020-10-12 12:08:35 +02:00
khadas_mcu_fan.c thermal: Add support for the MCU controlled FAN on Khadas boards 2020-06-25 07:44:20 +01:00
kirkwood_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
Makefile - Core Frameworks 2020-08-15 08:09:38 -07:00
max77620_thermal.c
mtk_thermal.c thermal: mtk_thermal: make device_reset optional 2020-10-27 11:19:18 +01:00
qoriq_thermal.c
rcar_gen3_thermal.c - Add support to enable/disable the thermal zones resulting on core code and 2020-08-06 18:10:55 -07:00
rcar_thermal.c thermal/drivers/rcar: Replace spin_lock_irqsave by spin_lock in hard IRQ 2020-10-27 10:45:22 +01:00
rockchip_thermal.c thermal: Use mode helpers in drivers 2020-06-29 20:26:36 +02:00
spear_thermal.c thermal: Explicitly enable non-changing thermal zone devices 2020-06-29 20:26:37 +02:00
sprd_thermal.c - Add support to enable/disable the thermal zones resulting on core code and 2020-08-06 18:10:55 -07:00
sun8i_thermal.c thermal: sun8i: Add A100's THS controller support 2020-10-12 12:08:36 +02:00
tango_thermal.c
thermal-generic-adc.c
thermal_core.c drivers/thermal/core: Optimize trip points check 2020-10-27 09:53:19 +01:00
thermal_core.h thermal: core: Move power_actor_set_power into IPA 2020-10-27 09:44:32 +01:00
thermal_helpers.c thermal: core: Add notifications call in the framework 2020-07-07 15:55:22 +02:00
thermal_hwmon.c
thermal_hwmon.h
thermal_mmio.c
thermal_netlink.c - Fix Kconfig typo "acces" -> "access" (Colin Ian King) 2020-10-17 10:40:22 -07:00
thermal_netlink.h thermal: netlink: Improve the initcall ordering 2020-07-21 10:40:08 +02:00
thermal_of.c thermal: Simplify or eliminate unnecessary set_mode() methods 2020-06-29 20:26:39 +02:00
thermal_sysfs.c thermal: Use kobj_to_dev() instead of container_of() 2020-10-12 12:08:35 +02:00
uniphier_thermal.c
zx2967_thermal.c