mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-04 00:06:36 +00:00

Currently we have architecture-specific fd_inb() and fd_outb() functions or macros, taking just a port which is in fact made of a base address and a register. The base address is FDC-specific and derived from the local or global "fdc" variable through the FD_IOPORT macro used in the base address calculation. This change splits this by explicitly passing the FDC's base address and the register separately to fd_outb() and fd_inb(). It affects the following archs: - x86, alpha, mips, powerpc, parisc, arm, m68k: simple remap of port -> base+reg - sparc32: use of reg only, since the base address was already masked out and the FDC controller is known from a static struct. - sparc64: like x86 for PCI, like sparc32 for 82077 Some archs use inline functions and others macros. This was not unified in order to minimize the number of changes to review. For the same reason checkpatch still spews a few warnings about things that were already there before. The parisc still uses hard-coded register values and could be cleaned up by taking the register definitions. The sparc per-controller inb/outb functions could further be refined to explicitly take an FDC register instead of a port in argument but it was not needed yet and may be cleaned later. Link: https://lore.kernel.org/r/20200331094054.24441-2-w@1wt.eu Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Ian Molton <spyro@f2s.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: x86@kernel.org Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Denis Efremov <efremov@linux.com>
393 lines
9.7 KiB
C
393 lines
9.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/* asm/floppy.h: Sparc specific parts of the Floppy driver.
|
|
*
|
|
* Copyright (C) 1995 David S. Miller (davem@davemloft.net)
|
|
*/
|
|
|
|
#ifndef __ASM_SPARC_FLOPPY_H
|
|
#define __ASM_SPARC_FLOPPY_H
|
|
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
|
|
#include <asm/pgtable.h>
|
|
#include <asm/idprom.h>
|
|
#include <asm/oplib.h>
|
|
#include <asm/auxio.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/page.h>
|
|
#include <asm/irq.h>
|
|
|
|
/* We don't need no stinkin' I/O port allocation crap. */
|
|
#undef release_region
|
|
#undef request_region
|
|
#define release_region(X, Y) do { } while(0)
|
|
#define request_region(X, Y, Z) (1)
|
|
|
|
/* References:
|
|
* 1) Netbsd Sun floppy driver.
|
|
* 2) NCR 82077 controller manual
|
|
* 3) Intel 82077 controller manual
|
|
*/
|
|
struct sun_flpy_controller {
|
|
volatile unsigned char status_82072; /* Main Status reg. */
|
|
#define dcr_82072 status_82072 /* Digital Control reg. */
|
|
#define status1_82077 status_82072 /* Auxiliary Status reg. 1 */
|
|
|
|
volatile unsigned char data_82072; /* Data fifo. */
|
|
#define status2_82077 data_82072 /* Auxiliary Status reg. 2 */
|
|
|
|
volatile unsigned char dor_82077; /* Digital Output reg. */
|
|
volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
|
|
|
|
volatile unsigned char status_82077; /* Main Status Register. */
|
|
#define drs_82077 status_82077 /* Digital Rate Select reg. */
|
|
|
|
volatile unsigned char data_82077; /* Data fifo. */
|
|
volatile unsigned char ___unused;
|
|
volatile unsigned char dir_82077; /* Digital Input reg. */
|
|
#define dcr_82077 dir_82077 /* Config Control reg. */
|
|
};
|
|
|
|
/* You'll only ever find one controller on a SparcStation anyways. */
|
|
static struct sun_flpy_controller *sun_fdc = NULL;
|
|
|
|
struct sun_floppy_ops {
|
|
unsigned char (*fd_inb)(int port);
|
|
void (*fd_outb)(unsigned char value, int port);
|
|
};
|
|
|
|
static struct sun_floppy_ops sun_fdops;
|
|
|
|
#define fd_inb(base, reg) sun_fdops.fd_inb(reg)
|
|
#define fd_outb(value, base, reg) sun_fdops.fd_outb(value, reg)
|
|
#define fd_enable_dma() sun_fd_enable_dma()
|
|
#define fd_disable_dma() sun_fd_disable_dma()
|
|
#define fd_request_dma() (0) /* nothing... */
|
|
#define fd_free_dma() /* nothing... */
|
|
#define fd_clear_dma_ff() /* nothing... */
|
|
#define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode)
|
|
#define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr)
|
|
#define fd_set_dma_count(count) sun_fd_set_dma_count(count)
|
|
#define fd_enable_irq() /* nothing... */
|
|
#define fd_disable_irq() /* nothing... */
|
|
#define fd_request_irq() sun_fd_request_irq()
|
|
#define fd_free_irq() /* nothing... */
|
|
#if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
|
|
#define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size))
|
|
#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
|
|
#endif
|
|
|
|
/* XXX This isn't really correct. XXX */
|
|
#define get_dma_residue(x) (0)
|
|
|
|
#define FLOPPY0_TYPE 4
|
|
#define FLOPPY1_TYPE 0
|
|
|
|
/* Super paranoid... */
|
|
#undef HAVE_DISABLE_HLT
|
|
|
|
/* Here is where we catch the floppy driver trying to initialize,
|
|
* therefore this is where we call the PROM device tree probing
|
|
* routine etc. on the Sparc.
|
|
*/
|
|
#define FDC1 sun_floppy_init()
|
|
|
|
#define N_FDC 1
|
|
#define N_DRIVE 8
|
|
|
|
/* No 64k boundary crossing problems on the Sparc. */
|
|
#define CROSS_64KB(a,s) (0)
|
|
|
|
/* Routines unique to each controller type on a Sun. */
|
|
static void sun_set_dor(unsigned char value, int fdc_82077)
|
|
{
|
|
if (fdc_82077)
|
|
sun_fdc->dor_82077 = value;
|
|
}
|
|
|
|
static unsigned char sun_read_dir(void)
|
|
{
|
|
return sun_fdc->dir_82077;
|
|
}
|
|
|
|
static unsigned char sun_82072_fd_inb(int port)
|
|
{
|
|
udelay(5);
|
|
switch(port & 7) {
|
|
default:
|
|
printk("floppy: Asked to read unknown port %d\n", port);
|
|
panic("floppy: Port bolixed.");
|
|
case 4: /* FD_STATUS */
|
|
return sun_fdc->status_82072 & ~STATUS_DMA;
|
|
case 5: /* FD_DATA */
|
|
return sun_fdc->data_82072;
|
|
case 7: /* FD_DIR */
|
|
return sun_read_dir();
|
|
}
|
|
panic("sun_82072_fd_inb: How did I get here?");
|
|
}
|
|
|
|
static void sun_82072_fd_outb(unsigned char value, int port)
|
|
{
|
|
udelay(5);
|
|
switch(port & 7) {
|
|
default:
|
|
printk("floppy: Asked to write to unknown port %d\n", port);
|
|
panic("floppy: Port bolixed.");
|
|
case 2: /* FD_DOR */
|
|
sun_set_dor(value, 0);
|
|
break;
|
|
case 5: /* FD_DATA */
|
|
sun_fdc->data_82072 = value;
|
|
break;
|
|
case 7: /* FD_DCR */
|
|
sun_fdc->dcr_82072 = value;
|
|
break;
|
|
case 4: /* FD_STATUS */
|
|
sun_fdc->status_82072 = value;
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
static unsigned char sun_82077_fd_inb(int port)
|
|
{
|
|
udelay(5);
|
|
switch(port & 7) {
|
|
default:
|
|
printk("floppy: Asked to read unknown port %d\n", port);
|
|
panic("floppy: Port bolixed.");
|
|
case 0: /* FD_STATUS_0 */
|
|
return sun_fdc->status1_82077;
|
|
case 1: /* FD_STATUS_1 */
|
|
return sun_fdc->status2_82077;
|
|
case 2: /* FD_DOR */
|
|
return sun_fdc->dor_82077;
|
|
case 3: /* FD_TDR */
|
|
return sun_fdc->tapectl_82077;
|
|
case 4: /* FD_STATUS */
|
|
return sun_fdc->status_82077 & ~STATUS_DMA;
|
|
case 5: /* FD_DATA */
|
|
return sun_fdc->data_82077;
|
|
case 7: /* FD_DIR */
|
|
return sun_read_dir();
|
|
}
|
|
panic("sun_82077_fd_inb: How did I get here?");
|
|
}
|
|
|
|
static void sun_82077_fd_outb(unsigned char value, int port)
|
|
{
|
|
udelay(5);
|
|
switch(port & 7) {
|
|
default:
|
|
printk("floppy: Asked to write to unknown port %d\n", port);
|
|
panic("floppy: Port bolixed.");
|
|
case 2: /* FD_DOR */
|
|
sun_set_dor(value, 1);
|
|
break;
|
|
case 5: /* FD_DATA */
|
|
sun_fdc->data_82077 = value;
|
|
break;
|
|
case 7: /* FD_DCR */
|
|
sun_fdc->dcr_82077 = value;
|
|
break;
|
|
case 4: /* FD_STATUS */
|
|
sun_fdc->status_82077 = value;
|
|
break;
|
|
case 3: /* FD_TDR */
|
|
sun_fdc->tapectl_82077 = value;
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* For pseudo-dma (Sun floppy drives have no real DMA available to
|
|
* them so we must eat the data fifo bytes directly ourselves) we have
|
|
* three state variables. doing_pdma tells our inline low-level
|
|
* assembly floppy interrupt entry point whether it should sit and eat
|
|
* bytes from the fifo or just transfer control up to the higher level
|
|
* floppy interrupt c-code. I tried very hard but I could not get the
|
|
* pseudo-dma to work in c-code without getting many overruns and
|
|
* underruns. If non-zero, doing_pdma encodes the direction of
|
|
* the transfer for debugging. 1=read 2=write
|
|
*/
|
|
|
|
/* Common routines to all controller types on the Sparc. */
|
|
static inline void virtual_dma_init(void)
|
|
{
|
|
/* nothing... */
|
|
}
|
|
|
|
static inline void sun_fd_disable_dma(void)
|
|
{
|
|
doing_pdma = 0;
|
|
pdma_base = NULL;
|
|
}
|
|
|
|
static inline void sun_fd_set_dma_mode(int mode)
|
|
{
|
|
switch(mode) {
|
|
case DMA_MODE_READ:
|
|
doing_pdma = 1;
|
|
break;
|
|
case DMA_MODE_WRITE:
|
|
doing_pdma = 2;
|
|
break;
|
|
default:
|
|
printk("Unknown dma mode %d\n", mode);
|
|
panic("floppy: Giving up...");
|
|
}
|
|
}
|
|
|
|
static inline void sun_fd_set_dma_addr(char *buffer)
|
|
{
|
|
pdma_vaddr = buffer;
|
|
}
|
|
|
|
static inline void sun_fd_set_dma_count(int length)
|
|
{
|
|
pdma_size = length;
|
|
}
|
|
|
|
static inline void sun_fd_enable_dma(void)
|
|
{
|
|
pdma_base = pdma_vaddr;
|
|
pdma_areasize = pdma_size;
|
|
}
|
|
|
|
int sparc_floppy_request_irq(unsigned int irq, irq_handler_t irq_handler);
|
|
|
|
static int sun_fd_request_irq(void)
|
|
{
|
|
static int once = 0;
|
|
|
|
if (!once) {
|
|
once = 1;
|
|
return sparc_floppy_request_irq(FLOPPY_IRQ, floppy_interrupt);
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static struct linux_prom_registers fd_regs[2];
|
|
|
|
static int sun_floppy_init(void)
|
|
{
|
|
struct platform_device *op;
|
|
struct device_node *dp;
|
|
struct resource r;
|
|
char state[128];
|
|
phandle fd_node;
|
|
phandle tnode;
|
|
int num_regs;
|
|
|
|
use_virtual_dma = 1;
|
|
|
|
/* Forget it if we aren't on a machine that could possibly
|
|
* ever have a floppy drive.
|
|
*/
|
|
if (sparc_cpu_model != sun4m) {
|
|
/* We certainly don't have a floppy controller. */
|
|
goto no_sun_fdc;
|
|
}
|
|
/* Well, try to find one. */
|
|
tnode = prom_getchild(prom_root_node);
|
|
fd_node = prom_searchsiblings(tnode, "obio");
|
|
if (fd_node != 0) {
|
|
tnode = prom_getchild(fd_node);
|
|
fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
|
|
} else {
|
|
fd_node = prom_searchsiblings(tnode, "fd");
|
|
}
|
|
if (fd_node == 0) {
|
|
goto no_sun_fdc;
|
|
}
|
|
|
|
/* The sun4m lets us know if the controller is actually usable. */
|
|
if (prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
|
|
if(!strcmp(state, "disabled")) {
|
|
goto no_sun_fdc;
|
|
}
|
|
}
|
|
num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
|
|
num_regs = (num_regs / sizeof(fd_regs[0]));
|
|
prom_apply_obio_ranges(fd_regs, num_regs);
|
|
memset(&r, 0, sizeof(r));
|
|
r.flags = fd_regs[0].which_io;
|
|
r.start = fd_regs[0].phys_addr;
|
|
sun_fdc = of_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
|
|
|
|
/* Look up irq in platform_device.
|
|
* We try "SUNW,fdtwo" and "fd"
|
|
*/
|
|
op = NULL;
|
|
for_each_node_by_name(dp, "SUNW,fdtwo") {
|
|
op = of_find_device_by_node(dp);
|
|
if (op)
|
|
break;
|
|
}
|
|
if (!op) {
|
|
for_each_node_by_name(dp, "fd") {
|
|
op = of_find_device_by_node(dp);
|
|
if (op)
|
|
break;
|
|
}
|
|
}
|
|
if (!op)
|
|
goto no_sun_fdc;
|
|
|
|
FLOPPY_IRQ = op->archdata.irqs[0];
|
|
|
|
/* Last minute sanity check... */
|
|
if (sun_fdc->status_82072 == 0xff) {
|
|
sun_fdc = NULL;
|
|
goto no_sun_fdc;
|
|
}
|
|
|
|
sun_fdops.fd_inb = sun_82077_fd_inb;
|
|
sun_fdops.fd_outb = sun_82077_fd_outb;
|
|
fdc_status = &sun_fdc->status_82077;
|
|
|
|
if (sun_fdc->dor_82077 == 0x80) {
|
|
sun_fdc->dor_82077 = 0x02;
|
|
if (sun_fdc->dor_82077 == 0x80) {
|
|
sun_fdops.fd_inb = sun_82072_fd_inb;
|
|
sun_fdops.fd_outb = sun_82072_fd_outb;
|
|
fdc_status = &sun_fdc->status_82072;
|
|
}
|
|
}
|
|
|
|
/* Success... */
|
|
allowed_drive_mask = 0x01;
|
|
return (int) sun_fdc;
|
|
|
|
no_sun_fdc:
|
|
return -1;
|
|
}
|
|
|
|
static int sparc_eject(void)
|
|
{
|
|
set_dor(0x00, 0xff, 0x90);
|
|
udelay(500);
|
|
set_dor(0x00, 0x6f, 0x00);
|
|
udelay(500);
|
|
return 0;
|
|
}
|
|
|
|
#define fd_eject(drive) sparc_eject()
|
|
|
|
#define EXTRA_FLOPPY_PARAMS
|
|
|
|
static DEFINE_SPINLOCK(dma_spin_lock);
|
|
|
|
#define claim_dma_lock() \
|
|
({ unsigned long flags; \
|
|
spin_lock_irqsave(&dma_spin_lock, flags); \
|
|
flags; \
|
|
})
|
|
|
|
#define release_dma_lock(__flags) \
|
|
spin_unlock_irqrestore(&dma_spin_lock, __flags);
|
|
|
|
#endif /* !(__ASM_SPARC_FLOPPY_H) */
|