linux/tools/testing/selftests/kvm/dirty_log_test.c
Gavin Shan dc6df7d4d0 KVM: selftests: Automate choosing dirty ring size in dirty_log_test
In the dirty ring case, we rely on vcpu exit due to full dirty ring
state. On ARM64 system, there are 4096 host pages when the host
page size is 64KB. In this case, the vcpu never exits due to the
full dirty ring state. The similar case is 4KB page size on host
and 64KB page size on guest. The vcpu corrupts same set of host
pages, but the dirty page information isn't collected in the main
thread. This leads to infinite loop as the following log shows.

  # ./dirty_log_test -M dirty-ring -c 65536 -m 5
  Setting log mode to: 'dirty-ring'
  Test iterations: 32, interval: 10 (ms)
  Testing guest mode: PA-bits:40,  VA-bits:48,  4K pages
  guest physical test memory offset: 0xffbffe0000
  vcpu stops because vcpu is kicked out...
  Notifying vcpu to continue
  vcpu continues now.
  Iteration 1 collected 576 pages
  <No more output afterwards>

Fix the issue by automatically choosing the best dirty ring size,
to ensure vcpu exit due to full dirty ring state. The option '-c'
becomes a hint to the dirty ring count, instead of the value of it.

Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110104914.31280-8-gshan@redhat.com
2022-11-10 13:11:58 +00:00

952 lines
27 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* KVM dirty page logging test
*
* Copyright (C) 2018, Red Hat, Inc.
*/
#define _GNU_SOURCE /* for program_invocation_name */
#include <stdio.h>
#include <stdlib.h>
#include <pthread.h>
#include <semaphore.h>
#include <sys/types.h>
#include <signal.h>
#include <errno.h>
#include <linux/bitmap.h>
#include <linux/bitops.h>
#include <linux/atomic.h>
#include <asm/barrier.h>
#include "kvm_util.h"
#include "test_util.h"
#include "guest_modes.h"
#include "processor.h"
#define DIRTY_MEM_BITS 30 /* 1G */
#define PAGE_SHIFT_4K 12
/* The memory slot index to track dirty pages */
#define TEST_MEM_SLOT_INDEX 1
/* Default guest test virtual memory offset */
#define DEFAULT_GUEST_TEST_MEM 0xc0000000
/* How many pages to dirty for each guest loop */
#define TEST_PAGES_PER_LOOP 1024
/* How many host loops to run (one KVM_GET_DIRTY_LOG for each loop) */
#define TEST_HOST_LOOP_N 32UL
/* Interval for each host loop (ms) */
#define TEST_HOST_LOOP_INTERVAL 10UL
/* Dirty bitmaps are always little endian, so we need to swap on big endian */
#if defined(__s390x__)
# define BITOP_LE_SWIZZLE ((BITS_PER_LONG-1) & ~0x7)
# define test_bit_le(nr, addr) \
test_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
# define set_bit_le(nr, addr) \
set_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
# define clear_bit_le(nr, addr) \
clear_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
# define test_and_set_bit_le(nr, addr) \
test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
# define test_and_clear_bit_le(nr, addr) \
test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, addr)
#else
# define test_bit_le test_bit
# define set_bit_le set_bit
# define clear_bit_le clear_bit
# define test_and_set_bit_le test_and_set_bit
# define test_and_clear_bit_le test_and_clear_bit
#endif
#define TEST_DIRTY_RING_COUNT 65536
#define SIG_IPI SIGUSR1
/*
* Guest/Host shared variables. Ensure addr_gva2hva() and/or
* sync_global_to/from_guest() are used when accessing from
* the host. READ/WRITE_ONCE() should also be used with anything
* that may change.
*/
static uint64_t host_page_size;
static uint64_t guest_page_size;
static uint64_t guest_num_pages;
static uint64_t random_array[TEST_PAGES_PER_LOOP];
static uint64_t iteration;
/*
* Guest physical memory offset of the testing memory slot.
* This will be set to the topmost valid physical address minus
* the test memory size.
*/
static uint64_t guest_test_phys_mem;
/*
* Guest virtual memory offset of the testing memory slot.
* Must not conflict with identity mapped test code.
*/
static uint64_t guest_test_virt_mem = DEFAULT_GUEST_TEST_MEM;
/*
* Continuously write to the first 8 bytes of a random pages within
* the testing memory region.
*/
static void guest_code(void)
{
uint64_t addr;
int i;
/*
* On s390x, all pages of a 1M segment are initially marked as dirty
* when a page of the segment is written to for the very first time.
* To compensate this specialty in this test, we need to touch all
* pages during the first iteration.
*/
for (i = 0; i < guest_num_pages; i++) {
addr = guest_test_virt_mem + i * guest_page_size;
*(uint64_t *)addr = READ_ONCE(iteration);
}
while (true) {
for (i = 0; i < TEST_PAGES_PER_LOOP; i++) {
addr = guest_test_virt_mem;
addr += (READ_ONCE(random_array[i]) % guest_num_pages)
* guest_page_size;
addr = align_down(addr, host_page_size);
*(uint64_t *)addr = READ_ONCE(iteration);
}
/* Tell the host that we need more random numbers */
GUEST_SYNC(1);
}
}
/* Host variables */
static bool host_quit;
/* Points to the test VM memory region on which we track dirty logs */
static void *host_test_mem;
static uint64_t host_num_pages;
/* For statistics only */
static uint64_t host_dirty_count;
static uint64_t host_clear_count;
static uint64_t host_track_next_count;
/* Whether dirty ring reset is requested, or finished */
static sem_t sem_vcpu_stop;
static sem_t sem_vcpu_cont;
/*
* This is only set by main thread, and only cleared by vcpu thread. It is
* used to request vcpu thread to stop at the next GUEST_SYNC, since GUEST_SYNC
* is the only place that we'll guarantee both "dirty bit" and "dirty data"
* will match. E.g., SIG_IPI won't guarantee that if the vcpu is interrupted
* after setting dirty bit but before the data is written.
*/
static atomic_t vcpu_sync_stop_requested;
/*
* This is updated by the vcpu thread to tell the host whether it's a
* ring-full event. It should only be read until a sem_wait() of
* sem_vcpu_stop and before vcpu continues to run.
*/
static bool dirty_ring_vcpu_ring_full;
/*
* This is only used for verifying the dirty pages. Dirty ring has a very
* tricky case when the ring just got full, kvm will do userspace exit due to
* ring full. When that happens, the very last PFN is set but actually the
* data is not changed (the guest WRITE is not really applied yet), because
* we found that the dirty ring is full, refused to continue the vcpu, and
* recorded the dirty gfn with the old contents.
*
* For this specific case, it's safe to skip checking this pfn for this
* bit, because it's a redundant bit, and when the write happens later the bit
* will be set again. We use this variable to always keep track of the latest
* dirty gfn we've collected, so that if a mismatch of data found later in the
* verifying process, we let it pass.
*/
static uint64_t dirty_ring_last_page;
enum log_mode_t {
/* Only use KVM_GET_DIRTY_LOG for logging */
LOG_MODE_DIRTY_LOG = 0,
/* Use both KVM_[GET|CLEAR]_DIRTY_LOG for logging */
LOG_MODE_CLEAR_LOG = 1,
/* Use dirty ring for logging */
LOG_MODE_DIRTY_RING = 2,
LOG_MODE_NUM,
/* Run all supported modes */
LOG_MODE_ALL = LOG_MODE_NUM,
};
/* Mode of logging to test. Default is to run all supported modes */
static enum log_mode_t host_log_mode_option = LOG_MODE_ALL;
/* Logging mode for current run */
static enum log_mode_t host_log_mode;
static pthread_t vcpu_thread;
static uint32_t test_dirty_ring_count = TEST_DIRTY_RING_COUNT;
static void vcpu_kick(void)
{
pthread_kill(vcpu_thread, SIG_IPI);
}
/*
* In our test we do signal tricks, let's use a better version of
* sem_wait to avoid signal interrupts
*/
static void sem_wait_until(sem_t *sem)
{
int ret;
do
ret = sem_wait(sem);
while (ret == -1 && errno == EINTR);
}
static bool clear_log_supported(void)
{
return kvm_has_cap(KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2);
}
static void clear_log_create_vm_done(struct kvm_vm *vm)
{
u64 manual_caps;
manual_caps = kvm_check_cap(KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2);
TEST_ASSERT(manual_caps, "MANUAL_CAPS is zero!");
manual_caps &= (KVM_DIRTY_LOG_MANUAL_PROTECT_ENABLE |
KVM_DIRTY_LOG_INITIALLY_SET);
vm_enable_cap(vm, KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2, manual_caps);
}
static void dirty_log_collect_dirty_pages(struct kvm_vcpu *vcpu, int slot,
void *bitmap, uint32_t num_pages,
uint32_t *unused)
{
kvm_vm_get_dirty_log(vcpu->vm, slot, bitmap);
}
static void clear_log_collect_dirty_pages(struct kvm_vcpu *vcpu, int slot,
void *bitmap, uint32_t num_pages,
uint32_t *unused)
{
kvm_vm_get_dirty_log(vcpu->vm, slot, bitmap);
kvm_vm_clear_dirty_log(vcpu->vm, slot, bitmap, 0, num_pages);
}
/* Should only be called after a GUEST_SYNC */
static void vcpu_handle_sync_stop(void)
{
if (atomic_read(&vcpu_sync_stop_requested)) {
/* It means main thread is sleeping waiting */
atomic_set(&vcpu_sync_stop_requested, false);
sem_post(&sem_vcpu_stop);
sem_wait_until(&sem_vcpu_cont);
}
}
static void default_after_vcpu_run(struct kvm_vcpu *vcpu, int ret, int err)
{
struct kvm_run *run = vcpu->run;
TEST_ASSERT(ret == 0 || (ret == -1 && err == EINTR),
"vcpu run failed: errno=%d", err);
TEST_ASSERT(get_ucall(vcpu, NULL) == UCALL_SYNC,
"Invalid guest sync status: exit_reason=%s\n",
exit_reason_str(run->exit_reason));
vcpu_handle_sync_stop();
}
static bool dirty_ring_supported(void)
{
return (kvm_has_cap(KVM_CAP_DIRTY_LOG_RING) ||
kvm_has_cap(KVM_CAP_DIRTY_LOG_RING_ACQ_REL));
}
static void dirty_ring_create_vm_done(struct kvm_vm *vm)
{
uint64_t pages;
uint32_t limit;
/*
* We rely on vcpu exit due to full dirty ring state. Adjust
* the ring buffer size to ensure we're able to reach the
* full dirty ring state.
*/
pages = (1ul << (DIRTY_MEM_BITS - vm->page_shift)) + 3;
pages = vm_adjust_num_guest_pages(vm->mode, pages);
if (vm->page_size < getpagesize())
pages = vm_num_host_pages(vm->mode, pages);
limit = 1 << (31 - __builtin_clz(pages));
test_dirty_ring_count = 1 << (31 - __builtin_clz(test_dirty_ring_count));
test_dirty_ring_count = min(limit, test_dirty_ring_count);
pr_info("dirty ring count: 0x%x\n", test_dirty_ring_count);
/*
* Switch to dirty ring mode after VM creation but before any
* of the vcpu creation.
*/
vm_enable_dirty_ring(vm, test_dirty_ring_count *
sizeof(struct kvm_dirty_gfn));
}
static inline bool dirty_gfn_is_dirtied(struct kvm_dirty_gfn *gfn)
{
return smp_load_acquire(&gfn->flags) == KVM_DIRTY_GFN_F_DIRTY;
}
static inline void dirty_gfn_set_collected(struct kvm_dirty_gfn *gfn)
{
smp_store_release(&gfn->flags, KVM_DIRTY_GFN_F_RESET);
}
static uint32_t dirty_ring_collect_one(struct kvm_dirty_gfn *dirty_gfns,
int slot, void *bitmap,
uint32_t num_pages, uint32_t *fetch_index)
{
struct kvm_dirty_gfn *cur;
uint32_t count = 0;
while (true) {
cur = &dirty_gfns[*fetch_index % test_dirty_ring_count];
if (!dirty_gfn_is_dirtied(cur))
break;
TEST_ASSERT(cur->slot == slot, "Slot number didn't match: "
"%u != %u", cur->slot, slot);
TEST_ASSERT(cur->offset < num_pages, "Offset overflow: "
"0x%llx >= 0x%x", cur->offset, num_pages);
//pr_info("fetch 0x%x page %llu\n", *fetch_index, cur->offset);
set_bit_le(cur->offset, bitmap);
dirty_ring_last_page = cur->offset;
dirty_gfn_set_collected(cur);
(*fetch_index)++;
count++;
}
return count;
}
static void dirty_ring_wait_vcpu(void)
{
/* This makes sure that hardware PML cache flushed */
vcpu_kick();
sem_wait_until(&sem_vcpu_stop);
}
static void dirty_ring_continue_vcpu(void)
{
pr_info("Notifying vcpu to continue\n");
sem_post(&sem_vcpu_cont);
}
static void dirty_ring_collect_dirty_pages(struct kvm_vcpu *vcpu, int slot,
void *bitmap, uint32_t num_pages,
uint32_t *ring_buf_idx)
{
uint32_t count = 0, cleared;
bool continued_vcpu = false;
dirty_ring_wait_vcpu();
if (!dirty_ring_vcpu_ring_full) {
/*
* This is not a ring-full event, it's safe to allow
* vcpu to continue
*/
dirty_ring_continue_vcpu();
continued_vcpu = true;
}
/* Only have one vcpu */
count = dirty_ring_collect_one(vcpu_map_dirty_ring(vcpu),
slot, bitmap, num_pages,
ring_buf_idx);
cleared = kvm_vm_reset_dirty_ring(vcpu->vm);
/* Cleared pages should be the same as collected */
TEST_ASSERT(cleared == count, "Reset dirty pages (%u) mismatch "
"with collected (%u)", cleared, count);
if (!continued_vcpu) {
TEST_ASSERT(dirty_ring_vcpu_ring_full,
"Didn't continue vcpu even without ring full");
dirty_ring_continue_vcpu();
}
pr_info("Iteration %ld collected %u pages\n", iteration, count);
}
static void dirty_ring_after_vcpu_run(struct kvm_vcpu *vcpu, int ret, int err)
{
struct kvm_run *run = vcpu->run;
/* A ucall-sync or ring-full event is allowed */
if (get_ucall(vcpu, NULL) == UCALL_SYNC) {
/* We should allow this to continue */
;
} else if (run->exit_reason == KVM_EXIT_DIRTY_RING_FULL ||
(ret == -1 && err == EINTR)) {
/* Update the flag first before pause */
WRITE_ONCE(dirty_ring_vcpu_ring_full,
run->exit_reason == KVM_EXIT_DIRTY_RING_FULL);
sem_post(&sem_vcpu_stop);
pr_info("vcpu stops because %s...\n",
dirty_ring_vcpu_ring_full ?
"dirty ring is full" : "vcpu is kicked out");
sem_wait_until(&sem_vcpu_cont);
pr_info("vcpu continues now.\n");
} else {
TEST_ASSERT(false, "Invalid guest sync status: "
"exit_reason=%s\n",
exit_reason_str(run->exit_reason));
}
}
static void dirty_ring_before_vcpu_join(void)
{
/* Kick another round of vcpu just to make sure it will quit */
sem_post(&sem_vcpu_cont);
}
struct log_mode {
const char *name;
/* Return true if this mode is supported, otherwise false */
bool (*supported)(void);
/* Hook when the vm creation is done (before vcpu creation) */
void (*create_vm_done)(struct kvm_vm *vm);
/* Hook to collect the dirty pages into the bitmap provided */
void (*collect_dirty_pages) (struct kvm_vcpu *vcpu, int slot,
void *bitmap, uint32_t num_pages,
uint32_t *ring_buf_idx);
/* Hook to call when after each vcpu run */
void (*after_vcpu_run)(struct kvm_vcpu *vcpu, int ret, int err);
void (*before_vcpu_join) (void);
} log_modes[LOG_MODE_NUM] = {
{
.name = "dirty-log",
.collect_dirty_pages = dirty_log_collect_dirty_pages,
.after_vcpu_run = default_after_vcpu_run,
},
{
.name = "clear-log",
.supported = clear_log_supported,
.create_vm_done = clear_log_create_vm_done,
.collect_dirty_pages = clear_log_collect_dirty_pages,
.after_vcpu_run = default_after_vcpu_run,
},
{
.name = "dirty-ring",
.supported = dirty_ring_supported,
.create_vm_done = dirty_ring_create_vm_done,
.collect_dirty_pages = dirty_ring_collect_dirty_pages,
.before_vcpu_join = dirty_ring_before_vcpu_join,
.after_vcpu_run = dirty_ring_after_vcpu_run,
},
};
/*
* We use this bitmap to track some pages that should have its dirty
* bit set in the _next_ iteration. For example, if we detected the
* page value changed to current iteration but at the same time the
* page bit is cleared in the latest bitmap, then the system must
* report that write in the next get dirty log call.
*/
static unsigned long *host_bmap_track;
static void log_modes_dump(void)
{
int i;
printf("all");
for (i = 0; i < LOG_MODE_NUM; i++)
printf(", %s", log_modes[i].name);
printf("\n");
}
static bool log_mode_supported(void)
{
struct log_mode *mode = &log_modes[host_log_mode];
if (mode->supported)
return mode->supported();
return true;
}
static void log_mode_create_vm_done(struct kvm_vm *vm)
{
struct log_mode *mode = &log_modes[host_log_mode];
if (mode->create_vm_done)
mode->create_vm_done(vm);
}
static void log_mode_collect_dirty_pages(struct kvm_vcpu *vcpu, int slot,
void *bitmap, uint32_t num_pages,
uint32_t *ring_buf_idx)
{
struct log_mode *mode = &log_modes[host_log_mode];
TEST_ASSERT(mode->collect_dirty_pages != NULL,
"collect_dirty_pages() is required for any log mode!");
mode->collect_dirty_pages(vcpu, slot, bitmap, num_pages, ring_buf_idx);
}
static void log_mode_after_vcpu_run(struct kvm_vcpu *vcpu, int ret, int err)
{
struct log_mode *mode = &log_modes[host_log_mode];
if (mode->after_vcpu_run)
mode->after_vcpu_run(vcpu, ret, err);
}
static void log_mode_before_vcpu_join(void)
{
struct log_mode *mode = &log_modes[host_log_mode];
if (mode->before_vcpu_join)
mode->before_vcpu_join();
}
static void generate_random_array(uint64_t *guest_array, uint64_t size)
{
uint64_t i;
for (i = 0; i < size; i++)
guest_array[i] = random();
}
static void *vcpu_worker(void *data)
{
int ret;
struct kvm_vcpu *vcpu = data;
struct kvm_vm *vm = vcpu->vm;
uint64_t *guest_array;
uint64_t pages_count = 0;
struct kvm_signal_mask *sigmask = alloca(offsetof(struct kvm_signal_mask, sigset)
+ sizeof(sigset_t));
sigset_t *sigset = (sigset_t *) &sigmask->sigset;
/*
* SIG_IPI is unblocked atomically while in KVM_RUN. It causes the
* ioctl to return with -EINTR, but it is still pending and we need
* to accept it with the sigwait.
*/
sigmask->len = 8;
pthread_sigmask(0, NULL, sigset);
sigdelset(sigset, SIG_IPI);
vcpu_ioctl(vcpu, KVM_SET_SIGNAL_MASK, sigmask);
sigemptyset(sigset);
sigaddset(sigset, SIG_IPI);
guest_array = addr_gva2hva(vm, (vm_vaddr_t)random_array);
while (!READ_ONCE(host_quit)) {
/* Clear any existing kick signals */
generate_random_array(guest_array, TEST_PAGES_PER_LOOP);
pages_count += TEST_PAGES_PER_LOOP;
/* Let the guest dirty the random pages */
ret = __vcpu_run(vcpu);
if (ret == -1 && errno == EINTR) {
int sig = -1;
sigwait(sigset, &sig);
assert(sig == SIG_IPI);
}
log_mode_after_vcpu_run(vcpu, ret, errno);
}
pr_info("Dirtied %"PRIu64" pages\n", pages_count);
return NULL;
}
static void vm_dirty_log_verify(enum vm_guest_mode mode, unsigned long *bmap)
{
uint64_t step = vm_num_host_pages(mode, 1);
uint64_t page;
uint64_t *value_ptr;
uint64_t min_iter = 0;
for (page = 0; page < host_num_pages; page += step) {
value_ptr = host_test_mem + page * host_page_size;
/* If this is a special page that we were tracking... */
if (test_and_clear_bit_le(page, host_bmap_track)) {
host_track_next_count++;
TEST_ASSERT(test_bit_le(page, bmap),
"Page %"PRIu64" should have its dirty bit "
"set in this iteration but it is missing",
page);
}
if (test_and_clear_bit_le(page, bmap)) {
bool matched;
host_dirty_count++;
/*
* If the bit is set, the value written onto
* the corresponding page should be either the
* previous iteration number or the current one.
*/
matched = (*value_ptr == iteration ||
*value_ptr == iteration - 1);
if (host_log_mode == LOG_MODE_DIRTY_RING && !matched) {
if (*value_ptr == iteration - 2 && min_iter <= iteration - 2) {
/*
* Short answer: this case is special
* only for dirty ring test where the
* page is the last page before a kvm
* dirty ring full in iteration N-2.
*
* Long answer: Assuming ring size R,
* one possible condition is:
*
* main thr vcpu thr
* -------- --------
* iter=1
* write 1 to page 0~(R-1)
* full, vmexit
* collect 0~(R-1)
* kick vcpu
* write 1 to (R-1)~(2R-2)
* full, vmexit
* iter=2
* collect (R-1)~(2R-2)
* kick vcpu
* write 1 to (2R-2)
* (NOTE!!! "1" cached in cpu reg)
* write 2 to (2R-1)~(3R-3)
* full, vmexit
* iter=3
* collect (2R-2)~(3R-3)
* (here if we read value on page
* "2R-2" is 1, while iter=3!!!)
*
* This however can only happen once per iteration.
*/
min_iter = iteration - 1;
continue;
} else if (page == dirty_ring_last_page) {
/*
* Please refer to comments in
* dirty_ring_last_page.
*/
continue;
}
}
TEST_ASSERT(matched,
"Set page %"PRIu64" value %"PRIu64
" incorrect (iteration=%"PRIu64")",
page, *value_ptr, iteration);
} else {
host_clear_count++;
/*
* If cleared, the value written can be any
* value smaller or equals to the iteration
* number. Note that the value can be exactly
* (iteration-1) if that write can happen
* like this:
*
* (1) increase loop count to "iteration-1"
* (2) write to page P happens (with value
* "iteration-1")
* (3) get dirty log for "iteration-1"; we'll
* see that page P bit is set (dirtied),
* and not set the bit in host_bmap_track
* (4) increase loop count to "iteration"
* (which is current iteration)
* (5) get dirty log for current iteration,
* we'll see that page P is cleared, with
* value "iteration-1".
*/
TEST_ASSERT(*value_ptr <= iteration,
"Clear page %"PRIu64" value %"PRIu64
" incorrect (iteration=%"PRIu64")",
page, *value_ptr, iteration);
if (*value_ptr == iteration) {
/*
* This page is _just_ modified; it
* should report its dirtyness in the
* next run
*/
set_bit_le(page, host_bmap_track);
}
}
}
}
static struct kvm_vm *create_vm(enum vm_guest_mode mode, struct kvm_vcpu **vcpu,
uint64_t extra_mem_pages, void *guest_code)
{
struct kvm_vm *vm;
pr_info("Testing guest mode: %s\n", vm_guest_mode_string(mode));
vm = __vm_create(mode, 1, extra_mem_pages);
log_mode_create_vm_done(vm);
*vcpu = vm_vcpu_add(vm, 0, guest_code);
return vm;
}
struct test_params {
unsigned long iterations;
unsigned long interval;
uint64_t phys_offset;
};
static void run_test(enum vm_guest_mode mode, void *arg)
{
struct test_params *p = arg;
struct kvm_vcpu *vcpu;
struct kvm_vm *vm;
unsigned long *bmap;
uint32_t ring_buf_idx = 0;
if (!log_mode_supported()) {
print_skip("Log mode '%s' not supported",
log_modes[host_log_mode].name);
return;
}
/*
* We reserve page table for 2 times of extra dirty mem which
* will definitely cover the original (1G+) test range. Here
* we do the calculation with 4K page size which is the
* smallest so the page number will be enough for all archs
* (e.g., 64K page size guest will need even less memory for
* page tables).
*/
vm = create_vm(mode, &vcpu,
2ul << (DIRTY_MEM_BITS - PAGE_SHIFT_4K), guest_code);
guest_page_size = vm->page_size;
/*
* A little more than 1G of guest page sized pages. Cover the
* case where the size is not aligned to 64 pages.
*/
guest_num_pages = (1ul << (DIRTY_MEM_BITS - vm->page_shift)) + 3;
guest_num_pages = vm_adjust_num_guest_pages(mode, guest_num_pages);
host_page_size = getpagesize();
host_num_pages = vm_num_host_pages(mode, guest_num_pages);
if (!p->phys_offset) {
guest_test_phys_mem = (vm->max_gfn - guest_num_pages) *
guest_page_size;
guest_test_phys_mem = align_down(guest_test_phys_mem, host_page_size);
} else {
guest_test_phys_mem = p->phys_offset;
}
#ifdef __s390x__
/* Align to 1M (segment size) */
guest_test_phys_mem = align_down(guest_test_phys_mem, 1 << 20);
#endif
pr_info("guest physical test memory offset: 0x%lx\n", guest_test_phys_mem);
bmap = bitmap_zalloc(host_num_pages);
host_bmap_track = bitmap_zalloc(host_num_pages);
/* Add an extra memory slot for testing dirty logging */
vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
guest_test_phys_mem,
TEST_MEM_SLOT_INDEX,
guest_num_pages,
KVM_MEM_LOG_DIRTY_PAGES);
/* Do mapping for the dirty track memory slot */
virt_map(vm, guest_test_virt_mem, guest_test_phys_mem, guest_num_pages);
/* Cache the HVA pointer of the region */
host_test_mem = addr_gpa2hva(vm, (vm_paddr_t)guest_test_phys_mem);
ucall_init(vm, NULL);
/* Export the shared variables to the guest */
sync_global_to_guest(vm, host_page_size);
sync_global_to_guest(vm, guest_page_size);
sync_global_to_guest(vm, guest_test_virt_mem);
sync_global_to_guest(vm, guest_num_pages);
/* Start the iterations */
iteration = 1;
sync_global_to_guest(vm, iteration);
host_quit = false;
host_dirty_count = 0;
host_clear_count = 0;
host_track_next_count = 0;
WRITE_ONCE(dirty_ring_vcpu_ring_full, false);
pthread_create(&vcpu_thread, NULL, vcpu_worker, vcpu);
while (iteration < p->iterations) {
/* Give the vcpu thread some time to dirty some pages */
usleep(p->interval * 1000);
log_mode_collect_dirty_pages(vcpu, TEST_MEM_SLOT_INDEX,
bmap, host_num_pages,
&ring_buf_idx);
/*
* See vcpu_sync_stop_requested definition for details on why
* we need to stop vcpu when verify data.
*/
atomic_set(&vcpu_sync_stop_requested, true);
sem_wait_until(&sem_vcpu_stop);
/*
* NOTE: for dirty ring, it's possible that we didn't stop at
* GUEST_SYNC but instead we stopped because ring is full;
* that's okay too because ring full means we're only missing
* the flush of the last page, and since we handle the last
* page specially verification will succeed anyway.
*/
assert(host_log_mode == LOG_MODE_DIRTY_RING ||
atomic_read(&vcpu_sync_stop_requested) == false);
vm_dirty_log_verify(mode, bmap);
sem_post(&sem_vcpu_cont);
iteration++;
sync_global_to_guest(vm, iteration);
}
/* Tell the vcpu thread to quit */
host_quit = true;
log_mode_before_vcpu_join();
pthread_join(vcpu_thread, NULL);
pr_info("Total bits checked: dirty (%"PRIu64"), clear (%"PRIu64"), "
"track_next (%"PRIu64")\n", host_dirty_count, host_clear_count,
host_track_next_count);
free(bmap);
free(host_bmap_track);
ucall_uninit(vm);
kvm_vm_free(vm);
}
static void help(char *name)
{
puts("");
printf("usage: %s [-h] [-i iterations] [-I interval] "
"[-p offset] [-m mode]\n", name);
puts("");
printf(" -c: hint to dirty ring size, in number of entries\n");
printf(" (only useful for dirty-ring test; default: %"PRIu32")\n",
TEST_DIRTY_RING_COUNT);
printf(" -i: specify iteration counts (default: %"PRIu64")\n",
TEST_HOST_LOOP_N);
printf(" -I: specify interval in ms (default: %"PRIu64" ms)\n",
TEST_HOST_LOOP_INTERVAL);
printf(" -p: specify guest physical test memory offset\n"
" Warning: a low offset can conflict with the loaded test code.\n");
printf(" -M: specify the host logging mode "
"(default: run all log modes). Supported modes: \n\t");
log_modes_dump();
guest_modes_help();
puts("");
exit(0);
}
int main(int argc, char *argv[])
{
struct test_params p = {
.iterations = TEST_HOST_LOOP_N,
.interval = TEST_HOST_LOOP_INTERVAL,
};
int opt, i;
sigset_t sigset;
sem_init(&sem_vcpu_stop, 0, 0);
sem_init(&sem_vcpu_cont, 0, 0);
guest_modes_append_default();
while ((opt = getopt(argc, argv, "c:hi:I:p:m:M:")) != -1) {
switch (opt) {
case 'c':
test_dirty_ring_count = strtol(optarg, NULL, 10);
break;
case 'i':
p.iterations = strtol(optarg, NULL, 10);
break;
case 'I':
p.interval = strtol(optarg, NULL, 10);
break;
case 'p':
p.phys_offset = strtoull(optarg, NULL, 0);
break;
case 'm':
guest_modes_cmdline(optarg);
break;
case 'M':
if (!strcmp(optarg, "all")) {
host_log_mode_option = LOG_MODE_ALL;
break;
}
for (i = 0; i < LOG_MODE_NUM; i++) {
if (!strcmp(optarg, log_modes[i].name)) {
pr_info("Setting log mode to: '%s'\n",
optarg);
host_log_mode_option = i;
break;
}
}
if (i == LOG_MODE_NUM) {
printf("Log mode '%s' invalid. Please choose "
"from: ", optarg);
log_modes_dump();
exit(1);
}
break;
case 'h':
default:
help(argv[0]);
break;
}
}
TEST_ASSERT(p.iterations > 2, "Iterations must be greater than two");
TEST_ASSERT(p.interval > 0, "Interval must be greater than zero");
pr_info("Test iterations: %"PRIu64", interval: %"PRIu64" (ms)\n",
p.iterations, p.interval);
srandom(time(0));
/* Ensure that vCPU threads start with SIG_IPI blocked. */
sigemptyset(&sigset);
sigaddset(&sigset, SIG_IPI);
pthread_sigmask(SIG_BLOCK, &sigset, NULL);
if (host_log_mode_option == LOG_MODE_ALL) {
/* Run each log mode */
for (i = 0; i < LOG_MODE_NUM; i++) {
pr_info("Testing Log Mode '%s'\n", log_modes[i].name);
host_log_mode = i;
for_each_guest_mode(run_test, &p);
}
} else {
host_log_mode = host_log_mode_option;
for_each_guest_mode(run_test, &p);
}
return 0;
}