Antoine Tenart d9c6de35e0 net: phy: mscc-miim: improve waiting logic ... The MSCC MIIM MDIO driver uses a waiting logic to wait for the MDIO bus to be ready to accept next commands. It does so by polling the BUSY status bit which indicates the MDIO bus has completed all pending operations. This can take time, and the controller supports writing the next command as soon as there are no pending commands (which happens while the MDIO bus is busy completing its current command). This patch implements this improved logic by adding an helper to poll the PENDING status bit, and by adjusting where we should wait for the bus to not be busy or to not be pending. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2020-05-26 15:33:56 -07:00
..
mscc	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net	2020-05-24 13:47:27 -07:00
adin.c
amd.c
aquantia.h
aquantia_hwmon.c
aquantia_main.c	net: phy: aquantia: use phy_read_mmd_poll_timeout() to simplify the code	2020-03-23 22:00:02 -07:00
at803x.c	net: phy: at803x: fix PHY ID masks	2020-05-23 16:25:28 -07:00
ax88796b.c
bcm-cygnus.c
bcm-phy-lib.c	net: phy: broadcom: add cable test support	2020-05-13 12:52:38 -07:00
bcm-phy-lib.h	net: phy: broadcom: add cable test support	2020-05-13 12:52:38 -07:00
bcm7xxx.c	net: phy: bcm7xx: add jumbo frame configuration to PHY	2020-03-27 16:07:24 -07:00
bcm63xx.c	net: phy: bcm63xx: fix OOPS due to missing driver name	2020-03-03 17:37:06 -08:00
bcm87xx.c	net: mdiobus: add clause 45 mdiobus accessors	2020-05-26 15:31:45 -07:00
bcm54140.c	net: phy: bcm54140: add cable diagnostics support	2020-05-13 12:52:39 -07:00
bcm84881.c	net: phy: bcm84881: clear settings on link down	2020-04-23 15:55:35 -07:00
broadcom.c	net: phy: broadcom: fix checkpatch complains about tabs	2020-05-16 13:38:33 -07:00
cicada.c
cortina.c	net: mdiobus: add clause 45 mdiobus accessors	2020-05-26 15:31:45 -07:00
davicom.c
dp83tc811.c	net: phy: DP83TC811: Fix WoL in config init to be disabled	2020-05-01 15:23:44 -07:00
dp83640.c	dp83640: reverse arguments to list_add_tail	2020-04-30 17:48:26 -07:00
dp83640_reg.h
dp83822.c	net: phy: DP83822: Fix WoL in config init to be disabled	2020-05-01 15:23:44 -07:00
dp83848.c
dp83867.c	net: phy: dp83867: Remove unneeded semicolon	2020-04-25 20:35:41 -07:00
dp83869.c	net: phy: dp83869: Set opmode from straps	2020-05-22 16:13:10 -07:00
et1011c.c
fixed_phy.c
icplus.c
intel-xway.c
Kconfig	net: phy: mdio: add IPQ4019 MDIO driver	2020-04-30 12:11:14 -07:00
linkmode.c	net: add linkmode helper for setting flow control advertisement	2020-02-16 19:39:44 -08:00
lxt.c
Makefile	net: phy: mdio: add IPQ4019 MDIO driver	2020-04-30 12:11:14 -07:00
marvell.c	net: phy: marvell: Add cable test support	2020-05-10 12:28:41 -07:00
marvell10g.c	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net	2020-05-06 22:10:13 -07:00
mdio-aspeed.c
mdio-bcm-iproc.c	net: phy: Make iproc_mdio_resume static	2020-05-07 12:55:29 -07:00
mdio-bcm-unimac.c	net: phy: mdio-bcm-unimac: Fix clock handling	2020-03-24 16:45:32 -07:00
mdio-bitbang.c
mdio-boardinfo.c
mdio-boardinfo.h
mdio-cavium.c
mdio-cavium.h
mdio-gpio.c
mdio-hisi-femac.c
mdio-i2c.c
mdio-i2c.h
mdio-ipq4019.c	net: phy: mdio: add IPQ4019 MDIO driver	2020-04-30 12:11:14 -07:00
mdio-ipq8064.c	net: mdio: add ipq8064 mdio driver	2020-03-06 22:07:05 -08:00
mdio-moxart.c	net: phy: mdio-moxart: remove unneeded include	2020-05-14 17:58:46 -07:00
mdio-mscc-miim.c	net: phy: mscc-miim: improve waiting logic	2020-05-26 15:33:56 -07:00
mdio-mux-bcm-iproc.c	Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net	2020-03-25 18:58:11 -07:00
mdio-mux-gpio.c
mdio-mux-meson-g12a.c
mdio-mux-mmioreg.c
mdio-mux-multiplexer.c
mdio-mux.c
mdio-mvusb.c	net: phy: add marvell usb to mdio controller	2020-03-26 19:49:34 -07:00
mdio-octeon.c
mdio-sun4i.c
mdio-thunder.c
mdio-xgene.c
mdio-xgene.h
mdio-xpcs.c	net: phy: xpcs: Restart AutoNeg if outcome was invalid	2020-03-23 21:01:58 -07:00
mdio_bus.c	net: phy: add concept of shared storage for PHYs	2020-05-06 14:53:29 -07:00
mdio_device.c
meson-gxl.c
micrel.c	net: phy: micrel: add phy-mode support for the KSZ9031 PHY	2020-04-22 19:38:46 -07:00
microchip.c
microchip_t1.c	net: phy: microchip_t1: add lan87xx_phy_init to initialize the lan87xx phy.	2020-04-22 11:38:58 -07:00
mii_timestamper.c
national.c
nxp-tja11xx.c	net: phy: tja11xx: add SQI support	2020-05-21 17:18:00 -07:00
phy-c45.c	net: phy: remove genphy_no_soft_reset	2020-04-24 16:47:51 -07:00
phy-core.c	net: mdiobus: add clause 45 mdiobus accessors	2020-05-26 15:31:45 -07:00
phy.c	net: mdiobus: add clause 45 mdiobus accessors	2020-05-26 15:31:45 -07:00
phy_device.c	net: mdiobus: add clause 45 mdiobus accessors	2020-05-26 15:31:45 -07:00
phy_led_triggers.c
phylink.c	net: mdiobus: add clause 45 mdiobus accessors	2020-05-26 15:31:45 -07:00
qsemi.c
realtek.c	net: phy: realtek: add delay to resume path of certain internal PHY's	2020-04-20 11:12:29 -07:00
rockchip.c
sfp-bus.c	net: phy: sfp-bus.c: get rid of docs warnings	2020-03-17 23:39:29 -07:00
sfp.c
sfp.h
smsc.c	net: phy: smsc: use phy_read_poll_timeout() to simplify the code	2020-03-23 22:00:02 -07:00
spi_ks8995.c
ste10Xp.c
swphy.c
swphy.h
teranetics.c	net: phy: remove genphy_no_soft_reset	2020-04-24 16:47:51 -07:00
uPD60620.c
vitesse.c
xilinx_gmii2rgmii.c