Felix Fietkau d6cb23b514 ath10k: stop abusing GFP_DMA ... Allocations from the DMA zone were originally added for legacy ISA stuff, or PCI devices that have specific limitations in their DMA addressing capabilities. It has no place in ath10k, which can do full 32-bit DMA. Fixes memory allocation errors on some platforms. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>		2015-11-30 16:54:45 +02:00
..
bmi.c
bmi.h	ath10k: select board data based on BMI chip id and board id	2015-10-14 08:58:35 +03:00
ce.c	ath10k: remove shadow copy of CE descriptors for source ring	2015-10-29 12:59:04 +02:00
ce.h	ath10k: remove shadow copy of CE descriptors for source ring	2015-10-29 12:59:04 +02:00
core.c	ath10k: fix board data fetch error message	2015-11-30 16:54:42 +02:00
core.h	ath10k: store msdu_id instead of txbuf pointers	2015-11-23 17:12:32 +02:00
debug.c	ath10k: debugfs file to enable Bluetooth coexistence feature	2015-11-04 19:37:32 +02:00
debug.h	ath10k: make fw stats prints specific to firmware version	2015-10-19 17:42:03 +03:00
debugfs_sta.c
hif.h	ath10k: remove htc polling for tx completion	2015-10-16 15:49:41 +03:00
htc.c	ath10k: remove htc polling for tx completion	2015-10-16 15:49:41 +03:00
htc.h	ath10k: remove htc polling for tx completion	2015-10-16 15:49:41 +03:00
htt.c	ath10k: enable raw encap mode and software crypto engine	2015-07-29 11:28:24 +03:00
htt.h	ath10k: remove txmode from skb_cb	2015-11-23 17:12:22 +02:00
htt_rx.c	ath10k: stop abusing GFP_DMA	2015-11-30 16:54:45 +02:00
htt_tx.c	ath10k: stop abusing GFP_DMA	2015-11-30 16:54:45 +02:00
hw.c	ath10k: add cycle/rx_clear counters frequency to hw_params	2015-08-17 16:46:21 +03:00
hw.h	ath10k: adjust the RX packet pad offset at QCA99X0 4addr mode	2015-11-23 17:12:18 +02:00
Kconfig
mac.c	ath10k: Enable AP + STA interface combination support for 10.x	2015-11-30 16:54:44 +02:00
mac.h	ath10k: fix the wrong RX rate idx report at 11G mode	2015-11-16 21:48:53 +02:00
Makefile	ath10k: Add support for code swap	2015-06-30 15:12:47 +03:00
p2p.c	ath10k: implement handling of p2p noa event	2015-03-07 09:57:42 +02:00
p2p.h	ath10k: implement handling of p2p noa event	2015-03-07 09:57:42 +02:00
pci.c	ath10k: add support for pktlog in QCA99X0	2015-11-04 19:36:41 +02:00
pci.h	ath10k: disable PCI PS for QCA988X and QCA99X0	2015-10-19 17:38:01 +03:00
rx_desc.h	ath10k: add support for qca99x0 Rx descriptors	2015-07-24 10:44:55 +03:00
spectral.c	ath10k: add spectral scan support for 10.4 fw	2015-08-26 11:09:12 +03:00
spectral.h	ath10k: refactor phyerr event handlers	2015-08-17 17:43:29 +03:00
swap.c	ath10k: Add support for code swap	2015-06-30 15:12:47 +03:00
swap.h	ath10k: Add support for code swap	2015-06-30 15:12:47 +03:00
targaddrs.h	ath10k: add QCA9377 chipset support	2015-10-29 13:02:33 +02:00
testmode.c	ath10k: add FW API support to test mode	2015-10-29 12:48:01 +02:00
testmode.h
testmode_i.h
thermal.c	ath10k: add thermal throttling support for 10.4 firmware	2015-11-04 19:31:46 +02:00
thermal.h	ath10k: configure thermal throttle while powering up	2015-03-23 17:16:37 +02:00
trace.c
trace.h	ath10k: add extra check for frame tracing	2015-04-17 09:33:48 +03:00
txrx.c	ath10k: fix tx header parsing	2015-11-23 17:12:29 +02:00
txrx.h
wmi-ops.h	ath10k: enable adaptive CCA	2015-10-28 21:33:03 +02:00
wmi-tlv.c	ath10k: add abstraction layer for peer flags	2015-11-04 19:30:08 +02:00
wmi-tlv.h	ath10k: add abstraction layer for peer flags	2015-11-04 19:30:08 +02:00
wmi.c	ath10k: replace vdev_id and tid in skb cb	2015-11-23 17:12:30 +02:00
wmi.h	ath10k: fix peer assoc complete WMI command for 10.4	2015-11-12 21:19:13 +02:00
wow.c	ath10k: fix hw reconfig on wow failure	2015-08-13 14:22:49 +03:00
wow.h	ath10k: add WOW patterns support	2015-03-30 09:10:24 +03:00