Michael Chan b4e30e8e7e bnxt_en: Improve multicast address setup logic. ... The driver builds a list of multicast addresses and sends it to the firmware when the driver's ndo_set_rx_mode() is called. In rare cases, the firmware can fail this call if internal resources to add multicast addresses are exhausted. In that case, we should try the call again by setting the ALL_MCAST flag which is more guaranteed to succeed. Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2019-04-27 17:00:18 -04:00
..
bnx2x	bnx2x: fix spelling mistake "dicline" -> "decline"	2019-04-15 17:23:09 -07:00
bnxt	bnxt_en: Improve multicast address setup logic.	2019-04-27 17:00:18 -04:00
genet	net: phy: fixed-phy: Drop GPIO from fixed_phy_add()	2019-02-04 18:33:36 -08:00
b44.c	net: b44: replace dev_kfree_skb_xxx by dev_consume_skb_xxx for drop profiles	2019-01-29 10:11:42 -08:00
b44.h
bcm63xx_enet.c	cross-tree: phase out dma_zalloc_coherent()	2019-01-08 07:58:37 -05:00
bcm63xx_enet.h
bcmsysport.c	net: systemport: Fix reception of BPDUs	2019-02-15 20:37:54 -08:00
bcmsysport.h	net: systemport: Fix WoL with password after deep sleep	2019-02-03 11:23:50 -08:00
bgmac-bcma-mdio.c
bgmac-bcma.c
bgmac-platform.c
bgmac.c	net: phy: fixed-phy: Drop GPIO from fixed_phy_add()	2019-02-04 18:33:36 -08:00
bgmac.h
bnx2.c	cross-tree: phase out dma_zalloc_coherent()	2019-01-08 07:58:37 -05:00
bnx2.h
bnx2_fw.h
cnic.c	cnic: remove use of VLAN_TAG_PRESENT	2018-11-08 19:49:31 -08:00
cnic.h
cnic_defs.h
cnic_if.h
Kconfig	net: devlink: turn devlink into a built-in	2019-02-26 08:49:05 -08:00
Makefile
sb1250-mac.c	net: broadcom: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profiles	2019-02-06 17:38:15 -08:00
tg3.c	broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant	2019-04-08 16:30:43 -07:00
tg3.h	broadcom: tg3: fix use of SPEED_UNKNOWN ethtool constant	2019-04-08 16:30:43 -07:00