Sasha Neftin 68fe1d5da5 e1000e: Add Support for 38.4MHZ frequency ... Add support for 38.4MHz frequency is required for PTP on CannonLake. SYSTIM frequency adjustment attributes for TIMINCA are get/set dependent on the hardware clock frequency for a different types of adapters. 38.4MHz frequency supported by CannonLake and active once time synchronisation mechanism was enabled Changed abbreviation from Hz to HZ to be compliant checkpatch code style Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Raanan Avargil <raanan.avargil@intel.com> Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2017-04-30 05:22:32 -07:00
..
80003es2lan.c	e1000e: use BIT() macro for bit defines	2016-05-13 15:15:36 -07:00
80003es2lan.h
82571.c	e1000e: factor out systim sanitization	2016-08-16 10:46:19 -07:00
82571.h
defines.h	e1000e: Adds hardware supported cross timestamp on e1000e nic	2016-03-03 14:28:46 -08:00
e1000.h	e1000e: Add Support for 38.4MHZ frequency	2017-04-30 05:22:32 -07:00
ethtool.c	e1000e: Add Support for CannonLake	2017-04-30 05:18:30 -07:00
hw.h	e1000e: Initial Support for CannonLake	2017-04-30 05:15:08 -07:00
ich8lan.c	e1000e: Add Support for CannonLake	2017-04-30 05:18:30 -07:00
ich8lan.h	e1000e: mark shifted values as unsigned	2016-05-13 15:19:05 -07:00
mac.c	e1000e: use BIT() macro for bit defines	2016-05-13 15:15:36 -07:00
mac.h
Makefile
manage.c
manage.h
netdev.c	e1000e: Add Support for 38.4MHZ frequency	2017-04-30 05:22:32 -07:00
nvm.c	e1000e: use BIT() macro for bit defines	2016-05-13 15:15:36 -07:00
nvm.h
param.c
phy.c	e1000e: use BIT() macro for bit defines	2016-05-13 15:15:36 -07:00
phy.h	e1000e: use BIT() macro for bit defines	2016-05-13 15:15:36 -07:00
ptp.c	e1000e: Add Support for CannonLake	2017-04-30 05:18:30 -07:00
regs.h	e1000e: Adds hardware supported cross timestamp on e1000e nic	2016-03-03 14:28:46 -08:00