mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00

In the function configure_geometry(), we will setup the ISI CFG2 according to the sensor output format. It make no sense to just read back the CFG2 register and just set part of it. So just set up this register directly makes things simpler. Currently only support YUV format from camera sensor. Signed-off-by: Josh Wu <josh.wu@atmel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
1083 lines
28 KiB
C
1083 lines
28 KiB
C
/*
|
|
* Copyright (c) 2011 Atmel Corporation
|
|
* Josh Wu, <josh.wu@atmel.com>
|
|
*
|
|
* Based on previous work by Lars Haring, <lars.haring@atmel.com>
|
|
* and Sedji Gaouaou
|
|
* Based on the bttv driver for Bt848 with respective copyright holders
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <media/atmel-isi.h>
|
|
#include <media/soc_camera.h>
|
|
#include <media/soc_mediabus.h>
|
|
#include <media/v4l2-of.h>
|
|
#include <media/videobuf2-dma-contig.h>
|
|
|
|
#define MAX_BUFFER_NUM 32
|
|
#define MAX_SUPPORT_WIDTH 2048
|
|
#define MAX_SUPPORT_HEIGHT 2048
|
|
#define VID_LIMIT_BYTES (16 * 1024 * 1024)
|
|
#define MIN_FRAME_RATE 15
|
|
#define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE)
|
|
|
|
/* Frame buffer descriptor */
|
|
struct fbd {
|
|
/* Physical address of the frame buffer */
|
|
u32 fb_address;
|
|
/* DMA Control Register(only in HISI2) */
|
|
u32 dma_ctrl;
|
|
/* Physical address of the next fbd */
|
|
u32 next_fbd_address;
|
|
};
|
|
|
|
static void set_dma_ctrl(struct fbd *fb_desc, u32 ctrl)
|
|
{
|
|
fb_desc->dma_ctrl = ctrl;
|
|
}
|
|
|
|
struct isi_dma_desc {
|
|
struct list_head list;
|
|
struct fbd *p_fbd;
|
|
dma_addr_t fbd_phys;
|
|
};
|
|
|
|
/* Frame buffer data */
|
|
struct frame_buffer {
|
|
struct vb2_buffer vb;
|
|
struct isi_dma_desc *p_dma_desc;
|
|
struct list_head list;
|
|
};
|
|
|
|
struct atmel_isi {
|
|
/* Protects the access of variables shared with the ISR */
|
|
spinlock_t lock;
|
|
void __iomem *regs;
|
|
|
|
int sequence;
|
|
|
|
struct vb2_alloc_ctx *alloc_ctx;
|
|
|
|
/* Allocate descriptors for dma buffer use */
|
|
struct fbd *p_fb_descriptors;
|
|
dma_addr_t fb_descriptors_phys;
|
|
struct list_head dma_desc_head;
|
|
struct isi_dma_desc dma_desc[MAX_BUFFER_NUM];
|
|
|
|
struct completion complete;
|
|
/* ISI peripherial clock */
|
|
struct clk *pclk;
|
|
unsigned int irq;
|
|
|
|
struct isi_platform_data pdata;
|
|
u16 width_flags; /* max 12 bits */
|
|
|
|
struct list_head video_buffer_list;
|
|
struct frame_buffer *active;
|
|
|
|
struct soc_camera_host soc_host;
|
|
};
|
|
|
|
static void isi_writel(struct atmel_isi *isi, u32 reg, u32 val)
|
|
{
|
|
writel(val, isi->regs + reg);
|
|
}
|
|
static u32 isi_readl(struct atmel_isi *isi, u32 reg)
|
|
{
|
|
return readl(isi->regs + reg);
|
|
}
|
|
|
|
static int configure_geometry(struct atmel_isi *isi, u32 width,
|
|
u32 height, u32 code)
|
|
{
|
|
u32 cfg2;
|
|
|
|
/* According to sensor's output format to set cfg2 */
|
|
switch (code) {
|
|
/* YUV, including grey */
|
|
case MEDIA_BUS_FMT_Y8_1X8:
|
|
cfg2 = ISI_CFG2_GRAYSCALE | ISI_CFG2_COL_SPACE_YCbCr;
|
|
break;
|
|
case MEDIA_BUS_FMT_VYUY8_2X8:
|
|
cfg2 = ISI_CFG2_YCC_SWAP_MODE_3 | ISI_CFG2_COL_SPACE_YCbCr;
|
|
break;
|
|
case MEDIA_BUS_FMT_UYVY8_2X8:
|
|
cfg2 = ISI_CFG2_YCC_SWAP_MODE_2 | ISI_CFG2_COL_SPACE_YCbCr;
|
|
break;
|
|
case MEDIA_BUS_FMT_YVYU8_2X8:
|
|
cfg2 = ISI_CFG2_YCC_SWAP_MODE_1 | ISI_CFG2_COL_SPACE_YCbCr;
|
|
break;
|
|
case MEDIA_BUS_FMT_YUYV8_2X8:
|
|
cfg2 = ISI_CFG2_YCC_SWAP_DEFAULT | ISI_CFG2_COL_SPACE_YCbCr;
|
|
break;
|
|
/* RGB, TODO */
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
|
|
/* Set width */
|
|
cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) &
|
|
ISI_CFG2_IM_HSIZE_MASK;
|
|
/* Set height */
|
|
cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET)
|
|
& ISI_CFG2_IM_VSIZE_MASK;
|
|
isi_writel(isi, ISI_CFG2, cfg2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi)
|
|
{
|
|
if (isi->active) {
|
|
struct vb2_buffer *vb = &isi->active->vb;
|
|
struct frame_buffer *buf = isi->active;
|
|
|
|
list_del_init(&buf->list);
|
|
v4l2_get_timestamp(&vb->v4l2_buf.timestamp);
|
|
vb->v4l2_buf.sequence = isi->sequence++;
|
|
vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
|
|
}
|
|
|
|
if (list_empty(&isi->video_buffer_list)) {
|
|
isi->active = NULL;
|
|
} else {
|
|
/* start next dma frame. */
|
|
isi->active = list_entry(isi->video_buffer_list.next,
|
|
struct frame_buffer, list);
|
|
isi_writel(isi, ISI_DMA_C_DSCR,
|
|
(u32)isi->active->p_dma_desc->fbd_phys);
|
|
isi_writel(isi, ISI_DMA_C_CTRL,
|
|
ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE);
|
|
isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* ISI interrupt service routine */
|
|
static irqreturn_t isi_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct atmel_isi *isi = dev_id;
|
|
u32 status, mask, pending;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
spin_lock(&isi->lock);
|
|
|
|
status = isi_readl(isi, ISI_STATUS);
|
|
mask = isi_readl(isi, ISI_INTMASK);
|
|
pending = status & mask;
|
|
|
|
if (pending & ISI_CTRL_SRST) {
|
|
complete(&isi->complete);
|
|
isi_writel(isi, ISI_INTDIS, ISI_CTRL_SRST);
|
|
ret = IRQ_HANDLED;
|
|
} else if (pending & ISI_CTRL_DIS) {
|
|
complete(&isi->complete);
|
|
isi_writel(isi, ISI_INTDIS, ISI_CTRL_DIS);
|
|
ret = IRQ_HANDLED;
|
|
} else {
|
|
if (likely(pending & ISI_SR_CXFR_DONE))
|
|
ret = atmel_isi_handle_streaming(isi);
|
|
}
|
|
|
|
spin_unlock(&isi->lock);
|
|
return ret;
|
|
}
|
|
|
|
#define WAIT_ISI_RESET 1
|
|
#define WAIT_ISI_DISABLE 0
|
|
static int atmel_isi_wait_status(struct atmel_isi *isi, int wait_reset)
|
|
{
|
|
unsigned long timeout;
|
|
/*
|
|
* The reset or disable will only succeed if we have a
|
|
* pixel clock from the camera.
|
|
*/
|
|
init_completion(&isi->complete);
|
|
|
|
if (wait_reset) {
|
|
isi_writel(isi, ISI_INTEN, ISI_CTRL_SRST);
|
|
isi_writel(isi, ISI_CTRL, ISI_CTRL_SRST);
|
|
} else {
|
|
isi_writel(isi, ISI_INTEN, ISI_CTRL_DIS);
|
|
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
|
|
}
|
|
|
|
timeout = wait_for_completion_timeout(&isi->complete,
|
|
msecs_to_jiffies(500));
|
|
if (timeout == 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------
|
|
Videobuf operations
|
|
------------------------------------------------------------------*/
|
|
static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
|
|
unsigned int *nbuffers, unsigned int *nplanes,
|
|
unsigned int sizes[], void *alloc_ctxs[])
|
|
{
|
|
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
unsigned long size;
|
|
|
|
size = icd->sizeimage;
|
|
|
|
if (!*nbuffers || *nbuffers > MAX_BUFFER_NUM)
|
|
*nbuffers = MAX_BUFFER_NUM;
|
|
|
|
if (size * *nbuffers > VID_LIMIT_BYTES)
|
|
*nbuffers = VID_LIMIT_BYTES / size;
|
|
|
|
*nplanes = 1;
|
|
sizes[0] = size;
|
|
alloc_ctxs[0] = isi->alloc_ctx;
|
|
|
|
isi->sequence = 0;
|
|
isi->active = NULL;
|
|
|
|
dev_dbg(icd->parent, "%s, count=%d, size=%ld\n", __func__,
|
|
*nbuffers, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int buffer_init(struct vb2_buffer *vb)
|
|
{
|
|
struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
|
|
|
|
buf->p_dma_desc = NULL;
|
|
INIT_LIST_HEAD(&buf->list);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int buffer_prepare(struct vb2_buffer *vb)
|
|
{
|
|
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
|
|
struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
unsigned long size;
|
|
struct isi_dma_desc *desc;
|
|
|
|
size = icd->sizeimage;
|
|
|
|
if (vb2_plane_size(vb, 0) < size) {
|
|
dev_err(icd->parent, "%s data will not fit into plane (%lu < %lu)\n",
|
|
__func__, vb2_plane_size(vb, 0), size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
vb2_set_plane_payload(&buf->vb, 0, size);
|
|
|
|
if (!buf->p_dma_desc) {
|
|
if (list_empty(&isi->dma_desc_head)) {
|
|
dev_err(icd->parent, "Not enough dma descriptors.\n");
|
|
return -EINVAL;
|
|
} else {
|
|
/* Get an available descriptor */
|
|
desc = list_entry(isi->dma_desc_head.next,
|
|
struct isi_dma_desc, list);
|
|
/* Delete the descriptor since now it is used */
|
|
list_del_init(&desc->list);
|
|
|
|
/* Initialize the dma descriptor */
|
|
desc->p_fbd->fb_address =
|
|
vb2_dma_contig_plane_dma_addr(vb, 0);
|
|
desc->p_fbd->next_fbd_address = 0;
|
|
set_dma_ctrl(desc->p_fbd, ISI_DMA_CTRL_WB);
|
|
|
|
buf->p_dma_desc = desc;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void buffer_cleanup(struct vb2_buffer *vb)
|
|
{
|
|
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
|
|
|
|
/* This descriptor is available now and we add to head list */
|
|
if (buf->p_dma_desc)
|
|
list_add(&buf->p_dma_desc->list, &isi->dma_desc_head);
|
|
}
|
|
|
|
static void start_dma(struct atmel_isi *isi, struct frame_buffer *buffer)
|
|
{
|
|
u32 ctrl, cfg1;
|
|
|
|
cfg1 = isi_readl(isi, ISI_CFG1);
|
|
/* Enable irq: cxfr for the codec path, pxfr for the preview path */
|
|
isi_writel(isi, ISI_INTEN,
|
|
ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE);
|
|
|
|
/* Check if already in a frame */
|
|
if (isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) {
|
|
dev_err(isi->soc_host.icd->parent, "Already in frame handling.\n");
|
|
return;
|
|
}
|
|
|
|
isi_writel(isi, ISI_DMA_C_DSCR, (u32)buffer->p_dma_desc->fbd_phys);
|
|
isi_writel(isi, ISI_DMA_C_CTRL, ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE);
|
|
isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH);
|
|
|
|
cfg1 &= ~ISI_CFG1_FRATE_DIV_MASK;
|
|
/* Enable linked list */
|
|
cfg1 |= isi->pdata.frate | ISI_CFG1_DISCR;
|
|
|
|
/* Enable codec path and ISI */
|
|
ctrl = ISI_CTRL_CDC | ISI_CTRL_EN;
|
|
isi_writel(isi, ISI_CTRL, ctrl);
|
|
isi_writel(isi, ISI_CFG1, cfg1);
|
|
}
|
|
|
|
static void buffer_queue(struct vb2_buffer *vb)
|
|
{
|
|
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb);
|
|
unsigned long flags = 0;
|
|
|
|
spin_lock_irqsave(&isi->lock, flags);
|
|
list_add_tail(&buf->list, &isi->video_buffer_list);
|
|
|
|
if (isi->active == NULL) {
|
|
isi->active = buf;
|
|
if (vb2_is_streaming(vb->vb2_queue))
|
|
start_dma(isi, buf);
|
|
}
|
|
spin_unlock_irqrestore(&isi->lock, flags);
|
|
}
|
|
|
|
static int start_streaming(struct vb2_queue *vq, unsigned int count)
|
|
{
|
|
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(ici->v4l2_dev.dev);
|
|
|
|
/* Reset ISI */
|
|
ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET);
|
|
if (ret < 0) {
|
|
dev_err(icd->parent, "Reset ISI timed out\n");
|
|
pm_runtime_put(ici->v4l2_dev.dev);
|
|
return ret;
|
|
}
|
|
/* Disable all interrupts */
|
|
isi_writel(isi, ISI_INTDIS, (u32)~0UL);
|
|
|
|
spin_lock_irq(&isi->lock);
|
|
/* Clear any pending interrupt */
|
|
isi_readl(isi, ISI_STATUS);
|
|
|
|
if (count)
|
|
start_dma(isi, isi->active);
|
|
spin_unlock_irq(&isi->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* abort streaming and wait for last buffer */
|
|
static void stop_streaming(struct vb2_queue *vq)
|
|
{
|
|
struct soc_camera_device *icd = soc_camera_from_vb2q(vq);
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
struct frame_buffer *buf, *node;
|
|
int ret = 0;
|
|
unsigned long timeout;
|
|
|
|
spin_lock_irq(&isi->lock);
|
|
isi->active = NULL;
|
|
/* Release all active buffers */
|
|
list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) {
|
|
list_del_init(&buf->list);
|
|
vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
|
|
}
|
|
spin_unlock_irq(&isi->lock);
|
|
|
|
timeout = jiffies + FRAME_INTERVAL_MILLI_SEC * HZ;
|
|
/* Wait until the end of the current frame. */
|
|
while ((isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) &&
|
|
time_before(jiffies, timeout))
|
|
msleep(1);
|
|
|
|
if (time_after(jiffies, timeout))
|
|
dev_err(icd->parent,
|
|
"Timeout waiting for finishing codec request\n");
|
|
|
|
/* Disable interrupts */
|
|
isi_writel(isi, ISI_INTDIS,
|
|
ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE);
|
|
|
|
/* Disable ISI and wait for it is done */
|
|
ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE);
|
|
if (ret < 0)
|
|
dev_err(icd->parent, "Disable ISI timed out\n");
|
|
|
|
pm_runtime_put(ici->v4l2_dev.dev);
|
|
}
|
|
|
|
static struct vb2_ops isi_video_qops = {
|
|
.queue_setup = queue_setup,
|
|
.buf_init = buffer_init,
|
|
.buf_prepare = buffer_prepare,
|
|
.buf_cleanup = buffer_cleanup,
|
|
.buf_queue = buffer_queue,
|
|
.start_streaming = start_streaming,
|
|
.stop_streaming = stop_streaming,
|
|
.wait_prepare = vb2_ops_wait_prepare,
|
|
.wait_finish = vb2_ops_wait_finish,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------
|
|
SOC camera operations for the device
|
|
------------------------------------------------------------------*/
|
|
static int isi_camera_init_videobuf(struct vb2_queue *q,
|
|
struct soc_camera_device *icd)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
|
|
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
q->io_modes = VB2_MMAP;
|
|
q->drv_priv = icd;
|
|
q->buf_struct_size = sizeof(struct frame_buffer);
|
|
q->ops = &isi_video_qops;
|
|
q->mem_ops = &vb2_dma_contig_memops;
|
|
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
|
|
q->lock = &ici->host_lock;
|
|
|
|
return vb2_queue_init(q);
|
|
}
|
|
|
|
static int isi_camera_set_fmt(struct soc_camera_device *icd,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
|
|
const struct soc_camera_format_xlate *xlate;
|
|
struct v4l2_pix_format *pix = &f->fmt.pix;
|
|
struct v4l2_subdev_format format = {
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
};
|
|
struct v4l2_mbus_framefmt *mf = &format.format;
|
|
int ret;
|
|
|
|
xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
|
|
if (!xlate) {
|
|
dev_warn(icd->parent, "Format %x not found\n",
|
|
pix->pixelformat);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(icd->parent, "Plan to set format %dx%d\n",
|
|
pix->width, pix->height);
|
|
|
|
mf->width = pix->width;
|
|
mf->height = pix->height;
|
|
mf->field = pix->field;
|
|
mf->colorspace = pix->colorspace;
|
|
mf->code = xlate->code;
|
|
|
|
ret = v4l2_subdev_call(sd, pad, set_fmt, NULL, &format);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (mf->code != xlate->code)
|
|
return -EINVAL;
|
|
|
|
/* Enable PM and peripheral clock before operate isi registers */
|
|
pm_runtime_get_sync(ici->v4l2_dev.dev);
|
|
|
|
ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
|
|
|
|
pm_runtime_put(ici->v4l2_dev.dev);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pix->width = mf->width;
|
|
pix->height = mf->height;
|
|
pix->field = mf->field;
|
|
pix->colorspace = mf->colorspace;
|
|
icd->current_fmt = xlate;
|
|
|
|
dev_dbg(icd->parent, "Finally set format %dx%d\n",
|
|
pix->width, pix->height);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int isi_camera_try_fmt(struct soc_camera_device *icd,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
|
|
const struct soc_camera_format_xlate *xlate;
|
|
struct v4l2_pix_format *pix = &f->fmt.pix;
|
|
struct v4l2_subdev_pad_config pad_cfg;
|
|
struct v4l2_subdev_format format = {
|
|
.which = V4L2_SUBDEV_FORMAT_TRY,
|
|
};
|
|
struct v4l2_mbus_framefmt *mf = &format.format;
|
|
u32 pixfmt = pix->pixelformat;
|
|
int ret;
|
|
|
|
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
|
|
if (pixfmt && !xlate) {
|
|
dev_warn(icd->parent, "Format %x not found\n", pixfmt);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* limit to Atmel ISI hardware capabilities */
|
|
if (pix->height > MAX_SUPPORT_HEIGHT)
|
|
pix->height = MAX_SUPPORT_HEIGHT;
|
|
if (pix->width > MAX_SUPPORT_WIDTH)
|
|
pix->width = MAX_SUPPORT_WIDTH;
|
|
|
|
/* limit to sensor capabilities */
|
|
mf->width = pix->width;
|
|
mf->height = pix->height;
|
|
mf->field = pix->field;
|
|
mf->colorspace = pix->colorspace;
|
|
mf->code = xlate->code;
|
|
|
|
ret = v4l2_subdev_call(sd, pad, set_fmt, &pad_cfg, &format);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pix->width = mf->width;
|
|
pix->height = mf->height;
|
|
pix->colorspace = mf->colorspace;
|
|
|
|
switch (mf->field) {
|
|
case V4L2_FIELD_ANY:
|
|
pix->field = V4L2_FIELD_NONE;
|
|
break;
|
|
case V4L2_FIELD_NONE:
|
|
break;
|
|
default:
|
|
dev_err(icd->parent, "Field type %d unsupported.\n",
|
|
mf->field);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct soc_mbus_pixelfmt isi_camera_formats[] = {
|
|
{
|
|
.fourcc = V4L2_PIX_FMT_YUYV,
|
|
.name = "Packed YUV422 16 bit",
|
|
.bits_per_sample = 8,
|
|
.packing = SOC_MBUS_PACKING_2X8_PADHI,
|
|
.order = SOC_MBUS_ORDER_LE,
|
|
.layout = SOC_MBUS_LAYOUT_PACKED,
|
|
},
|
|
};
|
|
|
|
/* This will be corrected as we get more formats */
|
|
static bool isi_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt)
|
|
{
|
|
return fmt->packing == SOC_MBUS_PACKING_NONE ||
|
|
(fmt->bits_per_sample == 8 &&
|
|
fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) ||
|
|
(fmt->bits_per_sample > 8 &&
|
|
fmt->packing == SOC_MBUS_PACKING_EXTEND16);
|
|
}
|
|
|
|
#define ISI_BUS_PARAM (V4L2_MBUS_MASTER | \
|
|
V4L2_MBUS_HSYNC_ACTIVE_HIGH | \
|
|
V4L2_MBUS_HSYNC_ACTIVE_LOW | \
|
|
V4L2_MBUS_VSYNC_ACTIVE_HIGH | \
|
|
V4L2_MBUS_VSYNC_ACTIVE_LOW | \
|
|
V4L2_MBUS_PCLK_SAMPLE_RISING | \
|
|
V4L2_MBUS_PCLK_SAMPLE_FALLING | \
|
|
V4L2_MBUS_DATA_ACTIVE_HIGH)
|
|
|
|
static int isi_camera_try_bus_param(struct soc_camera_device *icd,
|
|
unsigned char buswidth)
|
|
{
|
|
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
|
|
unsigned long common_flags;
|
|
int ret;
|
|
|
|
ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
|
|
if (!ret) {
|
|
common_flags = soc_mbus_config_compatible(&cfg,
|
|
ISI_BUS_PARAM);
|
|
if (!common_flags) {
|
|
dev_warn(icd->parent,
|
|
"Flags incompatible: camera 0x%x, host 0x%x\n",
|
|
cfg.flags, ISI_BUS_PARAM);
|
|
return -EINVAL;
|
|
}
|
|
} else if (ret != -ENOIOCTLCMD) {
|
|
return ret;
|
|
}
|
|
|
|
if ((1 << (buswidth - 1)) & isi->width_flags)
|
|
return 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
static int isi_camera_get_formats(struct soc_camera_device *icd,
|
|
unsigned int idx,
|
|
struct soc_camera_format_xlate *xlate)
|
|
{
|
|
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
|
|
int formats = 0, ret;
|
|
/* sensor format */
|
|
struct v4l2_subdev_mbus_code_enum code = {
|
|
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
.index = idx,
|
|
};
|
|
/* soc camera host format */
|
|
const struct soc_mbus_pixelfmt *fmt;
|
|
|
|
ret = v4l2_subdev_call(sd, pad, enum_mbus_code, NULL, &code);
|
|
if (ret < 0)
|
|
/* No more formats */
|
|
return 0;
|
|
|
|
fmt = soc_mbus_get_fmtdesc(code.code);
|
|
if (!fmt) {
|
|
dev_err(icd->parent,
|
|
"Invalid format code #%u: %d\n", idx, code.code);
|
|
return 0;
|
|
}
|
|
|
|
/* This also checks support for the requested bits-per-sample */
|
|
ret = isi_camera_try_bus_param(icd, fmt->bits_per_sample);
|
|
if (ret < 0) {
|
|
dev_err(icd->parent,
|
|
"Fail to try the bus parameters.\n");
|
|
return 0;
|
|
}
|
|
|
|
switch (code.code) {
|
|
case MEDIA_BUS_FMT_UYVY8_2X8:
|
|
case MEDIA_BUS_FMT_VYUY8_2X8:
|
|
case MEDIA_BUS_FMT_YUYV8_2X8:
|
|
case MEDIA_BUS_FMT_YVYU8_2X8:
|
|
formats++;
|
|
if (xlate) {
|
|
xlate->host_fmt = &isi_camera_formats[0];
|
|
xlate->code = code.code;
|
|
xlate++;
|
|
dev_dbg(icd->parent, "Providing format %s using code %d\n",
|
|
isi_camera_formats[0].name, code.code);
|
|
}
|
|
break;
|
|
default:
|
|
if (!isi_camera_packing_supported(fmt))
|
|
return 0;
|
|
if (xlate)
|
|
dev_dbg(icd->parent,
|
|
"Providing format %s in pass-through mode\n",
|
|
fmt->name);
|
|
}
|
|
|
|
/* Generic pass-through */
|
|
formats++;
|
|
if (xlate) {
|
|
xlate->host_fmt = fmt;
|
|
xlate->code = code.code;
|
|
xlate++;
|
|
}
|
|
|
|
return formats;
|
|
}
|
|
|
|
static int isi_camera_add_device(struct soc_camera_device *icd)
|
|
{
|
|
dev_dbg(icd->parent, "Atmel ISI Camera driver attached to camera %d\n",
|
|
icd->devnum);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void isi_camera_remove_device(struct soc_camera_device *icd)
|
|
{
|
|
dev_dbg(icd->parent, "Atmel ISI Camera driver detached from camera %d\n",
|
|
icd->devnum);
|
|
}
|
|
|
|
static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
|
|
{
|
|
struct soc_camera_device *icd = file->private_data;
|
|
|
|
return vb2_poll(&icd->vb2_vidq, file, pt);
|
|
}
|
|
|
|
static int isi_camera_querycap(struct soc_camera_host *ici,
|
|
struct v4l2_capability *cap)
|
|
{
|
|
strcpy(cap->driver, "atmel-isi");
|
|
strcpy(cap->card, "Atmel Image Sensor Interface");
|
|
cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
|
|
cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int isi_camera_set_bus_param(struct soc_camera_device *icd)
|
|
{
|
|
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
|
|
struct atmel_isi *isi = ici->priv;
|
|
struct v4l2_mbus_config cfg = {.type = V4L2_MBUS_PARALLEL,};
|
|
unsigned long common_flags;
|
|
int ret;
|
|
u32 cfg1 = 0;
|
|
|
|
ret = v4l2_subdev_call(sd, video, g_mbus_config, &cfg);
|
|
if (!ret) {
|
|
common_flags = soc_mbus_config_compatible(&cfg,
|
|
ISI_BUS_PARAM);
|
|
if (!common_flags) {
|
|
dev_warn(icd->parent,
|
|
"Flags incompatible: camera 0x%x, host 0x%x\n",
|
|
cfg.flags, ISI_BUS_PARAM);
|
|
return -EINVAL;
|
|
}
|
|
} else if (ret != -ENOIOCTLCMD) {
|
|
return ret;
|
|
} else {
|
|
common_flags = ISI_BUS_PARAM;
|
|
}
|
|
dev_dbg(icd->parent, "Flags cam: 0x%x host: 0x%x common: 0x%lx\n",
|
|
cfg.flags, ISI_BUS_PARAM, common_flags);
|
|
|
|
/* Make choises, based on platform preferences */
|
|
if ((common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) &&
|
|
(common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)) {
|
|
if (isi->pdata.hsync_act_low)
|
|
common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_HIGH;
|
|
else
|
|
common_flags &= ~V4L2_MBUS_HSYNC_ACTIVE_LOW;
|
|
}
|
|
|
|
if ((common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) &&
|
|
(common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)) {
|
|
if (isi->pdata.vsync_act_low)
|
|
common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_HIGH;
|
|
else
|
|
common_flags &= ~V4L2_MBUS_VSYNC_ACTIVE_LOW;
|
|
}
|
|
|
|
if ((common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING) &&
|
|
(common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)) {
|
|
if (isi->pdata.pclk_act_falling)
|
|
common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_RISING;
|
|
else
|
|
common_flags &= ~V4L2_MBUS_PCLK_SAMPLE_FALLING;
|
|
}
|
|
|
|
cfg.flags = common_flags;
|
|
ret = v4l2_subdev_call(sd, video, s_mbus_config, &cfg);
|
|
if (ret < 0 && ret != -ENOIOCTLCMD) {
|
|
dev_dbg(icd->parent, "camera s_mbus_config(0x%lx) returned %d\n",
|
|
common_flags, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* set bus param for ISI */
|
|
if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
|
|
cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW;
|
|
if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
|
|
cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW;
|
|
if (common_flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
|
|
cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING;
|
|
|
|
if (isi->pdata.has_emb_sync)
|
|
cfg1 |= ISI_CFG1_EMB_SYNC;
|
|
if (isi->pdata.full_mode)
|
|
cfg1 |= ISI_CFG1_FULL_MODE;
|
|
|
|
cfg1 |= ISI_CFG1_THMASK_BEATS_16;
|
|
|
|
/* Enable PM and peripheral clock before operate isi registers */
|
|
pm_runtime_get_sync(ici->v4l2_dev.dev);
|
|
|
|
isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
|
|
isi_writel(isi, ISI_CFG1, cfg1);
|
|
|
|
pm_runtime_put(ici->v4l2_dev.dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct soc_camera_host_ops isi_soc_camera_host_ops = {
|
|
.owner = THIS_MODULE,
|
|
.add = isi_camera_add_device,
|
|
.remove = isi_camera_remove_device,
|
|
.set_fmt = isi_camera_set_fmt,
|
|
.try_fmt = isi_camera_try_fmt,
|
|
.get_formats = isi_camera_get_formats,
|
|
.init_videobuf2 = isi_camera_init_videobuf,
|
|
.poll = isi_camera_poll,
|
|
.querycap = isi_camera_querycap,
|
|
.set_bus_param = isi_camera_set_bus_param,
|
|
};
|
|
|
|
/* -----------------------------------------------------------------------*/
|
|
static int atmel_isi_remove(struct platform_device *pdev)
|
|
{
|
|
struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
|
|
struct atmel_isi *isi = container_of(soc_host,
|
|
struct atmel_isi, soc_host);
|
|
|
|
soc_camera_host_unregister(soc_host);
|
|
vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
|
|
dma_free_coherent(&pdev->dev,
|
|
sizeof(struct fbd) * MAX_BUFFER_NUM,
|
|
isi->p_fb_descriptors,
|
|
isi->fb_descriptors_phys);
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_isi_probe_dt(struct atmel_isi *isi,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct device_node *np= pdev->dev.of_node;
|
|
struct v4l2_of_endpoint ep;
|
|
int err;
|
|
|
|
/* Default settings for ISI */
|
|
isi->pdata.full_mode = 1;
|
|
isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
|
|
|
|
np = of_graph_get_next_endpoint(np, NULL);
|
|
if (!np) {
|
|
dev_err(&pdev->dev, "Could not find the endpoint\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = v4l2_of_parse_endpoint(np, &ep);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Could not parse the endpoint\n");
|
|
goto err_probe_dt;
|
|
}
|
|
|
|
switch (ep.bus.parallel.bus_width) {
|
|
case 8:
|
|
isi->pdata.data_width_flags = ISI_DATAWIDTH_8;
|
|
break;
|
|
case 10:
|
|
isi->pdata.data_width_flags =
|
|
ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10;
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "Unsupported bus width: %d\n",
|
|
ep.bus.parallel.bus_width);
|
|
err = -EINVAL;
|
|
goto err_probe_dt;
|
|
}
|
|
|
|
err_probe_dt:
|
|
of_node_put(np);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int atmel_isi_probe(struct platform_device *pdev)
|
|
{
|
|
unsigned int irq;
|
|
struct atmel_isi *isi;
|
|
struct resource *regs;
|
|
int ret, i;
|
|
struct device *dev = &pdev->dev;
|
|
struct soc_camera_host *soc_host;
|
|
struct isi_platform_data *pdata;
|
|
|
|
pdata = dev->platform_data;
|
|
if ((!pdata || !pdata->data_width_flags) && !pdev->dev.of_node) {
|
|
dev_err(&pdev->dev,
|
|
"No config available for Atmel ISI\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
isi = devm_kzalloc(&pdev->dev, sizeof(struct atmel_isi), GFP_KERNEL);
|
|
if (!isi) {
|
|
dev_err(&pdev->dev, "Can't allocate interface!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
isi->pclk = devm_clk_get(&pdev->dev, "isi_clk");
|
|
if (IS_ERR(isi->pclk))
|
|
return PTR_ERR(isi->pclk);
|
|
|
|
if (pdata) {
|
|
memcpy(&isi->pdata, pdata, sizeof(isi->pdata));
|
|
} else {
|
|
ret = atmel_isi_probe_dt(isi, pdev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
isi->active = NULL;
|
|
spin_lock_init(&isi->lock);
|
|
INIT_LIST_HEAD(&isi->video_buffer_list);
|
|
INIT_LIST_HEAD(&isi->dma_desc_head);
|
|
|
|
isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev,
|
|
sizeof(struct fbd) * MAX_BUFFER_NUM,
|
|
&isi->fb_descriptors_phys,
|
|
GFP_KERNEL);
|
|
if (!isi->p_fb_descriptors) {
|
|
dev_err(&pdev->dev, "Can't allocate descriptors!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (i = 0; i < MAX_BUFFER_NUM; i++) {
|
|
isi->dma_desc[i].p_fbd = isi->p_fb_descriptors + i;
|
|
isi->dma_desc[i].fbd_phys = isi->fb_descriptors_phys +
|
|
i * sizeof(struct fbd);
|
|
list_add(&isi->dma_desc[i].list, &isi->dma_desc_head);
|
|
}
|
|
|
|
isi->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
|
|
if (IS_ERR(isi->alloc_ctx)) {
|
|
ret = PTR_ERR(isi->alloc_ctx);
|
|
goto err_alloc_ctx;
|
|
}
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
isi->regs = devm_ioremap_resource(&pdev->dev, regs);
|
|
if (IS_ERR(isi->regs)) {
|
|
ret = PTR_ERR(isi->regs);
|
|
goto err_ioremap;
|
|
}
|
|
|
|
if (isi->pdata.data_width_flags & ISI_DATAWIDTH_8)
|
|
isi->width_flags = 1 << 7;
|
|
if (isi->pdata.data_width_flags & ISI_DATAWIDTH_10)
|
|
isi->width_flags |= 1 << 9;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (IS_ERR_VALUE(irq)) {
|
|
ret = irq;
|
|
goto err_req_irq;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, isi_interrupt, 0, "isi", isi);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
|
|
goto err_req_irq;
|
|
}
|
|
isi->irq = irq;
|
|
|
|
soc_host = &isi->soc_host;
|
|
soc_host->drv_name = "isi-camera";
|
|
soc_host->ops = &isi_soc_camera_host_ops;
|
|
soc_host->priv = isi;
|
|
soc_host->v4l2_dev.dev = &pdev->dev;
|
|
soc_host->nr = pdev->id;
|
|
|
|
pm_suspend_ignore_children(&pdev->dev, true);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
if (isi->pdata.asd_sizes) {
|
|
soc_host->asd = isi->pdata.asd;
|
|
soc_host->asd_sizes = isi->pdata.asd_sizes;
|
|
}
|
|
|
|
ret = soc_camera_host_register(soc_host);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Unable to register soc camera host\n");
|
|
goto err_register_soc_camera_host;
|
|
}
|
|
return 0;
|
|
|
|
err_register_soc_camera_host:
|
|
pm_runtime_disable(&pdev->dev);
|
|
err_req_irq:
|
|
err_ioremap:
|
|
vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
|
|
err_alloc_ctx:
|
|
dma_free_coherent(&pdev->dev,
|
|
sizeof(struct fbd) * MAX_BUFFER_NUM,
|
|
isi->p_fb_descriptors,
|
|
isi->fb_descriptors_phys);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int atmel_isi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct soc_camera_host *soc_host = to_soc_camera_host(dev);
|
|
struct atmel_isi *isi = container_of(soc_host,
|
|
struct atmel_isi, soc_host);
|
|
|
|
clk_disable_unprepare(isi->pclk);
|
|
|
|
return 0;
|
|
}
|
|
static int atmel_isi_runtime_resume(struct device *dev)
|
|
{
|
|
struct soc_camera_host *soc_host = to_soc_camera_host(dev);
|
|
struct atmel_isi *isi = container_of(soc_host,
|
|
struct atmel_isi, soc_host);
|
|
|
|
return clk_prepare_enable(isi->pclk);
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct dev_pm_ops atmel_isi_dev_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend,
|
|
atmel_isi_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct of_device_id atmel_isi_of_match[] = {
|
|
{ .compatible = "atmel,at91sam9g45-isi" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, atmel_isi_of_match);
|
|
|
|
static struct platform_driver atmel_isi_driver = {
|
|
.remove = atmel_isi_remove,
|
|
.driver = {
|
|
.name = "atmel_isi",
|
|
.of_match_table = of_match_ptr(atmel_isi_of_match),
|
|
.pm = &atmel_isi_dev_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(atmel_isi_driver, atmel_isi_probe);
|
|
|
|
MODULE_AUTHOR("Josh Wu <josh.wu@atmel.com>");
|
|
MODULE_DESCRIPTION("The V4L2 driver for Atmel Linux");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_SUPPORTED_DEVICE("video");
|