mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-18 22:14:16 +00:00
8d88f6c9c5
In preparation of adding a new console UART specific pinctrl template, move the pinctrl reference to the board DT part. This forces people porting new boards to consider what exactly they need for their board. No functional change for the boards upstream. Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Link: https://lore.kernel.org/r/20250422-msm8916-console-pinctrl-v2-1-f345b7a53c91@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
420 lines
7.6 KiB
Text
420 lines
7.6 KiB
Text
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
/dts-v1/;
|
|
|
|
#include "msm8939-pm8916.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
|
|
|
/ {
|
|
model = "BQ Aquaris M5 (Longcheer L9100)";
|
|
compatible = "longcheer,l9100", "qcom,msm8939";
|
|
chassis-type = "handset";
|
|
|
|
aliases {
|
|
mmc0 = &sdhc_1; /* eMMC */
|
|
mmc1 = &sdhc_2; /* SD card */
|
|
serial0 = &blsp_uart2;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0";
|
|
};
|
|
|
|
gpio-hall-sensor {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&gpio_hall_sensor_default>;
|
|
pinctrl-names = "default";
|
|
|
|
label = "GPIO Hall Effect Sensor";
|
|
|
|
event-hall-sensor {
|
|
label = "Hall Effect Sensor";
|
|
gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <SW_LID>;
|
|
linux,can-disable;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-0 = <&gpio_keys_default>;
|
|
pinctrl-names = "default";
|
|
|
|
label = "GPIO Buttons";
|
|
|
|
button-volume-up {
|
|
label = "Volume Up";
|
|
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
gpios = <&tlmm 17 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
default-state = "off";
|
|
function = LED_FUNCTION_KBD_BACKLIGHT;
|
|
|
|
pinctrl-0 = <&button_backlight_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
};
|
|
|
|
reg_ts_vdd: regulator-vdd-ts {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "regulator-vdd-ts";
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
|
|
gpio = <&tlmm 78 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-0 = <&ts_vdd_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
backlight {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pm8916_pwm 0 100000>;
|
|
brightness-levels = <0 255>;
|
|
num-interpolated-steps = <255>;
|
|
default-brightness-level = <128>;
|
|
enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-0 = <&lcd_bl_en_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
flash-led-controller {
|
|
compatible = "ocs,ocp8110";
|
|
flash-gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
|
|
enable-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-0 = <&camera_front_flash_default>;
|
|
pinctrl-names = "default";
|
|
|
|
led {
|
|
function = LED_FUNCTION_FLASH;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
flash-max-timeout-us = <250000>;
|
|
};
|
|
};
|
|
|
|
usb_id: usb-id {
|
|
compatible = "linux,extcon-usb-gpio";
|
|
id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&usb_id_default &usb_id_switch_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
};
|
|
|
|
&blsp_i2c2 {
|
|
status = "okay";
|
|
|
|
led-controller@30 {
|
|
compatible = "kinetic,ktd2026";
|
|
reg = <0x30>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
vin-supply = <&pm8916_l17>;
|
|
vio-supply = <&pm8916_l6>;
|
|
|
|
pinctrl-0 = <&status_led_default>;
|
|
pinctrl-names = "default";
|
|
|
|
multi-led {
|
|
color = <LED_COLOR_ID_RGB>;
|
|
function = LED_FUNCTION_STATUS;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
};
|
|
};
|
|
|
|
flash-led-controller@53 {
|
|
compatible = "silergy,sy7802";
|
|
reg = <0x53>;
|
|
|
|
enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-0 = <&camera_rear_flash_default>;
|
|
pinctrl-names = "default";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
function = LED_FUNCTION_FLASH;
|
|
color = <LED_COLOR_ID_WHITE>;
|
|
led-sources = <0>, <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp_i2c3 {
|
|
status = "okay";
|
|
|
|
magnetometer@d {
|
|
compatible = "asahi-kasei,ak09911";
|
|
reg = <0x0d>;
|
|
|
|
vdd-supply = <&pm8916_l17>;
|
|
vid-supply = <&pm8916_l6>;
|
|
|
|
reset-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-0 = <&mag_reset_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
light-sensor@23 {
|
|
compatible = "liteon,ltr559";
|
|
reg = <0x23>;
|
|
proximity-near-level = <75>;
|
|
|
|
vdd-supply = <&pm8916_l17>;
|
|
vddio-supply = <&pm8916_l5>;
|
|
|
|
interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-0 = <&light_int_default>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
imu@68 {
|
|
compatible = "bosch,bmi160";
|
|
reg = <0x68>;
|
|
|
|
vdd-supply = <&pm8916_l17>;
|
|
vddio-supply = <&pm8916_l6>;
|
|
};
|
|
};
|
|
|
|
&blsp_i2c5 {
|
|
status = "okay";
|
|
|
|
touchscreen@4a {
|
|
compatible = "atmel,maxtouch";
|
|
reg = <0x4a>;
|
|
|
|
interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
|
|
|
|
vdda-supply = <&pm8916_l6>;
|
|
vdd-supply = <®_ts_vdd>;
|
|
|
|
pinctrl-0 = <&ts_int_reset_default>;
|
|
pinctrl-names = "default";
|
|
|
|
/* Keys listed from right to left */
|
|
linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
|
|
};
|
|
};
|
|
|
|
&blsp_uart2 {
|
|
pinctrl-0 = <&blsp_uart2_default>;
|
|
pinctrl-1 = <&blsp_uart2_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8916_gpios {
|
|
status_led_default: status-led-default-state {
|
|
pins = "gpio3";
|
|
function = PMIC_GPIO_FUNC_NORMAL;
|
|
power-source = <PM8916_GPIO_VPH>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
&pm8916_mpps {
|
|
pwm_out: mpp4-state {
|
|
pins = "mpp4";
|
|
function = "digital";
|
|
power-source = <PM8916_MPP_VPH>;
|
|
output-low;
|
|
qcom,dtest = <1>;
|
|
};
|
|
};
|
|
|
|
&pm8916_pwm {
|
|
pinctrl-0 = <&pwm_out>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8916_resin {
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pm8916_rpm_regulators {
|
|
pm8916_l17: l17 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
};
|
|
|
|
&pm8916_vib {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhc_2 {
|
|
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
|
|
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
&usb {
|
|
extcon = <&usb_id>, <&usb_id>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_hs_phy {
|
|
extcon = <&usb_id>;
|
|
};
|
|
|
|
&wcnss {
|
|
status = "okay";
|
|
};
|
|
|
|
&wcnss_iris {
|
|
compatible = "qcom,wcn3620";
|
|
};
|
|
|
|
&wcnss_mem {
|
|
status = "okay";
|
|
};
|
|
|
|
&tlmm {
|
|
button_backlight_default: button-backlight-default-state {
|
|
pins = "gpio17";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
camera_front_flash_default: camera-front-flash-default-state {
|
|
pins = "gpio8", "gpio49";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
camera_rear_flash_default: camera-rear-flash-default-state {
|
|
pins = "gpio9", "gpio16", "gpio51";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
|
|
pins = "gpio20";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
gpio_keys_default: gpio-keys-default-state {
|
|
pins = "gpio107";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
lcd_bl_en_default: lcd-bl-en-default-state {
|
|
pins = "gpio98";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
light_int_default: light-int-default-state {
|
|
pins = "gpio113";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
mag_reset_default: mag-reset-default-state {
|
|
pins = "gpio68";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
sdc2_cd_default: sdc2-cd-default-state {
|
|
pins = "gpio38";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
ts_int_reset_default: ts-int-reset-default-state {
|
|
pins = "gpio12", "gpio13";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
ts_vdd_default: ts-vdd-default-state {
|
|
pins = "gpio78";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
usb_id_default: usb-id-default-state {
|
|
pins = "gpio110";
|
|
function = "gpio";
|
|
drive-strength = <8>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
usb_id_switch_default: usb-id-switch-default-state {
|
|
pins = "gpio121";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
output-high;
|
|
};
|
|
};
|