mirror of
				git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
				synced 2025-11-01 09:13:37 +00:00 
			
		
		
		
	New drivers:
 
 - New driver for Oxnas pin control and GPIO. This ARM-based chipset
   is used in a few storage (NAS) type devices.
 
 - New driver for the MAX77620/MAX20024 pin controller portions.
 
 - New driver for the Intel Merrifield pin controller.
 
 New subdrivers:
 
 - New subdriver for the Qualcomm MDM9615
 
 - New subdriver for the STM32F746 MCU
 
 - New subdriver for the Broadcom NSP SoC.
 
 Cleanups:
 
 - Demodularization of bool compiled-in drivers.
 
 Apart from this there is just regular incremental improvements to
 a lot of drivers, especially Uniphier and PFC.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXmcthAAoJEEEQszewGV1z2ukP/1T34tgMllEzBcnyTM28pnPl
 80anOiCi/jkLuW1hYTLc4Rx0tZT2oWw9hrZdKGNMuzNCaJSmFaRhUrbzxhZ8E+6O
 3AHYSopAYUTKVYJsuY+fs3HbNajKBsSWYdmxin4e953BPudLjhZ2WliDXxupsbwZ
 /KI6s8J2pDZcPurrlozT5Avp3BTwwCq+fo12NIMkkmuhURb69OsDAVjPlwjocq73
 BKcdH8AdgO7w5Ss5/IQbvrhyuFc2kCQ/wH1tiuE2a4iYWhp+QkMOEqWUSdYs33bx
 Sbn3KTK6IYYS1eb4xharh7H/zoBs20aCQ2kS8qbYmG+Fv7rB7qboI0qM7m7+25O8
 7F6Tf4F0HUg6IjcABcI5lFuTxACBG8p5ZlmQAp/36EaeIblLALBCvd1ArmZ6fdG+
 Pzu5vLaZBAmxQn6EseHLAJkH4FEzV7II/Sk7U23TINHUpl/L2GJO+6irz7eelKAk
 XED6mrNU8rRnZMka02ZnIgIbABG7ELNJsRxEnf8k9CX7cfi4p568eZeR1nfKcy4+
 uldJLipNv3NfwuRY5JEEa7pFW4azYmnzS1GcoVYPy7snYc4Rr8cbBD6YvcxyMhVz
 RXHc21mj45JnboldAYU59t5BbVZNwZqF8hmg935ngoaZjYfhhnfGoNQF7hy6/1fS
 bwojoQtBqGcriKZYGs0o
 =po0g
 -----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.8 kernel cycle.
  Nothing stands out as especially exiting: new drivers, new subdrivers,
  lots of cleanups and incremental features.
  Business as usual.
  New drivers:
   - New driver for Oxnas pin control and GPIO.  This ARM-based chipset
     is used in a few storage (NAS) type devices.
   - New driver for the MAX77620/MAX20024 pin controller portions.
   - New driver for the Intel Merrifield pin controller.
  New subdrivers:
   - New subdriver for the Qualcomm MDM9615
   - New subdriver for the STM32F746 MCU
   - New subdriver for the Broadcom NSP SoC.
  Cleanups:
   - Demodularization of bool compiled-in drivers.
  Apart from this there is just regular incremental improvements to a
  lot of drivers, especially Uniphier and PFC"
* tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits)
  pinctrl: fix pincontrol definition for marvell
  pinctrl: xway: fix typo
  Revert "pinctrl: amd: make it explicitly non-modular"
  pinctrl: iproc: Add NSP and Stingray GPIO support
  pinctrl: Update iProc GPIO DT bindings
  pinctrl: bcm: add OF dependencies
  pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe()
  pinctrl: Add STM32F746 MCU support
  pinctrl: intel: Protect set wake flow by spin lock
  pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe()
  pinctrl: uniphier: add Ethernet pin-mux settings
  sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code
  pinctrl: ns2: fix return value check in ns2_pinmux_probe()
  pinctrl: qcom: update DT bindings with ebi2 groups
  pinctrl: qcom: establish proper EBI2 pin groups
  pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro
  Documentation: dt: Add new compatible to STM32 pinctrl driver bindings
  includes: dt-bindings: Add STM32F746 pinctrl DT bindings
  pinctrl: sunxi: fix nand0 function name for sun8i
  pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11
  ...
		
	
			
		
			
				
	
	
		
			1801 lines
		
	
	
	
		
			65 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1801 lines
		
	
	
	
		
			65 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 *  linux/drivers/pinctrl/pinmux-xway.c
 | 
						|
 *  based on linux/drivers/pinctrl/pinmux-pxa910.c
 | 
						|
 *
 | 
						|
 *  This program is free software; you can redistribute it and/or modify
 | 
						|
 *  it under the terms of the GNU General Public License version 2 as
 | 
						|
 *  publishhed by the Free Software Foundation.
 | 
						|
 *
 | 
						|
 *  Copyright (C) 2012 John Crispin <blogic@openwrt.org>
 | 
						|
 *  Copyright (C) 2015 Martin Schiller <mschiller@tdt.de>
 | 
						|
 */
 | 
						|
 | 
						|
#include <linux/err.h>
 | 
						|
#include <linux/slab.h>
 | 
						|
#include <linux/module.h>
 | 
						|
#include <linux/of_platform.h>
 | 
						|
#include <linux/of_address.h>
 | 
						|
#include <linux/of_gpio.h>
 | 
						|
#include <linux/ioport.h>
 | 
						|
#include <linux/io.h>
 | 
						|
#include <linux/device.h>
 | 
						|
#include <linux/platform_device.h>
 | 
						|
 | 
						|
#include "pinctrl-lantiq.h"
 | 
						|
 | 
						|
#include <lantiq_soc.h>
 | 
						|
 | 
						|
/* we have up to 4 banks of 16 bit each */
 | 
						|
#define PINS			16
 | 
						|
#define PORT3			3
 | 
						|
#define PORT(x)			(x / PINS)
 | 
						|
#define PORT_PIN(x)		(x % PINS)
 | 
						|
 | 
						|
/* we have 2 mux bits that can be set for each pin */
 | 
						|
#define MUX_ALT0	0x1
 | 
						|
#define MUX_ALT1	0x2
 | 
						|
 | 
						|
/*
 | 
						|
 * each bank has this offset apart from the 4th bank that is mixed into the
 | 
						|
 * other 3 ranges
 | 
						|
 */
 | 
						|
#define REG_OFF			0x30
 | 
						|
 | 
						|
/* these are the offsets to our registers */
 | 
						|
#define GPIO_BASE(p)		(REG_OFF * PORT(p))
 | 
						|
#define GPIO_OUT(p)		GPIO_BASE(p)
 | 
						|
#define GPIO_IN(p)		(GPIO_BASE(p) + 0x04)
 | 
						|
#define GPIO_DIR(p)		(GPIO_BASE(p) + 0x08)
 | 
						|
#define GPIO_ALT0(p)		(GPIO_BASE(p) + 0x0C)
 | 
						|
#define GPIO_ALT1(p)		(GPIO_BASE(p) + 0x10)
 | 
						|
#define GPIO_OD(p)		(GPIO_BASE(p) + 0x14)
 | 
						|
#define GPIO_PUDSEL(p)		(GPIO_BASE(p) + 0x1c)
 | 
						|
#define GPIO_PUDEN(p)		(GPIO_BASE(p) + 0x20)
 | 
						|
 | 
						|
/* the 4th port needs special offsets for some registers */
 | 
						|
#define GPIO3_OD		(GPIO_BASE(0) + 0x24)
 | 
						|
#define GPIO3_PUDSEL		(GPIO_BASE(0) + 0x28)
 | 
						|
#define GPIO3_PUDEN		(GPIO_BASE(0) + 0x2C)
 | 
						|
#define GPIO3_ALT1		(GPIO_BASE(PINS) + 0x24)
 | 
						|
 | 
						|
/* macros to help us access the registers */
 | 
						|
#define gpio_getbit(m, r, p)	(!!(ltq_r32(m + r) & BIT(p)))
 | 
						|
#define gpio_setbit(m, r, p)	ltq_w32_mask(0, BIT(p), m + r)
 | 
						|
#define gpio_clearbit(m, r, p)	ltq_w32_mask(BIT(p), 0, m + r)
 | 
						|
 | 
						|
#define MFP_XWAY(a, f0, f1, f2, f3)	\
 | 
						|
	{				\
 | 
						|
		.name = #a,		\
 | 
						|
		.pin = a,		\
 | 
						|
		.func = {		\
 | 
						|
			XWAY_MUX_##f0,	\
 | 
						|
			XWAY_MUX_##f1,	\
 | 
						|
			XWAY_MUX_##f2,	\
 | 
						|
			XWAY_MUX_##f3,	\
 | 
						|
		},			\
 | 
						|
	}
 | 
						|
 | 
						|
#define GRP_MUX(a, m, p)		\
 | 
						|
	{ .name = a, .mux = XWAY_MUX_##m, .pins = p, .npins = ARRAY_SIZE(p), }
 | 
						|
 | 
						|
#define FUNC_MUX(f, m)		\
 | 
						|
	{ .func = f, .mux = XWAY_MUX_##m, }
 | 
						|
 | 
						|
enum xway_mux {
 | 
						|
	XWAY_MUX_GPIO = 0,
 | 
						|
	XWAY_MUX_SPI,
 | 
						|
	XWAY_MUX_ASC,
 | 
						|
	XWAY_MUX_USIF,
 | 
						|
	XWAY_MUX_PCI,
 | 
						|
	XWAY_MUX_CBUS,
 | 
						|
	XWAY_MUX_CGU,
 | 
						|
	XWAY_MUX_EBU,
 | 
						|
	XWAY_MUX_EBU2,
 | 
						|
	XWAY_MUX_JTAG,
 | 
						|
	XWAY_MUX_MCD,
 | 
						|
	XWAY_MUX_EXIN,
 | 
						|
	XWAY_MUX_TDM,
 | 
						|
	XWAY_MUX_STP,
 | 
						|
	XWAY_MUX_SIN,
 | 
						|
	XWAY_MUX_GPT,
 | 
						|
	XWAY_MUX_NMI,
 | 
						|
	XWAY_MUX_MDIO,
 | 
						|
	XWAY_MUX_MII,
 | 
						|
	XWAY_MUX_EPHY,
 | 
						|
	XWAY_MUX_DFE,
 | 
						|
	XWAY_MUX_SDIO,
 | 
						|
	XWAY_MUX_GPHY,
 | 
						|
	XWAY_MUX_SSI,
 | 
						|
	XWAY_MUX_WIFI,
 | 
						|
	XWAY_MUX_NONE = 0xffff,
 | 
						|
};
 | 
						|
 | 
						|
/* ---------  DEPRECATED: xr9 related code --------- */
 | 
						|
/* ----------  use xrx100/xrx200 instead  ---------- */
 | 
						|
#define XR9_MAX_PIN		56
 | 
						|
 | 
						|
static const struct ltq_mfp_pin xway_mfp[] = {
 | 
						|
	/*       pin    f0	f1	f2	f3   */
 | 
						|
	MFP_XWAY(GPIO0, GPIO,	EXIN,	NONE,	TDM),
 | 
						|
	MFP_XWAY(GPIO1, GPIO,	EXIN,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO2, GPIO,	CGU,	EXIN,	GPHY),
 | 
						|
	MFP_XWAY(GPIO3, GPIO,	CGU,	NONE,	PCI),
 | 
						|
	MFP_XWAY(GPIO4, GPIO,	STP,	NONE,	ASC),
 | 
						|
	MFP_XWAY(GPIO5, GPIO,	STP,	GPHY,	NONE),
 | 
						|
	MFP_XWAY(GPIO6, GPIO,	STP,	GPT,	ASC),
 | 
						|
	MFP_XWAY(GPIO7, GPIO,	CGU,	PCI,	GPHY),
 | 
						|
	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	NONE),
 | 
						|
	MFP_XWAY(GPIO9, GPIO,	ASC,	SPI,	EXIN),
 | 
						|
	MFP_XWAY(GPIO10, GPIO,	ASC,	SPI,	NONE),
 | 
						|
	MFP_XWAY(GPIO11, GPIO,	ASC,	PCI,	SPI),
 | 
						|
	MFP_XWAY(GPIO12, GPIO,	ASC,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO13, GPIO,	EBU,	SPI,	NONE),
 | 
						|
	MFP_XWAY(GPIO14, GPIO,	CGU,	PCI,	NONE),
 | 
						|
	MFP_XWAY(GPIO15, GPIO,	SPI,	JTAG,	NONE),
 | 
						|
	MFP_XWAY(GPIO16, GPIO,	SPI,	NONE,	JTAG),
 | 
						|
	MFP_XWAY(GPIO17, GPIO,	SPI,	NONE,	JTAG),
 | 
						|
	MFP_XWAY(GPIO18, GPIO,	SPI,	NONE,	JTAG),
 | 
						|
	MFP_XWAY(GPIO19, GPIO,	PCI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO20, GPIO,	JTAG,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO21, GPIO,	PCI,	EBU,	GPT),
 | 
						|
	MFP_XWAY(GPIO22, GPIO,	SPI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO23, GPIO,	EBU,	PCI,	STP),
 | 
						|
	MFP_XWAY(GPIO24, GPIO,	EBU,	TDM,	PCI),
 | 
						|
	MFP_XWAY(GPIO25, GPIO,	TDM,	NONE,	ASC),
 | 
						|
	MFP_XWAY(GPIO26, GPIO,	EBU,	NONE,	TDM),
 | 
						|
	MFP_XWAY(GPIO27, GPIO,	TDM,	NONE,	ASC),
 | 
						|
	MFP_XWAY(GPIO28, GPIO,	GPT,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO29, GPIO,	PCI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO30, GPIO,	PCI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO31, GPIO,	EBU,	PCI,	NONE),
 | 
						|
	MFP_XWAY(GPIO32, GPIO,	NONE,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO33, GPIO,	NONE,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO34, GPIO,	NONE,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO35, GPIO,	NONE,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO36, GPIO,	SIN,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO37, GPIO,	PCI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO38, GPIO,	PCI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO39, GPIO,	EXIN,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO40, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO41, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO44, GPIO,	MII,	SIN,	GPHY),
 | 
						|
	MFP_XWAY(GPIO45, GPIO,	NONE,	GPHY,	SIN),
 | 
						|
	MFP_XWAY(GPIO46, GPIO,	NONE,	NONE,	EXIN),
 | 
						|
	MFP_XWAY(GPIO47, GPIO,	MII,	GPHY,	SIN),
 | 
						|
	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO50, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO51, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO52, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO53, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO54, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO55, GPIO,	NONE,	NONE,	NONE),
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35};
 | 
						|
static const unsigned pins_asc0[] = {GPIO11, GPIO12};
 | 
						|
static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10};
 | 
						|
static const unsigned pins_stp[] = {GPIO4, GPIO5, GPIO6};
 | 
						|
static const unsigned pins_nmi[] = {GPIO8};
 | 
						|
static const unsigned pins_mdio[] = {GPIO42, GPIO43};
 | 
						|
 | 
						|
static const unsigned pins_gphy0_led0[] = {GPIO5};
 | 
						|
static const unsigned pins_gphy0_led1[] = {GPIO7};
 | 
						|
static const unsigned pins_gphy0_led2[] = {GPIO2};
 | 
						|
static const unsigned pins_gphy1_led0[] = {GPIO44};
 | 
						|
static const unsigned pins_gphy1_led1[] = {GPIO45};
 | 
						|
static const unsigned pins_gphy1_led2[] = {GPIO47};
 | 
						|
 | 
						|
static const unsigned pins_ebu_a24[] = {GPIO13};
 | 
						|
static const unsigned pins_ebu_clk[] = {GPIO21};
 | 
						|
static const unsigned pins_ebu_cs1[] = {GPIO23};
 | 
						|
static const unsigned pins_ebu_a23[] = {GPIO24};
 | 
						|
static const unsigned pins_ebu_wait[] = {GPIO26};
 | 
						|
static const unsigned pins_ebu_a25[] = {GPIO31};
 | 
						|
static const unsigned pins_ebu_rdy[] = {GPIO48};
 | 
						|
static const unsigned pins_ebu_rd[] = {GPIO49};
 | 
						|
 | 
						|
static const unsigned pins_nand_ale[] = {GPIO13};
 | 
						|
static const unsigned pins_nand_cs1[] = {GPIO23};
 | 
						|
static const unsigned pins_nand_cle[] = {GPIO24};
 | 
						|
static const unsigned pins_nand_rdy[] = {GPIO48};
 | 
						|
static const unsigned pins_nand_rd[] = {GPIO49};
 | 
						|
 | 
						|
static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9};
 | 
						|
 | 
						|
static const unsigned pins_exin0[] = {GPIO0};
 | 
						|
static const unsigned pins_exin1[] = {GPIO1};
 | 
						|
static const unsigned pins_exin2[] = {GPIO2};
 | 
						|
static const unsigned pins_exin3[] = {GPIO39};
 | 
						|
static const unsigned pins_exin4[] = {GPIO46};
 | 
						|
static const unsigned pins_exin5[] = {GPIO9};
 | 
						|
 | 
						|
static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18};
 | 
						|
static const unsigned pins_spi_cs1[] = {GPIO15};
 | 
						|
static const unsigned pins_spi_cs2[] = {GPIO22};
 | 
						|
static const unsigned pins_spi_cs3[] = {GPIO13};
 | 
						|
static const unsigned pins_spi_cs4[] = {GPIO10};
 | 
						|
static const unsigned pins_spi_cs5[] = {GPIO9};
 | 
						|
static const unsigned pins_spi_cs6[] = {GPIO11};
 | 
						|
 | 
						|
static const unsigned pins_gpt1[] = {GPIO28};
 | 
						|
static const unsigned pins_gpt2[] = {GPIO21};
 | 
						|
static const unsigned pins_gpt3[] = {GPIO6};
 | 
						|
 | 
						|
static const unsigned pins_clkout0[] = {GPIO8};
 | 
						|
static const unsigned pins_clkout1[] = {GPIO7};
 | 
						|
static const unsigned pins_clkout2[] = {GPIO3};
 | 
						|
static const unsigned pins_clkout3[] = {GPIO2};
 | 
						|
 | 
						|
static const unsigned pins_pci_gnt1[] = {GPIO30};
 | 
						|
static const unsigned pins_pci_gnt2[] = {GPIO23};
 | 
						|
static const unsigned pins_pci_gnt3[] = {GPIO19};
 | 
						|
static const unsigned pins_pci_gnt4[] = {GPIO38};
 | 
						|
static const unsigned pins_pci_req1[] = {GPIO29};
 | 
						|
static const unsigned pins_pci_req2[] = {GPIO31};
 | 
						|
static const unsigned pins_pci_req3[] = {GPIO3};
 | 
						|
static const unsigned pins_pci_req4[] = {GPIO37};
 | 
						|
 | 
						|
static const struct ltq_pin_group xway_grps[] = {
 | 
						|
	GRP_MUX("exin0", EXIN, pins_exin0),
 | 
						|
	GRP_MUX("exin1", EXIN, pins_exin1),
 | 
						|
	GRP_MUX("exin2", EXIN, pins_exin2),
 | 
						|
	GRP_MUX("jtag", JTAG, pins_jtag),
 | 
						|
	GRP_MUX("ebu a23", EBU, pins_ebu_a23),
 | 
						|
	GRP_MUX("ebu a24", EBU, pins_ebu_a24),
 | 
						|
	GRP_MUX("ebu a25", EBU, pins_ebu_a25),
 | 
						|
	GRP_MUX("ebu clk", EBU, pins_ebu_clk),
 | 
						|
	GRP_MUX("ebu cs1", EBU, pins_ebu_cs1),
 | 
						|
	GRP_MUX("ebu wait", EBU, pins_ebu_wait),
 | 
						|
	GRP_MUX("nand ale", EBU, pins_nand_ale),
 | 
						|
	GRP_MUX("nand cs1", EBU, pins_nand_cs1),
 | 
						|
	GRP_MUX("nand cle", EBU, pins_nand_cle),
 | 
						|
	GRP_MUX("spi", SPI, pins_spi),
 | 
						|
	GRP_MUX("spi_cs1", SPI, pins_spi_cs1),
 | 
						|
	GRP_MUX("spi_cs2", SPI, pins_spi_cs2),
 | 
						|
	GRP_MUX("spi_cs3", SPI, pins_spi_cs3),
 | 
						|
	GRP_MUX("spi_cs4", SPI, pins_spi_cs4),
 | 
						|
	GRP_MUX("spi_cs5", SPI, pins_spi_cs5),
 | 
						|
	GRP_MUX("spi_cs6", SPI, pins_spi_cs6),
 | 
						|
	GRP_MUX("asc0", ASC, pins_asc0),
 | 
						|
	GRP_MUX("asc0 cts rts", ASC, pins_asc0_cts_rts),
 | 
						|
	GRP_MUX("stp", STP, pins_stp),
 | 
						|
	GRP_MUX("nmi", NMI, pins_nmi),
 | 
						|
	GRP_MUX("gpt1", GPT, pins_gpt1),
 | 
						|
	GRP_MUX("gpt2", GPT, pins_gpt2),
 | 
						|
	GRP_MUX("gpt3", GPT, pins_gpt3),
 | 
						|
	GRP_MUX("clkout0", CGU, pins_clkout0),
 | 
						|
	GRP_MUX("clkout1", CGU, pins_clkout1),
 | 
						|
	GRP_MUX("clkout2", CGU, pins_clkout2),
 | 
						|
	GRP_MUX("clkout3", CGU, pins_clkout3),
 | 
						|
	GRP_MUX("gnt1", PCI, pins_pci_gnt1),
 | 
						|
	GRP_MUX("gnt2", PCI, pins_pci_gnt2),
 | 
						|
	GRP_MUX("gnt3", PCI, pins_pci_gnt3),
 | 
						|
	GRP_MUX("req1", PCI, pins_pci_req1),
 | 
						|
	GRP_MUX("req2", PCI, pins_pci_req2),
 | 
						|
	GRP_MUX("req3", PCI, pins_pci_req3),
 | 
						|
/* xrx only */
 | 
						|
	GRP_MUX("nand rdy", EBU, pins_nand_rdy),
 | 
						|
	GRP_MUX("nand rd", EBU, pins_nand_rd),
 | 
						|
	GRP_MUX("exin3", EXIN, pins_exin3),
 | 
						|
	GRP_MUX("exin4", EXIN, pins_exin4),
 | 
						|
	GRP_MUX("exin5", EXIN, pins_exin5),
 | 
						|
	GRP_MUX("gnt4", PCI, pins_pci_gnt4),
 | 
						|
	GRP_MUX("req4", PCI, pins_pci_gnt4),
 | 
						|
	GRP_MUX("mdio", MDIO, pins_mdio),
 | 
						|
	GRP_MUX("gphy0 led0", GPHY, pins_gphy0_led0),
 | 
						|
	GRP_MUX("gphy0 led1", GPHY, pins_gphy0_led1),
 | 
						|
	GRP_MUX("gphy0 led2", GPHY, pins_gphy0_led2),
 | 
						|
	GRP_MUX("gphy1 led0", GPHY, pins_gphy1_led0),
 | 
						|
	GRP_MUX("gphy1 led1", GPHY, pins_gphy1_led1),
 | 
						|
	GRP_MUX("gphy1 led2", GPHY, pins_gphy1_led2),
 | 
						|
};
 | 
						|
 | 
						|
static const char * const xway_pci_grps[] = {"gnt1", "gnt2",
 | 
						|
						"gnt3", "req1",
 | 
						|
						"req2", "req3"};
 | 
						|
static const char * const xway_spi_grps[] = {"spi", "spi_cs1",
 | 
						|
						"spi_cs2", "spi_cs3",
 | 
						|
						"spi_cs4", "spi_cs5",
 | 
						|
						"spi_cs6"};
 | 
						|
static const char * const xway_cgu_grps[] = {"clkout0", "clkout1",
 | 
						|
						"clkout2", "clkout3"};
 | 
						|
static const char * const xway_ebu_grps[] = {"ebu a23", "ebu a24",
 | 
						|
						"ebu a25", "ebu cs1",
 | 
						|
						"ebu wait", "ebu clk",
 | 
						|
						"nand ale", "nand cs1",
 | 
						|
						"nand cle"};
 | 
						|
static const char * const xway_exin_grps[] = {"exin0", "exin1", "exin2"};
 | 
						|
static const char * const xway_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
 | 
						|
static const char * const xway_asc_grps[] = {"asc0", "asc0 cts rts"};
 | 
						|
static const char * const xway_jtag_grps[] = {"jtag"};
 | 
						|
static const char * const xway_stp_grps[] = {"stp"};
 | 
						|
static const char * const xway_nmi_grps[] = {"nmi"};
 | 
						|
 | 
						|
/* ar9/vr9/gr9 */
 | 
						|
static const char * const xrx_mdio_grps[] = {"mdio"};
 | 
						|
static const char * const xrx_gphy_grps[] = {"gphy0 led0", "gphy0 led1",
 | 
						|
						"gphy0 led2", "gphy1 led0",
 | 
						|
						"gphy1 led1", "gphy1 led2"};
 | 
						|
static const char * const xrx_ebu_grps[] = {"ebu a23", "ebu a24",
 | 
						|
						"ebu a25", "ebu cs1",
 | 
						|
						"ebu wait", "ebu clk",
 | 
						|
						"nand ale", "nand cs1",
 | 
						|
						"nand cle", "nand rdy",
 | 
						|
						"nand rd"};
 | 
						|
static const char * const xrx_exin_grps[] = {"exin0", "exin1", "exin2",
 | 
						|
						"exin3", "exin4", "exin5"};
 | 
						|
static const char * const xrx_pci_grps[] = {"gnt1", "gnt2",
 | 
						|
						"gnt3", "gnt4",
 | 
						|
						"req1", "req2",
 | 
						|
						"req3", "req4"};
 | 
						|
 | 
						|
static const struct ltq_pmx_func xrx_funcs[] = {
 | 
						|
	{"spi",		ARRAY_AND_SIZE(xway_spi_grps)},
 | 
						|
	{"asc",		ARRAY_AND_SIZE(xway_asc_grps)},
 | 
						|
	{"cgu",		ARRAY_AND_SIZE(xway_cgu_grps)},
 | 
						|
	{"jtag",	ARRAY_AND_SIZE(xway_jtag_grps)},
 | 
						|
	{"exin",	ARRAY_AND_SIZE(xrx_exin_grps)},
 | 
						|
	{"stp",		ARRAY_AND_SIZE(xway_stp_grps)},
 | 
						|
	{"gpt",		ARRAY_AND_SIZE(xway_gpt_grps)},
 | 
						|
	{"nmi",		ARRAY_AND_SIZE(xway_nmi_grps)},
 | 
						|
	{"pci",		ARRAY_AND_SIZE(xrx_pci_grps)},
 | 
						|
	{"ebu",		ARRAY_AND_SIZE(xrx_ebu_grps)},
 | 
						|
	{"mdio",	ARRAY_AND_SIZE(xrx_mdio_grps)},
 | 
						|
	{"gphy",	ARRAY_AND_SIZE(xrx_gphy_grps)},
 | 
						|
};
 | 
						|
 | 
						|
/* ---------  ase related code --------- */
 | 
						|
#define ASE_MAX_PIN		32
 | 
						|
 | 
						|
static const struct ltq_mfp_pin ase_mfp[] = {
 | 
						|
	/*       pin    f0	f1	f2	f3   */
 | 
						|
	MFP_XWAY(GPIO0, GPIO,	EXIN,	MII,	TDM),
 | 
						|
	MFP_XWAY(GPIO1, GPIO,	STP,	DFE,	EBU),
 | 
						|
	MFP_XWAY(GPIO2, GPIO,	STP,	DFE,	EPHY),
 | 
						|
	MFP_XWAY(GPIO3, GPIO,	STP,	EPHY,	EBU),
 | 
						|
	MFP_XWAY(GPIO4, GPIO,	GPT,	EPHY,	MII),
 | 
						|
	MFP_XWAY(GPIO5, GPIO,	MII,	ASC,	GPT),
 | 
						|
	MFP_XWAY(GPIO6, GPIO,	MII,	ASC,	EXIN),
 | 
						|
	MFP_XWAY(GPIO7, GPIO,	SPI,	MII,	JTAG),
 | 
						|
	MFP_XWAY(GPIO8, GPIO,	SPI,	MII,	JTAG),
 | 
						|
	MFP_XWAY(GPIO9, GPIO,	SPI,	MII,	JTAG),
 | 
						|
	MFP_XWAY(GPIO10, GPIO,	SPI,	MII,	JTAG),
 | 
						|
	MFP_XWAY(GPIO11, GPIO,	EBU,	CGU,	JTAG),
 | 
						|
	MFP_XWAY(GPIO12, GPIO,	EBU,	MII,	SDIO),
 | 
						|
	MFP_XWAY(GPIO13, GPIO,	EBU,	MII,	CGU),
 | 
						|
	MFP_XWAY(GPIO14, GPIO,	EBU,	SPI,	CGU),
 | 
						|
	MFP_XWAY(GPIO15, GPIO,	EBU,	SPI,	SDIO),
 | 
						|
	MFP_XWAY(GPIO16, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO17, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO18, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO19, GPIO,	EBU,	MII,	SDIO),
 | 
						|
	MFP_XWAY(GPIO20, GPIO,	EBU,	MII,	SDIO),
 | 
						|
	MFP_XWAY(GPIO21, GPIO,	EBU,	MII,	EBU2),
 | 
						|
	MFP_XWAY(GPIO22, GPIO,	EBU,	MII,	CGU),
 | 
						|
	MFP_XWAY(GPIO23, GPIO,	EBU,	MII,	CGU),
 | 
						|
	MFP_XWAY(GPIO24, GPIO,	EBU,	EBU2,	MDIO),
 | 
						|
	MFP_XWAY(GPIO25, GPIO,	EBU,	MII,	GPT),
 | 
						|
	MFP_XWAY(GPIO26, GPIO,	EBU,	MII,	SDIO),
 | 
						|
	MFP_XWAY(GPIO27, GPIO,	EBU,	NONE,	MDIO),
 | 
						|
	MFP_XWAY(GPIO28, GPIO,	MII,	EBU,	SDIO),
 | 
						|
	MFP_XWAY(GPIO29, GPIO,	EBU,	MII,	EXIN),
 | 
						|
	MFP_XWAY(GPIO30, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO31, GPIO,	NONE,	NONE,	NONE),
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned ase_exin_pin_map[] = {GPIO6, GPIO29, GPIO0};
 | 
						|
 | 
						|
static const unsigned ase_pins_exin0[] = {GPIO6};
 | 
						|
static const unsigned ase_pins_exin1[] = {GPIO29};
 | 
						|
static const unsigned ase_pins_exin2[] = {GPIO0};
 | 
						|
 | 
						|
static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11};
 | 
						|
static const unsigned ase_pins_asc[] = {GPIO5, GPIO6};
 | 
						|
static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3};
 | 
						|
static const unsigned ase_pins_mdio[] = {GPIO24, GPIO27};
 | 
						|
static const unsigned ase_pins_ephy_led0[] = {GPIO2};
 | 
						|
static const unsigned ase_pins_ephy_led1[] = {GPIO3};
 | 
						|
static const unsigned ase_pins_ephy_led2[] = {GPIO4};
 | 
						|
static const unsigned ase_pins_dfe_led0[] = {GPIO1};
 | 
						|
static const unsigned ase_pins_dfe_led1[] = {GPIO2};
 | 
						|
 | 
						|
static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; /* DEPRECATED */
 | 
						|
static const unsigned ase_pins_spi_di[] = {GPIO8};
 | 
						|
static const unsigned ase_pins_spi_do[] = {GPIO9};
 | 
						|
static const unsigned ase_pins_spi_clk[] = {GPIO10};
 | 
						|
static const unsigned ase_pins_spi_cs1[] = {GPIO7};
 | 
						|
static const unsigned ase_pins_spi_cs2[] = {GPIO15};
 | 
						|
static const unsigned ase_pins_spi_cs3[] = {GPIO14};
 | 
						|
 | 
						|
static const unsigned ase_pins_gpt1[] = {GPIO5};
 | 
						|
static const unsigned ase_pins_gpt2[] = {GPIO4};
 | 
						|
static const unsigned ase_pins_gpt3[] = {GPIO25};
 | 
						|
 | 
						|
static const unsigned ase_pins_clkout0[] = {GPIO23};
 | 
						|
static const unsigned ase_pins_clkout1[] = {GPIO22};
 | 
						|
static const unsigned ase_pins_clkout2[] = {GPIO14};
 | 
						|
 | 
						|
static const struct ltq_pin_group ase_grps[] = {
 | 
						|
	GRP_MUX("exin0", EXIN, ase_pins_exin0),
 | 
						|
	GRP_MUX("exin1", EXIN, ase_pins_exin1),
 | 
						|
	GRP_MUX("exin2", EXIN, ase_pins_exin2),
 | 
						|
	GRP_MUX("jtag", JTAG, ase_pins_jtag),
 | 
						|
	GRP_MUX("spi", SPI, ase_pins_spi), /* DEPRECATED */
 | 
						|
	GRP_MUX("spi_di", SPI, ase_pins_spi_di),
 | 
						|
	GRP_MUX("spi_do", SPI, ase_pins_spi_do),
 | 
						|
	GRP_MUX("spi_clk", SPI, ase_pins_spi_clk),
 | 
						|
	GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1),
 | 
						|
	GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2),
 | 
						|
	GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3),
 | 
						|
	GRP_MUX("asc", ASC, ase_pins_asc),
 | 
						|
	GRP_MUX("stp", STP, ase_pins_stp),
 | 
						|
	GRP_MUX("gpt1", GPT, ase_pins_gpt1),
 | 
						|
	GRP_MUX("gpt2", GPT, ase_pins_gpt2),
 | 
						|
	GRP_MUX("gpt3", GPT, ase_pins_gpt3),
 | 
						|
	GRP_MUX("clkout0", CGU, ase_pins_clkout0),
 | 
						|
	GRP_MUX("clkout1", CGU, ase_pins_clkout1),
 | 
						|
	GRP_MUX("clkout2", CGU, ase_pins_clkout2),
 | 
						|
	GRP_MUX("mdio", MDIO, ase_pins_mdio),
 | 
						|
	GRP_MUX("dfe led0", DFE, ase_pins_dfe_led0),
 | 
						|
	GRP_MUX("dfe led1", DFE, ase_pins_dfe_led1),
 | 
						|
	GRP_MUX("ephy led0", EPHY, ase_pins_ephy_led0),
 | 
						|
	GRP_MUX("ephy led1", EPHY, ase_pins_ephy_led1),
 | 
						|
	GRP_MUX("ephy led2", EPHY, ase_pins_ephy_led2),
 | 
						|
};
 | 
						|
 | 
						|
static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"};
 | 
						|
static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
 | 
						|
static const char * const ase_cgu_grps[] = {"clkout0", "clkout1",
 | 
						|
						"clkout2"};
 | 
						|
static const char * const ase_mdio_grps[] = {"mdio"};
 | 
						|
static const char * const ase_dfe_grps[] = {"dfe led0", "dfe led1"};
 | 
						|
static const char * const ase_ephy_grps[] = {"ephy led0", "ephy led1",
 | 
						|
						"ephy led2"};
 | 
						|
static const char * const ase_asc_grps[] = {"asc"};
 | 
						|
static const char * const ase_jtag_grps[] = {"jtag"};
 | 
						|
static const char * const ase_stp_grps[] = {"stp"};
 | 
						|
static const char * const ase_spi_grps[] = {"spi",  /* DEPRECATED */
 | 
						|
						"spi_di", "spi_do",
 | 
						|
						"spi_clk", "spi_cs1",
 | 
						|
						"spi_cs2", "spi_cs3"};
 | 
						|
 | 
						|
static const struct ltq_pmx_func ase_funcs[] = {
 | 
						|
	{"spi",		ARRAY_AND_SIZE(ase_spi_grps)},
 | 
						|
	{"asc",		ARRAY_AND_SIZE(ase_asc_grps)},
 | 
						|
	{"cgu",		ARRAY_AND_SIZE(ase_cgu_grps)},
 | 
						|
	{"jtag",	ARRAY_AND_SIZE(ase_jtag_grps)},
 | 
						|
	{"exin",	ARRAY_AND_SIZE(ase_exin_grps)},
 | 
						|
	{"stp",		ARRAY_AND_SIZE(ase_stp_grps)},
 | 
						|
	{"gpt",		ARRAY_AND_SIZE(ase_gpt_grps)},
 | 
						|
	{"mdio",	ARRAY_AND_SIZE(ase_mdio_grps)},
 | 
						|
	{"ephy",	ARRAY_AND_SIZE(ase_ephy_grps)},
 | 
						|
	{"dfe",		ARRAY_AND_SIZE(ase_dfe_grps)},
 | 
						|
};
 | 
						|
 | 
						|
/* ---------  danube related code --------- */
 | 
						|
#define DANUBE_MAX_PIN		32
 | 
						|
 | 
						|
static const struct ltq_mfp_pin danube_mfp[] = {
 | 
						|
	/*       pin    f0	f1	f2	f3   */
 | 
						|
	MFP_XWAY(GPIO0, GPIO,	EXIN,	SDIO,	TDM),
 | 
						|
	MFP_XWAY(GPIO1, GPIO,	EXIN,	CBUS,	MII),
 | 
						|
	MFP_XWAY(GPIO2, GPIO,	CGU,	EXIN,	MII),
 | 
						|
	MFP_XWAY(GPIO3, GPIO,	CGU,	SDIO,	PCI),
 | 
						|
	MFP_XWAY(GPIO4, GPIO,	STP,	DFE,	ASC),
 | 
						|
	MFP_XWAY(GPIO5, GPIO,	STP,	MII,	DFE),
 | 
						|
	MFP_XWAY(GPIO6, GPIO,	STP,	GPT,	ASC),
 | 
						|
	MFP_XWAY(GPIO7, GPIO,	CGU,	CBUS,	MII),
 | 
						|
	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	MII),
 | 
						|
	MFP_XWAY(GPIO9, GPIO,	ASC,	SPI,	MII),
 | 
						|
	MFP_XWAY(GPIO10, GPIO,	ASC,	SPI,	MII),
 | 
						|
	MFP_XWAY(GPIO11, GPIO,	ASC,	CBUS,	SPI),
 | 
						|
	MFP_XWAY(GPIO12, GPIO,	ASC,	CBUS,	MCD),
 | 
						|
	MFP_XWAY(GPIO13, GPIO,	EBU,	SPI,	MII),
 | 
						|
	MFP_XWAY(GPIO14, GPIO,	CGU,	CBUS,	MII),
 | 
						|
	MFP_XWAY(GPIO15, GPIO,	SPI,	SDIO,	JTAG),
 | 
						|
	MFP_XWAY(GPIO16, GPIO,	SPI,	SDIO,	JTAG),
 | 
						|
	MFP_XWAY(GPIO17, GPIO,	SPI,	SDIO,	JTAG),
 | 
						|
	MFP_XWAY(GPIO18, GPIO,	SPI,	SDIO,	JTAG),
 | 
						|
	MFP_XWAY(GPIO19, GPIO,	PCI,	SDIO,	MII),
 | 
						|
	MFP_XWAY(GPIO20, GPIO,	JTAG,	SDIO,	MII),
 | 
						|
	MFP_XWAY(GPIO21, GPIO,	PCI,	EBU,	GPT),
 | 
						|
	MFP_XWAY(GPIO22, GPIO,	SPI,	MCD,	MII),
 | 
						|
	MFP_XWAY(GPIO23, GPIO,	EBU,	PCI,	STP),
 | 
						|
	MFP_XWAY(GPIO24, GPIO,	EBU,	TDM,	PCI),
 | 
						|
	MFP_XWAY(GPIO25, GPIO,	TDM,	SDIO,	ASC),
 | 
						|
	MFP_XWAY(GPIO26, GPIO,	EBU,	TDM,	SDIO),
 | 
						|
	MFP_XWAY(GPIO27, GPIO,	TDM,	SDIO,	ASC),
 | 
						|
	MFP_XWAY(GPIO28, GPIO,	GPT,	MII,	SDIO),
 | 
						|
	MFP_XWAY(GPIO29, GPIO,	PCI,	CBUS,	MII),
 | 
						|
	MFP_XWAY(GPIO30, GPIO,	PCI,	CBUS,	MII),
 | 
						|
	MFP_XWAY(GPIO31, GPIO,	EBU,	PCI,	MII),
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned danube_exin_pin_map[] = {GPIO0, GPIO1, GPIO2};
 | 
						|
 | 
						|
static const unsigned danube_pins_exin0[] = {GPIO0};
 | 
						|
static const unsigned danube_pins_exin1[] = {GPIO1};
 | 
						|
static const unsigned danube_pins_exin2[] = {GPIO2};
 | 
						|
 | 
						|
static const unsigned danube_pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO18, GPIO20};
 | 
						|
static const unsigned danube_pins_asc0[] = {GPIO11, GPIO12};
 | 
						|
static const unsigned danube_pins_asc0_cts_rts[] = {GPIO9, GPIO10};
 | 
						|
static const unsigned danube_pins_stp[] = {GPIO4, GPIO5, GPIO6};
 | 
						|
static const unsigned danube_pins_nmi[] = {GPIO8};
 | 
						|
 | 
						|
static const unsigned danube_pins_dfe_led0[] = {GPIO4};
 | 
						|
static const unsigned danube_pins_dfe_led1[] = {GPIO5};
 | 
						|
 | 
						|
static const unsigned danube_pins_ebu_a24[] = {GPIO13};
 | 
						|
static const unsigned danube_pins_ebu_clk[] = {GPIO21};
 | 
						|
static const unsigned danube_pins_ebu_cs1[] = {GPIO23};
 | 
						|
static const unsigned danube_pins_ebu_a23[] = {GPIO24};
 | 
						|
static const unsigned danube_pins_ebu_wait[] = {GPIO26};
 | 
						|
static const unsigned danube_pins_ebu_a25[] = {GPIO31};
 | 
						|
 | 
						|
static const unsigned danube_pins_nand_ale[] = {GPIO13};
 | 
						|
static const unsigned danube_pins_nand_cs1[] = {GPIO23};
 | 
						|
static const unsigned danube_pins_nand_cle[] = {GPIO24};
 | 
						|
 | 
						|
static const unsigned danube_pins_spi[] = {GPIO16, GPIO17, GPIO18}; /* DEPRECATED */
 | 
						|
static const unsigned danube_pins_spi_di[] = {GPIO16};
 | 
						|
static const unsigned danube_pins_spi_do[] = {GPIO17};
 | 
						|
static const unsigned danube_pins_spi_clk[] = {GPIO18};
 | 
						|
static const unsigned danube_pins_spi_cs1[] = {GPIO15};
 | 
						|
static const unsigned danube_pins_spi_cs2[] = {GPIO21};
 | 
						|
static const unsigned danube_pins_spi_cs3[] = {GPIO13};
 | 
						|
static const unsigned danube_pins_spi_cs4[] = {GPIO10};
 | 
						|
static const unsigned danube_pins_spi_cs5[] = {GPIO9};
 | 
						|
static const unsigned danube_pins_spi_cs6[] = {GPIO11};
 | 
						|
 | 
						|
static const unsigned danube_pins_gpt1[] = {GPIO28};
 | 
						|
static const unsigned danube_pins_gpt2[] = {GPIO21};
 | 
						|
static const unsigned danube_pins_gpt3[] = {GPIO6};
 | 
						|
 | 
						|
static const unsigned danube_pins_clkout0[] = {GPIO8};
 | 
						|
static const unsigned danube_pins_clkout1[] = {GPIO7};
 | 
						|
static const unsigned danube_pins_clkout2[] = {GPIO3};
 | 
						|
static const unsigned danube_pins_clkout3[] = {GPIO2};
 | 
						|
 | 
						|
static const unsigned danube_pins_pci_gnt1[] = {GPIO30};
 | 
						|
static const unsigned danube_pins_pci_gnt2[] = {GPIO23};
 | 
						|
static const unsigned danube_pins_pci_gnt3[] = {GPIO19};
 | 
						|
static const unsigned danube_pins_pci_req1[] = {GPIO29};
 | 
						|
static const unsigned danube_pins_pci_req2[] = {GPIO31};
 | 
						|
static const unsigned danube_pins_pci_req3[] = {GPIO3};
 | 
						|
 | 
						|
static const struct ltq_pin_group danube_grps[] = {
 | 
						|
	GRP_MUX("exin0", EXIN, danube_pins_exin0),
 | 
						|
	GRP_MUX("exin1", EXIN, danube_pins_exin1),
 | 
						|
	GRP_MUX("exin2", EXIN, danube_pins_exin2),
 | 
						|
	GRP_MUX("jtag", JTAG, danube_pins_jtag),
 | 
						|
	GRP_MUX("ebu a23", EBU, danube_pins_ebu_a23),
 | 
						|
	GRP_MUX("ebu a24", EBU, danube_pins_ebu_a24),
 | 
						|
	GRP_MUX("ebu a25", EBU, danube_pins_ebu_a25),
 | 
						|
	GRP_MUX("ebu clk", EBU, danube_pins_ebu_clk),
 | 
						|
	GRP_MUX("ebu cs1", EBU, danube_pins_ebu_cs1),
 | 
						|
	GRP_MUX("ebu wait", EBU, danube_pins_ebu_wait),
 | 
						|
	GRP_MUX("nand ale", EBU, danube_pins_nand_ale),
 | 
						|
	GRP_MUX("nand cs1", EBU, danube_pins_nand_cs1),
 | 
						|
	GRP_MUX("nand cle", EBU, danube_pins_nand_cle),
 | 
						|
	GRP_MUX("spi", SPI, danube_pins_spi), /* DEPRECATED */
 | 
						|
	GRP_MUX("spi_di", SPI, danube_pins_spi_di),
 | 
						|
	GRP_MUX("spi_do", SPI, danube_pins_spi_do),
 | 
						|
	GRP_MUX("spi_clk", SPI, danube_pins_spi_clk),
 | 
						|
	GRP_MUX("spi_cs1", SPI, danube_pins_spi_cs1),
 | 
						|
	GRP_MUX("spi_cs2", SPI, danube_pins_spi_cs2),
 | 
						|
	GRP_MUX("spi_cs3", SPI, danube_pins_spi_cs3),
 | 
						|
	GRP_MUX("spi_cs4", SPI, danube_pins_spi_cs4),
 | 
						|
	GRP_MUX("spi_cs5", SPI, danube_pins_spi_cs5),
 | 
						|
	GRP_MUX("spi_cs6", SPI, danube_pins_spi_cs6),
 | 
						|
	GRP_MUX("asc0", ASC, danube_pins_asc0),
 | 
						|
	GRP_MUX("asc0 cts rts", ASC, danube_pins_asc0_cts_rts),
 | 
						|
	GRP_MUX("stp", STP, danube_pins_stp),
 | 
						|
	GRP_MUX("nmi", NMI, danube_pins_nmi),
 | 
						|
	GRP_MUX("gpt1", GPT, danube_pins_gpt1),
 | 
						|
	GRP_MUX("gpt2", GPT, danube_pins_gpt2),
 | 
						|
	GRP_MUX("gpt3", GPT, danube_pins_gpt3),
 | 
						|
	GRP_MUX("clkout0", CGU, danube_pins_clkout0),
 | 
						|
	GRP_MUX("clkout1", CGU, danube_pins_clkout1),
 | 
						|
	GRP_MUX("clkout2", CGU, danube_pins_clkout2),
 | 
						|
	GRP_MUX("clkout3", CGU, danube_pins_clkout3),
 | 
						|
	GRP_MUX("gnt1", PCI, danube_pins_pci_gnt1),
 | 
						|
	GRP_MUX("gnt2", PCI, danube_pins_pci_gnt2),
 | 
						|
	GRP_MUX("gnt3", PCI, danube_pins_pci_gnt3),
 | 
						|
	GRP_MUX("req1", PCI, danube_pins_pci_req1),
 | 
						|
	GRP_MUX("req2", PCI, danube_pins_pci_req2),
 | 
						|
	GRP_MUX("req3", PCI, danube_pins_pci_req3),
 | 
						|
	GRP_MUX("dfe led0", DFE, danube_pins_dfe_led0),
 | 
						|
	GRP_MUX("dfe led1", DFE, danube_pins_dfe_led1),
 | 
						|
};
 | 
						|
 | 
						|
static const char * const danube_pci_grps[] = {"gnt1", "gnt2",
 | 
						|
						"gnt3", "req1",
 | 
						|
						"req2", "req3"};
 | 
						|
static const char * const danube_spi_grps[] = {"spi", /* DEPRECATED */
 | 
						|
						"spi_di", "spi_do",
 | 
						|
						"spi_clk", "spi_cs1",
 | 
						|
						"spi_cs2", "spi_cs3",
 | 
						|
						"spi_cs4", "spi_cs5",
 | 
						|
						"spi_cs6"};
 | 
						|
static const char * const danube_cgu_grps[] = {"clkout0", "clkout1",
 | 
						|
						"clkout2", "clkout3"};
 | 
						|
static const char * const danube_ebu_grps[] = {"ebu a23", "ebu a24",
 | 
						|
						"ebu a25", "ebu cs1",
 | 
						|
						"ebu wait", "ebu clk",
 | 
						|
						"nand ale", "nand cs1",
 | 
						|
						"nand cle"};
 | 
						|
static const char * const danube_dfe_grps[] = {"dfe led0", "dfe led1"};
 | 
						|
static const char * const danube_exin_grps[] = {"exin0", "exin1", "exin2"};
 | 
						|
static const char * const danube_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
 | 
						|
static const char * const danube_asc_grps[] = {"asc0", "asc0 cts rts"};
 | 
						|
static const char * const danube_jtag_grps[] = {"jtag"};
 | 
						|
static const char * const danube_stp_grps[] = {"stp"};
 | 
						|
static const char * const danube_nmi_grps[] = {"nmi"};
 | 
						|
 | 
						|
static const struct ltq_pmx_func danube_funcs[] = {
 | 
						|
	{"spi",		ARRAY_AND_SIZE(danube_spi_grps)},
 | 
						|
	{"asc",		ARRAY_AND_SIZE(danube_asc_grps)},
 | 
						|
	{"cgu",		ARRAY_AND_SIZE(danube_cgu_grps)},
 | 
						|
	{"jtag",	ARRAY_AND_SIZE(danube_jtag_grps)},
 | 
						|
	{"exin",	ARRAY_AND_SIZE(danube_exin_grps)},
 | 
						|
	{"stp",		ARRAY_AND_SIZE(danube_stp_grps)},
 | 
						|
	{"gpt",		ARRAY_AND_SIZE(danube_gpt_grps)},
 | 
						|
	{"nmi",		ARRAY_AND_SIZE(danube_nmi_grps)},
 | 
						|
	{"pci",		ARRAY_AND_SIZE(danube_pci_grps)},
 | 
						|
	{"ebu",		ARRAY_AND_SIZE(danube_ebu_grps)},
 | 
						|
	{"dfe",		ARRAY_AND_SIZE(danube_dfe_grps)},
 | 
						|
};
 | 
						|
 | 
						|
/* ---------  xrx100 related code --------- */
 | 
						|
#define XRX100_MAX_PIN		56
 | 
						|
 | 
						|
static const struct ltq_mfp_pin xrx100_mfp[] = {
 | 
						|
	/*       pin    f0	f1	f2	f3   */
 | 
						|
	MFP_XWAY(GPIO0, GPIO,	EXIN,	SDIO,	TDM),
 | 
						|
	MFP_XWAY(GPIO1, GPIO,	EXIN,	CBUS,	SIN),
 | 
						|
	MFP_XWAY(GPIO2, GPIO,	CGU,	EXIN,	NONE),
 | 
						|
	MFP_XWAY(GPIO3, GPIO,	CGU,	SDIO,	PCI),
 | 
						|
	MFP_XWAY(GPIO4, GPIO,	STP,	DFE,	ASC),
 | 
						|
	MFP_XWAY(GPIO5, GPIO,	STP,	NONE,	DFE),
 | 
						|
	MFP_XWAY(GPIO6, GPIO,	STP,	GPT,	ASC),
 | 
						|
	MFP_XWAY(GPIO7, GPIO,	CGU,	CBUS,	NONE),
 | 
						|
	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	NONE),
 | 
						|
	MFP_XWAY(GPIO9, GPIO,	ASC,	SPI,	EXIN),
 | 
						|
	MFP_XWAY(GPIO10, GPIO,	ASC,	SPI,	EXIN),
 | 
						|
	MFP_XWAY(GPIO11, GPIO,	ASC,	CBUS,	SPI),
 | 
						|
	MFP_XWAY(GPIO12, GPIO,	ASC,	CBUS,	MCD),
 | 
						|
	MFP_XWAY(GPIO13, GPIO,	EBU,	SPI,	NONE),
 | 
						|
	MFP_XWAY(GPIO14, GPIO,	CGU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO15, GPIO,	SPI,	SDIO,	MCD),
 | 
						|
	MFP_XWAY(GPIO16, GPIO,	SPI,	SDIO,	NONE),
 | 
						|
	MFP_XWAY(GPIO17, GPIO,	SPI,	SDIO,	NONE),
 | 
						|
	MFP_XWAY(GPIO18, GPIO,	SPI,	SDIO,	NONE),
 | 
						|
	MFP_XWAY(GPIO19, GPIO,	PCI,	SDIO,	CGU),
 | 
						|
	MFP_XWAY(GPIO20, GPIO,	NONE,	SDIO,	EBU),
 | 
						|
	MFP_XWAY(GPIO21, GPIO,	PCI,	EBU,	GPT),
 | 
						|
	MFP_XWAY(GPIO22, GPIO,	SPI,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO23, GPIO,	EBU,	PCI,	STP),
 | 
						|
	MFP_XWAY(GPIO24, GPIO,	EBU,	TDM,	PCI),
 | 
						|
	MFP_XWAY(GPIO25, GPIO,	TDM,	SDIO,	ASC),
 | 
						|
	MFP_XWAY(GPIO26, GPIO,	EBU,	TDM,	SDIO),
 | 
						|
	MFP_XWAY(GPIO27, GPIO,	TDM,	SDIO,	ASC),
 | 
						|
	MFP_XWAY(GPIO28, GPIO,	GPT,	NONE,	SDIO),
 | 
						|
	MFP_XWAY(GPIO29, GPIO,	PCI,	CBUS,	NONE),
 | 
						|
	MFP_XWAY(GPIO30, GPIO,	PCI,	CBUS,	NONE),
 | 
						|
	MFP_XWAY(GPIO31, GPIO,	EBU,	PCI,	NONE),
 | 
						|
	MFP_XWAY(GPIO32, GPIO,	MII,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO33, GPIO,	MII,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO34, GPIO,	SIN,	SSI,	NONE),
 | 
						|
	MFP_XWAY(GPIO35, GPIO,	SIN,	SSI,	NONE),
 | 
						|
	MFP_XWAY(GPIO36, GPIO,	SIN,	SSI,	NONE),
 | 
						|
	MFP_XWAY(GPIO37, GPIO,	PCI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO38, GPIO,	PCI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO39, GPIO,	NONE,	EXIN,	NONE),
 | 
						|
	MFP_XWAY(GPIO40, GPIO,	MII,	TDM,	NONE),
 | 
						|
	MFP_XWAY(GPIO41, GPIO,	MII,	TDM,	NONE),
 | 
						|
	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO44, GPIO,	MII,	SIN,	NONE),
 | 
						|
	MFP_XWAY(GPIO45, GPIO,	MII,	NONE,	SIN),
 | 
						|
	MFP_XWAY(GPIO46, GPIO,	MII,	NONE,	EXIN),
 | 
						|
	MFP_XWAY(GPIO47, GPIO,	MII,	NONE,	SIN),
 | 
						|
	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO50, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO51, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO52, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO53, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO54, GPIO,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO55, GPIO,	NONE,	NONE,	NONE),
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned xrx100_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_exin0[] = {GPIO0};
 | 
						|
static const unsigned xrx100_pins_exin1[] = {GPIO1};
 | 
						|
static const unsigned xrx100_pins_exin2[] = {GPIO2};
 | 
						|
static const unsigned xrx100_pins_exin3[] = {GPIO39};
 | 
						|
static const unsigned xrx100_pins_exin4[] = {GPIO10};
 | 
						|
static const unsigned xrx100_pins_exin5[] = {GPIO9};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_asc0[] = {GPIO11, GPIO12};
 | 
						|
static const unsigned xrx100_pins_asc0_cts_rts[] = {GPIO9, GPIO10};
 | 
						|
static const unsigned xrx100_pins_stp[] = {GPIO4, GPIO5, GPIO6};
 | 
						|
static const unsigned xrx100_pins_nmi[] = {GPIO8};
 | 
						|
static const unsigned xrx100_pins_mdio[] = {GPIO42, GPIO43};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_dfe_led0[] = {GPIO4};
 | 
						|
static const unsigned xrx100_pins_dfe_led1[] = {GPIO5};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_ebu_a24[] = {GPIO13};
 | 
						|
static const unsigned xrx100_pins_ebu_clk[] = {GPIO21};
 | 
						|
static const unsigned xrx100_pins_ebu_cs1[] = {GPIO23};
 | 
						|
static const unsigned xrx100_pins_ebu_a23[] = {GPIO24};
 | 
						|
static const unsigned xrx100_pins_ebu_wait[] = {GPIO26};
 | 
						|
static const unsigned xrx100_pins_ebu_a25[] = {GPIO31};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_nand_ale[] = {GPIO13};
 | 
						|
static const unsigned xrx100_pins_nand_cs1[] = {GPIO23};
 | 
						|
static const unsigned xrx100_pins_nand_cle[] = {GPIO24};
 | 
						|
static const unsigned xrx100_pins_nand_rdy[] = {GPIO48};
 | 
						|
static const unsigned xrx100_pins_nand_rd[] = {GPIO49};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_spi_di[] = {GPIO16};
 | 
						|
static const unsigned xrx100_pins_spi_do[] = {GPIO17};
 | 
						|
static const unsigned xrx100_pins_spi_clk[] = {GPIO18};
 | 
						|
static const unsigned xrx100_pins_spi_cs1[] = {GPIO15};
 | 
						|
static const unsigned xrx100_pins_spi_cs2[] = {GPIO22};
 | 
						|
static const unsigned xrx100_pins_spi_cs3[] = {GPIO13};
 | 
						|
static const unsigned xrx100_pins_spi_cs4[] = {GPIO10};
 | 
						|
static const unsigned xrx100_pins_spi_cs5[] = {GPIO9};
 | 
						|
static const unsigned xrx100_pins_spi_cs6[] = {GPIO11};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_gpt1[] = {GPIO28};
 | 
						|
static const unsigned xrx100_pins_gpt2[] = {GPIO21};
 | 
						|
static const unsigned xrx100_pins_gpt3[] = {GPIO6};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_clkout0[] = {GPIO8};
 | 
						|
static const unsigned xrx100_pins_clkout1[] = {GPIO7};
 | 
						|
static const unsigned xrx100_pins_clkout2[] = {GPIO3};
 | 
						|
static const unsigned xrx100_pins_clkout3[] = {GPIO2};
 | 
						|
 | 
						|
static const unsigned xrx100_pins_pci_gnt1[] = {GPIO30};
 | 
						|
static const unsigned xrx100_pins_pci_gnt2[] = {GPIO23};
 | 
						|
static const unsigned xrx100_pins_pci_gnt3[] = {GPIO19};
 | 
						|
static const unsigned xrx100_pins_pci_gnt4[] = {GPIO38};
 | 
						|
static const unsigned xrx100_pins_pci_req1[] = {GPIO29};
 | 
						|
static const unsigned xrx100_pins_pci_req2[] = {GPIO31};
 | 
						|
static const unsigned xrx100_pins_pci_req3[] = {GPIO3};
 | 
						|
static const unsigned xrx100_pins_pci_req4[] = {GPIO37};
 | 
						|
 | 
						|
static const struct ltq_pin_group xrx100_grps[] = {
 | 
						|
	GRP_MUX("exin0", EXIN, xrx100_pins_exin0),
 | 
						|
	GRP_MUX("exin1", EXIN, xrx100_pins_exin1),
 | 
						|
	GRP_MUX("exin2", EXIN, xrx100_pins_exin2),
 | 
						|
	GRP_MUX("exin3", EXIN, xrx100_pins_exin3),
 | 
						|
	GRP_MUX("exin4", EXIN, xrx100_pins_exin4),
 | 
						|
	GRP_MUX("exin5", EXIN, xrx100_pins_exin5),
 | 
						|
	GRP_MUX("ebu a23", EBU, xrx100_pins_ebu_a23),
 | 
						|
	GRP_MUX("ebu a24", EBU, xrx100_pins_ebu_a24),
 | 
						|
	GRP_MUX("ebu a25", EBU, xrx100_pins_ebu_a25),
 | 
						|
	GRP_MUX("ebu clk", EBU, xrx100_pins_ebu_clk),
 | 
						|
	GRP_MUX("ebu cs1", EBU, xrx100_pins_ebu_cs1),
 | 
						|
	GRP_MUX("ebu wait", EBU, xrx100_pins_ebu_wait),
 | 
						|
	GRP_MUX("nand ale", EBU, xrx100_pins_nand_ale),
 | 
						|
	GRP_MUX("nand cs1", EBU, xrx100_pins_nand_cs1),
 | 
						|
	GRP_MUX("nand cle", EBU, xrx100_pins_nand_cle),
 | 
						|
	GRP_MUX("nand rdy", EBU, xrx100_pins_nand_rdy),
 | 
						|
	GRP_MUX("nand rd", EBU, xrx100_pins_nand_rd),
 | 
						|
	GRP_MUX("spi_di", SPI, xrx100_pins_spi_di),
 | 
						|
	GRP_MUX("spi_do", SPI, xrx100_pins_spi_do),
 | 
						|
	GRP_MUX("spi_clk", SPI, xrx100_pins_spi_clk),
 | 
						|
	GRP_MUX("spi_cs1", SPI, xrx100_pins_spi_cs1),
 | 
						|
	GRP_MUX("spi_cs2", SPI, xrx100_pins_spi_cs2),
 | 
						|
	GRP_MUX("spi_cs3", SPI, xrx100_pins_spi_cs3),
 | 
						|
	GRP_MUX("spi_cs4", SPI, xrx100_pins_spi_cs4),
 | 
						|
	GRP_MUX("spi_cs5", SPI, xrx100_pins_spi_cs5),
 | 
						|
	GRP_MUX("spi_cs6", SPI, xrx100_pins_spi_cs6),
 | 
						|
	GRP_MUX("asc0", ASC, xrx100_pins_asc0),
 | 
						|
	GRP_MUX("asc0 cts rts", ASC, xrx100_pins_asc0_cts_rts),
 | 
						|
	GRP_MUX("stp", STP, xrx100_pins_stp),
 | 
						|
	GRP_MUX("nmi", NMI, xrx100_pins_nmi),
 | 
						|
	GRP_MUX("gpt1", GPT, xrx100_pins_gpt1),
 | 
						|
	GRP_MUX("gpt2", GPT, xrx100_pins_gpt2),
 | 
						|
	GRP_MUX("gpt3", GPT, xrx100_pins_gpt3),
 | 
						|
	GRP_MUX("clkout0", CGU, xrx100_pins_clkout0),
 | 
						|
	GRP_MUX("clkout1", CGU, xrx100_pins_clkout1),
 | 
						|
	GRP_MUX("clkout2", CGU, xrx100_pins_clkout2),
 | 
						|
	GRP_MUX("clkout3", CGU, xrx100_pins_clkout3),
 | 
						|
	GRP_MUX("gnt1", PCI, xrx100_pins_pci_gnt1),
 | 
						|
	GRP_MUX("gnt2", PCI, xrx100_pins_pci_gnt2),
 | 
						|
	GRP_MUX("gnt3", PCI, xrx100_pins_pci_gnt3),
 | 
						|
	GRP_MUX("gnt4", PCI, xrx100_pins_pci_gnt4),
 | 
						|
	GRP_MUX("req1", PCI, xrx100_pins_pci_req1),
 | 
						|
	GRP_MUX("req2", PCI, xrx100_pins_pci_req2),
 | 
						|
	GRP_MUX("req3", PCI, xrx100_pins_pci_req3),
 | 
						|
	GRP_MUX("req4", PCI, xrx100_pins_pci_req4),
 | 
						|
	GRP_MUX("mdio", MDIO, xrx100_pins_mdio),
 | 
						|
	GRP_MUX("dfe led0", DFE, xrx100_pins_dfe_led0),
 | 
						|
	GRP_MUX("dfe led1", DFE, xrx100_pins_dfe_led1),
 | 
						|
};
 | 
						|
 | 
						|
static const char * const xrx100_pci_grps[] = {"gnt1", "gnt2",
 | 
						|
						"gnt3", "gnt4",
 | 
						|
						"req1", "req2",
 | 
						|
						"req3", "req4"};
 | 
						|
static const char * const xrx100_spi_grps[] = {"spi_di", "spi_do",
 | 
						|
						"spi_clk", "spi_cs1",
 | 
						|
						"spi_cs2", "spi_cs3",
 | 
						|
						"spi_cs4", "spi_cs5",
 | 
						|
						"spi_cs6"};
 | 
						|
static const char * const xrx100_cgu_grps[] = {"clkout0", "clkout1",
 | 
						|
						"clkout2", "clkout3"};
 | 
						|
static const char * const xrx100_ebu_grps[] = {"ebu a23", "ebu a24",
 | 
						|
						"ebu a25", "ebu cs1",
 | 
						|
						"ebu wait", "ebu clk",
 | 
						|
						"nand ale", "nand cs1",
 | 
						|
						"nand cle", "nand rdy",
 | 
						|
						"nand rd"};
 | 
						|
static const char * const xrx100_exin_grps[] = {"exin0", "exin1", "exin2",
 | 
						|
						"exin3", "exin4", "exin5"};
 | 
						|
static const char * const xrx100_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
 | 
						|
static const char * const xrx100_asc_grps[] = {"asc0", "asc0 cts rts"};
 | 
						|
static const char * const xrx100_stp_grps[] = {"stp"};
 | 
						|
static const char * const xrx100_nmi_grps[] = {"nmi"};
 | 
						|
static const char * const xrx100_mdio_grps[] = {"mdio"};
 | 
						|
static const char * const xrx100_dfe_grps[] = {"dfe led0", "dfe led1"};
 | 
						|
 | 
						|
static const struct ltq_pmx_func xrx100_funcs[] = {
 | 
						|
	{"spi",		ARRAY_AND_SIZE(xrx100_spi_grps)},
 | 
						|
	{"asc",		ARRAY_AND_SIZE(xrx100_asc_grps)},
 | 
						|
	{"cgu",		ARRAY_AND_SIZE(xrx100_cgu_grps)},
 | 
						|
	{"exin",	ARRAY_AND_SIZE(xrx100_exin_grps)},
 | 
						|
	{"stp",		ARRAY_AND_SIZE(xrx100_stp_grps)},
 | 
						|
	{"gpt",		ARRAY_AND_SIZE(xrx100_gpt_grps)},
 | 
						|
	{"nmi",		ARRAY_AND_SIZE(xrx100_nmi_grps)},
 | 
						|
	{"pci",		ARRAY_AND_SIZE(xrx100_pci_grps)},
 | 
						|
	{"ebu",		ARRAY_AND_SIZE(xrx100_ebu_grps)},
 | 
						|
	{"mdio",	ARRAY_AND_SIZE(xrx100_mdio_grps)},
 | 
						|
	{"dfe",		ARRAY_AND_SIZE(xrx100_dfe_grps)},
 | 
						|
};
 | 
						|
 | 
						|
/* ---------  xrx200 related code --------- */
 | 
						|
#define XRX200_MAX_PIN		50
 | 
						|
 | 
						|
static const struct ltq_mfp_pin xrx200_mfp[] = {
 | 
						|
	/*       pin    f0	f1	f2	f3   */
 | 
						|
	MFP_XWAY(GPIO0, GPIO,	EXIN,	SDIO,	TDM),
 | 
						|
	MFP_XWAY(GPIO1, GPIO,	EXIN,	CBUS,	SIN),
 | 
						|
	MFP_XWAY(GPIO2, GPIO,	CGU,	EXIN,	GPHY),
 | 
						|
	MFP_XWAY(GPIO3, GPIO,	CGU,	SDIO,	PCI),
 | 
						|
	MFP_XWAY(GPIO4, GPIO,	STP,	DFE,	USIF),
 | 
						|
	MFP_XWAY(GPIO5, GPIO,	STP,	GPHY,	DFE),
 | 
						|
	MFP_XWAY(GPIO6, GPIO,	STP,	GPT,	USIF),
 | 
						|
	MFP_XWAY(GPIO7, GPIO,	CGU,	CBUS,	GPHY),
 | 
						|
	MFP_XWAY(GPIO8, GPIO,	CGU,	NMI,	NONE),
 | 
						|
	MFP_XWAY(GPIO9, GPIO,	USIF,	SPI,	EXIN),
 | 
						|
	MFP_XWAY(GPIO10, GPIO,	USIF,	SPI,	EXIN),
 | 
						|
	MFP_XWAY(GPIO11, GPIO,	USIF,	CBUS,	SPI),
 | 
						|
	MFP_XWAY(GPIO12, GPIO,	USIF,	CBUS,	MCD),
 | 
						|
	MFP_XWAY(GPIO13, GPIO,	EBU,	SPI,	NONE),
 | 
						|
	MFP_XWAY(GPIO14, GPIO,	CGU,	CBUS,	USIF),
 | 
						|
	MFP_XWAY(GPIO15, GPIO,	SPI,	SDIO,	MCD),
 | 
						|
	MFP_XWAY(GPIO16, GPIO,	SPI,	SDIO,	NONE),
 | 
						|
	MFP_XWAY(GPIO17, GPIO,	SPI,	SDIO,	NONE),
 | 
						|
	MFP_XWAY(GPIO18, GPIO,	SPI,	SDIO,	NONE),
 | 
						|
	MFP_XWAY(GPIO19, GPIO,	PCI,	SDIO,	CGU),
 | 
						|
	MFP_XWAY(GPIO20, GPIO,	NONE,	SDIO,	EBU),
 | 
						|
	MFP_XWAY(GPIO21, GPIO,	PCI,	EBU,	GPT),
 | 
						|
	MFP_XWAY(GPIO22, GPIO,	SPI,	CGU,	EBU),
 | 
						|
	MFP_XWAY(GPIO23, GPIO,	EBU,	PCI,	STP),
 | 
						|
	MFP_XWAY(GPIO24, GPIO,	EBU,	TDM,	PCI),
 | 
						|
	MFP_XWAY(GPIO25, GPIO,	TDM,	SDIO,	USIF),
 | 
						|
	MFP_XWAY(GPIO26, GPIO,	EBU,	TDM,	SDIO),
 | 
						|
	MFP_XWAY(GPIO27, GPIO,	TDM,	SDIO,	USIF),
 | 
						|
	MFP_XWAY(GPIO28, GPIO,	GPT,	PCI,	SDIO),
 | 
						|
	MFP_XWAY(GPIO29, GPIO,	PCI,	CBUS,	EXIN),
 | 
						|
	MFP_XWAY(GPIO30, GPIO,	PCI,	CBUS,	NONE),
 | 
						|
	MFP_XWAY(GPIO31, GPIO,	EBU,	PCI,	NONE),
 | 
						|
	MFP_XWAY(GPIO32, GPIO,	MII,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO33, GPIO,	MII,	NONE,	EBU),
 | 
						|
	MFP_XWAY(GPIO34, GPIO,	SIN,	SSI,	NONE),
 | 
						|
	MFP_XWAY(GPIO35, GPIO,	SIN,	SSI,	NONE),
 | 
						|
	MFP_XWAY(GPIO36, GPIO,	SIN,	SSI,	EXIN),
 | 
						|
	MFP_XWAY(GPIO37, GPIO,	USIF,	NONE,	PCI),
 | 
						|
	MFP_XWAY(GPIO38, GPIO,	PCI,	USIF,	NONE),
 | 
						|
	MFP_XWAY(GPIO39, GPIO,	USIF,	EXIN,	NONE),
 | 
						|
	MFP_XWAY(GPIO40, GPIO,	MII,	TDM,	NONE),
 | 
						|
	MFP_XWAY(GPIO41, GPIO,	MII,	TDM,	NONE),
 | 
						|
	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO44, GPIO,	MII,	SIN,	GPHY),
 | 
						|
	MFP_XWAY(GPIO45, GPIO,	MII,	GPHY,	SIN),
 | 
						|
	MFP_XWAY(GPIO46, GPIO,	MII,	NONE,	EXIN),
 | 
						|
	MFP_XWAY(GPIO47, GPIO,	MII,	GPHY,	SIN),
 | 
						|
	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned xrx200_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO10, GPIO9};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_exin0[] = {GPIO0};
 | 
						|
static const unsigned xrx200_pins_exin1[] = {GPIO1};
 | 
						|
static const unsigned xrx200_pins_exin2[] = {GPIO2};
 | 
						|
static const unsigned xrx200_pins_exin3[] = {GPIO39};
 | 
						|
static const unsigned xrx200_pins_exin4[] = {GPIO10};
 | 
						|
static const unsigned xrx200_pins_exin5[] = {GPIO9};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_usif_uart_rx[] = {GPIO11};
 | 
						|
static const unsigned xrx200_pins_usif_uart_tx[] = {GPIO12};
 | 
						|
static const unsigned xrx200_pins_usif_uart_rts[] = {GPIO9};
 | 
						|
static const unsigned xrx200_pins_usif_uart_cts[] = {GPIO10};
 | 
						|
static const unsigned xrx200_pins_usif_uart_dtr[] = {GPIO4};
 | 
						|
static const unsigned xrx200_pins_usif_uart_dsr[] = {GPIO6};
 | 
						|
static const unsigned xrx200_pins_usif_uart_dcd[] = {GPIO25};
 | 
						|
static const unsigned xrx200_pins_usif_uart_ri[] = {GPIO27};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_usif_spi_di[] = {GPIO11};
 | 
						|
static const unsigned xrx200_pins_usif_spi_do[] = {GPIO12};
 | 
						|
static const unsigned xrx200_pins_usif_spi_clk[] = {GPIO38};
 | 
						|
static const unsigned xrx200_pins_usif_spi_cs0[] = {GPIO37};
 | 
						|
static const unsigned xrx200_pins_usif_spi_cs1[] = {GPIO39};
 | 
						|
static const unsigned xrx200_pins_usif_spi_cs2[] = {GPIO14};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_stp[] = {GPIO4, GPIO5, GPIO6};
 | 
						|
static const unsigned xrx200_pins_nmi[] = {GPIO8};
 | 
						|
static const unsigned xrx200_pins_mdio[] = {GPIO42, GPIO43};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_dfe_led0[] = {GPIO4};
 | 
						|
static const unsigned xrx200_pins_dfe_led1[] = {GPIO5};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_gphy0_led0[] = {GPIO5};
 | 
						|
static const unsigned xrx200_pins_gphy0_led1[] = {GPIO7};
 | 
						|
static const unsigned xrx200_pins_gphy0_led2[] = {GPIO2};
 | 
						|
static const unsigned xrx200_pins_gphy1_led0[] = {GPIO44};
 | 
						|
static const unsigned xrx200_pins_gphy1_led1[] = {GPIO45};
 | 
						|
static const unsigned xrx200_pins_gphy1_led2[] = {GPIO47};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_ebu_a24[] = {GPIO13};
 | 
						|
static const unsigned xrx200_pins_ebu_clk[] = {GPIO21};
 | 
						|
static const unsigned xrx200_pins_ebu_cs1[] = {GPIO23};
 | 
						|
static const unsigned xrx200_pins_ebu_a23[] = {GPIO24};
 | 
						|
static const unsigned xrx200_pins_ebu_wait[] = {GPIO26};
 | 
						|
static const unsigned xrx200_pins_ebu_a25[] = {GPIO31};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_nand_ale[] = {GPIO13};
 | 
						|
static const unsigned xrx200_pins_nand_cs1[] = {GPIO23};
 | 
						|
static const unsigned xrx200_pins_nand_cle[] = {GPIO24};
 | 
						|
static const unsigned xrx200_pins_nand_rdy[] = {GPIO48};
 | 
						|
static const unsigned xrx200_pins_nand_rd[] = {GPIO49};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_spi_di[] = {GPIO16};
 | 
						|
static const unsigned xrx200_pins_spi_do[] = {GPIO17};
 | 
						|
static const unsigned xrx200_pins_spi_clk[] = {GPIO18};
 | 
						|
static const unsigned xrx200_pins_spi_cs1[] = {GPIO15};
 | 
						|
static const unsigned xrx200_pins_spi_cs2[] = {GPIO22};
 | 
						|
static const unsigned xrx200_pins_spi_cs3[] = {GPIO13};
 | 
						|
static const unsigned xrx200_pins_spi_cs4[] = {GPIO10};
 | 
						|
static const unsigned xrx200_pins_spi_cs5[] = {GPIO9};
 | 
						|
static const unsigned xrx200_pins_spi_cs6[] = {GPIO11};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_gpt1[] = {GPIO28};
 | 
						|
static const unsigned xrx200_pins_gpt2[] = {GPIO21};
 | 
						|
static const unsigned xrx200_pins_gpt3[] = {GPIO6};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_clkout0[] = {GPIO8};
 | 
						|
static const unsigned xrx200_pins_clkout1[] = {GPIO7};
 | 
						|
static const unsigned xrx200_pins_clkout2[] = {GPIO3};
 | 
						|
static const unsigned xrx200_pins_clkout3[] = {GPIO2};
 | 
						|
 | 
						|
static const unsigned xrx200_pins_pci_gnt1[] = {GPIO28};
 | 
						|
static const unsigned xrx200_pins_pci_gnt2[] = {GPIO23};
 | 
						|
static const unsigned xrx200_pins_pci_gnt3[] = {GPIO19};
 | 
						|
static const unsigned xrx200_pins_pci_gnt4[] = {GPIO38};
 | 
						|
static const unsigned xrx200_pins_pci_req1[] = {GPIO29};
 | 
						|
static const unsigned xrx200_pins_pci_req2[] = {GPIO31};
 | 
						|
static const unsigned xrx200_pins_pci_req3[] = {GPIO3};
 | 
						|
static const unsigned xrx200_pins_pci_req4[] = {GPIO37};
 | 
						|
 | 
						|
static const struct ltq_pin_group xrx200_grps[] = {
 | 
						|
	GRP_MUX("exin0", EXIN, xrx200_pins_exin0),
 | 
						|
	GRP_MUX("exin1", EXIN, xrx200_pins_exin1),
 | 
						|
	GRP_MUX("exin2", EXIN, xrx200_pins_exin2),
 | 
						|
	GRP_MUX("exin3", EXIN, xrx200_pins_exin3),
 | 
						|
	GRP_MUX("exin4", EXIN, xrx200_pins_exin4),
 | 
						|
	GRP_MUX("exin5", EXIN, xrx200_pins_exin5),
 | 
						|
	GRP_MUX("ebu a23", EBU, xrx200_pins_ebu_a23),
 | 
						|
	GRP_MUX("ebu a24", EBU, xrx200_pins_ebu_a24),
 | 
						|
	GRP_MUX("ebu a25", EBU, xrx200_pins_ebu_a25),
 | 
						|
	GRP_MUX("ebu clk", EBU, xrx200_pins_ebu_clk),
 | 
						|
	GRP_MUX("ebu cs1", EBU, xrx200_pins_ebu_cs1),
 | 
						|
	GRP_MUX("ebu wait", EBU, xrx200_pins_ebu_wait),
 | 
						|
	GRP_MUX("nand ale", EBU, xrx200_pins_nand_ale),
 | 
						|
	GRP_MUX("nand cs1", EBU, xrx200_pins_nand_cs1),
 | 
						|
	GRP_MUX("nand cle", EBU, xrx200_pins_nand_cle),
 | 
						|
	GRP_MUX("nand rdy", EBU, xrx200_pins_nand_rdy),
 | 
						|
	GRP_MUX("nand rd", EBU, xrx200_pins_nand_rd),
 | 
						|
	GRP_MUX("spi_di", SPI, xrx200_pins_spi_di),
 | 
						|
	GRP_MUX("spi_do", SPI, xrx200_pins_spi_do),
 | 
						|
	GRP_MUX("spi_clk", SPI, xrx200_pins_spi_clk),
 | 
						|
	GRP_MUX("spi_cs1", SPI, xrx200_pins_spi_cs1),
 | 
						|
	GRP_MUX("spi_cs2", SPI, xrx200_pins_spi_cs2),
 | 
						|
	GRP_MUX("spi_cs3", SPI, xrx200_pins_spi_cs3),
 | 
						|
	GRP_MUX("spi_cs4", SPI, xrx200_pins_spi_cs4),
 | 
						|
	GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5),
 | 
						|
	GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6),
 | 
						|
	GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx),
 | 
						|
	GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx),
 | 
						|
	GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts),
 | 
						|
	GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts),
 | 
						|
	GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr),
 | 
						|
	GRP_MUX("usif uart_dsr", USIF, xrx200_pins_usif_uart_dsr),
 | 
						|
	GRP_MUX("usif uart_dcd", USIF, xrx200_pins_usif_uart_dcd),
 | 
						|
	GRP_MUX("usif uart_ri", USIF, xrx200_pins_usif_uart_ri),
 | 
						|
	GRP_MUX("usif spi_di", USIF, xrx200_pins_usif_spi_di),
 | 
						|
	GRP_MUX("usif spi_do", USIF, xrx200_pins_usif_spi_do),
 | 
						|
	GRP_MUX("usif spi_clk", USIF, xrx200_pins_usif_spi_clk),
 | 
						|
	GRP_MUX("usif spi_cs0", USIF, xrx200_pins_usif_spi_cs0),
 | 
						|
	GRP_MUX("usif spi_cs1", USIF, xrx200_pins_usif_spi_cs1),
 | 
						|
	GRP_MUX("usif spi_cs2", USIF, xrx200_pins_usif_spi_cs2),
 | 
						|
	GRP_MUX("stp", STP, xrx200_pins_stp),
 | 
						|
	GRP_MUX("nmi", NMI, xrx200_pins_nmi),
 | 
						|
	GRP_MUX("gpt1", GPT, xrx200_pins_gpt1),
 | 
						|
	GRP_MUX("gpt2", GPT, xrx200_pins_gpt2),
 | 
						|
	GRP_MUX("gpt3", GPT, xrx200_pins_gpt3),
 | 
						|
	GRP_MUX("clkout0", CGU, xrx200_pins_clkout0),
 | 
						|
	GRP_MUX("clkout1", CGU, xrx200_pins_clkout1),
 | 
						|
	GRP_MUX("clkout2", CGU, xrx200_pins_clkout2),
 | 
						|
	GRP_MUX("clkout3", CGU, xrx200_pins_clkout3),
 | 
						|
	GRP_MUX("gnt1", PCI, xrx200_pins_pci_gnt1),
 | 
						|
	GRP_MUX("gnt2", PCI, xrx200_pins_pci_gnt2),
 | 
						|
	GRP_MUX("gnt3", PCI, xrx200_pins_pci_gnt3),
 | 
						|
	GRP_MUX("gnt4", PCI, xrx200_pins_pci_gnt4),
 | 
						|
	GRP_MUX("req1", PCI, xrx200_pins_pci_req1),
 | 
						|
	GRP_MUX("req2", PCI, xrx200_pins_pci_req2),
 | 
						|
	GRP_MUX("req3", PCI, xrx200_pins_pci_req3),
 | 
						|
	GRP_MUX("req4", PCI, xrx200_pins_pci_req4),
 | 
						|
	GRP_MUX("mdio", MDIO, xrx200_pins_mdio),
 | 
						|
	GRP_MUX("dfe led0", DFE, xrx200_pins_dfe_led0),
 | 
						|
	GRP_MUX("dfe led1", DFE, xrx200_pins_dfe_led1),
 | 
						|
	GRP_MUX("gphy0 led0", GPHY, xrx200_pins_gphy0_led0),
 | 
						|
	GRP_MUX("gphy0 led1", GPHY, xrx200_pins_gphy0_led1),
 | 
						|
	GRP_MUX("gphy0 led2", GPHY, xrx200_pins_gphy0_led2),
 | 
						|
	GRP_MUX("gphy1 led0", GPHY, xrx200_pins_gphy1_led0),
 | 
						|
	GRP_MUX("gphy1 led1", GPHY, xrx200_pins_gphy1_led1),
 | 
						|
	GRP_MUX("gphy1 led2", GPHY, xrx200_pins_gphy1_led2),
 | 
						|
};
 | 
						|
 | 
						|
static const char * const xrx200_pci_grps[] = {"gnt1", "gnt2",
 | 
						|
						"gnt3", "gnt4",
 | 
						|
						"req1", "req2",
 | 
						|
						"req3", "req4"};
 | 
						|
static const char * const xrx200_spi_grps[] = {"spi_di", "spi_do",
 | 
						|
						"spi_clk", "spi_cs1",
 | 
						|
						"spi_cs2", "spi_cs3",
 | 
						|
						"spi_cs4", "spi_cs5",
 | 
						|
						"spi_cs6"};
 | 
						|
static const char * const xrx200_cgu_grps[] = {"clkout0", "clkout1",
 | 
						|
						"clkout2", "clkout3"};
 | 
						|
static const char * const xrx200_ebu_grps[] = {"ebu a23", "ebu a24",
 | 
						|
						"ebu a25", "ebu cs1",
 | 
						|
						"ebu wait", "ebu clk",
 | 
						|
						"nand ale", "nand cs1",
 | 
						|
						"nand cle", "nand rdy",
 | 
						|
						"nand rd"};
 | 
						|
static const char * const xrx200_exin_grps[] = {"exin0", "exin1", "exin2",
 | 
						|
						"exin3", "exin4", "exin5"};
 | 
						|
static const char * const xrx200_gpt_grps[] = {"gpt1", "gpt2", "gpt3"};
 | 
						|
static const char * const xrx200_usif_grps[] = {"usif uart_rx", "usif uart_tx",
 | 
						|
						"usif uart_rts", "usif uart_cts",
 | 
						|
						"usif uart_dtr", "usif uart_dsr",
 | 
						|
						"usif uart_dcd", "usif uart_ri",
 | 
						|
						"usif spi_di", "usif spi_do",
 | 
						|
						"usif spi_clk", "usif spi_cs0",
 | 
						|
						"usif spi_cs1", "usif spi_cs2"};
 | 
						|
static const char * const xrx200_stp_grps[] = {"stp"};
 | 
						|
static const char * const xrx200_nmi_grps[] = {"nmi"};
 | 
						|
static const char * const xrx200_mdio_grps[] = {"mdio"};
 | 
						|
static const char * const xrx200_dfe_grps[] = {"dfe led0", "dfe led1"};
 | 
						|
static const char * const xrx200_gphy_grps[] = {"gphy0 led0", "gphy0 led1",
 | 
						|
						"gphy0 led2", "gphy1 led0",
 | 
						|
						"gphy1 led1", "gphy1 led2"};
 | 
						|
 | 
						|
static const struct ltq_pmx_func xrx200_funcs[] = {
 | 
						|
	{"spi",		ARRAY_AND_SIZE(xrx200_spi_grps)},
 | 
						|
	{"usif",	ARRAY_AND_SIZE(xrx200_usif_grps)},
 | 
						|
	{"cgu",		ARRAY_AND_SIZE(xrx200_cgu_grps)},
 | 
						|
	{"exin",	ARRAY_AND_SIZE(xrx200_exin_grps)},
 | 
						|
	{"stp",		ARRAY_AND_SIZE(xrx200_stp_grps)},
 | 
						|
	{"gpt",		ARRAY_AND_SIZE(xrx200_gpt_grps)},
 | 
						|
	{"nmi",		ARRAY_AND_SIZE(xrx200_nmi_grps)},
 | 
						|
	{"pci",		ARRAY_AND_SIZE(xrx200_pci_grps)},
 | 
						|
	{"ebu",		ARRAY_AND_SIZE(xrx200_ebu_grps)},
 | 
						|
	{"mdio",	ARRAY_AND_SIZE(xrx200_mdio_grps)},
 | 
						|
	{"dfe",		ARRAY_AND_SIZE(xrx200_dfe_grps)},
 | 
						|
	{"gphy",	ARRAY_AND_SIZE(xrx200_gphy_grps)},
 | 
						|
};
 | 
						|
 | 
						|
/* ---------  xrx300 related code --------- */
 | 
						|
#define XRX300_MAX_PIN		64
 | 
						|
 | 
						|
static const struct ltq_mfp_pin xrx300_mfp[] = {
 | 
						|
	/*       pin    f0	f1	f2	f3   */
 | 
						|
	MFP_XWAY(GPIO0, GPIO,	EXIN,	EPHY,	NONE),
 | 
						|
	MFP_XWAY(GPIO1, GPIO,	NONE,	EXIN,	NONE),
 | 
						|
	MFP_XWAY(GPIO2, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO3, GPIO,	CGU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO4, GPIO,	STP,	DFE,	NONE),
 | 
						|
	MFP_XWAY(GPIO5, GPIO,	STP,	EPHY,	DFE),
 | 
						|
	MFP_XWAY(GPIO6, GPIO,	STP,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO7, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO8, GPIO,	CGU,	GPHY,	EPHY),
 | 
						|
	MFP_XWAY(GPIO9, GPIO,	WIFI,	NONE,	EXIN),
 | 
						|
	MFP_XWAY(GPIO10, GPIO,	USIF,	SPI,	EXIN),
 | 
						|
	MFP_XWAY(GPIO11, GPIO,	USIF,	WIFI,	SPI),
 | 
						|
	MFP_XWAY(GPIO12, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO13, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO14, GPIO,	CGU,	USIF,	EPHY),
 | 
						|
	MFP_XWAY(GPIO15, GPIO,	SPI,	NONE,	MCD),
 | 
						|
	MFP_XWAY(GPIO16, GPIO,	SPI,	EXIN,	NONE),
 | 
						|
	MFP_XWAY(GPIO17, GPIO,	SPI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO18, GPIO,	SPI,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO19, GPIO,	USIF,	NONE,	EPHY),
 | 
						|
	MFP_XWAY(GPIO20, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO21, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO22, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO23, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO24, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO25, GPIO,	TDM,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO26, GPIO,	TDM,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO27, GPIO,	TDM,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO28, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO29, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO30, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO31, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO32, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO33, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO34, GPIO,	NONE,	SSI,	NONE),
 | 
						|
	MFP_XWAY(GPIO35, GPIO,	NONE,	SSI,	NONE),
 | 
						|
	MFP_XWAY(GPIO36, GPIO,	NONE,	SSI,	NONE),
 | 
						|
	MFP_XWAY(GPIO37, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO38, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO39, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO40, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO41, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO42, GPIO,	MDIO,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO43, GPIO,	MDIO,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO44, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO45, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO46, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO47, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO48, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO49, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO50, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO51, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO52, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO53, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO54, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO55, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO56, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO57, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO58, GPIO,	EBU,	TDM,	NONE),
 | 
						|
	MFP_XWAY(GPIO59, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO60, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO61, GPIO,	EBU,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO62, NONE,	NONE,	NONE,	NONE),
 | 
						|
	MFP_XWAY(GPIO63, NONE,	NONE,	NONE,	NONE),
 | 
						|
};
 | 
						|
 | 
						|
static const unsigned xrx300_exin_pin_map[] = {GPIO0, GPIO1, GPIO16, GPIO10, GPIO9};
 | 
						|
 | 
						|
static const unsigned xrx300_pins_exin0[] = {GPIO0};
 | 
						|
static const unsigned xrx300_pins_exin1[] = {GPIO1};
 | 
						|
static const unsigned xrx300_pins_exin2[] = {GPIO16};
 | 
						|
/* EXIN3 is not available on xrX300 */
 | 
						|
static const unsigned xrx300_pins_exin4[] = {GPIO10};
 | 
						|
static const unsigned xrx300_pins_exin5[] = {GPIO9};
 | 
						|
 | 
						|
static const unsigned xrx300_pins_usif_uart_rx[] = {GPIO11};
 | 
						|
static const unsigned xrx300_pins_usif_uart_tx[] = {GPIO10};
 | 
						|
 | 
						|
static const unsigned xrx300_pins_usif_spi_di[] = {GPIO11};
 | 
						|
static const unsigned xrx300_pins_usif_spi_do[] = {GPIO10};
 | 
						|
static const unsigned xrx300_pins_usif_spi_clk[] = {GPIO19};
 | 
						|
static const unsigned xrx300_pins_usif_spi_cs0[] = {GPIO14};
 | 
						|
 | 
						|
static const unsigned xrx300_pins_stp[] = {GPIO4, GPIO5, GPIO6};
 | 
						|
static const unsigned xrx300_pins_mdio[] = {GPIO42, GPIO43};
 | 
						|
 | 
						|
static const unsigned xrx300_pins_dfe_led0[] = {GPIO4};
 | 
						|
static const unsigned xrx300_pins_dfe_led1[] = {GPIO5};
 | 
						|
 | 
						|
static const unsigned xrx300_pins_ephy0_led0[] = {GPIO5};
 | 
						|
static const unsigned xrx300_pins_ephy0_led1[] = {GPIO8};
 | 
						|
static const unsigned xrx300_pins_ephy1_led0[] = {GPIO14};
 | 
						|
static const unsigned xrx300_pins_ephy1_led1[] = {GPIO19};
 | 
						|
 | 
						|
static const unsigned xrx300_pins_nand_ale[] = {GPIO13};
 | 
						|
static const unsigned xrx300_pins_nand_cs1[] = {GPIO23};
 | 
						|
static const unsigned xrx300_pins_nand_cle[] = {GPIO24};
 | 
						|
static const unsigned xrx300_pins_nand_rdy[] = {GPIO48};
 | 
						|
static const unsigned xrx300_pins_nand_rd[] = {GPIO49};
 | 
						|
static const unsigned xrx300_pins_nand_d1[] = {GPIO50};
 | 
						|
static const unsigned xrx300_pins_nand_d0[] = {GPIO51};
 | 
						|
static const unsigned xrx300_pins_nand_d2[] = {GPIO52};
 | 
						|
static const unsigned xrx300_pins_nand_d7[] = {GPIO53};
 | 
						|
static const unsigned xrx300_pins_nand_d6[] = {GPIO54};
 | 
						|
static const unsigned xrx300_pins_nand_d5[] = {GPIO55};
 | 
						|
static const unsigned xrx300_pins_nand_d4[] = {GPIO56};
 | 
						|
static const unsigned xrx300_pins_nand_d3[] = {GPIO57};
 | 
						|
static const unsigned xrx300_pins_nand_cs0[] = {GPIO58};
 | 
						|
static const unsigned xrx300_pins_nand_wr[] = {GPIO59};
 | 
						|
static const unsigned xrx300_pins_nand_wp[] = {GPIO60};
 | 
						|
static const unsigned xrx300_pins_nand_se[] = {GPIO61};
 | 
						|
 | 
						|
static const unsigned xrx300_pins_spi_di[] = {GPIO16};
 | 
						|
static const unsigned xrx300_pins_spi_do[] = {GPIO17};
 | 
						|
static const unsigned xrx300_pins_spi_clk[] = {GPIO18};
 | 
						|
static const unsigned xrx300_pins_spi_cs1[] = {GPIO15};
 | 
						|
/* SPI_CS2 is not available on xrX300 */
 | 
						|
/* SPI_CS3 is not available on xrX300 */
 | 
						|
static const unsigned xrx300_pins_spi_cs4[] = {GPIO10};
 | 
						|
/* SPI_CS5 is not available on xrX300 */
 | 
						|
static const unsigned xrx300_pins_spi_cs6[] = {GPIO11};
 | 
						|
 | 
						|
/* CLKOUT0 is not available on xrX300 */
 | 
						|
/* CLKOUT1 is not available on xrX300 */
 | 
						|
static const unsigned xrx300_pins_clkout2[] = {GPIO3};
 | 
						|
 | 
						|
static const struct ltq_pin_group xrx300_grps[] = {
 | 
						|
	GRP_MUX("exin0", EXIN, xrx300_pins_exin0),
 | 
						|
	GRP_MUX("exin1", EXIN, xrx300_pins_exin1),
 | 
						|
	GRP_MUX("exin2", EXIN, xrx300_pins_exin2),
 | 
						|
	GRP_MUX("exin4", EXIN, xrx300_pins_exin4),
 | 
						|
	GRP_MUX("exin5", EXIN, xrx300_pins_exin5),
 | 
						|
	GRP_MUX("nand ale", EBU, xrx300_pins_nand_ale),
 | 
						|
	GRP_MUX("nand cs1", EBU, xrx300_pins_nand_cs1),
 | 
						|
	GRP_MUX("nand cle", EBU, xrx300_pins_nand_cle),
 | 
						|
	GRP_MUX("nand rdy", EBU, xrx300_pins_nand_rdy),
 | 
						|
	GRP_MUX("nand rd", EBU, xrx300_pins_nand_rd),
 | 
						|
	GRP_MUX("nand d1", EBU, xrx300_pins_nand_d1),
 | 
						|
	GRP_MUX("nand d0", EBU, xrx300_pins_nand_d0),
 | 
						|
	GRP_MUX("nand d2", EBU, xrx300_pins_nand_d2),
 | 
						|
	GRP_MUX("nand d7", EBU, xrx300_pins_nand_d7),
 | 
						|
	GRP_MUX("nand d6", EBU, xrx300_pins_nand_d6),
 | 
						|
	GRP_MUX("nand d5", EBU, xrx300_pins_nand_d5),
 | 
						|
	GRP_MUX("nand d4", EBU, xrx300_pins_nand_d4),
 | 
						|
	GRP_MUX("nand d3", EBU, xrx300_pins_nand_d3),
 | 
						|
	GRP_MUX("nand cs0", EBU, xrx300_pins_nand_cs0),
 | 
						|
	GRP_MUX("nand wr", EBU, xrx300_pins_nand_wr),
 | 
						|
	GRP_MUX("nand wp", EBU, xrx300_pins_nand_wp),
 | 
						|
	GRP_MUX("nand se", EBU, xrx300_pins_nand_se),
 | 
						|
	GRP_MUX("spi_di", SPI, xrx300_pins_spi_di),
 | 
						|
	GRP_MUX("spi_do", SPI, xrx300_pins_spi_do),
 | 
						|
	GRP_MUX("spi_clk", SPI, xrx300_pins_spi_clk),
 | 
						|
	GRP_MUX("spi_cs1", SPI, xrx300_pins_spi_cs1),
 | 
						|
	GRP_MUX("spi_cs4", SPI, xrx300_pins_spi_cs4),
 | 
						|
	GRP_MUX("spi_cs6", SPI, xrx300_pins_spi_cs6),
 | 
						|
	GRP_MUX("usif uart_rx", USIF, xrx300_pins_usif_uart_rx),
 | 
						|
	GRP_MUX("usif uart_tx", USIF, xrx300_pins_usif_uart_tx),
 | 
						|
	GRP_MUX("usif spi_di", USIF, xrx300_pins_usif_spi_di),
 | 
						|
	GRP_MUX("usif spi_do", USIF, xrx300_pins_usif_spi_do),
 | 
						|
	GRP_MUX("usif spi_clk", USIF, xrx300_pins_usif_spi_clk),
 | 
						|
	GRP_MUX("usif spi_cs0", USIF, xrx300_pins_usif_spi_cs0),
 | 
						|
	GRP_MUX("stp", STP, xrx300_pins_stp),
 | 
						|
	GRP_MUX("clkout2", CGU, xrx300_pins_clkout2),
 | 
						|
	GRP_MUX("mdio", MDIO, xrx300_pins_mdio),
 | 
						|
	GRP_MUX("dfe led0", DFE, xrx300_pins_dfe_led0),
 | 
						|
	GRP_MUX("dfe led1", DFE, xrx300_pins_dfe_led1),
 | 
						|
	GRP_MUX("ephy0 led0", GPHY, xrx300_pins_ephy0_led0),
 | 
						|
	GRP_MUX("ephy0 led1", GPHY, xrx300_pins_ephy0_led1),
 | 
						|
	GRP_MUX("ephy1 led0", GPHY, xrx300_pins_ephy1_led0),
 | 
						|
	GRP_MUX("ephy1 led1", GPHY, xrx300_pins_ephy1_led1),
 | 
						|
};
 | 
						|
 | 
						|
static const char * const xrx300_spi_grps[] = {"spi_di", "spi_do",
 | 
						|
						"spi_clk", "spi_cs1",
 | 
						|
						"spi_cs4", "spi_cs6"};
 | 
						|
static const char * const xrx300_cgu_grps[] = {"clkout2"};
 | 
						|
static const char * const xrx300_ebu_grps[] = {"nand ale", "nand cs1",
 | 
						|
						"nand cle", "nand rdy",
 | 
						|
						"nand rd", "nand d1",
 | 
						|
						"nand d0", "nand d2",
 | 
						|
						"nand d7", "nand d6",
 | 
						|
						"nand d5", "nand d4",
 | 
						|
						"nand d3", "nand cs0",
 | 
						|
						"nand wr", "nand wp",
 | 
						|
						"nand se"};
 | 
						|
static const char * const xrx300_exin_grps[] = {"exin0", "exin1", "exin2",
 | 
						|
						"exin4", "exin5"};
 | 
						|
static const char * const xrx300_usif_grps[] = {"usif uart_rx", "usif uart_tx",
 | 
						|
						"usif spi_di", "usif spi_do",
 | 
						|
						"usif spi_clk", "usif spi_cs0"};
 | 
						|
static const char * const xrx300_stp_grps[] = {"stp"};
 | 
						|
static const char * const xrx300_mdio_grps[] = {"mdio"};
 | 
						|
static const char * const xrx300_dfe_grps[] = {"dfe led0", "dfe led1"};
 | 
						|
static const char * const xrx300_gphy_grps[] = {"ephy0 led0", "ephy0 led1",
 | 
						|
						"ephy1 led0", "ephy1 led1"};
 | 
						|
 | 
						|
static const struct ltq_pmx_func xrx300_funcs[] = {
 | 
						|
	{"spi",		ARRAY_AND_SIZE(xrx300_spi_grps)},
 | 
						|
	{"usif",	ARRAY_AND_SIZE(xrx300_usif_grps)},
 | 
						|
	{"cgu",		ARRAY_AND_SIZE(xrx300_cgu_grps)},
 | 
						|
	{"exin",	ARRAY_AND_SIZE(xrx300_exin_grps)},
 | 
						|
	{"stp",		ARRAY_AND_SIZE(xrx300_stp_grps)},
 | 
						|
	{"ebu",		ARRAY_AND_SIZE(xrx300_ebu_grps)},
 | 
						|
	{"mdio",	ARRAY_AND_SIZE(xrx300_mdio_grps)},
 | 
						|
	{"dfe",		ARRAY_AND_SIZE(xrx300_dfe_grps)},
 | 
						|
	{"ephy",	ARRAY_AND_SIZE(xrx300_gphy_grps)},
 | 
						|
};
 | 
						|
 | 
						|
/* ---------  pinconf related code --------- */
 | 
						|
static int xway_pinconf_get(struct pinctrl_dev *pctldev,
 | 
						|
				unsigned pin,
 | 
						|
				unsigned long *config)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
 | 
						|
	enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config);
 | 
						|
	int port = PORT(pin);
 | 
						|
	u32 reg;
 | 
						|
 | 
						|
	switch (param) {
 | 
						|
	case LTQ_PINCONF_PARAM_OPEN_DRAIN:
 | 
						|
		if (port == PORT3)
 | 
						|
			reg = GPIO3_OD;
 | 
						|
		else
 | 
						|
			reg = GPIO_OD(pin);
 | 
						|
		*config = LTQ_PINCONF_PACK(param,
 | 
						|
			!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
 | 
						|
		break;
 | 
						|
 | 
						|
	case LTQ_PINCONF_PARAM_PULL:
 | 
						|
		if (port == PORT3)
 | 
						|
			reg = GPIO3_PUDEN;
 | 
						|
		else
 | 
						|
			reg = GPIO_PUDEN(pin);
 | 
						|
		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) {
 | 
						|
			*config = LTQ_PINCONF_PACK(param, 0);
 | 
						|
			break;
 | 
						|
		}
 | 
						|
 | 
						|
		if (port == PORT3)
 | 
						|
			reg = GPIO3_PUDSEL;
 | 
						|
		else
 | 
						|
			reg = GPIO_PUDSEL(pin);
 | 
						|
		if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin)))
 | 
						|
			*config = LTQ_PINCONF_PACK(param, 2);
 | 
						|
		else
 | 
						|
			*config = LTQ_PINCONF_PACK(param, 1);
 | 
						|
		break;
 | 
						|
 | 
						|
	case LTQ_PINCONF_PARAM_OUTPUT:
 | 
						|
		reg = GPIO_DIR(pin);
 | 
						|
		*config = LTQ_PINCONF_PACK(param,
 | 
						|
			gpio_getbit(info->membase[0], reg, PORT_PIN(pin)));
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		dev_err(pctldev->dev, "Invalid config param %04x\n", param);
 | 
						|
		return -ENOTSUPP;
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int xway_pinconf_set(struct pinctrl_dev *pctldev,
 | 
						|
				unsigned pin,
 | 
						|
				unsigned long *configs,
 | 
						|
				unsigned num_configs)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
 | 
						|
	enum ltq_pinconf_param param;
 | 
						|
	int arg;
 | 
						|
	int port = PORT(pin);
 | 
						|
	u32 reg;
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < num_configs; i++) {
 | 
						|
		param = LTQ_PINCONF_UNPACK_PARAM(configs[i]);
 | 
						|
		arg = LTQ_PINCONF_UNPACK_ARG(configs[i]);
 | 
						|
 | 
						|
		switch (param) {
 | 
						|
		case LTQ_PINCONF_PARAM_OPEN_DRAIN:
 | 
						|
			if (port == PORT3)
 | 
						|
				reg = GPIO3_OD;
 | 
						|
			else
 | 
						|
				reg = GPIO_OD(pin);
 | 
						|
			if (arg == 0)
 | 
						|
				gpio_setbit(info->membase[0],
 | 
						|
					reg,
 | 
						|
					PORT_PIN(pin));
 | 
						|
			else
 | 
						|
				gpio_clearbit(info->membase[0],
 | 
						|
					reg,
 | 
						|
					PORT_PIN(pin));
 | 
						|
			break;
 | 
						|
 | 
						|
		case LTQ_PINCONF_PARAM_PULL:
 | 
						|
			if (port == PORT3)
 | 
						|
				reg = GPIO3_PUDEN;
 | 
						|
			else
 | 
						|
				reg = GPIO_PUDEN(pin);
 | 
						|
			if (arg == 0) {
 | 
						|
				gpio_clearbit(info->membase[0],
 | 
						|
					reg,
 | 
						|
					PORT_PIN(pin));
 | 
						|
				break;
 | 
						|
			}
 | 
						|
			gpio_setbit(info->membase[0], reg, PORT_PIN(pin));
 | 
						|
 | 
						|
			if (port == PORT3)
 | 
						|
				reg = GPIO3_PUDSEL;
 | 
						|
			else
 | 
						|
				reg = GPIO_PUDSEL(pin);
 | 
						|
			if (arg == 1)
 | 
						|
				gpio_clearbit(info->membase[0],
 | 
						|
					reg,
 | 
						|
					PORT_PIN(pin));
 | 
						|
			else if (arg == 2)
 | 
						|
				gpio_setbit(info->membase[0],
 | 
						|
					reg,
 | 
						|
					PORT_PIN(pin));
 | 
						|
			else
 | 
						|
				dev_err(pctldev->dev,
 | 
						|
					"Invalid pull value %d\n", arg);
 | 
						|
			break;
 | 
						|
 | 
						|
		case LTQ_PINCONF_PARAM_OUTPUT:
 | 
						|
			reg = GPIO_DIR(pin);
 | 
						|
			if (arg == 0)
 | 
						|
				gpio_clearbit(info->membase[0],
 | 
						|
					reg,
 | 
						|
					PORT_PIN(pin));
 | 
						|
			else
 | 
						|
				gpio_setbit(info->membase[0],
 | 
						|
					reg,
 | 
						|
					PORT_PIN(pin));
 | 
						|
			break;
 | 
						|
 | 
						|
		default:
 | 
						|
			dev_err(pctldev->dev,
 | 
						|
				"Invalid config param %04x\n", param);
 | 
						|
			return -ENOTSUPP;
 | 
						|
		}
 | 
						|
	} /* for each config */
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
int xway_pinconf_group_set(struct pinctrl_dev *pctldev,
 | 
						|
			unsigned selector,
 | 
						|
			unsigned long *configs,
 | 
						|
			unsigned num_configs)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev);
 | 
						|
	int i, ret = 0;
 | 
						|
 | 
						|
	for (i = 0; i < info->grps[selector].npins && !ret; i++)
 | 
						|
		ret = xway_pinconf_set(pctldev,
 | 
						|
				info->grps[selector].pins[i],
 | 
						|
				configs,
 | 
						|
				num_configs);
 | 
						|
 | 
						|
	return ret;
 | 
						|
}
 | 
						|
 | 
						|
static const struct pinconf_ops xway_pinconf_ops = {
 | 
						|
	.pin_config_get	= xway_pinconf_get,
 | 
						|
	.pin_config_set	= xway_pinconf_set,
 | 
						|
	.pin_config_group_set = xway_pinconf_group_set,
 | 
						|
};
 | 
						|
 | 
						|
static struct pinctrl_desc xway_pctrl_desc = {
 | 
						|
	.owner		= THIS_MODULE,
 | 
						|
	.confops	= &xway_pinconf_ops,
 | 
						|
};
 | 
						|
 | 
						|
static inline int xway_mux_apply(struct pinctrl_dev *pctrldev,
 | 
						|
				int pin, int mux)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev);
 | 
						|
	int port = PORT(pin);
 | 
						|
	u32 alt1_reg = GPIO_ALT1(pin);
 | 
						|
 | 
						|
	if (port == PORT3)
 | 
						|
		alt1_reg = GPIO3_ALT1;
 | 
						|
 | 
						|
	if (mux & MUX_ALT0)
 | 
						|
		gpio_setbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin));
 | 
						|
	else
 | 
						|
		gpio_clearbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin));
 | 
						|
 | 
						|
	if (mux & MUX_ALT1)
 | 
						|
		gpio_setbit(info->membase[0], alt1_reg, PORT_PIN(pin));
 | 
						|
	else
 | 
						|
		gpio_clearbit(info->membase[0], alt1_reg, PORT_PIN(pin));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static const struct ltq_cfg_param xway_cfg_params[] = {
 | 
						|
	{"lantiq,pull",		LTQ_PINCONF_PARAM_PULL},
 | 
						|
	{"lantiq,open-drain",	LTQ_PINCONF_PARAM_OPEN_DRAIN},
 | 
						|
	{"lantiq,output",	LTQ_PINCONF_PARAM_OUTPUT},
 | 
						|
};
 | 
						|
 | 
						|
static struct ltq_pinmux_info xway_info = {
 | 
						|
	.desc		= &xway_pctrl_desc,
 | 
						|
	.apply_mux	= xway_mux_apply,
 | 
						|
	.params		= xway_cfg_params,
 | 
						|
	.num_params	= ARRAY_SIZE(xway_cfg_params),
 | 
						|
};
 | 
						|
 | 
						|
/* ---------  gpio_chip related code --------- */
 | 
						|
static void xway_gpio_set(struct gpio_chip *chip, unsigned int pin, int val)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = dev_get_drvdata(chip->parent);
 | 
						|
 | 
						|
	if (val)
 | 
						|
		gpio_setbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin));
 | 
						|
	else
 | 
						|
		gpio_clearbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin));
 | 
						|
}
 | 
						|
 | 
						|
static int xway_gpio_get(struct gpio_chip *chip, unsigned int pin)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = dev_get_drvdata(chip->parent);
 | 
						|
 | 
						|
	return !!gpio_getbit(info->membase[0], GPIO_IN(pin), PORT_PIN(pin));
 | 
						|
}
 | 
						|
 | 
						|
static int xway_gpio_dir_in(struct gpio_chip *chip, unsigned int pin)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = dev_get_drvdata(chip->parent);
 | 
						|
 | 
						|
	gpio_clearbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = dev_get_drvdata(chip->parent);
 | 
						|
 | 
						|
	if (PORT(pin) == PORT3)
 | 
						|
		gpio_setbit(info->membase[0], GPIO3_OD, PORT_PIN(pin));
 | 
						|
	else
 | 
						|
		gpio_setbit(info->membase[0], GPIO_OD(pin), PORT_PIN(pin));
 | 
						|
	gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin));
 | 
						|
	xway_gpio_set(chip, pin, val);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * gpiolib gpiod_to_irq callback function.
 | 
						|
 * Returns the mapped IRQ (external interrupt) number for a given GPIO pin.
 | 
						|
 */
 | 
						|
static int xway_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 | 
						|
{
 | 
						|
	struct ltq_pinmux_info *info = dev_get_drvdata(chip->parent);
 | 
						|
	int i;
 | 
						|
 | 
						|
	for (i = 0; i < info->num_exin; i++)
 | 
						|
		if (info->exin[i] == offset)
 | 
						|
			return ltq_eiu_get_irq(i);
 | 
						|
 | 
						|
	return -1;
 | 
						|
}
 | 
						|
 | 
						|
static struct gpio_chip xway_chip = {
 | 
						|
	.label = "gpio-xway",
 | 
						|
	.direction_input = xway_gpio_dir_in,
 | 
						|
	.direction_output = xway_gpio_dir_out,
 | 
						|
	.get = xway_gpio_get,
 | 
						|
	.set = xway_gpio_set,
 | 
						|
	.request = gpiochip_generic_request,
 | 
						|
	.free = gpiochip_generic_free,
 | 
						|
	.to_irq = xway_gpio_to_irq,
 | 
						|
	.base = -1,
 | 
						|
};
 | 
						|
 | 
						|
 | 
						|
/* --------- register the pinctrl layer --------- */
 | 
						|
struct pinctrl_xway_soc {
 | 
						|
	int pin_count;
 | 
						|
	const struct ltq_mfp_pin *mfp;
 | 
						|
	const struct ltq_pin_group *grps;
 | 
						|
	unsigned int num_grps;
 | 
						|
	const struct ltq_pmx_func *funcs;
 | 
						|
	unsigned int num_funcs;
 | 
						|
	const unsigned *exin;
 | 
						|
	unsigned int num_exin;
 | 
						|
};
 | 
						|
 | 
						|
/* xway xr9 series (DEPRECATED: Use XWAY xRX100/xRX200 Family) */
 | 
						|
static struct pinctrl_xway_soc xr9_pinctrl = {
 | 
						|
	.pin_count = XR9_MAX_PIN,
 | 
						|
	.mfp = xway_mfp,
 | 
						|
	.grps = xway_grps,
 | 
						|
	.num_grps = ARRAY_SIZE(xway_grps),
 | 
						|
	.funcs = xrx_funcs,
 | 
						|
	.num_funcs = ARRAY_SIZE(xrx_funcs),
 | 
						|
	.exin = xway_exin_pin_map,
 | 
						|
	.num_exin = 6
 | 
						|
};
 | 
						|
 | 
						|
/* XWAY AMAZON Family */
 | 
						|
static struct pinctrl_xway_soc ase_pinctrl = {
 | 
						|
	.pin_count = ASE_MAX_PIN,
 | 
						|
	.mfp = ase_mfp,
 | 
						|
	.grps = ase_grps,
 | 
						|
	.num_grps = ARRAY_SIZE(ase_grps),
 | 
						|
	.funcs = ase_funcs,
 | 
						|
	.num_funcs = ARRAY_SIZE(ase_funcs),
 | 
						|
	.exin = ase_exin_pin_map,
 | 
						|
	.num_exin = 3
 | 
						|
};
 | 
						|
 | 
						|
/* XWAY DANUBE Family */
 | 
						|
static struct pinctrl_xway_soc danube_pinctrl = {
 | 
						|
	.pin_count = DANUBE_MAX_PIN,
 | 
						|
	.mfp = danube_mfp,
 | 
						|
	.grps = danube_grps,
 | 
						|
	.num_grps = ARRAY_SIZE(danube_grps),
 | 
						|
	.funcs = danube_funcs,
 | 
						|
	.num_funcs = ARRAY_SIZE(danube_funcs),
 | 
						|
	.exin = danube_exin_pin_map,
 | 
						|
	.num_exin = 3
 | 
						|
};
 | 
						|
 | 
						|
/* XWAY xRX100 Family */
 | 
						|
static struct pinctrl_xway_soc xrx100_pinctrl = {
 | 
						|
	.pin_count = XRX100_MAX_PIN,
 | 
						|
	.mfp = xrx100_mfp,
 | 
						|
	.grps = xrx100_grps,
 | 
						|
	.num_grps = ARRAY_SIZE(xrx100_grps),
 | 
						|
	.funcs = xrx100_funcs,
 | 
						|
	.num_funcs = ARRAY_SIZE(xrx100_funcs),
 | 
						|
	.exin = xrx100_exin_pin_map,
 | 
						|
	.num_exin = 6
 | 
						|
};
 | 
						|
 | 
						|
/* XWAY xRX200 Family */
 | 
						|
static struct pinctrl_xway_soc xrx200_pinctrl = {
 | 
						|
	.pin_count = XRX200_MAX_PIN,
 | 
						|
	.mfp = xrx200_mfp,
 | 
						|
	.grps = xrx200_grps,
 | 
						|
	.num_grps = ARRAY_SIZE(xrx200_grps),
 | 
						|
	.funcs = xrx200_funcs,
 | 
						|
	.num_funcs = ARRAY_SIZE(xrx200_funcs),
 | 
						|
	.exin = xrx200_exin_pin_map,
 | 
						|
	.num_exin = 6
 | 
						|
};
 | 
						|
 | 
						|
/* XWAY xRX300 Family */
 | 
						|
static struct pinctrl_xway_soc xrx300_pinctrl = {
 | 
						|
	.pin_count = XRX300_MAX_PIN,
 | 
						|
	.mfp = xrx300_mfp,
 | 
						|
	.grps = xrx300_grps,
 | 
						|
	.num_grps = ARRAY_SIZE(xrx300_grps),
 | 
						|
	.funcs = xrx300_funcs,
 | 
						|
	.num_funcs = ARRAY_SIZE(xrx300_funcs),
 | 
						|
	.exin = xrx300_exin_pin_map,
 | 
						|
	.num_exin = 5
 | 
						|
};
 | 
						|
 | 
						|
static struct pinctrl_gpio_range xway_gpio_range = {
 | 
						|
	.name	= "XWAY GPIO",
 | 
						|
	.gc	= &xway_chip,
 | 
						|
};
 | 
						|
 | 
						|
static const struct of_device_id xway_match[] = {
 | 
						|
	{ .compatible = "lantiq,pinctrl-xway", .data = &danube_pinctrl}, /*DEPRECATED*/
 | 
						|
	{ .compatible = "lantiq,pinctrl-xr9", .data = &xr9_pinctrl}, /*DEPRECATED*/
 | 
						|
	{ .compatible = "lantiq,pinctrl-ase", .data = &ase_pinctrl}, /*DEPRECATED*/
 | 
						|
	{ .compatible = "lantiq,ase-pinctrl", .data = &ase_pinctrl},
 | 
						|
	{ .compatible = "lantiq,danube-pinctrl", .data = &danube_pinctrl},
 | 
						|
	{ .compatible = "lantiq,xrx100-pinctrl", .data = &xrx100_pinctrl},
 | 
						|
	{ .compatible = "lantiq,xrx200-pinctrl", .data = &xrx200_pinctrl},
 | 
						|
	{ .compatible = "lantiq,xrx300-pinctrl", .data = &xrx300_pinctrl},
 | 
						|
	{},
 | 
						|
};
 | 
						|
MODULE_DEVICE_TABLE(of, xway_match);
 | 
						|
 | 
						|
static int pinmux_xway_probe(struct platform_device *pdev)
 | 
						|
{
 | 
						|
	const struct of_device_id *match;
 | 
						|
	const struct pinctrl_xway_soc *xway_soc;
 | 
						|
	struct resource *res;
 | 
						|
	int ret, i;
 | 
						|
 | 
						|
	/* get and remap our register range */
 | 
						|
	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 | 
						|
	xway_info.membase[0] = devm_ioremap_resource(&pdev->dev, res);
 | 
						|
	if (IS_ERR(xway_info.membase[0]))
 | 
						|
		return PTR_ERR(xway_info.membase[0]);
 | 
						|
 | 
						|
	match = of_match_device(xway_match, &pdev->dev);
 | 
						|
	if (match)
 | 
						|
		xway_soc = (const struct pinctrl_xway_soc *) match->data;
 | 
						|
	else
 | 
						|
		xway_soc = &danube_pinctrl;
 | 
						|
 | 
						|
	/* find out how many pads we have */
 | 
						|
	xway_chip.ngpio = xway_soc->pin_count;
 | 
						|
 | 
						|
	/* load our pad descriptors */
 | 
						|
	xway_info.pads = devm_kzalloc(&pdev->dev,
 | 
						|
			sizeof(struct pinctrl_pin_desc) * xway_chip.ngpio,
 | 
						|
			GFP_KERNEL);
 | 
						|
	if (!xway_info.pads) {
 | 
						|
		dev_err(&pdev->dev, "Failed to allocate pads\n");
 | 
						|
		return -ENOMEM;
 | 
						|
	}
 | 
						|
	for (i = 0; i < xway_chip.ngpio; i++) {
 | 
						|
		/* strlen("ioXY") + 1 = 5 */
 | 
						|
		char *name = devm_kzalloc(&pdev->dev, 5, GFP_KERNEL);
 | 
						|
 | 
						|
		if (!name) {
 | 
						|
			dev_err(&pdev->dev, "Failed to allocate pad name\n");
 | 
						|
			return -ENOMEM;
 | 
						|
		}
 | 
						|
		snprintf(name, 5, "io%d", i);
 | 
						|
		xway_info.pads[i].number = GPIO0 + i;
 | 
						|
		xway_info.pads[i].name = name;
 | 
						|
	}
 | 
						|
	xway_pctrl_desc.pins = xway_info.pads;
 | 
						|
 | 
						|
	/* register the gpio chip */
 | 
						|
	xway_chip.parent = &pdev->dev;
 | 
						|
	ret = devm_gpiochip_add_data(&pdev->dev, &xway_chip, NULL);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&pdev->dev, "Failed to register gpio chip\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	/* setup the data needed by pinctrl */
 | 
						|
	xway_pctrl_desc.name	= dev_name(&pdev->dev);
 | 
						|
	xway_pctrl_desc.npins	= xway_chip.ngpio;
 | 
						|
 | 
						|
	xway_info.num_pads	= xway_chip.ngpio;
 | 
						|
	xway_info.num_mfp	= xway_chip.ngpio;
 | 
						|
	xway_info.mfp		= xway_soc->mfp;
 | 
						|
	xway_info.grps		= xway_soc->grps;
 | 
						|
	xway_info.num_grps	= xway_soc->num_grps;
 | 
						|
	xway_info.funcs		= xway_soc->funcs;
 | 
						|
	xway_info.num_funcs	= xway_soc->num_funcs;
 | 
						|
	xway_info.exin		= xway_soc->exin;
 | 
						|
	xway_info.num_exin	= xway_soc->num_exin;
 | 
						|
 | 
						|
	/* register with the generic lantiq layer */
 | 
						|
	ret = ltq_pinctrl_register(pdev, &xway_info);
 | 
						|
	if (ret) {
 | 
						|
		dev_err(&pdev->dev, "Failed to register pinctrl driver\n");
 | 
						|
		return ret;
 | 
						|
	}
 | 
						|
 | 
						|
	/* finish with registering the gpio range in pinctrl */
 | 
						|
	xway_gpio_range.npins = xway_chip.ngpio;
 | 
						|
	xway_gpio_range.base = xway_chip.base;
 | 
						|
	pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range);
 | 
						|
	dev_info(&pdev->dev, "Init done\n");
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static struct platform_driver pinmux_xway_driver = {
 | 
						|
	.probe	= pinmux_xway_probe,
 | 
						|
	.driver = {
 | 
						|
		.name	= "pinctrl-xway",
 | 
						|
		.of_match_table = xway_match,
 | 
						|
	},
 | 
						|
};
 | 
						|
 | 
						|
static int __init pinmux_xway_init(void)
 | 
						|
{
 | 
						|
	return platform_driver_register(&pinmux_xway_driver);
 | 
						|
}
 | 
						|
 | 
						|
core_initcall_sync(pinmux_xway_init);
 |