public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-05-24 10:39:52 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/drivers/net/phy
History
Antoine Tenart 7a1d8390d0 net: phy: micrel: make sure the factory test bit is cleared 
The KSZ8081 PHY has a factory test mode which is set at the de-assertion
of the reset line based on the RXER (KSZ8081RNA/RND) or TXC
(KSZ8081MNX/RNB) pin. If a pull-down is missing, or if the pin has a
pull-up, the factory test mode should be cleared by manually writing a 0
(according to the datasheet). This patch makes sure this factory test
bit is cleared in config_init().

Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-29 23:17:21 -04:00
..
amd.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
aquantia.h
aquantia_hwmon.c
aquantia_main.c net: phy: remove unnecessary callback settings in C45 drivers 2019-04-09 13:07:07 -07:00
asix.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
at803x.c net: mdio: rename mdio_device reset to reset_gpio 2019-04-18 17:42:54 -07:00
bcm-cygnus.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
bcm-phy-lib.c net: phy: Prepare for moving Omega out of bcm7xxx 2019-03-21 13:41:26 -07:00
bcm-phy-lib.h net: phy: Prepare for moving Omega out of bcm7xxx 2019-03-21 13:41:26 -07:00
bcm7xxx.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
bcm63xx.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
bcm87xx.c
broadcom.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
cicada.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
cortina.c
davicom.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
dp83tc811.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
dp83640.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
dp83640_reg.h
dp83822.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
dp83848.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
dp83867.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
et1011c.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
fixed_phy.c
icplus.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
intel-xway.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
Kconfig net: phy: mscc: add support for VSC8514 PHY. 2019-04-23 10:47:58 -07:00
lxt.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
Makefile net: phy: add amlogic g12a mdio mux support 2019-04-06 18:16:58 -07:00
marvell.c net: phy: marvell: add new default led configure for m88e151x 2019-04-23 10:40:32 -07:00
marvell10g.c net: phy: remove unnecessary callback settings in C45 drivers 2019-04-09 13:07:07 -07:00
mdio-bcm-iproc.c
mdio-bcm-unimac.c net: phy: mdio-bcm-unimac: remove redundant !timeout check 2019-03-27 14:27:30 -07:00
mdio-bitbang.c
mdio-boardinfo.c
mdio-boardinfo.h
mdio-cavium.c
mdio-cavium.h
mdio-gpio.c
mdio-hisi-femac.c
mdio-i2c.c
mdio-i2c.h
mdio-moxart.c
mdio-mscc-miim.c
mdio-mux-bcm-iproc.c
mdio-mux-gpio.c
mdio-mux-meson-g12a.c net: phy: add amlogic g12a mdio mux support 2019-04-06 18:16:58 -07:00
mdio-mux-mmioreg.c
mdio-mux-multiplexer.c
mdio-mux.c
mdio-octeon.c
mdio-sun4i.c
mdio-thunder.c
mdio-xgene.c
mdio-xgene.h
mdio_bus.c net: mdio: rename mdio_device reset to reset_gpio 2019-04-18 17:42:54 -07:00
mdio_device.c net: mdio: rename mdio_device reset to reset_gpio 2019-04-18 17:42:54 -07:00
meson-gxl.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
micrel.c net: phy: micrel: make sure the factory test bit is cleared 2019-04-29 23:17:21 -04:00
microchip.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
microchip_t1.c
mscc.c net: phy: mscc: add support for VSC8514 PHY. 2019-04-23 10:47:58 -07:00
national.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
phy-c45.c net: phy: replace genphy_10g_driver with genphy_c45_driver 2019-04-08 16:24:05 -07:00
phy-core.c phy: warn if phylib and ethtool PHY mode definitions are out of sync 2019-04-14 13:37:06 -07:00
phy.c net: phy: remove dead code from phy_sanitize_settings 2019-04-18 16:30:55 -07:00
phy_device.c net: phy: avoid unneeded MDIO reads in genphy_read_status 2019-04-28 19:48:04 -04:00
phy_led_triggers.c
phylink.c
qsemi.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
realtek.c net: phy: realtek: remove setting callback get_features and use phylib fallback 2019-04-04 17:55:37 -07:00
rockchip.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
sfp-bus.c
sfp.c
sfp.h
smsc.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
spi_ks8995.c spi: Micrel eth switch: declare missing of table 2019-04-23 10:44:44 -07:00
ste10Xp.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
swphy.c
swphy.h
teranetics.c
uPD60620.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
vitesse.c net: phy: vitesse: Remove support for VSC8514. 2019-04-23 10:47:58 -07:00
xilinx_gmii2rgmii.c