Luis R. Rodriguez 824b185adf ath9k_hw: Fix regulatory CTL index usage for AR9003 ... AR9003 was not relying on the CTL indexes from the EEPROM for capping the max output power. The CTL indexes from the EEPROM provide calibrated limits for output power for each tested and supported frequency. Without this the device operates at a power level which only conforms to the transmit spectrum mask as specified by IEEE Annex I.2.3. The regulatory limit by CRDA is always used but does not provide calibrated values for optimal performance, specially on band edges. Using the calibrated data from the EEPROM ensures the device operates at optimal output power while still ensuring proper regulatory compliance. The device uses the minimum of these tree values, the value from CRDA, the calibrated value from CTL indexex, and the value to conform to the IEEE transmit spectrum mask. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2010-08-04 15:27:38 -04:00
..
ahb.c	drivers/net/wireless: Use wiphy_<level>	2010-07-27 15:14:13 -04:00
ani.c
ani.h
ar5008_initvals.h	ath9k_hw: reformat the ar5008, ar9001 and ar9002 initvals to match ar9003	2010-07-02 13:44:34 -04:00
ar5008_phy.c	ath9k_hw: fix invalid extension channel noisefloor readings in HT20	2010-07-26 15:32:42 -04:00
ar9001_initvals.h	ath9k_hw: sync initvals for ar9001 and ar9002 with Atheros	2010-07-02 13:44:35 -04:00
ar9002_calib.c	ath9k_hw: fix a noise floor calibration related race condition	2010-08-04 15:27:37 -04:00
ar9002_hw.c	ath9k_hw: remove initvals for hardware which was never sold	2010-07-14 13:52:46 -04:00
ar9002_initvals.h	ath9k_hw: remove initvals for hardware which was never sold	2010-07-14 13:52:46 -04:00
ar9002_mac.c	ath9k_hw: report the TID in the tx status on AR5008-AR9002	2010-07-12 16:05:38 -04:00
ar9002_phy.c	ath9k_hw: fix invalid extension channel noisefloor readings in HT20	2010-07-26 15:32:42 -04:00
ar9002_phy.h	ath9k_hw: sanitize noise floor values properly on all chips	2010-07-02 13:44:36 -04:00
ar9003_2p0_initvals.h
ar9003_2p2_initvals.h
ar9003_calib.c	ath9k_hw: clean up per-channel calibration data	2010-08-04 15:27:37 -04:00
ar9003_eeprom.c	ath9k_hw: Fix regulatory CTL index usage for AR9003	2010-08-04 15:27:38 -04:00
ar9003_eeprom.h
ar9003_hw.c	ath9k_hw: dynamically choose the SERDES array for low power	2010-06-23 15:14:03 -04:00
ar9003_mac.c	ath9k_hw: Fix AR9003 MPDU delimeter CRC check for middle subframes	2010-07-16 14:03:42 -04:00
ar9003_mac.h	ath9k_hw: report the TID in the tx status on AR5008-AR9002	2010-07-12 16:05:38 -04:00
ar9003_paprd.c	ath9k_hw: clean up per-channel calibration data	2010-08-04 15:27:37 -04:00
ar9003_phy.c	ath9k_hw: fix analog shift register writes on AR9003	2010-08-04 15:27:37 -04:00
ar9003_phy.h
ath9k.h	ath9k_hw: clean up per-channel calibration data	2010-08-04 15:27:37 -04:00
beacon.c
btcoex.c
btcoex.h
calib.c	ath9k_hw: fix a noise floor calibration related race condition	2010-08-04 15:27:37 -04:00
calib.h	ath9k_hw: fix a noise floor calibration related race condition	2010-08-04 15:27:37 -04:00
common.c	ath9k: fix crash with WEP in ad-hoc mode	2010-07-02 13:44:38 -04:00
common.h
debug.c
debug.h
eeprom.c
eeprom.h	ath9k_hw: fix antenna diversity on AR9285	2010-07-12 16:05:37 -04:00
eeprom_4k.c	ath9k: remove unneeded calculation of minimal calibration power	2010-07-14 13:52:45 -04:00
eeprom_9287.c	ath9k: remove unneeded calculation of minimal calibration power	2010-07-14 13:52:45 -04:00
eeprom_def.c	ath9k: remove unneeded calculation of minimal calibration power	2010-07-14 13:52:45 -04:00
gpio.c	ath9k: Add a module parameter to disable led blinking.	2010-06-23 15:14:05 -04:00
hif_usb.c	Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6	2010-07-13 15:31:51 -04:00
hif_usb.h
htc.h	ath9k_hw: clean up per-channel calibration data	2010-08-04 15:27:37 -04:00
htc_drv_beacon.c
htc_drv_init.c
htc_drv_main.c	ath9k_hw: clean up per-channel calibration data	2010-08-04 15:27:37 -04:00
htc_drv_txrx.c
htc_hst.c
htc_hst.h
hw-ops.h	ath9k: merge noisefloor load implementations	2010-07-12 16:05:39 -04:00
hw.c	ath9k_hw: clean up per-channel calibration data	2010-08-04 15:27:37 -04:00
hw.h	ath9k_hw: fix a noise floor calibration related race condition	2010-08-04 15:27:37 -04:00
init.c	ath9k: fix panic while cleaning up virtaul wifis	2010-07-14 13:52:45 -04:00
Kconfig
mac.c
mac.h	ath9k_hw: report the TID in the tx status on AR5008-AR9002	2010-07-12 16:05:38 -04:00
main.c	ath9k_hw: clean up per-channel calibration data	2010-08-04 15:27:37 -04:00
Makefile
pci.c	drivers/net/wireless: Use wiphy_<level>	2010-07-27 15:14:13 -04:00
phy.h
rc.c	ath9k: remove unused base_index from rate table.	2010-07-27 14:59:59 -04:00
rc.h	ath9k: remove unused base_index from rate table.	2010-07-27 14:59:59 -04:00
recv.c
reg.h	ath9k_htc: Add LED support for AR7010	2010-06-30 15:00:53 -04:00
virtual.c	ath9k: Fix inconsistency between txq->stopped and the actual queue state	2010-07-26 15:32:41 -04:00
wmi.c
wmi.h
xmit.c	ath9k_hw: clean up per-channel calibration data	2010-08-04 15:27:37 -04:00