linux/drivers/reset/reset-rzg2l-usbphy-ctrl.c
Biju Das 4068f22e4b reset: renesas: Add USB VBUS regulator device as child
As per RZ/G2L HW manual, VBUS enable can be controlled by the VBOUT bit
of the VBUS Control Register(VBENCTL) register in the USBPHY Control.

Expose this register as regmap and instantiate the USB VBUS regulator
device, so that consumer can control the vbus using regulator API's

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20240702180032.207275-3-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2024-07-03 10:51:53 +02:00

219 lines
5.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Renesas RZ/G2L USBPHY control driver
*
* Copyright (C) 2021 Renesas Electronics Corporation
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/reset-controller.h>
#define RESET 0x000
#define VBENCTL 0x03c
#define RESET_SEL_PLLRESET BIT(12)
#define RESET_PLLRESET BIT(8)
#define RESET_SEL_P2RESET BIT(5)
#define RESET_SEL_P1RESET BIT(4)
#define RESET_PHYRST_2 BIT(1)
#define RESET_PHYRST_1 BIT(0)
#define PHY_RESET_PORT2 (RESET_SEL_P2RESET | RESET_PHYRST_2)
#define PHY_RESET_PORT1 (RESET_SEL_P1RESET | RESET_PHYRST_1)
#define NUM_PORTS 2
struct rzg2l_usbphy_ctrl_priv {
struct reset_controller_dev rcdev;
struct reset_control *rstc;
void __iomem *base;
struct platform_device *vdev;
spinlock_t lock;
};
#define rcdev_to_priv(x) container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev)
static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2;
void __iomem *base = priv->base;
unsigned long flags;
u32 val;
spin_lock_irqsave(&priv->lock, flags);
val = readl(base + RESET);
val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
if (port_mask == (val & port_mask))
val |= RESET_PLLRESET;
writel(val, base + RESET);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
void __iomem *base = priv->base;
unsigned long flags;
u32 val;
spin_lock_irqsave(&priv->lock, flags);
val = readl(base + RESET);
val |= RESET_SEL_PLLRESET;
val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1));
writel(val, base + RESET);
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
}
static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev);
u32 port_mask;
port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1;
return !!(readl(priv->base + RESET) & port_mask);
}
static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
{ .compatible = "renesas,rzg2l-usbphy-ctrl" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);
static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = {
.assert = rzg2l_usbphy_ctrl_assert,
.deassert = rzg2l_usbphy_ctrl_deassert,
.status = rzg2l_usbphy_ctrl_status,
};
static const struct regmap_config rzg2l_usb_regconf = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 1,
};
static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rzg2l_usbphy_ctrl_priv *priv;
struct platform_device *vdev;
struct regmap *regmap;
unsigned long flags;
int error;
u32 val;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
regmap = devm_regmap_init_mmio(dev, priv->base + VBENCTL, &rzg2l_usb_regconf);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (IS_ERR(priv->rstc))
return dev_err_probe(dev, PTR_ERR(priv->rstc),
"failed to get reset\n");
error = reset_control_deassert(priv->rstc);
if (error)
return error;
spin_lock_init(&priv->lock);
dev_set_drvdata(dev, priv);
pm_runtime_enable(&pdev->dev);
error = pm_runtime_resume_and_get(&pdev->dev);
if (error < 0) {
dev_err_probe(&pdev->dev, error, "pm_runtime_resume_and_get failed");
goto err_pm_disable_reset_deassert;
}
/* put pll and phy into reset state */
spin_lock_irqsave(&priv->lock, flags);
val = readl(priv->base + RESET);
val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1;
writel(val, priv->base + RESET);
spin_unlock_irqrestore(&priv->lock, flags);
priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops;
priv->rcdev.of_reset_n_cells = 1;
priv->rcdev.nr_resets = NUM_PORTS;
priv->rcdev.of_node = dev->of_node;
priv->rcdev.dev = dev;
error = devm_reset_controller_register(dev, &priv->rcdev);
if (error)
goto err_pm_runtime_put;
vdev = platform_device_alloc("rzg2l-usb-vbus-regulator", pdev->id);
if (!vdev) {
error = -ENOMEM;
goto err_pm_runtime_put;
}
vdev->dev.parent = dev;
priv->vdev = vdev;
error = platform_device_add(vdev);
if (error)
goto err_device_put;
return 0;
err_device_put:
platform_device_put(vdev);
err_pm_runtime_put:
pm_runtime_put(&pdev->dev);
err_pm_disable_reset_deassert:
pm_runtime_disable(&pdev->dev);
reset_control_assert(priv->rstc);
return error;
}
static int rzg2l_usbphy_ctrl_remove(struct platform_device *pdev)
{
struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev);
platform_device_unregister(priv->vdev);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
reset_control_assert(priv->rstc);
return 0;
}
static struct platform_driver rzg2l_usbphy_ctrl_driver = {
.driver = {
.name = "rzg2l_usbphy_ctrl",
.of_match_table = rzg2l_usbphy_ctrl_match_table,
},
.probe = rzg2l_usbphy_ctrl_probe,
.remove = rzg2l_usbphy_ctrl_remove,
};
module_platform_driver(rzg2l_usbphy_ctrl_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control");
MODULE_AUTHOR("biju.das.jz@bp.renesas.com>");