linux/arch/arm/mach-omap1
Tony Lindgren 7bf15c4360 ARM: OMAP1: Fix section mismatch warnings for omap_cfg_reg
This is cleary used after init time too for example for
configuring UART wake-up events during runtime. This fixes
section mismatch warnings for randconfig builds that happen
because __init_or_module.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-21 14:50:23 -07:00
..
include/mach ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
ams-delta-fiq-handler.S ARM: OMAP1: Change interrupt numbering for sparse IRQ 2015-05-20 09:01:21 -07:00
ams-delta-fiq.c arm: omap: Fix typo in ams-delta-fiq.c 2014-03-20 12:44:02 +01:00
board-ams-delta.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-fsample.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-generic.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-h2-mmc.c
board-h2.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-h2.h
board-h3-mmc.c ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
board-h3.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-h3.h
board-htcherald.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-innovator.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-nand.c
board-nokia770.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-osk.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-palmte.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-palmtt.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-palmz71.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-perseus2.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-sx1-mmc.c
board-sx1.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
board-voiceblue.c ARM: omap1: Switch to use MULTI_IRQ 2015-05-20 09:01:21 -07:00
clock.c
clock.h
clock_data.c
common.h ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
devices.c ARM: OMAP1: Remove duplicated DMA channel definitions 2013-06-18 00:12:34 -07:00
dma.c ARM: OMAP1: Change interrupt numbering for sparse IRQ 2015-05-20 09:01:21 -07:00
fb.c
flash.c
fpga.c ARM: OMAP: remove deprecated IRQF_DISABLED 2013-10-03 13:24:36 -07:00
fpga.h
gpio7xx.c ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
gpio15xx.c ARM: OMAP1: Fix a bunch of GPIO related section warnings after initdata got corrected 2013-10-18 10:50:51 -07:00
gpio16xx.c ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
i2c.c ARM: OMAP1: Change interrupt numbering for sparse IRQ 2015-05-20 09:01:21 -07:00
id.c
io.c
iomap.h
irq.c ARM: OMAP1: Change interrupt numbering for sparse IRQ 2015-05-20 09:01:21 -07:00
Kconfig
lcd_dma.c ARM: OMAP1: Remove dma.h 2013-06-18 00:12:34 -07:00
Makefile
Makefile.boot
mcbsp.c ARM: OMAP1: Remove McBSP DMA channel definitions 2013-06-18 00:12:34 -07:00
mmc.h
mux.c ARM: OMAP1: Fix section mismatch warnings for omap_cfg_reg 2015-05-21 14:50:23 -07:00
ocpi.c omap16xx: Removes fixme no longer needed in ocpi_enable() 2014-07-08 01:15:36 -07:00
opp.h
opp_data.c
pm.c ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
pm.h
pm_bus.c ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM 2014-12-13 00:42:49 +01:00
reset.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
serial.c ARM: OMAP1: Fix randconfig builds if ARCH_OMAP15XX not selected 2015-05-21 14:50:23 -07:00
sleep.S
soc.h
sram-init.c
sram.h
sram.S
time.c ARM: OMAP1: Switch to sched_clock_register() 2013-11-21 15:41:00 -08:00
timer.c ARM: OMAP1: Change interrupt numbering for sparse IRQ 2015-05-20 09:01:21 -07:00
timer32k.c ARM: OMAP1: timer32k.c: Remove unused function 2015-01-07 09:53:51 -08:00
usb.c