linux/drivers/net/wireless/intel/iwlwifi/dvm/led.c
Luca Coelho 79b6c8feb6 iwlwifi: separate elements from cfg that are needed by trans_alloc
In order to be able to select the cfg depending on the HW revision or
on the RF ID, we need to set up the trans before selecting the cfg.
To do so, move the elements from cfg that are needed by
iwl_trans_alloc() to a separate struct at the top of the cfg, so it
can be used by other cfg types as well, before selecting the rest of
the configuration.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-09-06 15:34:25 +03:00

210 lines
5.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/******************************************************************************
*
* Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved.
* Copyright (C) 2019 Intel Corporation
*
* Contact Information:
* Intel Linux Wireless <linuxwifi@intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-io.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
#include "dev.h"
#include "agn.h"
/* Throughput OFF time(ms) ON time (ms)
* >300 25 25
* >200 to 300 40 40
* >100 to 200 55 55
* >70 to 100 65 65
* >50 to 70 75 75
* >20 to 50 85 85
* >10 to 20 95 95
* >5 to 10 110 110
* >1 to 5 130 130
* >0 to 1 167 167
* <=0 SOLID ON
*/
static const struct ieee80211_tpt_blink iwl_blink[] = {
{ .throughput = 0, .blink_time = 334 },
{ .throughput = 1 * 1024 - 1, .blink_time = 260 },
{ .throughput = 5 * 1024 - 1, .blink_time = 220 },
{ .throughput = 10 * 1024 - 1, .blink_time = 190 },
{ .throughput = 20 * 1024 - 1, .blink_time = 170 },
{ .throughput = 50 * 1024 - 1, .blink_time = 150 },
{ .throughput = 70 * 1024 - 1, .blink_time = 130 },
{ .throughput = 100 * 1024 - 1, .blink_time = 110 },
{ .throughput = 200 * 1024 - 1, .blink_time = 80 },
{ .throughput = 300 * 1024 - 1, .blink_time = 50 },
};
/* Set led register off */
void iwlagn_led_enable(struct iwl_priv *priv)
{
iwl_write32(priv->trans, CSR_LED_REG, CSR_LED_REG_TURN_ON);
}
/*
* Adjust led blink rate to compensate on a MAC Clock difference on every HW
* Led blink rate analysis showed an average deviation of 20% on 5000 series
* and up.
* Need to compensate on the led on/off time per HW according to the deviation
* to achieve the desired led frequency
* The calculation is: (100-averageDeviation)/100 * blinkTime
* For code efficiency the calculation will be:
* compensation = (100 - averageDeviation) * 64 / 100
* NewBlinkTime = (compensation * BlinkTime) / 64
*/
static inline u8 iwl_blink_compensation(struct iwl_priv *priv,
u8 time, u16 compensation)
{
if (!compensation) {
IWL_ERR(priv, "undefined blink compensation: "
"use pre-defined blinking time\n");
return time;
}
return (u8)((time * compensation) >> 6);
}
static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd)
{
struct iwl_host_cmd cmd = {
.id = REPLY_LEDS_CMD,
.len = { sizeof(struct iwl_led_cmd), },
.data = { led_cmd, },
.flags = CMD_ASYNC,
};
u32 reg;
reg = iwl_read32(priv->trans, CSR_LED_REG);
if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
iwl_write32(priv->trans, CSR_LED_REG,
reg & CSR_LED_BSM_CTRL_MSK);
return iwl_dvm_send_cmd(priv, &cmd);
}
/* Set led pattern command */
static int iwl_led_cmd(struct iwl_priv *priv,
unsigned long on,
unsigned long off)
{
struct iwl_led_cmd led_cmd = {
.id = IWL_LED_LINK,
.interval = IWL_DEF_LED_INTRVL
};
int ret;
if (!test_bit(STATUS_READY, &priv->status))
return -EBUSY;
if (priv->blink_on == on && priv->blink_off == off)
return 0;
if (off == 0) {
/* led is SOLID_ON */
on = IWL_LED_SOLID;
}
led_cmd.on = iwl_blink_compensation(priv, on,
priv->cfg->trans.base_params->led_compensation);
led_cmd.off = iwl_blink_compensation(priv, off,
priv->cfg->trans.base_params->led_compensation);
ret = iwl_send_led_cmd(priv, &led_cmd);
if (!ret) {
priv->blink_on = on;
priv->blink_off = off;
}
return ret;
}
static void iwl_led_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct iwl_priv *priv = container_of(led_cdev, struct iwl_priv, led);
unsigned long on = 0;
unsigned long off = 0;
if (brightness > 0)
on = IWL_LED_SOLID;
else
off = IWL_LED_SOLID;
iwl_led_cmd(priv, on, off);
}
static int iwl_led_blink_set(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
struct iwl_priv *priv = container_of(led_cdev, struct iwl_priv, led);
return iwl_led_cmd(priv, *delay_on, *delay_off);
}
void iwl_leds_init(struct iwl_priv *priv)
{
int mode = iwlwifi_mod_params.led_mode;
int ret;
if (mode == IWL_LED_DISABLE) {
IWL_INFO(priv, "Led disabled\n");
return;
}
if (mode == IWL_LED_DEFAULT)
mode = priv->cfg->led_mode;
priv->led.name = kasprintf(GFP_KERNEL, "%s-led",
wiphy_name(priv->hw->wiphy));
priv->led.brightness_set = iwl_led_brightness_set;
priv->led.blink_set = iwl_led_blink_set;
priv->led.max_brightness = 1;
switch (mode) {
case IWL_LED_DEFAULT:
WARN_ON(1);
break;
case IWL_LED_BLINK:
priv->led.default_trigger =
ieee80211_create_tpt_led_trigger(priv->hw,
IEEE80211_TPT_LEDTRIG_FL_CONNECTED,
iwl_blink, ARRAY_SIZE(iwl_blink));
break;
case IWL_LED_RF_STATE:
priv->led.default_trigger =
ieee80211_get_radio_led_name(priv->hw);
break;
}
ret = led_classdev_register(priv->trans->dev, &priv->led);
if (ret) {
kfree(priv->led.name);
return;
}
priv->led_registered = true;
}
void iwl_leds_exit(struct iwl_priv *priv)
{
if (!priv->led_registered)
return;
led_classdev_unregister(&priv->led);
kfree(priv->led.name);
}