mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-10-31 16:54:21 +00:00
da8d46992e
The Samsung Galaxy S5 uses a maxim17048 fuelgauge. The maxim,rcomp value is taken from downstream kernel. Model data and temperature-based compensation are not yet supported in the mainline driver, but the readings seem fine nevertheless. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Link: https://lore.kernel.org/r/20201126141144.1763779-1-iskren.chernev@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
747 lines
15 KiB
Text
747 lines
15 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
#include "qcom-msm8974pro.dtsi"
|
|
#include "qcom-pma8084.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
model = "Samsung Galaxy S5";
|
|
compatible = "samsung,klte", "qcom,msm8974";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart1;
|
|
sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
|
|
sdhc2 = &sdhc_2; /* SDC2 SD card slot */
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
smd {
|
|
rpm {
|
|
rpm_requests {
|
|
pma8084-regulators {
|
|
compatible = "qcom,rpm-pma8084-regulators";
|
|
status = "okay";
|
|
|
|
pma8084_s1: s1 {
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
pma8084_s2: s2 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
pma8084_s3: s3 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
pma8084_s4: s4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pma8084_s5: s5 {
|
|
regulator-min-microvolt = <2150000>;
|
|
regulator-max-microvolt = <2150000>;
|
|
};
|
|
|
|
pma8084_s6: s6 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
pma8084_l1: l1 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
pma8084_l2: l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
pma8084_l3: l3 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
pma8084_l4: l4 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
pma8084_l5: l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pma8084_l6: l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pma8084_l7: l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pma8084_l8: l8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pma8084_l9: l9 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
pma8084_l10: l10 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
pma8084_l11: l11 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
pma8084_l12: l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pma8084_l13: l13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
pma8084_l14: l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pma8084_l15: l15 {
|
|
regulator-min-microvolt = <2050000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
pma8084_l16: l16 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
pma8084_l17: l17 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
pma8084_l18: l18 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
pma8084_l19: l19 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
pma8084_l20: l20 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <200000>;
|
|
};
|
|
|
|
pma8084_l21: l21 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
|
|
regulator-allow-set-load;
|
|
regulator-system-load = <200000>;
|
|
};
|
|
|
|
pma8084_l22: l22 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
pma8084_l23: l23 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
pma8084_l24: l24 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
};
|
|
|
|
pma8084_l25: l25 {
|
|
regulator-min-microvolt = <2100000>;
|
|
regulator-max-microvolt = <2100000>;
|
|
};
|
|
|
|
pma8084_l26: l26 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
pma8084_l27: l27 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
pma8084_lvs1: lvs1 {};
|
|
pma8084_lvs2: lvs2 {};
|
|
pma8084_lvs3: lvs3 {};
|
|
pma8084_lvs4: lvs4 {};
|
|
|
|
pma8084_5vs1: 5vs1 {};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c-gpio-touchkey {
|
|
compatible = "i2c-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
sda-gpios = <&msmgpio 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&msmgpio 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c_touchkey_pins>;
|
|
|
|
touchkey@20 {
|
|
compatible = "cypress,tm2-touchkey";
|
|
reg = <0x20>;
|
|
|
|
interrupt-parent = <&pma8084_gpios>;
|
|
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&touchkey_pin>;
|
|
|
|
vcc-supply = <&max77826_ldo15>;
|
|
vdd-supply = <&pma8084_l19>;
|
|
|
|
linux,keycodes = <KEY_APPSELECT KEY_BACK>;
|
|
};
|
|
};
|
|
|
|
i2c-gpio-led {
|
|
compatible = "i2c-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
scl-gpios = <&msmgpio 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
sda-gpios = <&msmgpio 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c_led_gpioex_pins>;
|
|
|
|
i2c-gpio,delay-us = <2>;
|
|
|
|
gpio_expander: gpio@20 {
|
|
compatible = "nxp,pcal6416";
|
|
reg = <0x20>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
vcc-supply = <&pma8084_s4>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpioex_pin>;
|
|
|
|
reset-gpios = <&msmgpio 145 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-controller@30 {
|
|
compatible = "panasonic,an30259a";
|
|
reg = <0x30>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@1 {
|
|
reg = <1>;
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_RED>;
|
|
};
|
|
|
|
led@2 {
|
|
reg = <2>;
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
};
|
|
|
|
led@3 {
|
|
reg = <3>;
|
|
function = LED_FUNCTION_STATUS;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vreg_wlan: wlan-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "wl-reg";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
/delete-node/ vreg-boost;
|
|
};
|
|
|
|
&soc {
|
|
serial@f991e000 {
|
|
status = "ok";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
input-name = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_pin_a>;
|
|
|
|
volume-down {
|
|
label = "volume_down";
|
|
gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
home-key {
|
|
label = "home_key";
|
|
gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_HOMEPAGE>;
|
|
wakeup-source;
|
|
debounce-interval = <15>;
|
|
};
|
|
|
|
volume-up {
|
|
label = "volume_up";
|
|
gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
debounce-interval = <15>;
|
|
};
|
|
};
|
|
|
|
pinctrl@fd510000 {
|
|
sdhc1_pin_a: sdhc1-pin-active {
|
|
clk {
|
|
pins = "sdc1_clk";
|
|
drive-strength = <4>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc1_cmd", "sdc1_data";
|
|
drive-strength = <4>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdhc2_pin_a: sdhc2-pin-active {
|
|
clk-cmd-data {
|
|
pins = "gpio35", "gpio36", "gpio37", "gpio38",
|
|
"gpio39", "gpio40";
|
|
function = "sdc3";
|
|
drive-strength = <8>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdhc2_cd_pin: sdhc2-cd {
|
|
pins = "gpio62";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
sdhc3_pin_a: sdhc3-pin-active {
|
|
clk {
|
|
pins = "sdc2_clk";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc2_cmd", "sdc2_data";
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
i2c2_pins: i2c2 {
|
|
mux {
|
|
pins = "gpio6", "gpio7";
|
|
function = "blsp_i2c2";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c6_pins: i2c6 {
|
|
mux {
|
|
pins = "gpio29", "gpio30";
|
|
function = "blsp_i2c6";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c12_pins: i2c12 {
|
|
mux {
|
|
pins = "gpio87", "gpio88";
|
|
function = "blsp_i2c12";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
i2c_touchkey_pins: i2c-touchkey {
|
|
mux {
|
|
pins = "gpio95", "gpio96";
|
|
function = "gpio";
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
i2c_led_gpioex_pins: i2c-led-gpioex {
|
|
mux {
|
|
pins = "gpio120", "gpio121";
|
|
function = "gpio";
|
|
input-enable;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
gpioex_pin: gpioex {
|
|
res {
|
|
pins = "gpio145";
|
|
function = "gpio";
|
|
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
|
|
wifi_pin: wifi {
|
|
int {
|
|
pins = "gpio92";
|
|
function = "gpio";
|
|
|
|
input-enable;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
};
|
|
|
|
sdhc_1: sdhci@f9824900 {
|
|
status = "ok";
|
|
|
|
vmmc-supply = <&pma8084_l20>;
|
|
vqmmc-supply = <&pma8084_s4>;
|
|
|
|
bus-width = <8>;
|
|
non-removable;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc1_pin_a>;
|
|
};
|
|
|
|
sdhc_2: sdhci@f9864900 {
|
|
status = "ok";
|
|
|
|
max-frequency = <100000000>;
|
|
|
|
vmmc-supply = <&pma8084_l21>;
|
|
vqmmc-supply = <&pma8084_l13>;
|
|
|
|
bus-width = <4>;
|
|
|
|
/* cd-gpio is intentionally disabled. If enabled, an SD card
|
|
* present during boot is not initialized correctly. Without
|
|
* cd-gpios the driver resorts to polling, so hotplug works.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
|
|
// cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
sdhci@f98a4900 {
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
max-frequency = <100000000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdhc3_pin_a>;
|
|
|
|
vmmc-supply = <&vreg_wlan>;
|
|
vqmmc-supply = <&pma8084_s4>;
|
|
|
|
bus-width = <4>;
|
|
non-removable;
|
|
|
|
wifi@1 {
|
|
reg = <1>;
|
|
compatible = "brcm,bcm4329-fmac";
|
|
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "host-wake";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
|
|
};
|
|
};
|
|
|
|
usb@f9a55000 {
|
|
status = "ok";
|
|
|
|
phys = <&usb_hs1_phy>;
|
|
phy-select = <&tcsr 0xb000 0>;
|
|
/*extcon = <&smbb>, <&usb_id>;*/
|
|
/*vbus-supply = <&chg_otg>;*/
|
|
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
|
|
ulpi {
|
|
phy@a {
|
|
status = "ok";
|
|
|
|
v1p8-supply = <&pma8084_l6>;
|
|
v3p3-supply = <&pma8084_l24>;
|
|
|
|
/*extcon = <&smbb>;*/
|
|
qcom,init-seq = /bits/ 8 <0x1 0x64>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@f9924000 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
|
|
touchscreen@20 {
|
|
compatible = "syna,rmi4-i2c";
|
|
reg = <0x20>;
|
|
|
|
interrupt-parent = <&pma8084_gpios>;
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
vdd-supply = <&max77826_ldo13>;
|
|
vio-supply = <&pma8084_lvs2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&touch_pin>;
|
|
|
|
syna,startup-delay-ms = <100>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rmi4-f01@1 {
|
|
reg = <0x1>;
|
|
syna,nosleep-mode = <1>;
|
|
};
|
|
|
|
rmi4-f12@12 {
|
|
reg = <0x12>;
|
|
syna,sensor-type = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@f9928000 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6_pins>;
|
|
|
|
pmic@60 {
|
|
reg = <0x60>;
|
|
compatible = "maxim,max77826";
|
|
|
|
regulators {
|
|
max77826_ldo1: LDO1 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
max77826_ldo2: LDO2 {
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
};
|
|
|
|
max77826_ldo3: LDO3 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
max77826_ldo4: LDO4 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
max77826_ldo5: LDO5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
max77826_ldo6: LDO6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
max77826_ldo7: LDO7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
max77826_ldo8: LDO8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
max77826_ldo9: LDO9 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
max77826_ldo10: LDO10 {
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
max77826_ldo11: LDO11 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
max77826_ldo12: LDO12 {
|
|
regulator-min-microvolt = <2500000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
max77826_ldo13: LDO13 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
max77826_ldo14: LDO14 {
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
max77826_ldo15: LDO15 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
max77826_buck: BUCK {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
max77826_buckboost: BUCKBOOST {
|
|
regulator-min-microvolt = <3400000>;
|
|
regulator-max-microvolt = <3400000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
i2c@f9968000 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c12_pins>;
|
|
|
|
fuelgauge@36 {
|
|
compatible = "maxim,max17048";
|
|
reg = <0x36>;
|
|
|
|
maxim,double-soc;
|
|
maxim,rcomp = /bits/ 8 <0x56>;
|
|
|
|
interrupt-parent = <&pma8084_gpios>;
|
|
interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fuelgauge_pin>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spmi_bus {
|
|
pma8084@0 {
|
|
gpios@c000 {
|
|
gpio_keys_pin_a: gpio-keys-active {
|
|
pins = "gpio2", "gpio3", "gpio5";
|
|
function = "normal";
|
|
|
|
bias-pull-up;
|
|
power-source = <PMA8084_GPIO_S4>;
|
|
};
|
|
|
|
touchkey_pin: touchkey-int-pin {
|
|
pins = "gpio6";
|
|
function = "normal";
|
|
bias-disable;
|
|
input-enable;
|
|
power-source = <PMA8084_GPIO_S4>;
|
|
};
|
|
|
|
touch_pin: touchscreen-int-pin {
|
|
pins = "gpio8";
|
|
function = "normal";
|
|
bias-disable;
|
|
input-enable;
|
|
power-source = <PMA8084_GPIO_S4>;
|
|
};
|
|
|
|
wlan_sleep_clk_pin: wlan-sleep-clk-pin {
|
|
pins = "gpio16";
|
|
function = "func2";
|
|
|
|
output-high;
|
|
power-source = <PMA8084_GPIO_S4>;
|
|
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
|
|
};
|
|
|
|
fuelgauge_pin: fuelgauge-int-pin {
|
|
pins = "gpio21";
|
|
function = "normal";
|
|
bias-disable;
|
|
input-enable;
|
|
power-source = <PMA8084_GPIO_S4>;
|
|
};
|
|
};
|
|
};
|
|
};
|