mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
6c0de59b3d
On SJA1105, there is support for a cascade port which is presumably connected to a downstream SJA1105 switch. The upstream one does not take PTP timestamps for packets received on this port, presumably because the downstream switch already did (and for PTP, it only makes sense for the leaf nodes in a DSA switch tree to do that). I haven't been able to validate that feature in a fully assembled setup, so I am disabling the feature by setting the cascade port to an unused port value (ds->num_ports). In SJA1110, multiple cascade ports are supported, and CASC_PORT became a bit mask from a port number. So when CASC_PORT is set to ds->num_ports (which is 11 on SJA1110), it is actually set to 0b1011, so ports 3, 1 and 0 are configured as cascade ports and we cannot take RX timestamps on them. So we need to introduce a check for SJA1110 and set things differently (to zero there), so that the cascading feature is properly disabled and RX timestamps can be taken on all ports. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|---|---|---|
| .. | ||
| b53 | ||
| hirschmann | ||
| microchip | ||
| mv88e6xxx | ||
| ocelot | ||
| qca | ||
| sja1105 | ||
| xrs700x | ||
| bcm_sf2.c | ||
| bcm_sf2.h | ||
| bcm_sf2_cfp.c | ||
| bcm_sf2_regs.h | ||
| dsa_loop.c | ||
| dsa_loop.h | ||
| dsa_loop_bdinfo.c | ||
| Kconfig | ||
| lan9303-core.c | ||
| lan9303.h | ||
| lan9303_i2c.c | ||
| lan9303_mdio.c | ||
| lantiq_gswip.c | ||
| lantiq_pce.h | ||
| Makefile | ||
| mt7530.c | ||
| mt7530.h | ||
| mv88e6060.c | ||
| mv88e6060.h | ||
| qca8k.c | ||
| qca8k.h | ||
| realtek-smi-core.c | ||
| realtek-smi-core.h | ||
| rtl8366.c | ||
| rtl8366rb.c | ||
| vitesse-vsc73xx-core.c | ||
| vitesse-vsc73xx-platform.c | ||
| vitesse-vsc73xx-spi.c | ||
| vitesse-vsc73xx.h | ||