Paul Kocialkowski 686d263856 drm/sun4i: Cleanup video/YUV source before enabling a layer ... This adds a dedicated function for cleaning the video and YUV source channel layer enable bits. This function is called first on layer atomic update to make sure that there are no leftover bits from previous plane configuration that were not cleaned until now. It fixes issues when alternating between video and YUV planes, where both bits would be set eventually, leading to broken plane display. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-2-paul.kocialkowski@bootlin.com		2018-11-27 09:30:42 +01:00
..
Kconfig	drm/sun4i: fix build failure with CONFIG_DRM_SUN8I_MIXER=m	2018-07-12 09:35:19 +02:00
Makefile	BackMerge v4.18-rc7 into drm-next	2018-07-30 10:39:22 +10:00
sun4i_backend.c	drm/sun4i: Cleanup video/YUV source before enabling a layer	2018-11-27 09:30:42 +01:00
sun4i_backend.h	drm/sun4i: Cleanup video/YUV source before enabling a layer	2018-11-27 09:30:42 +01:00
sun4i_crtc.c
sun4i_crtc.h
sun4i_dotclock.c	drm/sun4i: Fix an ulong overflow in the dotclock driver	2018-10-19 11:50:25 +02:00
sun4i_dotclock.h
sun4i_drv.c	drm/sun4i: Use drm_fbdev_generic_setup()	2018-11-01 15:25:11 +01:00
sun4i_drv.h
sun4i_framebuffer.c	drm/sun4i: Use drm_fbdev_generic_setup()	2018-11-01 15:25:11 +01:00
sun4i_framebuffer.h	drm/sun4i: Use drm_fbdev_generic_setup()	2018-11-01 15:25:11 +01:00
sun4i_frontend.c
sun4i_frontend.h
sun4i_hdmi.h
sun4i_hdmi_ddc_clk.c
sun4i_hdmi_enc.c	drm: drop _mode_ from drm_mode_connector_attach_encoder	2018-07-13 18:40:27 +02:00
sun4i_hdmi_i2c.c
sun4i_hdmi_tmds_clk.c	drm/sun4i: hdmi: Fix double flag assignation	2018-10-29 14:19:51 +01:00
sun4i_layer.c	drm/sun4i: Cleanup video/YUV source before enabling a layer	2018-11-27 09:30:42 +01:00
sun4i_layer.h
sun4i_lvds.c	drm/sun4i: tcon: fix check of tcon->panel null pointer	2018-10-08 11:20:50 +02:00
sun4i_lvds.h
sun4i_rgb.c	drm/sun4i: tcon: fix check of tcon->panel null pointer	2018-10-08 11:20:50 +02:00
sun4i_rgb.h
sun4i_tcon.c	drm/sun4i: tcon: Support an active-low DE signal with RGB interface	2018-11-09 08:31:28 +01:00
sun4i_tcon.h	drm/sun4i: tcon: Support an active-low DE signal with RGB interface	2018-11-09 08:31:28 +01:00
sun4i_tv.c	drm: drop _mode_ from drm_mode_connector_attach_encoder	2018-07-13 18:40:27 +02:00
sun6i_drc.c
sun6i_mipi_dphy.c
sun6i_mipi_dsi.c	drm: drop _mode_ from drm_mode_connector_attach_encoder	2018-07-13 18:40:27 +02:00
sun6i_mipi_dsi.h
sun8i_csc.c	drm/sun4i: Add basic support for DE3	2018-11-05 11:48:23 +01:00
sun8i_csc.h
sun8i_dw_hdmi.c	drm/sun4i: Add support for Synopsys HDMI PHY	2018-11-05 11:49:05 +01:00
sun8i_dw_hdmi.h	drm/sun4i: Add support for Synopsys HDMI PHY	2018-11-05 11:49:05 +01:00
sun8i_hdmi_phy.c	drm/sun4i: Add support for H6 HDMI PHY	2018-11-05 11:49:05 +01:00
sun8i_hdmi_phy_clk.c
sun8i_mixer.c	drm/sun4i: Add support for H6 DE3 mixer 0	2018-11-05 11:49:03 +01:00
sun8i_mixer.h	drm/sun4i: Add basic support for DE3	2018-11-05 11:48:23 +01:00
sun8i_tcon_top.c	drm: sun4i: add support for H6 TCON TOP	2018-11-05 11:49:06 +01:00
sun8i_tcon_top.h	drm/sun4i: tcon-top: Add helpers for mux switching	2018-07-11 09:54:54 +02:00
sun8i_ui_layer.c	drm/sun4i: wait on implicit fence before display	2018-11-22 10:07:26 +01:00
sun8i_ui_layer.h	drm/sun4i: Rework DE2 register defines	2018-11-05 10:34:43 +01:00
sun8i_ui_scaler.c	drm/sun4i: Add basic support for DE3	2018-11-05 11:48:23 +01:00
sun8i_ui_scaler.h	drm/sun4i: Add basic support for DE3	2018-11-05 11:48:23 +01:00
sun8i_vi_layer.c	drm/sun4i: wait on implicit fence before display	2018-11-22 10:07:26 +01:00
sun8i_vi_layer.h	drm/sun4i: Add basic support for DE3	2018-11-05 11:48:23 +01:00
sun8i_vi_scaler.c	drm/sun4i: Add basic support for DE3	2018-11-05 11:48:23 +01:00
sun8i_vi_scaler.h	drm/sun4i: Add basic support for DE3	2018-11-05 11:48:23 +01:00
sunxi_engine.h