mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-04 00:06:36 +00:00
5169a9851d
Add support for issuing PERST via GPIO specified in 'reset-gpios' property (as described in PCI device tree bindings). Some buggy cards (e.g. Compex WLE900VX or WLE1216) are not detected after reboot when PERST is not issued during driver initialization. If bootloader already enabled link training then issuing PERST has no effect for some buggy cards (e.g. Compex WLE900VX) and these cards are not detected. We therefore clear the LINK_TRAINING_EN register before. It was observed that Compex WLE900VX card needs to be in PERST reset for at least 10ms if bootloader enabled link training. Tested on Turris MOX. Link: https://lore.kernel.org/r/20200430080625.26070-6-pali@kernel.org Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com> Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> |
||
|---|---|---|
| .. | ||
| cadence | ||
| dwc | ||
| mobiveil | ||
| Kconfig | ||
| Makefile | ||
| pci-aardvark.c | ||
| pci-ftpci100.c | ||
| pci-host-common.c | ||
| pci-host-generic.c | ||
| pci-hyperv-intf.c | ||
| pci-hyperv.c | ||
| pci-mvebu.c | ||
| pci-rcar-gen2.c | ||
| pci-tegra.c | ||
| pci-thunder-ecam.c | ||
| pci-thunder-pem.c | ||
| pci-v3-semi.c | ||
| pci-versatile.c | ||
| pci-xgene-msi.c | ||
| pci-xgene.c | ||
| pcie-altera-msi.c | ||
| pcie-altera.c | ||
| pcie-brcmstb.c | ||
| pcie-iproc-bcma.c | ||
| pcie-iproc-msi.c | ||
| pcie-iproc-platform.c | ||
| pcie-iproc.c | ||
| pcie-iproc.h | ||
| pcie-mediatek.c | ||
| pcie-rcar.c | ||
| pcie-rockchip-ep.c | ||
| pcie-rockchip-host.c | ||
| pcie-rockchip.c | ||
| pcie-rockchip.h | ||
| pcie-tango.c | ||
| pcie-xilinx-nwl.c | ||
| pcie-xilinx.c | ||
| vmd.c | ||