public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-11-01 09:13:37 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
Primoz Fiser 8cc9c75923 arm64: dts: freescale: imx93-phyboard-nash: Move ADC vref to SoM 
Move configuration for ADC voltage reference from board DTS to a SoM
include file. The SoC ADC reference voltage is connected to a "VDDA_1V8"
voltage node and supplied by the PMIC's BUCK5 regulator. The reference
voltage is thus defined by the SoM and cannot be changed by the carrier
board design and as such belongs into the SoM include file.

Moreover, with this in place, customers designing own carrier boards can
simply include imx93-phycore-som.dtsi and enable adc1 in their own DTS
without the need to define dummy ADC vref regulator themselves anymore.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2025-07-01 21:05:32 +08:00

308 lines
7 KiB
Text
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2025 PHYTEC Messtechnik GmbH
* Author: Primoz Fiser <primoz.fiser@norik.com>
*
* Product homepage:
* https://www.phytec.eu/en/produkte/development-kits/phyboard-nash/
*/
/dts-v1/;
#include <dt-bindings/net/ti-dp83867.h>
#include "imx93-phycore-som.dtsi"
/ {
model = "PHYTEC phyBOARD-Nash-i.MX93";
compatible = "phytec,imx93-phyboard-nash", "phytec,imx93-phycore-som",
"fsl,imx93";
aliases {
ethernet1 = &eqos;
rtc0 = &i2c_rtc;
rtc1 = &bbnsm_rtc;
};
chosen {
stdout-path = &lpuart1;
};
flexcan1_tc: can-phy0 {
compatible = "ti,tcan1042";
#phy-cells = <0>;
max-bitrate = <8000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1_tc>;
standby-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VCC_SD";
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
};
reg_vcc_1v8: regulator-vcc-1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC1V8";
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
};
};
/* ADC */
&adc1 {
status = "okay";
};
/* Ethernet */
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy2>;
status = "okay";
};
&mdio {
ethphy2: ethernet-phy@2 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <2>;
interrupt-parent = <&gpio3>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_75_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
};
};
/* CAN */
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
phys = <&flexcan1_tc>;
status = "okay";
};
/* I2C2 */
&lpi2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpi2c2>;
status = "okay";
/* RTC */
i2c_rtc: rtc@52 {
compatible = "microcrystal,rv3028";
reg = <0x52>;
interrupt-parent = <&gpio4>;
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
trickle-resistor-ohms = <3000>;
wakeup-source;
};
/* EEPROM */
eeprom@54 {
compatible = "atmel,24c32";
reg = <0x54>;
pagesize = <32>;
vcc-supply = <&reg_vcc_1v8>;
};
};
/* SPI6 */
&lpspi6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpspi6>;
cs-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
status = "okay";
/* TPM */
tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm>;
spi-max-frequency = <10000000>;
};
};
/* Console */
&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* RS-232/RS-485 */
&lpuart7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart7>;
status = "okay";
};
/* USB */
&usbotg1 {
disable-over-current;
dr_mode = "otg";
status = "okay";
};
&usbotg2 {
disable-over-current;
dr_mode = "host";
status = "okay";
};
/* SD-Card */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2_default>, <&pinctrl_usdhc2_cd>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
disable-wp;
no-mmc;
no-sdio;
status = "okay";
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e
MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x50e
MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x50e
MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x50e
MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1002
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
MX93_PAD_PDM_CLK__CAN1_TX 0x1382
>;
};
pinctrl_flexcan1_tc: flexcan1tcgrp {
fsl,pins = <
MX93_PAD_ENET2_TD3__GPIO4_IO16 0x31e
>;
};
pinctrl_lpi2c2: lpi2c2grp {
fsl,pins = <
MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e
MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e
>;
};
pinctrl_lpspi6: lpspi6grp {
fsl,pins = <
MX93_PAD_GPIO_IO00__GPIO2_IO00 0x386
MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x3fe
MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x386
MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x386
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
>;
};
pinctrl_rtc: rtcgrp {
fsl,pins = <
MX93_PAD_ENET2_RD2__GPIO4_IO26 0x31e
>;
};
pinctrl_tpm: tpmgrp {
fsl,pins = <
MX93_PAD_GPIO_IO17__GPIO2_IO17 0x31e
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
MX93_PAD_UART1_TXD__LPUART1_TX 0x30e
>;
};
pinctrl_uart7: uart7grp {
fsl,pins = <
MX93_PAD_GPIO_IO08__LPUART7_TX 0x30e
MX93_PAD_GPIO_IO09__LPUART7_RX 0x31e
MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x31e
MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x31e
>;
};
pinctrl_usdhc2_cd: usdhc2cdgrp {
fsl,pins = <
MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_default: usdhc2grp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000178e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x40001386
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x40001386
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x40001386
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000138e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x400013be
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x159e
MX93_PAD_SD2_CMD__USDHC2_CMD 0x4000139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x4000139e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x4000139e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x4000139e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x4000139e
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e
>;
};
};
Reference in a new issue View git blame Copy permalink