Raja Mani 373b48cfe7 ath10k: enable vdev and peer related operations for 10.4 fw ... Most of existing vdev and peer related functions (vdev create, vdev delete, vdev start, peer create, peer delete, peer flush, etc) are reusable for 10.4 firmware. Link those general vdev and peer functions to 10.4 wmi function table. Existing general pktlog enable/disable, dbglog configuration functions are reusable for 10.4 and add them also in wmi function table. Also handle few wmi events (sevice rdy, echo, dbg msg, tbtt offset update, dbg print) in ath10k_wmi_10_4_op_rx(). wow event is not applicable in 10.4 firmware, have it under not implemented print. Signed-off-by: Raja Mani <rmani@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>		2015-07-02 08:47:14 +03:00
..
bmi.c
bmi.h	ath10k: Fix BMI communication timeout for QCA99X0	2015-06-30 15:12:46 +03:00
ce.c	ath10k: Extend CE src desc flags for interrupt indication	2015-06-30 15:12:44 +03:00
ce.h	ath10k: Extend CE src desc flags for interrupt indication	2015-06-30 15:12:44 +03:00
core.c	ath10k: fill 10.4 fw wmi init cmd default values	2015-06-30 15:31:12 +03:00
core.h	ath10k: handle 10.4 firmware wmi swba event	2015-07-02 08:47:12 +03:00
debug.c	ath10k: print htt op_version upon driver boot	2015-06-16 13:06:47 +03:00
debug.h	ath10k: enable pci soc powersaving	2015-05-22 13:39:28 +03:00
debugfs_sta.c
hif.h
htc.c	ath10k: replenish htc tx credits always	2015-04-09 14:58:16 +03:00
htc.h
htt.c	ath10k: fix HTT op backwards compatibility for QCA6174	2015-03-30 14:56:06 +03:00
htt.h	ath10k: fix no-ack frame status	2015-04-09 15:11:30 +03:00
htt_rx.c	ath10k: remove unused variable hdr in ath10k_htt_rx_h_undecap()	2015-06-16 13:12:19 +03:00
htt_tx.c	ath10k: rework tx queue locking	2015-04-01 20:31:00 +03:00
hw.c	ath10k: Extend CE src desc flags for interrupt indication	2015-06-30 15:12:44 +03:00
hw.h	ath10k: adjust default peer limits if qcache enabled in 10.4 fw	2015-06-30 15:31:15 +03:00
Kconfig
mac.c	ath10k: include new wmi op version for 10.4 fw	2015-06-30 15:31:01 +03:00
mac.h	ath10k: implement tx pause wmi event	2015-04-01 20:31:08 +03:00
Makefile	ath10k: Add support for code swap	2015-06-30 15:12:47 +03:00
p2p.c
p2p.h
pci.c	ath10k: Add chip reset sequence for QCA99X0	2015-06-30 15:12:42 +03:00
pci.h	ath10k: Make target cpu address to CE address conversion chip specific	2015-06-30 15:12:40 +03:00
rx_desc.h	ath10k: add hw rate definitions	2015-03-30 15:09:15 +03:00
spectral.c	ath10k: increase relay buffer size of spectral scan	2015-05-11 17:50:42 +03:00
spectral.h
swap.c	ath10k: Add support for code swap	2015-06-30 15:12:47 +03:00
swap.h	ath10k: Add support for code swap	2015-06-30 15:12:47 +03:00
targaddrs.h	ath10k: Add hw register/values for QCA99X0 chip	2015-06-30 15:12:37 +03:00
testmode.c
testmode.h
testmode_i.h
thermal.c	ath10k: don't call quiet mode if it's not implemented	2015-04-01 20:21:17 +03:00
thermal.h	ath10k: configure thermal throttle while powering up	2015-03-23 17:16:37 +02:00
trace.c
trace.h	ath10k: add extra check for frame tracing	2015-04-17 09:33:48 +03:00
txrx.c	ath10k: txrx: remove unreachable negative return check and fixup type	2015-06-16 13:14:54 +03:00
txrx.h
wmi-ops.h	ath10k: implement adaptive qcs command	2015-04-01 20:30:52 +03:00
wmi-tlv.c	ath10k: enhance swba event handler to adapt different size tim bitmap	2015-07-02 08:47:11 +03:00
wmi-tlv.h	ath10k: implement tx pause wmi event	2015-04-01 20:31:08 +03:00
wmi.c	ath10k: enable vdev and peer related operations for 10.4 fw	2015-07-02 08:47:14 +03:00
wmi.h	ath10k: handle 10.4 firmware wmi swba event	2015-07-02 08:47:12 +03:00
wow.c	ath10k: add WOW patterns support	2015-03-30 09:10:24 +03:00
wow.h	ath10k: add WOW patterns support	2015-03-30 09:10:24 +03:00