mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-18 22:14:16 +00:00
2e11e78667
Aurelien reported probe failures due to the csi node being enabled
without having a camera attached to it. A camera was in the initial
submissions, but was removed from the dts, as it had not actually been
present on the board, but was from an addon board used by the
developer of the relevant drivers. The non-camera pipeline nodes were
not disabled when this happened and the probe failures are problematic
for Debian. Disable them.
CC: stable@vger.kernel.org
Fixes: 28ecaaa5af ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
662 lines
12 KiB
Text
662 lines
12 KiB
Text
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
|
/*
|
|
* Copyright (C) 2022 StarFive Technology Co., Ltd.
|
|
* Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "jh7110.dtsi"
|
|
#include "jh7110-pinfunc.h"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
i2c0 = &i2c0;
|
|
i2c2 = &i2c2;
|
|
i2c5 = &i2c5;
|
|
i2c6 = &i2c6;
|
|
mmc0 = &mmc0;
|
|
mmc1 = &mmc1;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x40000000 0x1 0x0>;
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
|
|
priority = <224>;
|
|
};
|
|
|
|
pwmdac_codec: audio-codec {
|
|
compatible = "linux,spdif-dit";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "StarFive-PWMDAC-Sound-Card";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
simple-audio-card,dai-link@0 {
|
|
reg = <0>;
|
|
format = "left_j";
|
|
bitclock-master = <&sndcpu0>;
|
|
frame-master = <&sndcpu0>;
|
|
|
|
sndcpu0: cpu {
|
|
sound-dai = <&pwmdac>;
|
|
};
|
|
|
|
codec {
|
|
sound-dai = <&pwmdac_codec>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&cpus {
|
|
timebase-frequency = <4000000>;
|
|
};
|
|
|
|
&dvp_clk {
|
|
clock-frequency = <74250000>;
|
|
};
|
|
|
|
&gmac0_rgmii_rxin {
|
|
clock-frequency = <125000000>;
|
|
};
|
|
|
|
&gmac0_rmii_refin {
|
|
clock-frequency = <50000000>;
|
|
};
|
|
|
|
&gmac1_rgmii_rxin {
|
|
clock-frequency = <125000000>;
|
|
};
|
|
|
|
&gmac1_rmii_refin {
|
|
clock-frequency = <50000000>;
|
|
};
|
|
|
|
&hdmitx0_pixelclk {
|
|
clock-frequency = <297000000>;
|
|
};
|
|
|
|
&i2srx_bclk_ext {
|
|
clock-frequency = <12288000>;
|
|
};
|
|
|
|
&i2srx_lrck_ext {
|
|
clock-frequency = <192000>;
|
|
};
|
|
|
|
&i2stx_bclk_ext {
|
|
clock-frequency = <12288000>;
|
|
};
|
|
|
|
&i2stx_lrck_ext {
|
|
clock-frequency = <192000>;
|
|
};
|
|
|
|
&mclk_ext {
|
|
clock-frequency = <12288000>;
|
|
};
|
|
|
|
&osc {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
&rtc_osc {
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
&tdm_ext {
|
|
clock-frequency = <49152000>;
|
|
};
|
|
|
|
&camss {
|
|
assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
|
|
<&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
|
|
assigned-clock-rates = <49500000>, <198000000>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
camss_from_csi2rx: endpoint {
|
|
remote-endpoint = <&csi2rx_to_camss>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&csi2rx {
|
|
assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
|
|
assigned-clock-rates = <297000000>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
/* remote MIPI sensor endpoint */
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
csi2rx_to_camss: endpoint {
|
|
remote-endpoint = <&camss_from_csi2rx>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&gmac0 {
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "snps,dwmac-mdio";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
clock-frequency = <100000>;
|
|
i2c-sda-hold-time-ns = <300>;
|
|
i2c-sda-falling-time-ns = <510>;
|
|
i2c-scl-falling-time-ns = <510>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <100000>;
|
|
i2c-sda-hold-time-ns = <300>;
|
|
i2c-sda-falling-time-ns = <510>;
|
|
i2c-scl-falling-time-ns = <510>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c5 {
|
|
clock-frequency = <100000>;
|
|
i2c-sda-hold-time-ns = <300>;
|
|
i2c-sda-falling-time-ns = <510>;
|
|
i2c-scl-falling-time-ns = <510>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_pins>;
|
|
status = "okay";
|
|
|
|
axp15060: pmic@36 {
|
|
compatible = "x-powers,axp15060";
|
|
reg = <0x36>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
regulators {
|
|
vcc_3v3: dcdc1 {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "vcc_3v3";
|
|
};
|
|
|
|
vdd_cpu: dcdc2 {
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1540000>;
|
|
regulator-name = "vdd-cpu";
|
|
};
|
|
|
|
emmc_vdd: aldo4 {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "emmc_vdd";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c6 {
|
|
clock-frequency = <100000>;
|
|
i2c-sda-hold-time-ns = <300>;
|
|
i2c-sda-falling-time-ns = <510>;
|
|
i2c-scl-falling-time-ns = <510>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c6_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
max-frequency = <100000000>;
|
|
assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
|
|
assigned-clock-rates = <50000000>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
mmc-ddr-1_8v;
|
|
mmc-hs200-1_8v;
|
|
cap-mmc-hw-reset;
|
|
post-power-on-delay-ms = <200>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins>;
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&emmc_vdd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
max-frequency = <100000000>;
|
|
assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
|
|
assigned-clock-rates = <50000000>;
|
|
bus-width = <4>;
|
|
no-sdio;
|
|
no-mmc;
|
|
cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
cap-sd-highspeed;
|
|
post-power-on-delay-ms = <200>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>;
|
|
phys = <&pciephy0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie0_pins>;
|
|
};
|
|
|
|
&pcie1 {
|
|
perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
|
|
phys = <&pciephy1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie1_pins>;
|
|
};
|
|
|
|
&pwmdac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwmdac_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&qspi {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
nor_flash: flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
cdns,read-delay = <5>;
|
|
spi-max-frequency = <12000000>;
|
|
cdns,tshsl-ns = <1>;
|
|
cdns,tsd2d-ns = <1>;
|
|
cdns,tchsh-ns = <1>;
|
|
cdns,tslch-ns = <1>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
spl@0 {
|
|
reg = <0x0 0xf0000>;
|
|
};
|
|
uboot-env@f0000 {
|
|
reg = <0xf0000 0x10000>;
|
|
};
|
|
uboot@100000 {
|
|
reg = <0x100000 0xf00000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi0_pins>;
|
|
status = "okay";
|
|
|
|
spi_dev0: spi@0 {
|
|
compatible = "rohm,dh2228fv";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
};
|
|
};
|
|
|
|
&syscrg {
|
|
assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>,
|
|
<&pllclk JH7110_PLLCLK_PLL0_OUT>;
|
|
assigned-clock-rates = <500000000>, <1500000000>;
|
|
};
|
|
|
|
&sysgpio {
|
|
i2c0_pins: i2c0-0 {
|
|
i2c-pins {
|
|
pinmux = <GPIOMUX(57, GPOUT_LOW,
|
|
GPOEN_SYS_I2C0_CLK,
|
|
GPI_SYS_I2C0_CLK)>,
|
|
<GPIOMUX(58, GPOUT_LOW,
|
|
GPOEN_SYS_I2C0_DATA,
|
|
GPI_SYS_I2C0_DATA)>;
|
|
bias-disable; /* external pull-up */
|
|
input-enable;
|
|
input-schmitt-enable;
|
|
};
|
|
};
|
|
|
|
i2c2_pins: i2c2-0 {
|
|
i2c-pins {
|
|
pinmux = <GPIOMUX(3, GPOUT_LOW,
|
|
GPOEN_SYS_I2C2_CLK,
|
|
GPI_SYS_I2C2_CLK)>,
|
|
<GPIOMUX(2, GPOUT_LOW,
|
|
GPOEN_SYS_I2C2_DATA,
|
|
GPI_SYS_I2C2_DATA)>;
|
|
bias-disable; /* external pull-up */
|
|
input-enable;
|
|
input-schmitt-enable;
|
|
};
|
|
};
|
|
|
|
i2c5_pins: i2c5-0 {
|
|
i2c-pins {
|
|
pinmux = <GPIOMUX(19, GPOUT_LOW,
|
|
GPOEN_SYS_I2C5_CLK,
|
|
GPI_SYS_I2C5_CLK)>,
|
|
<GPIOMUX(20, GPOUT_LOW,
|
|
GPOEN_SYS_I2C5_DATA,
|
|
GPI_SYS_I2C5_DATA)>;
|
|
bias-disable; /* external pull-up */
|
|
input-enable;
|
|
input-schmitt-enable;
|
|
};
|
|
};
|
|
|
|
i2c6_pins: i2c6-0 {
|
|
i2c-pins {
|
|
pinmux = <GPIOMUX(16, GPOUT_LOW,
|
|
GPOEN_SYS_I2C6_CLK,
|
|
GPI_SYS_I2C6_CLK)>,
|
|
<GPIOMUX(17, GPOUT_LOW,
|
|
GPOEN_SYS_I2C6_DATA,
|
|
GPI_SYS_I2C6_DATA)>;
|
|
bias-disable; /* external pull-up */
|
|
input-enable;
|
|
input-schmitt-enable;
|
|
};
|
|
};
|
|
|
|
mmc0_pins: mmc0-0 {
|
|
rst-pins {
|
|
pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST,
|
|
GPOEN_ENABLE,
|
|
GPI_NONE)>;
|
|
bias-pull-up;
|
|
drive-strength = <12>;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
|
|
mmc-pins {
|
|
pinmux = <PINMUX(64, 0)>,
|
|
<PINMUX(65, 0)>,
|
|
<PINMUX(66, 0)>,
|
|
<PINMUX(67, 0)>,
|
|
<PINMUX(68, 0)>,
|
|
<PINMUX(69, 0)>,
|
|
<PINMUX(70, 0)>,
|
|
<PINMUX(71, 0)>,
|
|
<PINMUX(72, 0)>,
|
|
<PINMUX(73, 0)>;
|
|
bias-pull-up;
|
|
drive-strength = <12>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
mmc1_pins: mmc1-0 {
|
|
clk-pins {
|
|
pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
|
|
GPOEN_ENABLE,
|
|
GPI_NONE)>;
|
|
bias-pull-up;
|
|
drive-strength = <12>;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
|
|
mmc-pins {
|
|
pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
|
|
GPOEN_SYS_SDIO1_CMD,
|
|
GPI_SYS_SDIO1_CMD)>,
|
|
<GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
|
|
GPOEN_SYS_SDIO1_DATA0,
|
|
GPI_SYS_SDIO1_DATA0)>,
|
|
<GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
|
|
GPOEN_SYS_SDIO1_DATA1,
|
|
GPI_SYS_SDIO1_DATA1)>,
|
|
<GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
|
|
GPOEN_SYS_SDIO1_DATA2,
|
|
GPI_SYS_SDIO1_DATA2)>,
|
|
<GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
|
|
GPOEN_SYS_SDIO1_DATA3,
|
|
GPI_SYS_SDIO1_DATA3)>;
|
|
bias-pull-up;
|
|
drive-strength = <12>;
|
|
input-enable;
|
|
input-schmitt-enable;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
|
|
pcie0_pins: pcie0-0 {
|
|
clkreq-pins {
|
|
pinmux = <GPIOMUX(27, GPOUT_LOW,
|
|
GPOEN_DISABLE,
|
|
GPI_NONE)>;
|
|
bias-pull-down;
|
|
drive-strength = <2>;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
|
|
wake-pins {
|
|
pinmux = <GPIOMUX(32, GPOUT_LOW,
|
|
GPOEN_DISABLE,
|
|
GPI_NONE)>;
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
|
|
pcie1_pins: pcie1-0 {
|
|
clkreq-pins {
|
|
pinmux = <GPIOMUX(29, GPOUT_LOW,
|
|
GPOEN_DISABLE,
|
|
GPI_NONE)>;
|
|
bias-pull-down;
|
|
drive-strength = <2>;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
|
|
wake-pins {
|
|
pinmux = <GPIOMUX(21, GPOUT_LOW,
|
|
GPOEN_DISABLE,
|
|
GPI_NONE)>;
|
|
bias-pull-up;
|
|
drive-strength = <2>;
|
|
input-enable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
|
|
pwmdac_pins: pwmdac-0 {
|
|
pwmdac-pins {
|
|
pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT,
|
|
GPOEN_ENABLE,
|
|
GPI_NONE)>,
|
|
<GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT,
|
|
GPOEN_ENABLE,
|
|
GPI_NONE)>;
|
|
bias-disable;
|
|
drive-strength = <2>;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
|
|
pwm_pins: pwm-0 {
|
|
pwm-pins {
|
|
pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
|
|
GPOEN_SYS_PWM0_CHANNEL0,
|
|
GPI_NONE)>,
|
|
<GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
|
|
GPOEN_SYS_PWM0_CHANNEL1,
|
|
GPI_NONE)>;
|
|
bias-disable;
|
|
drive-strength = <12>;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
|
|
spi0_pins: spi0-0 {
|
|
mosi-pins {
|
|
pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
|
|
GPOEN_ENABLE,
|
|
GPI_NONE)>;
|
|
bias-disable;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
miso-pins {
|
|
pinmux = <GPIOMUX(53, GPOUT_LOW,
|
|
GPOEN_DISABLE,
|
|
GPI_SYS_SPI0_RXD)>;
|
|
bias-pull-up;
|
|
input-enable;
|
|
input-schmitt-enable;
|
|
};
|
|
|
|
sck-pins {
|
|
pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
|
|
GPOEN_ENABLE,
|
|
GPI_SYS_SPI0_CLK)>;
|
|
bias-disable;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
};
|
|
|
|
ss-pins {
|
|
pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
|
|
GPOEN_ENABLE,
|
|
GPI_SYS_SPI0_FSS)>;
|
|
bias-disable;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
};
|
|
};
|
|
|
|
uart0_pins: uart0-0 {
|
|
tx-pins {
|
|
pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
|
|
GPOEN_ENABLE,
|
|
GPI_NONE)>;
|
|
bias-disable;
|
|
drive-strength = <12>;
|
|
input-disable;
|
|
input-schmitt-disable;
|
|
slew-rate = <0>;
|
|
};
|
|
|
|
rx-pins {
|
|
pinmux = <GPIOMUX(6, GPOUT_LOW,
|
|
GPOEN_DISABLE,
|
|
GPI_SYS_UART0_RX)>;
|
|
bias-disable; /* external pull-up */
|
|
drive-strength = <2>;
|
|
input-enable;
|
|
input-schmitt-enable;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0 {
|
|
dr_mode = "peripheral";
|
|
status = "okay";
|
|
};
|
|
|
|
&U74_1 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&U74_2 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&U74_3 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&U74_4 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|