mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-18 22:14:16 +00:00
20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
85 lines
1.9 KiB
YAML
85 lines
1.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
# Copyright (C) 2019-20 Texas Instruments Incorporated
|
|
%YAML 1.2
|
|
---
|
|
$id: "http://devicetree.org/schemas/sound/tas2770.yaml#"
|
|
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|
|
|
title: Texas Instruments TAS2770 Smart PA
|
|
|
|
maintainers:
|
|
- Shi Fu <shifu0704@thundersoft.com>
|
|
|
|
description: |
|
|
The TAS2770 is a mono, digital input Class-D audio amplifier optimized for
|
|
efficiently driving high peak power into small loudspeakers.
|
|
Integrated speaker voltage and current sense provides for
|
|
real time monitoring of loudspeaker behavior.
|
|
|
|
allOf:
|
|
- $ref: dai-common.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
enum:
|
|
- ti,tas2770
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description: |
|
|
I2C address of the device can be between 0x41 to 0x48.
|
|
|
|
reset-gpio:
|
|
maxItems: 1
|
|
description: GPIO used to reset the device.
|
|
|
|
shutdown-gpios:
|
|
maxItems: 1
|
|
description: GPIO used to control the state of the device.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
ti,imon-slot-no:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: TDM TX current sense time slot.
|
|
|
|
ti,vmon-slot-no:
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: TDM TX voltage sense time slot.
|
|
|
|
ti,asi-format:
|
|
deprecated: true
|
|
$ref: /schemas/types.yaml#/definitions/uint32
|
|
description: Sets TDM RX capture edge.
|
|
enum:
|
|
- 0 # Rising edge
|
|
- 1 # Falling edge
|
|
|
|
'#sound-dai-cells':
|
|
const: 1
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
codec: codec@41 {
|
|
compatible = "ti,tas2770";
|
|
reg = <0x41>;
|
|
#sound-dai-cells = <1>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <14>;
|
|
reset-gpio = <&gpio1 15 0>;
|
|
shutdown-gpios = <&gpio1 14 0>;
|
|
ti,imon-slot-no = <0>;
|
|
ti,vmon-slot-no = <2>;
|
|
};
|
|
};
|