mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-18 22:14:16 +00:00
20a72af11f
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
125 lines
2.7 KiB
YAML
125 lines
2.7 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/media/i2c/sony,imx214.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Sony 1/3.06-Inch 13.13MP CMOS Digital Image Sensor
|
|
|
|
maintainers:
|
|
- Ricardo Ribalda <ribalda@kernel.org>
|
|
|
|
description: |
|
|
The Sony IMX214 is a 1/3.06-inch CMOS active pixel digital image sensor with
|
|
an active array size of 4224H x 3200V. It is programmable through an I2C
|
|
interface. Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a
|
|
maximum throughput of 1.2Gbps/lane.
|
|
|
|
allOf:
|
|
- $ref: ../video-interface-devices.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: sony,imx214
|
|
|
|
reg:
|
|
enum:
|
|
- 0x10
|
|
- 0x1a
|
|
|
|
clocks:
|
|
description: Reference to the xclk clock.
|
|
maxItems: 1
|
|
|
|
clock-frequency:
|
|
description: Frequency of the xclk clock in Hz.
|
|
|
|
enable-gpios:
|
|
description: GPIO descriptor for the enable pin.
|
|
maxItems: 1
|
|
|
|
vdddo-supply:
|
|
description: Chip digital IO regulator (1.8V).
|
|
|
|
vdda-supply:
|
|
description: Chip analog regulator (2.7V).
|
|
|
|
vddd-supply:
|
|
description: Chip digital core regulator (1.12V).
|
|
|
|
flash-leds: true
|
|
lens-focus: true
|
|
|
|
port:
|
|
$ref: /schemas/graph.yaml#/$defs/port-base
|
|
description: |
|
|
Video output port.
|
|
|
|
properties:
|
|
endpoint:
|
|
$ref: /schemas/media/video-interfaces.yaml#
|
|
unevaluatedProperties: false
|
|
|
|
properties:
|
|
data-lanes:
|
|
anyOf:
|
|
- items:
|
|
- const: 1
|
|
- const: 2
|
|
- items:
|
|
- const: 1
|
|
- const: 2
|
|
- const: 3
|
|
- const: 4
|
|
|
|
link-frequencies: true
|
|
|
|
required:
|
|
- data-lanes
|
|
- link-frequencies
|
|
|
|
additionalProperties: false
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- clocks
|
|
- clock-frequency
|
|
- enable-gpios
|
|
- vdddo-supply
|
|
- vdda-supply
|
|
- vddd-supply
|
|
- port
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
i2c {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
camera-sensor@1a {
|
|
compatible = "sony,imx214";
|
|
reg = <0x1a>;
|
|
vdddo-supply = <&pm8994_lvs1>;
|
|
vddd-supply = <&camera_vddd_1v12>;
|
|
vdda-supply = <&pm8994_l17>;
|
|
lens-focus = <&ad5820>;
|
|
enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>;
|
|
clocks = <&camera_clk>;
|
|
clock-frequency = <24000000>;
|
|
|
|
port {
|
|
imx214_ep: endpoint {
|
|
data-lanes = <1 2 3 4>;
|
|
link-frequencies = /bits/ 64 <480000000>;
|
|
remote-endpoint = <&csiphy0_ep>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
...
|