mirror of
				git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
				synced 2025-10-31 16:54:21 +00:00 
			
		
		
		
	 d055c6a2cc
			
		
	
	
		d055c6a2cc
		
	
	
	
	
		
			
			Mark slow memcpy KUnit tests using test attributes. Tests marked as slow are as follows: memcpy_large_test, memmove_test, memmove_large_test, and memmove_overlap_test. These tests were the slowest of the memcpy tests and relatively slower to most other KUnit tests. Most of these tests are already skipped when CONFIG_MEMCPY_SLOW_KUNIT_TEST is not enabled. These tests can now be filtered using the KUnit test attribute filtering feature. Example: --filter "speed>slow". This will run only the tests that have speeds faster than slow. The slow attribute will also be outputted in KTAP. Note: This patch is intended to replace the use of CONFIG_MEMCPY_SLOW_KUNIT_TEST and to potentially deprecate this feature. This patch does not remove the config option but does add a note to the config definition commenting on this future shift. Reviewed-by: David Gow <davidgow@google.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
		
			
				
	
	
		
			569 lines
		
	
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			569 lines
		
	
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * Test cases for memcpy(), memmove(), and memset().
 | |
|  */
 | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 | |
| 
 | |
| #include <kunit/test.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/mm.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/overflow.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/vmalloc.h>
 | |
| 
 | |
| struct some_bytes {
 | |
| 	union {
 | |
| 		u8 data[32];
 | |
| 		struct {
 | |
| 			u32 one;
 | |
| 			u16 two;
 | |
| 			u8  three;
 | |
| 			/* 1 byte hole */
 | |
| 			u32 four[4];
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| #define check(instance, v) do {	\
 | |
| 	BUILD_BUG_ON(sizeof(instance.data) != 32);	\
 | |
| 	for (size_t i = 0; i < sizeof(instance.data); i++) {	\
 | |
| 		KUNIT_ASSERT_EQ_MSG(test, instance.data[i], v, \
 | |
| 			"line %d: '%s' not initialized to 0x%02x @ %d (saw 0x%02x)\n", \
 | |
| 			__LINE__, #instance, v, i, instance.data[i]);	\
 | |
| 	}	\
 | |
| } while (0)
 | |
| 
 | |
| #define compare(name, one, two) do { \
 | |
| 	BUILD_BUG_ON(sizeof(one) != sizeof(two)); \
 | |
| 	for (size_t i = 0; i < sizeof(one); i++) {	\
 | |
| 		KUNIT_EXPECT_EQ_MSG(test, one.data[i], two.data[i], \
 | |
| 			"line %d: %s.data[%d] (0x%02x) != %s.data[%d] (0x%02x)\n", \
 | |
| 			__LINE__, #one, i, one.data[i], #two, i, two.data[i]); \
 | |
| 	}	\
 | |
| 	kunit_info(test, "ok: " TEST_OP "() " name "\n");	\
 | |
| } while (0)
 | |
| 
 | |
| static void memcpy_test(struct kunit *test)
 | |
| {
 | |
| #define TEST_OP "memcpy"
 | |
| 	struct some_bytes control = {
 | |
| 		.data = { 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			  0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			  0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			  0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes zero = { };
 | |
| 	struct some_bytes middle = {
 | |
| 		.data = { 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			  0x20, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0x00,
 | |
| 			  0x00, 0x00, 0x00, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			  0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes three = {
 | |
| 		.data = { 0x00, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			  0x20, 0x00, 0x00, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			  0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			  0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes dest = { };
 | |
| 	int count;
 | |
| 	u8 *ptr;
 | |
| 
 | |
| 	/* Verify static initializers. */
 | |
| 	check(control, 0x20);
 | |
| 	check(zero, 0);
 | |
| 	compare("static initializers", dest, zero);
 | |
| 
 | |
| 	/* Verify assignment. */
 | |
| 	dest = control;
 | |
| 	compare("direct assignment", dest, control);
 | |
| 
 | |
| 	/* Verify complete overwrite. */
 | |
| 	memcpy(dest.data, zero.data, sizeof(dest.data));
 | |
| 	compare("complete overwrite", dest, zero);
 | |
| 
 | |
| 	/* Verify middle overwrite. */
 | |
| 	dest = control;
 | |
| 	memcpy(dest.data + 12, zero.data, 7);
 | |
| 	compare("middle overwrite", dest, middle);
 | |
| 
 | |
| 	/* Verify argument side-effects aren't repeated. */
 | |
| 	dest = control;
 | |
| 	ptr = dest.data;
 | |
| 	count = 1;
 | |
| 	memcpy(ptr++, zero.data, count++);
 | |
| 	ptr += 8;
 | |
| 	memcpy(ptr++, zero.data, count++);
 | |
| 	compare("argument side-effects", dest, three);
 | |
| #undef TEST_OP
 | |
| }
 | |
| 
 | |
| static unsigned char larger_array [2048];
 | |
| 
 | |
| static void memmove_test(struct kunit *test)
 | |
| {
 | |
| #define TEST_OP "memmove"
 | |
| 	struct some_bytes control = {
 | |
| 		.data = { 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes zero = { };
 | |
| 	struct some_bytes middle = {
 | |
| 		.data = { 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x00, 0x00, 0x00, 0x00,
 | |
| 			  0x00, 0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes five = {
 | |
| 		.data = { 0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x00, 0x00, 0x00, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes overlap = {
 | |
| 		.data = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
 | |
| 			  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes overlap_expected = {
 | |
| 		.data = { 0x00, 0x01, 0x00, 0x01, 0x02, 0x03, 0x04, 0x07,
 | |
| 			  0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			  0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes dest = { };
 | |
| 	int count;
 | |
| 	u8 *ptr;
 | |
| 
 | |
| 	/* Verify static initializers. */
 | |
| 	check(control, 0x99);
 | |
| 	check(zero, 0);
 | |
| 	compare("static initializers", zero, dest);
 | |
| 
 | |
| 	/* Verify assignment. */
 | |
| 	dest = control;
 | |
| 	compare("direct assignment", dest, control);
 | |
| 
 | |
| 	/* Verify complete overwrite. */
 | |
| 	memmove(dest.data, zero.data, sizeof(dest.data));
 | |
| 	compare("complete overwrite", dest, zero);
 | |
| 
 | |
| 	/* Verify middle overwrite. */
 | |
| 	dest = control;
 | |
| 	memmove(dest.data + 12, zero.data, 7);
 | |
| 	compare("middle overwrite", dest, middle);
 | |
| 
 | |
| 	/* Verify argument side-effects aren't repeated. */
 | |
| 	dest = control;
 | |
| 	ptr = dest.data;
 | |
| 	count = 2;
 | |
| 	memmove(ptr++, zero.data, count++);
 | |
| 	ptr += 9;
 | |
| 	memmove(ptr++, zero.data, count++);
 | |
| 	compare("argument side-effects", dest, five);
 | |
| 
 | |
| 	/* Verify overlapping overwrite is correct. */
 | |
| 	ptr = &overlap.data[2];
 | |
| 	memmove(ptr, overlap.data, 5);
 | |
| 	compare("overlapping write", overlap, overlap_expected);
 | |
| 
 | |
| 	/* Verify larger overlapping moves. */
 | |
| 	larger_array[256] = 0xAAu;
 | |
| 	/*
 | |
| 	 * Test a backwards overlapping memmove first. 256 and 1024 are
 | |
| 	 * important for i386 to use rep movsl.
 | |
| 	 */
 | |
| 	memmove(larger_array, larger_array + 256, 1024);
 | |
| 	KUNIT_ASSERT_EQ(test, larger_array[0], 0xAAu);
 | |
| 	KUNIT_ASSERT_EQ(test, larger_array[256], 0x00);
 | |
| 	KUNIT_ASSERT_NULL(test,
 | |
| 		memchr(larger_array + 1, 0xaa, ARRAY_SIZE(larger_array) - 1));
 | |
| 	/* Test a forwards overlapping memmove. */
 | |
| 	larger_array[0] = 0xBBu;
 | |
| 	memmove(larger_array + 256, larger_array, 1024);
 | |
| 	KUNIT_ASSERT_EQ(test, larger_array[0], 0xBBu);
 | |
| 	KUNIT_ASSERT_EQ(test, larger_array[256], 0xBBu);
 | |
| 	KUNIT_ASSERT_NULL(test, memchr(larger_array + 1, 0xBBu, 256 - 1));
 | |
| 	KUNIT_ASSERT_NULL(test,
 | |
| 		memchr(larger_array + 257, 0xBBu, ARRAY_SIZE(larger_array) - 257));
 | |
| #undef TEST_OP
 | |
| }
 | |
| 
 | |
| static void memset_test(struct kunit *test)
 | |
| {
 | |
| #define TEST_OP "memset"
 | |
| 	struct some_bytes control = {
 | |
| 		.data = { 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			  0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			  0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			  0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes complete = {
 | |
| 		.data = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 | |
| 			  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 | |
| 			  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 | |
| 			  0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes middle = {
 | |
| 		.data = { 0x30, 0x30, 0x30, 0x30, 0x31, 0x31, 0x31, 0x31,
 | |
| 			  0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31, 0x31,
 | |
| 			  0x31, 0x31, 0x31, 0x31, 0x30, 0x30, 0x30, 0x30,
 | |
| 			  0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes three = {
 | |
| 		.data = { 0x60, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			  0x30, 0x61, 0x61, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			  0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			  0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes after = {
 | |
| 		.data = { 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x72,
 | |
| 			  0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
 | |
| 			  0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
 | |
| 			  0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72, 0x72,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes startat = {
 | |
| 		.data = { 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
 | |
| 			  0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
 | |
| 			  0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
 | |
| 			  0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79, 0x79,
 | |
| 			},
 | |
| 	};
 | |
| 	struct some_bytes dest = { };
 | |
| 	int count, value;
 | |
| 	u8 *ptr;
 | |
| 
 | |
| 	/* Verify static initializers. */
 | |
| 	check(control, 0x30);
 | |
| 	check(dest, 0);
 | |
| 
 | |
| 	/* Verify assignment. */
 | |
| 	dest = control;
 | |
| 	compare("direct assignment", dest, control);
 | |
| 
 | |
| 	/* Verify complete overwrite. */
 | |
| 	memset(dest.data, 0xff, sizeof(dest.data));
 | |
| 	compare("complete overwrite", dest, complete);
 | |
| 
 | |
| 	/* Verify middle overwrite. */
 | |
| 	dest = control;
 | |
| 	memset(dest.data + 4, 0x31, 16);
 | |
| 	compare("middle overwrite", dest, middle);
 | |
| 
 | |
| 	/* Verify argument side-effects aren't repeated. */
 | |
| 	dest = control;
 | |
| 	ptr = dest.data;
 | |
| 	value = 0x60;
 | |
| 	count = 1;
 | |
| 	memset(ptr++, value++, count++);
 | |
| 	ptr += 8;
 | |
| 	memset(ptr++, value++, count++);
 | |
| 	compare("argument side-effects", dest, three);
 | |
| 
 | |
| 	/* Verify memset_after() */
 | |
| 	dest = control;
 | |
| 	memset_after(&dest, 0x72, three);
 | |
| 	compare("memset_after()", dest, after);
 | |
| 
 | |
| 	/* Verify memset_startat() */
 | |
| 	dest = control;
 | |
| 	memset_startat(&dest, 0x79, four);
 | |
| 	compare("memset_startat()", dest, startat);
 | |
| #undef TEST_OP
 | |
| }
 | |
| 
 | |
| static u8 large_src[1024];
 | |
| static u8 large_dst[2048];
 | |
| static const u8 large_zero[2048];
 | |
| 
 | |
| static void set_random_nonzero(struct kunit *test, u8 *byte)
 | |
| {
 | |
| 	int failed_rng = 0;
 | |
| 
 | |
| 	while (*byte == 0) {
 | |
| 		get_random_bytes(byte, 1);
 | |
| 		KUNIT_ASSERT_LT_MSG(test, failed_rng++, 100,
 | |
| 				    "Is the RNG broken?");
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void init_large(struct kunit *test)
 | |
| {
 | |
| 	if (!IS_ENABLED(CONFIG_MEMCPY_SLOW_KUNIT_TEST))
 | |
| 		kunit_skip(test, "Slow test skipped. Enable with CONFIG_MEMCPY_SLOW_KUNIT_TEST=y");
 | |
| 
 | |
| 	/* Get many bit patterns. */
 | |
| 	get_random_bytes(large_src, ARRAY_SIZE(large_src));
 | |
| 
 | |
| 	/* Make sure we have non-zero edges. */
 | |
| 	set_random_nonzero(test, &large_src[0]);
 | |
| 	set_random_nonzero(test, &large_src[ARRAY_SIZE(large_src) - 1]);
 | |
| 
 | |
| 	/* Explicitly zero the entire destination. */
 | |
| 	memset(large_dst, 0, ARRAY_SIZE(large_dst));
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Instead of an indirect function call for "copy" or a giant macro,
 | |
|  * use a bool to pick memcpy or memmove.
 | |
|  */
 | |
| static void copy_large_test(struct kunit *test, bool use_memmove)
 | |
| {
 | |
| 	init_large(test);
 | |
| 
 | |
| 	/* Copy a growing number of non-overlapping bytes ... */
 | |
| 	for (int bytes = 1; bytes <= ARRAY_SIZE(large_src); bytes++) {
 | |
| 		/* Over a shifting destination window ... */
 | |
| 		for (int offset = 0; offset < ARRAY_SIZE(large_src); offset++) {
 | |
| 			int right_zero_pos = offset + bytes;
 | |
| 			int right_zero_size = ARRAY_SIZE(large_dst) - right_zero_pos;
 | |
| 
 | |
| 			/* Copy! */
 | |
| 			if (use_memmove)
 | |
| 				memmove(large_dst + offset, large_src, bytes);
 | |
| 			else
 | |
| 				memcpy(large_dst + offset, large_src, bytes);
 | |
| 
 | |
| 			/* Did we touch anything before the copy area? */
 | |
| 			KUNIT_ASSERT_EQ_MSG(test,
 | |
| 				memcmp(large_dst, large_zero, offset), 0,
 | |
| 				"with size %d at offset %d", bytes, offset);
 | |
| 			/* Did we touch anything after the copy area? */
 | |
| 			KUNIT_ASSERT_EQ_MSG(test,
 | |
| 				memcmp(&large_dst[right_zero_pos], large_zero, right_zero_size), 0,
 | |
| 				"with size %d at offset %d", bytes, offset);
 | |
| 
 | |
| 			/* Are we byte-for-byte exact across the copy? */
 | |
| 			KUNIT_ASSERT_EQ_MSG(test,
 | |
| 				memcmp(large_dst + offset, large_src, bytes), 0,
 | |
| 				"with size %d at offset %d", bytes, offset);
 | |
| 
 | |
| 			/* Zero out what we copied for the next cycle. */
 | |
| 			memset(large_dst + offset, 0, bytes);
 | |
| 		}
 | |
| 		/* Avoid stall warnings if this loop gets slow. */
 | |
| 		cond_resched();
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void memcpy_large_test(struct kunit *test)
 | |
| {
 | |
| 	copy_large_test(test, false);
 | |
| }
 | |
| 
 | |
| static void memmove_large_test(struct kunit *test)
 | |
| {
 | |
| 	copy_large_test(test, true);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * On the assumption that boundary conditions are going to be the most
 | |
|  * sensitive, instead of taking a full step (inc) each iteration,
 | |
|  * take single index steps for at least the first "inc"-many indexes
 | |
|  * from the "start" and at least the last "inc"-many indexes before
 | |
|  * the "end". When in the middle, take full "inc"-wide steps. For
 | |
|  * example, calling next_step(idx, 1, 15, 3) with idx starting at 0
 | |
|  * would see the following pattern: 1 2 3 4 7 10 11 12 13 14 15.
 | |
|  */
 | |
| static int next_step(int idx, int start, int end, int inc)
 | |
| {
 | |
| 	start += inc;
 | |
| 	end -= inc;
 | |
| 
 | |
| 	if (idx < start || idx + inc > end)
 | |
| 		inc = 1;
 | |
| 	return idx + inc;
 | |
| }
 | |
| 
 | |
| static void inner_loop(struct kunit *test, int bytes, int d_off, int s_off)
 | |
| {
 | |
| 	int left_zero_pos, left_zero_size;
 | |
| 	int right_zero_pos, right_zero_size;
 | |
| 	int src_pos, src_orig_pos, src_size;
 | |
| 	int pos;
 | |
| 
 | |
| 	/* Place the source in the destination buffer. */
 | |
| 	memcpy(&large_dst[s_off], large_src, bytes);
 | |
| 
 | |
| 	/* Copy to destination offset. */
 | |
| 	memmove(&large_dst[d_off], &large_dst[s_off], bytes);
 | |
| 
 | |
| 	/* Make sure destination entirely matches. */
 | |
| 	KUNIT_ASSERT_EQ_MSG(test, memcmp(&large_dst[d_off], large_src, bytes), 0,
 | |
| 		"with size %d at src offset %d and dest offset %d",
 | |
| 		bytes, s_off, d_off);
 | |
| 
 | |
| 	/* Calculate the expected zero spans. */
 | |
| 	if (s_off < d_off) {
 | |
| 		left_zero_pos = 0;
 | |
| 		left_zero_size = s_off;
 | |
| 
 | |
| 		right_zero_pos = d_off + bytes;
 | |
| 		right_zero_size = ARRAY_SIZE(large_dst) - right_zero_pos;
 | |
| 
 | |
| 		src_pos = s_off;
 | |
| 		src_orig_pos = 0;
 | |
| 		src_size = d_off - s_off;
 | |
| 	} else {
 | |
| 		left_zero_pos = 0;
 | |
| 		left_zero_size = d_off;
 | |
| 
 | |
| 		right_zero_pos = s_off + bytes;
 | |
| 		right_zero_size = ARRAY_SIZE(large_dst) - right_zero_pos;
 | |
| 
 | |
| 		src_pos = d_off + bytes;
 | |
| 		src_orig_pos = src_pos - s_off;
 | |
| 		src_size = right_zero_pos - src_pos;
 | |
| 	}
 | |
| 
 | |
| 	/* Check non-overlapping source is unchanged.*/
 | |
| 	KUNIT_ASSERT_EQ_MSG(test,
 | |
| 		memcmp(&large_dst[src_pos], &large_src[src_orig_pos], src_size), 0,
 | |
| 		"with size %d at src offset %d and dest offset %d",
 | |
| 		bytes, s_off, d_off);
 | |
| 
 | |
| 	/* Check leading buffer contents are zero. */
 | |
| 	KUNIT_ASSERT_EQ_MSG(test,
 | |
| 		memcmp(&large_dst[left_zero_pos], large_zero, left_zero_size), 0,
 | |
| 		"with size %d at src offset %d and dest offset %d",
 | |
| 		bytes, s_off, d_off);
 | |
| 	/* Check trailing buffer contents are zero. */
 | |
| 	KUNIT_ASSERT_EQ_MSG(test,
 | |
| 		memcmp(&large_dst[right_zero_pos], large_zero, right_zero_size), 0,
 | |
| 		"with size %d at src offset %d and dest offset %d",
 | |
| 		bytes, s_off, d_off);
 | |
| 
 | |
| 	/* Zero out everything not already zeroed.*/
 | |
| 	pos = left_zero_pos + left_zero_size;
 | |
| 	memset(&large_dst[pos], 0, right_zero_pos - pos);
 | |
| }
 | |
| 
 | |
| static void memmove_overlap_test(struct kunit *test)
 | |
| {
 | |
| 	/*
 | |
| 	 * Running all possible offset and overlap combinations takes a
 | |
| 	 * very long time. Instead, only check up to 128 bytes offset
 | |
| 	 * into the destination buffer (which should result in crossing
 | |
| 	 * cachelines), with a step size of 1 through 7 to try to skip some
 | |
| 	 * redundancy.
 | |
| 	 */
 | |
| 	static const int offset_max = 128; /* less than ARRAY_SIZE(large_src); */
 | |
| 	static const int bytes_step = 7;
 | |
| 	static const int window_step = 7;
 | |
| 
 | |
| 	static const int bytes_start = 1;
 | |
| 	static const int bytes_end = ARRAY_SIZE(large_src) + 1;
 | |
| 
 | |
| 	init_large(test);
 | |
| 
 | |
| 	/* Copy a growing number of overlapping bytes ... */
 | |
| 	for (int bytes = bytes_start; bytes < bytes_end;
 | |
| 	     bytes = next_step(bytes, bytes_start, bytes_end, bytes_step)) {
 | |
| 
 | |
| 		/* Over a shifting destination window ... */
 | |
| 		for (int d_off = 0; d_off < offset_max; d_off++) {
 | |
| 			int s_start = max(d_off - bytes, 0);
 | |
| 			int s_end = min_t(int, d_off + bytes, ARRAY_SIZE(large_src));
 | |
| 
 | |
| 			/* Over a shifting source window ... */
 | |
| 			for (int s_off = s_start; s_off < s_end;
 | |
| 			     s_off = next_step(s_off, s_start, s_end, window_step))
 | |
| 				inner_loop(test, bytes, d_off, s_off);
 | |
| 
 | |
| 			/* Avoid stall warnings. */
 | |
| 			cond_resched();
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void strtomem_test(struct kunit *test)
 | |
| {
 | |
| 	static const char input[sizeof(unsigned long)] = "hi";
 | |
| 	static const char truncate[] = "this is too long";
 | |
| 	struct {
 | |
| 		unsigned long canary1;
 | |
| 		unsigned char output[sizeof(unsigned long)] __nonstring;
 | |
| 		unsigned long canary2;
 | |
| 	} wrap;
 | |
| 
 | |
| 	memset(&wrap, 0xFF, sizeof(wrap));
 | |
| 	KUNIT_EXPECT_EQ_MSG(test, wrap.canary1, ULONG_MAX,
 | |
| 			    "bad initial canary value");
 | |
| 	KUNIT_EXPECT_EQ_MSG(test, wrap.canary2, ULONG_MAX,
 | |
| 			    "bad initial canary value");
 | |
| 
 | |
| 	/* Check unpadded copy leaves surroundings untouched. */
 | |
| 	strtomem(wrap.output, input);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.canary1, ULONG_MAX);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.output[0], input[0]);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.output[1], input[1]);
 | |
| 	for (size_t i = 2; i < sizeof(wrap.output); i++)
 | |
| 		KUNIT_EXPECT_EQ(test, wrap.output[i], 0xFF);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.canary2, ULONG_MAX);
 | |
| 
 | |
| 	/* Check truncated copy leaves surroundings untouched. */
 | |
| 	memset(&wrap, 0xFF, sizeof(wrap));
 | |
| 	strtomem(wrap.output, truncate);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.canary1, ULONG_MAX);
 | |
| 	for (size_t i = 0; i < sizeof(wrap.output); i++)
 | |
| 		KUNIT_EXPECT_EQ(test, wrap.output[i], truncate[i]);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.canary2, ULONG_MAX);
 | |
| 
 | |
| 	/* Check padded copy leaves only string padded. */
 | |
| 	memset(&wrap, 0xFF, sizeof(wrap));
 | |
| 	strtomem_pad(wrap.output, input, 0xAA);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.canary1, ULONG_MAX);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.output[0], input[0]);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.output[1], input[1]);
 | |
| 	for (size_t i = 2; i < sizeof(wrap.output); i++)
 | |
| 		KUNIT_EXPECT_EQ(test, wrap.output[i], 0xAA);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.canary2, ULONG_MAX);
 | |
| 
 | |
| 	/* Check truncated padded copy has no padding. */
 | |
| 	memset(&wrap, 0xFF, sizeof(wrap));
 | |
| 	strtomem(wrap.output, truncate);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.canary1, ULONG_MAX);
 | |
| 	for (size_t i = 0; i < sizeof(wrap.output); i++)
 | |
| 		KUNIT_EXPECT_EQ(test, wrap.output[i], truncate[i]);
 | |
| 	KUNIT_EXPECT_EQ(test, wrap.canary2, ULONG_MAX);
 | |
| }
 | |
| 
 | |
| static struct kunit_case memcpy_test_cases[] = {
 | |
| 	KUNIT_CASE(memset_test),
 | |
| 	KUNIT_CASE(memcpy_test),
 | |
| 	KUNIT_CASE_SLOW(memcpy_large_test),
 | |
| 	KUNIT_CASE_SLOW(memmove_test),
 | |
| 	KUNIT_CASE_SLOW(memmove_large_test),
 | |
| 	KUNIT_CASE_SLOW(memmove_overlap_test),
 | |
| 	KUNIT_CASE(strtomem_test),
 | |
| 	{}
 | |
| };
 | |
| 
 | |
| static struct kunit_suite memcpy_test_suite = {
 | |
| 	.name = "memcpy",
 | |
| 	.test_cases = memcpy_test_cases,
 | |
| };
 | |
| 
 | |
| kunit_test_suite(memcpy_test_suite);
 | |
| 
 | |
| MODULE_LICENSE("GPL");
 |