mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-05-24 10:39:52 +00:00
![]() Currently the driver allows to configure matching by VLAN EtherType.
However, the retrieval function does not report it back to the user. Add
it.
Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
Fixes:
|
||
---|---|---|
.. | ||
igc.h | ||
igc_base.c | ||
igc_base.h | ||
igc_defines.h | ||
igc_diag.c | ||
igc_diag.h | ||
igc_dump.c | ||
igc_ethtool.c | ||
igc_hw.h | ||
igc_i225.c | ||
igc_i225.h | ||
igc_mac.c | ||
igc_mac.h | ||
igc_main.c | ||
igc_nvm.c | ||
igc_nvm.h | ||
igc_phy.c | ||
igc_phy.h | ||
igc_ptp.c | ||
igc_regs.h | ||
igc_tsn.c | ||
igc_tsn.h | ||
igc_xdp.c | ||
igc_xdp.h | ||
Makefile |