linux/Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml
Rohit Agarwal 014f3272af dt-bindings: qcom: Update RPMHPD entries for some SoCs
Update the RPMHPD references with new bindings defined in rpmhpd.h
for Qualcomm SoCs SM8[2345]50.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1690461813-22564-1-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-03 20:53:34 -07:00

99 lines
2.3 KiB
YAML

# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/qcom,sm8250-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SM8250 Display DPU
maintainers:
- Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
$ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
const: qcom,sm8250-dpu
reg:
items:
- description: Address offset and size for mdp register set
- description: Address offset and size for vbif register set
reg-names:
items:
- const: mdp
- const: vbif
clocks:
items:
- description: Display ahb clock
- description: Display hf axi clock
- description: Display core clock
- description: Display vsync clock
clock-names:
items:
- const: iface
- const: bus
- const: core
- const: vsync
required:
- compatible
- reg
- reg-names
- clocks
- clock-names
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,dispcc-sm8250.h>
#include <dt-bindings/clock/qcom,gcc-sm8250.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8250.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
display-controller@ae01000 {
compatible = "qcom,sm8250-dpu";
reg = <0x0ae01000 0x8f000>,
<0x0aeb0000 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&gcc GCC_DISP_HF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "iface", "bus", "core", "vsync";
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@1 {
reg = <1>;
endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
};
...