linux/drivers/bluetooth
David Lechner aa09939869 Bluetooth: hci_ll: add support for setting public address
This adds support for setting the public address on Texas Instruments
Bluetooth chips using a vendor-specific command.

This has been tested on a CC2560A chip. The TI wiki also indicates that
this command should work on TI WL17xx/WL18xx Bluetooth chips.

During review, there was some question as to the correctness of the byte
swapping since TI's documentation is not clear on this matter. This can
be tested with the btmgmt utility from bluez. The adapter must be powered
off to change the address. If the baswap() is omitted, address is reversed.

In case there is a issue in the future, here is the output of btmon during
the command `btmgmt public-addr 00:11:22:33:44:55`:

Bluetooth monitor ver 5.43
= Note: Linux version 4.15.0-rc2-08561-gcb132a1-dirty (armv5tejl)      0.707043
= Note: Bluetooth subsystem version 2.22                               0.707091
= New Index: 00:17:E7:BD:1C:8E (Primary,UART,hci0)              [hci0] 0.707106
@ MGMT Open: btmgmt (privileged) version 1.14                 {0x0002} 0.707124
@ MGMT Open: bluetoothd (privileged) version 1.14             {0x0001} 0.707137
@ MGMT Open: btmon (privileged) version 1.14                  {0x0003} 0.707540
@ MGMT Command: Set Public Address (0x0039) plen 6    {0x0002} [hci0] 11.167991
        Address: 00:11:22:33:44:55 (CIMSYS Inc)
@ MGMT Event: Command Complete (0x0001) plen 7        {0x0002} [hci0] 11.175681
      Set Public Address (0x0039) plen 4
        Status: Success (0x00)
        Missing options: 0x00000000
@ MGMT Event: Index Removed (0x0005) plen 0           {0x0003} [hci0] 11.175757
@ MGMT Event: Index Removed (0x0005) plen 0           {0x0002} [hci0] 11.175757
@ MGMT Event: Index Removed (0x0005) plen 0           {0x0001} [hci0] 11.175757
= Open Index: 00:17:E7:BD:1C:8E                                [hci0] 11.176807
< HCI Command: Vendor (0x3f|0x0006) plen 6                     [hci0] 11.176975
        00 11 22 33 44 55                                .."3DU
> HCI Event: Command Complete (0x0e) plen 4                    [hci0] 11.188260
      Vendor (0x3f|0x0006) ncmd 1
        Status: Success (0x00)
...
< HCI Command: Read Local Version Info.. (0x04|0x0001) plen 0  [hci0] 11.189859
> HCI Event: Command Complete (0x0e) plen 12                   [hci0] 11.190732
      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: Bluetooth 2.1 (0x04) - Revision 0 (0x0000)
        LMP version: Bluetooth 2.1 (0x04) - Subversion 6431 (0x191f)
        Manufacturer: Texas Instruments Inc. (13)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0               [hci0] 11.191027
> HCI Event: Command Complete (0x0e) plen 10                   [hci0] 11.192101
      Read BD ADDR (0x04|0x0009) ncmd 1
        Status: Success (0x00)
        Address: 00:11:22:33:44:55 (CIMSYS Inc)
...

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2017-12-13 00:28:42 +01:00
..
ath3k.c Bluetooth: Style fix - align block comments 2017-07-22 08:39:39 +02:00
bcm203x.c Bluetooth: mark expected switch fall-throughs 2017-10-14 09:25:51 +02:00
bfusb.c networking: introduce and use skb_put_data() 2017-06-16 11:48:37 -04:00
bluecard_cs.c Bluetooth: Convert timers to use timer_setup() 2017-10-06 20:37:11 +02:00
bpa10x.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
bt3c_cs.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
btbcm.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
btbcm.h
btintel.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
btintel.h
btmrvl_debugfs.c
btmrvl_drv.h
btmrvl_main.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2017-07-05 12:31:59 -07:00
btmrvl_sdio.c Bluetooth: btmrvl: *_err() and *_info() strings should end with newlines 2017-10-06 20:35:47 +02:00
btmrvl_sdio.h
btqca.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
btqca.h
btqcomsmd.c Bluetooth: btqcomsmd: Fix skb double free corruption 2017-12-13 00:28:41 +01:00
btrtl.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
btrtl.h
btsdio.c Bluetooth: btsdio: Do not bind to non-removable BCM43341 2017-12-13 00:28:41 +01:00
btuart_cs.c Bluetooth: Style fix - align block comments 2017-07-22 08:39:39 +02:00
btusb.c Bluetooth: btusb: Add a Kconfig option to enable USB autosuspend by default 2017-12-13 00:28:40 +01:00
btwilink.c Bluetooth: Style fix - align block comments 2017-07-22 08:39:39 +02:00
dtl1_cs.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00
hci_ag6xx.c
hci_ath.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
hci_bcm.c Bluetooth: hci_bcm: Add support for BCM2E72 2017-12-13 00:28:41 +01:00
hci_bcsp.c Bluetooth: Convert timers to use timer_setup() 2017-10-06 20:37:11 +02:00
hci_h4.c Bluetooth: Use bt_dev_err and bt_dev_info when possible 2017-10-30 12:25:45 +02:00
hci_h5.c Bluetooth: Convert timers to use timer_setup() 2017-10-06 20:37:11 +02:00
hci_intel.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00
hci_ldisc.c Bluetooth: hci_ldisc: Fix another race when closing the tty. 2017-10-30 15:48:32 +01:00
hci_ll.c Bluetooth: hci_ll: add support for setting public address 2017-12-13 00:28:42 +01:00
hci_mrvl.c networking: introduce and use skb_put_data() 2017-06-16 11:48:37 -04:00
hci_nokia.c Bluetooth: hci_nokia: Use new hci_uart_unregister_device() function 2017-07-20 11:18:36 +02:00
hci_qca.c Bluetooth: hci_qca: Avoid setup failure on missing rampatch 2017-12-13 00:28:40 +01:00
hci_serdev.c Bluetooth: hci_serdev: Init hci_uart proto_lock to avoid oops 2017-12-13 00:28:41 +01:00
hci_uart.h Bluetooth: hci_ldisc: Allow sleeping while proto locks are held. 2017-10-29 14:03:28 +01:00
hci_vhci.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00
Kconfig Bluetooth: btusb: Fix BT_HCIBTUSB_AUTOSUSPEND Kconfig option name 2017-12-13 00:28:41 +01:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00