linux/drivers/perf/arm_pmu.c
Rob Herring (Arm) 58074a0fce perf: arm_pmuv3: Add support for the Branch Record Buffer Extension (BRBE)
The ARMv9.2 architecture introduces the optional Branch Record Buffer
Extension (BRBE), which records information about branches as they are
executed into set of branch record registers. BRBE is similar to x86's
Last Branch Record (LBR) and PowerPC's Branch History Rolling Buffer
(BHRB).

BRBE supports filtering by exception level and can filter just the
source or target address if excluded to avoid leaking privileged
addresses. The h/w filter would be sufficient except when there are
multiple events with disjoint filtering requirements. In this case, BRBE
is configured with a union of all the events' desired branches, and then
the recorded branches are filtered based on each event's filter. For
example, with one event capturing kernel events and another event
capturing user events, BRBE will be configured to capture both kernel
and user branches. When handling event overflow, the branch records have
to be filtered by software to only include kernel or user branch
addresses for that event. In contrast, x86 simply configures LBR using
the last installed event which seems broken.

It is possible on x86 to configure branch filter such that no branches
are ever recorded (e.g. -j save_type). For BRBE, events with a
configuration that will result in no samples are rejected.

Recording branches in KVM guests is not supported like x86. However,
perf on x86 allows requesting branch recording in guests. The guest
events are recorded, but the resulting branches are all from the host.
For BRBE, events with branch recording and "exclude_host" set are
rejected. Requiring "exclude_guest" to be set did not work. The default
for the perf tool does set "exclude_guest" if no exception level
options are specified. However, specifying kernel or user events
defaults to including both host and guest. In this case, only host
branches are recorded.

BRBE can support some additional exception branch types compared to
x86. On x86, all exceptions other than syscalls are recorded as IRQ.
With BRBE, it is possible to better categorize these exceptions. One
limitation relative to x86 is we cannot distinguish a syscall return
from other exception returns. So all exception returns are recorded as
ERET type. The FIQ branch type is omitted as the only FIQ user is Apple
platforms which don't support BRBE. The debug branch types are omitted
as there is no clear need for them.

BRBE records are invalidated whenever events are reconfigured, a new
task is scheduled in, or after recording is paused (and the records
have been recorded for the event). The architecture allows branch
records to be invalidated by the PE under implementation defined
conditions. It is expected that these conditions are rare.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
tested-by: Adam Young <admiyo@os.amperecomputing.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-4-e7775563036e@kernel.org
[will: Fix sparse warnings about mixed declarations and code.
       Fix C99 comment syntax.]
Signed-off-by: Will Deacon <will@kernel.org>
2025-07-08 17:58:49 +01:00

962 lines
22 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
#undef DEBUG
/*
* ARM performance counter support.
*
* Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
* Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
*
* This code is based on the sparc64 perf event code, which is in turn based
* on the x86 code.
*/
#define pr_fmt(fmt) "hw perfevents: " fmt
#include <linux/bitmap.h>
#include <linux/cpumask.h>
#include <linux/cpu_pm.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/perf/arm_pmu.h>
#include <linux/slab.h>
#include <linux/sched/clock.h>
#include <linux/spinlock.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <asm/irq_regs.h>
static int armpmu_count_irq_users(const int irq);
struct pmu_irq_ops {
void (*enable_pmuirq)(unsigned int irq);
void (*disable_pmuirq)(unsigned int irq);
void (*free_pmuirq)(unsigned int irq, int cpu, void __percpu *devid);
};
static void armpmu_free_pmuirq(unsigned int irq, int cpu, void __percpu *devid)
{
free_irq(irq, per_cpu_ptr(devid, cpu));
}
static const struct pmu_irq_ops pmuirq_ops = {
.enable_pmuirq = enable_irq,
.disable_pmuirq = disable_irq_nosync,
.free_pmuirq = armpmu_free_pmuirq
};
static void armpmu_free_pmunmi(unsigned int irq, int cpu, void __percpu *devid)
{
free_nmi(irq, per_cpu_ptr(devid, cpu));
}
static const struct pmu_irq_ops pmunmi_ops = {
.enable_pmuirq = enable_nmi,
.disable_pmuirq = disable_nmi_nosync,
.free_pmuirq = armpmu_free_pmunmi
};
static void armpmu_enable_percpu_pmuirq(unsigned int irq)
{
enable_percpu_irq(irq, IRQ_TYPE_NONE);
}
static void armpmu_free_percpu_pmuirq(unsigned int irq, int cpu,
void __percpu *devid)
{
if (armpmu_count_irq_users(irq) == 1)
free_percpu_irq(irq, devid);
}
static const struct pmu_irq_ops percpu_pmuirq_ops = {
.enable_pmuirq = armpmu_enable_percpu_pmuirq,
.disable_pmuirq = disable_percpu_irq,
.free_pmuirq = armpmu_free_percpu_pmuirq
};
static void armpmu_enable_percpu_pmunmi(unsigned int irq)
{
if (!prepare_percpu_nmi(irq))
enable_percpu_nmi(irq, IRQ_TYPE_NONE);
}
static void armpmu_disable_percpu_pmunmi(unsigned int irq)
{
disable_percpu_nmi(irq);
teardown_percpu_nmi(irq);
}
static void armpmu_free_percpu_pmunmi(unsigned int irq, int cpu,
void __percpu *devid)
{
if (armpmu_count_irq_users(irq) == 1)
free_percpu_nmi(irq, devid);
}
static const struct pmu_irq_ops percpu_pmunmi_ops = {
.enable_pmuirq = armpmu_enable_percpu_pmunmi,
.disable_pmuirq = armpmu_disable_percpu_pmunmi,
.free_pmuirq = armpmu_free_percpu_pmunmi
};
DEFINE_PER_CPU(struct arm_pmu *, cpu_armpmu);
static DEFINE_PER_CPU(int, cpu_irq);
static DEFINE_PER_CPU(const struct pmu_irq_ops *, cpu_irq_ops);
static bool has_nmi;
static inline u64 arm_pmu_event_max_period(struct perf_event *event)
{
if (event->hw.flags & ARMPMU_EVT_64BIT)
return GENMASK_ULL(63, 0);
else if (event->hw.flags & ARMPMU_EVT_63BIT)
return GENMASK_ULL(62, 0);
else if (event->hw.flags & ARMPMU_EVT_47BIT)
return GENMASK_ULL(46, 0);
else
return GENMASK_ULL(31, 0);
}
static int
armpmu_map_cache_event(const unsigned (*cache_map)
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX],
u64 config)
{
unsigned int cache_type, cache_op, cache_result, ret;
cache_type = (config >> 0) & 0xff;
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
return -EINVAL;
cache_op = (config >> 8) & 0xff;
if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
return -EINVAL;
cache_result = (config >> 16) & 0xff;
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
if (!cache_map)
return -ENOENT;
ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
return ret;
}
static int
armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
{
int mapping;
if (config >= PERF_COUNT_HW_MAX)
return -EINVAL;
if (!event_map)
return -ENOENT;
mapping = (*event_map)[config];
return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
}
static int
armpmu_map_raw_event(u32 raw_event_mask, u64 config)
{
return (int)(config & raw_event_mask);
}
int
armpmu_map_event(struct perf_event *event,
const unsigned (*event_map)[PERF_COUNT_HW_MAX],
const unsigned (*cache_map)
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX],
u32 raw_event_mask)
{
u64 config = event->attr.config;
int type = event->attr.type;
if (type == event->pmu->type)
return armpmu_map_raw_event(raw_event_mask, config);
switch (type) {
case PERF_TYPE_HARDWARE:
return armpmu_map_hw_event(event_map, config);
case PERF_TYPE_HW_CACHE:
return armpmu_map_cache_event(cache_map, config);
case PERF_TYPE_RAW:
return armpmu_map_raw_event(raw_event_mask, config);
}
return -ENOENT;
}
int armpmu_event_set_period(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
u64 max_period;
int ret = 0;
max_period = arm_pmu_event_max_period(event);
if (unlikely(left <= -period)) {
left = period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
if (unlikely(left <= 0)) {
left += period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
ret = 1;
}
/*
* Limit the maximum period to prevent the counter value
* from overtaking the one we are about to program. In
* effect we are reducing max_period to account for
* interrupt latency (and we are being very conservative).
*/
if (left > (max_period >> 1))
left = (max_period >> 1);
local64_set(&hwc->prev_count, (u64)-left);
armpmu->write_counter(event, (u64)(-left) & max_period);
perf_event_update_userpage(event);
return ret;
}
u64 armpmu_event_update(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
u64 delta, prev_raw_count, new_raw_count;
u64 max_period = arm_pmu_event_max_period(event);
again:
prev_raw_count = local64_read(&hwc->prev_count);
new_raw_count = armpmu->read_counter(event);
if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count)
goto again;
delta = (new_raw_count - prev_raw_count) & max_period;
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
return new_raw_count;
}
static void
armpmu_read(struct perf_event *event)
{
armpmu_event_update(event);
}
static void
armpmu_stop(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
/*
* ARM pmu always has to update the counter, so ignore
* PERF_EF_UPDATE, see comments in armpmu_start().
*/
if (!(hwc->state & PERF_HES_STOPPED)) {
armpmu->disable(event);
armpmu_event_update(event);
hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
}
static void armpmu_start(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
/*
* ARM pmu always has to reprogram the period, so ignore
* PERF_EF_RELOAD, see the comment below.
*/
if (flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
hwc->state = 0;
/*
* Set the period again. Some counters can't be stopped, so when we
* were stopped we simply disabled the IRQ source and the counter
* may have been left counting. If we don't do this step then we may
* get an interrupt too soon or *way* too late if the overflow has
* happened since disabling.
*/
armpmu_event_set_period(event);
armpmu->enable(event);
}
static void
armpmu_del(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
armpmu_stop(event, PERF_EF_UPDATE);
if (has_branch_stack(event)) {
hw_events->branch_users--;
perf_sched_cb_dec(event->pmu);
}
hw_events->events[idx] = NULL;
armpmu->clear_event_idx(hw_events, event);
perf_event_update_userpage(event);
/* Clear the allocated counter */
hwc->idx = -1;
}
static int
armpmu_add(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx;
/* An event following a process won't be stopped earlier */
if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
return -ENOENT;
/* If we don't have a space for the counter then finish early. */
idx = armpmu->get_event_idx(hw_events, event);
if (idx < 0)
return idx;
/* The newly-allocated counter should be empty */
WARN_ON_ONCE(hw_events->events[idx]);
if (has_branch_stack(event)) {
hw_events->branch_users++;
perf_sched_cb_inc(event->pmu);
}
event->hw.idx = idx;
hw_events->events[idx] = event;
hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
if (flags & PERF_EF_START)
armpmu_start(event, PERF_EF_RELOAD);
/* Propagate our changes to the userspace mapping. */
perf_event_update_userpage(event);
return 0;
}
static int
validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events,
struct perf_event *event)
{
struct arm_pmu *armpmu;
if (is_software_event(event))
return 1;
/*
* Reject groups spanning multiple HW PMUs (e.g. CPU + CCI). The
* core perf code won't check that the pmu->ctx == leader->ctx
* until after pmu->event_init(event).
*/
if (event->pmu != pmu)
return 0;
if (event->state < PERF_EVENT_STATE_OFF)
return 1;
if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
return 1;
armpmu = to_arm_pmu(event->pmu);
return armpmu->get_event_idx(hw_events, event) >= 0;
}
static int
validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
struct pmu_hw_events fake_pmu;
/*
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask));
if (!validate_event(event->pmu, &fake_pmu, leader))
return -EINVAL;
if (event == leader)
return 0;
for_each_sibling_event(sibling, leader) {
if (!validate_event(event->pmu, &fake_pmu, sibling))
return -EINVAL;
}
if (!validate_event(event->pmu, &fake_pmu, event))
return -EINVAL;
return 0;
}
static irqreturn_t armpmu_dispatch_irq(int irq, void *dev)
{
struct arm_pmu *armpmu;
int ret;
u64 start_clock, finish_clock;
/*
* we request the IRQ with a (possibly percpu) struct arm_pmu**, but
* the handlers expect a struct arm_pmu*. The percpu_irq framework will
* do any necessary shifting, we just need to perform the first
* dereference.
*/
armpmu = *(void **)dev;
if (WARN_ON_ONCE(!armpmu))
return IRQ_NONE;
start_clock = sched_clock();
ret = armpmu->handle_irq(armpmu);
finish_clock = sched_clock();
perf_sample_event_took(finish_clock - start_clock);
return ret;
}
static int
__hw_perf_event_init(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int mapping, ret;
hwc->flags = 0;
mapping = armpmu->map_event(event);
if (mapping < 0) {
pr_debug("event %x:%llx not supported\n", event->attr.type,
event->attr.config);
return mapping;
}
/*
* We don't assign an index until we actually place the event onto
* hardware. Use -1 to signify that we haven't decided where to put it
* yet. For SMP systems, each core has it's own PMU so we can't do any
* clever allocation or constraints checking at this point.
*/
hwc->idx = -1;
hwc->config_base = 0;
hwc->config = 0;
hwc->event_base = 0;
/*
* Check whether we need to exclude the counter from certain modes.
*/
if (armpmu->set_event_filter) {
ret = armpmu->set_event_filter(hwc, &event->attr);
if (ret)
return ret;
}
/*
* Store the event encoding into the config_base field.
*/
hwc->config_base |= (unsigned long)mapping;
if (!is_sampling_event(event)) {
/*
* For non-sampling runs, limit the sample_period to half
* of the counter width. That way, the new counter value
* is far less likely to overtake the previous one unless
* you have some serious IRQ latency issues.
*/
hwc->sample_period = arm_pmu_event_max_period(event) >> 1;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
return validate_group(event);
}
static int armpmu_event_init(struct perf_event *event)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
/*
* Reject CPU-affine events for CPUs that are of a different class to
* that which this PMU handles. Process-following events (where
* event->cpu == -1) can be migrated between CPUs, and thus we have to
* reject them later (in armpmu_add) if they're scheduled on a
* different class of CPU.
*/
if (event->cpu != -1 &&
!cpumask_test_cpu(event->cpu, &armpmu->supported_cpus))
return -ENOENT;
if (has_branch_stack(event) && !armpmu->reg_brbidr)
return -EOPNOTSUPP;
return __hw_perf_event_init(event);
}
static void armpmu_enable(struct pmu *pmu)
{
struct arm_pmu *armpmu = to_arm_pmu(pmu);
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
bool enabled = !bitmap_empty(hw_events->used_mask, ARMPMU_MAX_HWEVENTS);
/* For task-bound events we may be called on other CPUs */
if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
return;
if (enabled)
armpmu->start(armpmu);
}
static void armpmu_disable(struct pmu *pmu)
{
struct arm_pmu *armpmu = to_arm_pmu(pmu);
/* For task-bound events we may be called on other CPUs */
if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
return;
armpmu->stop(armpmu);
}
/*
* In heterogeneous systems, events are specific to a particular
* microarchitecture, and aren't suitable for another. Thus, only match CPUs of
* the same microarchitecture.
*/
static bool armpmu_filter(struct pmu *pmu, int cpu)
{
struct arm_pmu *armpmu = to_arm_pmu(pmu);
return !cpumask_test_cpu(cpu, &armpmu->supported_cpus);
}
static ssize_t cpus_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct arm_pmu *armpmu = to_arm_pmu(dev_get_drvdata(dev));
return cpumap_print_to_pagebuf(true, buf, &armpmu->supported_cpus);
}
static DEVICE_ATTR_RO(cpus);
static struct attribute *armpmu_common_attrs[] = {
&dev_attr_cpus.attr,
NULL,
};
static const struct attribute_group armpmu_common_attr_group = {
.attrs = armpmu_common_attrs,
};
static int armpmu_count_irq_users(const int irq)
{
int cpu, count = 0;
for_each_possible_cpu(cpu) {
if (per_cpu(cpu_irq, cpu) == irq)
count++;
}
return count;
}
static const struct pmu_irq_ops *armpmu_find_irq_ops(int irq)
{
const struct pmu_irq_ops *ops = NULL;
int cpu;
for_each_possible_cpu(cpu) {
if (per_cpu(cpu_irq, cpu) != irq)
continue;
ops = per_cpu(cpu_irq_ops, cpu);
if (ops)
break;
}
return ops;
}
void armpmu_free_irq(int irq, int cpu)
{
if (per_cpu(cpu_irq, cpu) == 0)
return;
if (WARN_ON(irq != per_cpu(cpu_irq, cpu)))
return;
per_cpu(cpu_irq_ops, cpu)->free_pmuirq(irq, cpu, &cpu_armpmu);
per_cpu(cpu_irq, cpu) = 0;
per_cpu(cpu_irq_ops, cpu) = NULL;
}
int armpmu_request_irq(int irq, int cpu)
{
int err = 0;
const irq_handler_t handler = armpmu_dispatch_irq;
const struct pmu_irq_ops *irq_ops;
if (!irq)
return 0;
if (!irq_is_percpu_devid(irq)) {
unsigned long irq_flags;
err = irq_force_affinity(irq, cpumask_of(cpu));
if (err && num_possible_cpus() > 1) {
pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n",
irq, cpu);
goto err_out;
}
irq_flags = IRQF_PERCPU |
IRQF_NOBALANCING | IRQF_NO_AUTOEN |
IRQF_NO_THREAD;
err = request_nmi(irq, handler, irq_flags, "arm-pmu",
per_cpu_ptr(&cpu_armpmu, cpu));
/* If cannot get an NMI, get a normal interrupt */
if (err) {
err = request_irq(irq, handler, irq_flags, "arm-pmu",
per_cpu_ptr(&cpu_armpmu, cpu));
irq_ops = &pmuirq_ops;
} else {
has_nmi = true;
irq_ops = &pmunmi_ops;
}
} else if (armpmu_count_irq_users(irq) == 0) {
err = request_percpu_nmi(irq, handler, "arm-pmu", &cpu_armpmu);
/* If cannot get an NMI, get a normal interrupt */
if (err) {
err = request_percpu_irq(irq, handler, "arm-pmu",
&cpu_armpmu);
irq_ops = &percpu_pmuirq_ops;
} else {
has_nmi = true;
irq_ops = &percpu_pmunmi_ops;
}
} else {
/* Per cpudevid irq was already requested by another CPU */
irq_ops = armpmu_find_irq_ops(irq);
if (WARN_ON(!irq_ops))
err = -EINVAL;
}
if (err)
goto err_out;
per_cpu(cpu_irq, cpu) = irq;
per_cpu(cpu_irq_ops, cpu) = irq_ops;
return 0;
err_out:
pr_err("unable to request IRQ%d for ARM PMU counters\n", irq);
return err;
}
static int armpmu_get_cpu_irq(struct arm_pmu *pmu, int cpu)
{
struct pmu_hw_events __percpu *hw_events = pmu->hw_events;
return per_cpu(hw_events->irq, cpu);
}
bool arm_pmu_irq_is_nmi(void)
{
return has_nmi;
}
/*
* PMU hardware loses all context when a CPU goes offline.
* When a CPU is hotplugged back in, since some hardware registers are
* UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
* junk values out of them.
*/
static int arm_perf_starting_cpu(unsigned int cpu, struct hlist_node *node)
{
struct arm_pmu *pmu = hlist_entry_safe(node, struct arm_pmu, node);
int irq;
if (!cpumask_test_cpu(cpu, &pmu->supported_cpus))
return 0;
if (pmu->reset)
pmu->reset(pmu);
per_cpu(cpu_armpmu, cpu) = pmu;
irq = armpmu_get_cpu_irq(pmu, cpu);
if (irq)
per_cpu(cpu_irq_ops, cpu)->enable_pmuirq(irq);
return 0;
}
static int arm_perf_teardown_cpu(unsigned int cpu, struct hlist_node *node)
{
struct arm_pmu *pmu = hlist_entry_safe(node, struct arm_pmu, node);
int irq;
if (!cpumask_test_cpu(cpu, &pmu->supported_cpus))
return 0;
irq = armpmu_get_cpu_irq(pmu, cpu);
if (irq)
per_cpu(cpu_irq_ops, cpu)->disable_pmuirq(irq);
per_cpu(cpu_armpmu, cpu) = NULL;
return 0;
}
#ifdef CONFIG_CPU_PM
static void cpu_pm_pmu_setup(struct arm_pmu *armpmu, unsigned long cmd)
{
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
struct perf_event *event;
int idx;
for_each_set_bit(idx, armpmu->cntr_mask, ARMPMU_MAX_HWEVENTS) {
event = hw_events->events[idx];
if (!event)
continue;
switch (cmd) {
case CPU_PM_ENTER:
/*
* Stop and update the counter
*/
armpmu_stop(event, PERF_EF_UPDATE);
break;
case CPU_PM_EXIT:
case CPU_PM_ENTER_FAILED:
/*
* Restore and enable the counter.
*/
armpmu_start(event, PERF_EF_RELOAD);
break;
default:
break;
}
}
}
static int cpu_pm_pmu_notify(struct notifier_block *b, unsigned long cmd,
void *v)
{
struct arm_pmu *armpmu = container_of(b, struct arm_pmu, cpu_pm_nb);
struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
bool enabled = !bitmap_empty(hw_events->used_mask, ARMPMU_MAX_HWEVENTS);
if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus))
return NOTIFY_DONE;
/*
* Always reset the PMU registers on power-up even if
* there are no events running.
*/
if (cmd == CPU_PM_EXIT && armpmu->reset)
armpmu->reset(armpmu);
if (!enabled)
return NOTIFY_OK;
switch (cmd) {
case CPU_PM_ENTER:
armpmu->stop(armpmu);
cpu_pm_pmu_setup(armpmu, cmd);
break;
case CPU_PM_EXIT:
case CPU_PM_ENTER_FAILED:
cpu_pm_pmu_setup(armpmu, cmd);
armpmu->start(armpmu);
break;
default:
return NOTIFY_DONE;
}
return NOTIFY_OK;
}
static int cpu_pm_pmu_register(struct arm_pmu *cpu_pmu)
{
cpu_pmu->cpu_pm_nb.notifier_call = cpu_pm_pmu_notify;
return cpu_pm_register_notifier(&cpu_pmu->cpu_pm_nb);
}
static void cpu_pm_pmu_unregister(struct arm_pmu *cpu_pmu)
{
cpu_pm_unregister_notifier(&cpu_pmu->cpu_pm_nb);
}
#else
static inline int cpu_pm_pmu_register(struct arm_pmu *cpu_pmu) { return 0; }
static inline void cpu_pm_pmu_unregister(struct arm_pmu *cpu_pmu) { }
#endif
static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
{
int err;
err = cpuhp_state_add_instance(CPUHP_AP_PERF_ARM_STARTING,
&cpu_pmu->node);
if (err)
goto out;
err = cpu_pm_pmu_register(cpu_pmu);
if (err)
goto out_unregister;
return 0;
out_unregister:
cpuhp_state_remove_instance_nocalls(CPUHP_AP_PERF_ARM_STARTING,
&cpu_pmu->node);
out:
return err;
}
static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
{
cpu_pm_pmu_unregister(cpu_pmu);
cpuhp_state_remove_instance_nocalls(CPUHP_AP_PERF_ARM_STARTING,
&cpu_pmu->node);
}
struct arm_pmu *armpmu_alloc(void)
{
struct arm_pmu *pmu;
int cpu;
pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
if (!pmu)
goto out;
pmu->hw_events = alloc_percpu_gfp(struct pmu_hw_events, GFP_KERNEL);
if (!pmu->hw_events) {
pr_info("failed to allocate per-cpu PMU data.\n");
goto out_free_pmu;
}
pmu->pmu = (struct pmu) {
.pmu_enable = armpmu_enable,
.pmu_disable = armpmu_disable,
.event_init = armpmu_event_init,
.add = armpmu_add,
.del = armpmu_del,
.start = armpmu_start,
.stop = armpmu_stop,
.read = armpmu_read,
.filter = armpmu_filter,
.attr_groups = pmu->attr_groups,
/*
* This is a CPU PMU potentially in a heterogeneous
* configuration (e.g. big.LITTLE) so
* PERF_PMU_CAP_EXTENDED_HW_TYPE is required to open
* PERF_TYPE_HARDWARE and PERF_TYPE_HW_CACHE events on a
* specific PMU.
*/
.capabilities = PERF_PMU_CAP_EXTENDED_REGS |
PERF_PMU_CAP_EXTENDED_HW_TYPE,
};
pmu->attr_groups[ARMPMU_ATTR_GROUP_COMMON] =
&armpmu_common_attr_group;
for_each_possible_cpu(cpu) {
struct pmu_hw_events *events;
events = per_cpu_ptr(pmu->hw_events, cpu);
events->percpu_pmu = pmu;
}
return pmu;
out_free_pmu:
kfree(pmu);
out:
return NULL;
}
void armpmu_free(struct arm_pmu *pmu)
{
free_percpu(pmu->hw_events);
kfree(pmu);
}
int armpmu_register(struct arm_pmu *pmu)
{
int ret;
ret = cpu_pmu_init(pmu);
if (ret)
return ret;
if (!pmu->set_event_filter)
pmu->pmu.capabilities |= PERF_PMU_CAP_NO_EXCLUDE;
ret = perf_pmu_register(&pmu->pmu, pmu->name, -1);
if (ret)
goto out_destroy;
pr_info("enabled with %s PMU driver, %d (%*pb) counters available%s\n",
pmu->name, bitmap_weight(pmu->cntr_mask, ARMPMU_MAX_HWEVENTS),
ARMPMU_MAX_HWEVENTS, &pmu->cntr_mask,
has_nmi ? ", using NMIs" : "");
kvm_host_pmu_init(pmu);
return 0;
out_destroy:
cpu_pmu_destroy(pmu);
return ret;
}
static int arm_pmu_hp_init(void)
{
int ret;
ret = cpuhp_setup_state_multi(CPUHP_AP_PERF_ARM_STARTING,
"perf/arm/pmu:starting",
arm_perf_starting_cpu,
arm_perf_teardown_cpu);
if (ret)
pr_err("CPU hotplug notifier for ARM PMU could not be registered: %d\n",
ret);
return ret;
}
subsys_initcall(arm_pmu_hp_init);