linux/drivers/mfd/cs42l43-sdw.c
Linus Torvalds 909fd2b89f - Fix race in device_node_get_regmap() using more extensive locking.
- Remove unused platform driver support for syscon.
 - Allow syscon nodes to be registered without a "syscon" compatible string.
 - Make `platform_data` pointer const in struct mfd_cell.
 - Revert support for multiple AXP PMICs to avoid regressions.
 - Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO operation.
 - Store the result from fault_log() for use by other sub-components.
 - Fix an invalid regmap-config max_register value.
 - Add another Gemini Lake ISA bridge PCI device ID.
 - Use devm_register_power_off_handler() to simplify code.
 - Add support for QNAP microcontroller units, including LEDs, input, and hwmon.
 - Use MFD_CELL macros and remove unused code.
 - Add support for AAEON UP board FPGA.
 - Remove unused includes.
 - Fix various typos and compatibility issues in multiple bindings.
 - Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424.
 - Convert several bindings to YAML schema.
 - Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings directly.
 - Fix rohm,bd71815 bindings by correcting resistor values and typos.
 - Documentation improvements:
 - Add documentation for LED1202 and qnap-mcu-hwmon.
 - Adjust the file entry for the qnap-mcu header in MAINTAINERS.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmePbHkACgkQUa+KL4f8
 d2HQNw//fM3+JpyTUKjUtBl8YH0ilgZ2iKiXLHyJ6vMIqv+RfLlPAliM8f1bkEj8
 x/9kKp6ytdyAhQ/oAJW/vxRhWZVsfh9T7WSy/Q/WNChcGJ0KtUwtjWWuezdDJoyr
 6Ju4PhKHVz46cBW56u3OCbcogN8AHi1gZiAh8APwVhldUO6swaisPBvxw/4u4WMs
 HGviTLueXEptF4/actnArQ1YJ6tctY7C5tV06f6Irxn6hSz8EpGBRQ47S7Hom+mx
 aIyRLkERqhZ1FNBDfk2YERqaOyxzQRYy+PMNr6AtQ/TE+7pVBOz7xoSI3VH3k7mM
 k4u8Gau9qbnVi/pUkabgcdKOCGUYeZzXZgJT/Ttq5O9ddPE8sHMcLrxKMtUP2CBE
 6Zf0EljscGFOWise/ocNUblpy0rfXPl+wMiibxY5C+X56QkluDn2Q8ObGODt0bbR
 ACgPFL2S8m2MLEOTzBKDlSgeqoMZFKVWkqAry+yNUgIKbtM6pIdaM5ZCUhgdJ5GL
 CxGP6uw68oAUnr1lRCytgGR5XtmcIXS/Jo2u/T7cmucD3inuxQyt5TrZxma48QbL
 2+P2vmymn6ZWQb82OptrnKCMsBEXnNbWv+2BiRYoKXQt48BxIocVrsyEQIh4qGcP
 KPUB1aCxP/zJ2H7rTaK4QqM+fgOloShs5nI21v5EWSCQKvTN5ko=
 =3HQm
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull mfd updates from Lee Jones:

 - Fix race in device_node_get_regmap() using more extensive locking

 - Remove unused platform driver support for syscon

 - Allow syscon nodes to be registered without a "syscon" compatible
   string

 - Make `platform_data` pointer const in struct mfd_cell

 - Revert support for multiple AXP PMICs to avoid regressions

 - Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
   operation

 - Store the result from fault_log() for use by other sub-components

 - Fix an invalid regmap-config max_register value

 - Add another Gemini Lake ISA bridge PCI device ID

 - Use devm_register_power_off_handler() to simplify code

 - Add support for QNAP microcontroller units, including LEDs, input,
   and hwmon

 - Use MFD_CELL macros and remove unused code

 - Add support for AAEON UP board FPGA

 - Remove unused includes

 - Fix various typos and compatibility issues in multiple bindings

 - Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424

 - Convert several bindings to YAML schema

 - Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
   directly

 - Fix rohm,bd71815 bindings by correcting resistor values and typos

 - Documentation improvements:
    - Add documentation for LED1202 and qnap-mcu-hwmon
    - Adjust the file entry for the qnap-mcu header in MAINTAINERS

* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
  MAINTAINERS: Adjust the file entry for the qnap-mcu header
  dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
  dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
  Revert "mfd: axp20x: Allow multiple regulators"
  dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
  mfd: syscon: Allow syscon nodes without a "syscon" compatible
  mfd: syscon: Remove the platform driver support
  mfd: syscon: Fix race in device_node_get_regmap()
  dt-bindings: mfd: atmel: Convert to YAML schema
  dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
  dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
  mfd: tps65219: Remove unused macros & add regmap.h
  mfd: tps65219: Use MFD_CELL macros
  leds: Add LED1202 I2C driver
  dt-bindings: leds: Add LED1202 LED Controller
  Documentation:leds: Add leds-st1202.rst
  mfd: Add support for AAEON UP board FPGA
  mfd: da9052: Store result from fault_log
  mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
  mfd: cs42l43: Use devres for remove as well
  ...
2025-01-22 09:16:02 -08:00

212 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* CS42L43 SoundWire driver
*
* Copyright (C) 2022-2023 Cirrus Logic, Inc. and
* Cirrus Logic International Semiconductor Ltd.
*/
#include <linux/array_size.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/mfd/cs42l43.h>
#include <linux/mfd/cs42l43-regs.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/regmap.h>
#include <linux/soundwire/sdw.h>
#include <linux/soundwire/sdw_registers.h>
#include <linux/soundwire/sdw_type.h>
#include "cs42l43.h"
#define CS42L43_SDW_PORT(port, chans) { \
.num = port, \
.max_ch = chans, \
.type = SDW_DPN_FULL, \
.max_word = 24, \
}
static const struct regmap_config cs42l43_sdw_regmap = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.reg_format_endian = REGMAP_ENDIAN_LITTLE,
.val_format_endian = REGMAP_ENDIAN_LITTLE,
.max_register = CS42L43_MCU_RAM_MAX,
.readable_reg = cs42l43_readable_register,
.volatile_reg = cs42l43_volatile_register,
.precious_reg = cs42l43_precious_register,
.cache_type = REGCACHE_MAPLE,
.reg_defaults = cs42l43_reg_default,
.num_reg_defaults = ARRAY_SIZE(cs42l43_reg_default),
};
static const struct sdw_dpn_prop cs42l43_src_port_props[] = {
CS42L43_SDW_PORT(1, 4),
CS42L43_SDW_PORT(2, 2),
CS42L43_SDW_PORT(3, 2),
CS42L43_SDW_PORT(4, 2),
};
static const struct sdw_dpn_prop cs42l43_sink_port_props[] = {
CS42L43_SDW_PORT(5, 2),
CS42L43_SDW_PORT(6, 2),
CS42L43_SDW_PORT(7, 2),
};
static int cs42l43_read_prop(struct sdw_slave *sdw)
{
struct sdw_slave_prop *prop = &sdw->prop;
struct device *dev = &sdw->dev;
int i;
prop->use_domain_irq = true;
prop->paging_support = true;
prop->wake_capable = true;
prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY |
SDW_SCP_INT1_IMPL_DEF;
for (i = 0; i < ARRAY_SIZE(cs42l43_src_port_props); i++)
prop->source_ports |= BIT(cs42l43_src_port_props[i].num);
prop->src_dpn_prop = devm_kmemdup(dev, cs42l43_src_port_props,
sizeof(cs42l43_src_port_props), GFP_KERNEL);
if (!prop->src_dpn_prop)
return -ENOMEM;
for (i = 0; i < ARRAY_SIZE(cs42l43_sink_port_props); i++)
prop->sink_ports |= BIT(cs42l43_sink_port_props[i].num);
prop->sink_dpn_prop = devm_kmemdup(dev, cs42l43_sink_port_props,
sizeof(cs42l43_sink_port_props), GFP_KERNEL);
if (!prop->sink_dpn_prop)
return -ENOMEM;
return 0;
}
static int cs42l43_sdw_update_status(struct sdw_slave *sdw, enum sdw_slave_status status)
{
struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev);
switch (status) {
case SDW_SLAVE_ATTACHED:
dev_dbg(cs42l43->dev, "Device attach\n");
sdw_write_no_pm(sdw, CS42L43_GEN_INT_MASK_1,
CS42L43_INT_STAT_GEN1_MASK);
cs42l43->attached = true;
complete(&cs42l43->device_attach);
break;
case SDW_SLAVE_UNATTACHED:
dev_dbg(cs42l43->dev, "Device detach\n");
cs42l43->attached = false;
reinit_completion(&cs42l43->device_attach);
complete(&cs42l43->device_detach);
break;
default:
break;
}
return 0;
}
static int cs42l43_sdw_interrupt(struct sdw_slave *sdw,
struct sdw_slave_intr_status *status)
{
/*
* The IRQ itself was handled through the regmap_irq handler, this is
* just clearing up the additional Cirrus SoundWire registers that are
* not covered by the SoundWire framework or the IRQ handler itself.
* There is only a single bit in GEN_INT_STAT_1 and it doesn't clear if
* IRQs are still pending so doing a read/write here after handling the
* IRQ is fine.
*/
sdw_read_no_pm(sdw, CS42L43_GEN_INT_STAT_1);
sdw_write_no_pm(sdw, CS42L43_GEN_INT_STAT_1, CS42L43_INT_STAT_GEN1_MASK);
return 0;
}
static int cs42l43_sdw_bus_config(struct sdw_slave *sdw,
struct sdw_bus_params *params)
{
struct cs42l43 *cs42l43 = dev_get_drvdata(&sdw->dev);
int ret = 0;
mutex_lock(&cs42l43->pll_lock);
if (cs42l43->sdw_freq != params->curr_dr_freq / 2) {
if (cs42l43->sdw_pll_active) {
dev_err(cs42l43->dev,
"PLL active can't change SoundWire bus clock\n");
ret = -EBUSY;
} else {
cs42l43->sdw_freq = params->curr_dr_freq / 2;
}
}
mutex_unlock(&cs42l43->pll_lock);
return ret;
}
static const struct sdw_slave_ops cs42l43_sdw_ops = {
.read_prop = cs42l43_read_prop,
.update_status = cs42l43_sdw_update_status,
.interrupt_callback = cs42l43_sdw_interrupt,
.bus_config = cs42l43_sdw_bus_config,
};
static int cs42l43_sdw_probe(struct sdw_slave *sdw, const struct sdw_device_id *id)
{
struct cs42l43 *cs42l43;
struct device *dev = &sdw->dev;
cs42l43 = devm_kzalloc(dev, sizeof(*cs42l43), GFP_KERNEL);
if (!cs42l43)
return -ENOMEM;
cs42l43->dev = dev;
cs42l43->sdw = sdw;
cs42l43->regmap = devm_regmap_init_sdw(sdw, &cs42l43_sdw_regmap);
if (IS_ERR(cs42l43->regmap))
return dev_err_probe(cs42l43->dev, PTR_ERR(cs42l43->regmap),
"Failed to allocate regmap\n");
return cs42l43_dev_probe(cs42l43);
}
static const struct sdw_device_id cs42l43_sdw_id[] = {
SDW_SLAVE_ENTRY(0x01FA, 0x4243, 0),
{}
};
MODULE_DEVICE_TABLE(sdw, cs42l43_sdw_id);
static struct sdw_driver cs42l43_sdw_driver = {
.driver = {
.name = "cs42l43",
.pm = pm_ptr(&cs42l43_pm_ops),
},
.probe = cs42l43_sdw_probe,
.id_table = cs42l43_sdw_id,
.ops = &cs42l43_sdw_ops,
};
module_sdw_driver(cs42l43_sdw_driver);
MODULE_IMPORT_NS("MFD_CS42L43");
MODULE_DESCRIPTION("CS42L43 SoundWire Driver");
MODULE_AUTHOR("Lucas Tanure <tanureal@opensource.cirrus.com>");
MODULE_LICENSE("GPL");