mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-21 06:50:25 +00:00

The IRIS acceleration found in the SM8650 platforms uses the vpu33 hardware version, and requires a slighly different reset and power off sequences in order to properly get out of runtime suspend. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e Dell Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Bryan O'Donoghue <bod@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
275 lines
8.7 KiB
C
275 lines
8.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/iopoll.h>
|
|
#include <linux/reset.h>
|
|
|
|
#include "iris_instance.h"
|
|
#include "iris_vpu_common.h"
|
|
#include "iris_vpu_register_defines.h"
|
|
|
|
#define WRAPPER_TZ_BASE_OFFS 0x000C0000
|
|
#define AON_BASE_OFFS 0x000E0000
|
|
#define AON_MVP_NOC_RESET 0x0001F000
|
|
|
|
#define WRAPPER_DEBUG_BRIDGE_LPI_CONTROL (WRAPPER_BASE_OFFS + 0x54)
|
|
#define WRAPPER_DEBUG_BRIDGE_LPI_STATUS (WRAPPER_BASE_OFFS + 0x58)
|
|
#define WRAPPER_IRIS_CPU_NOC_LPI_CONTROL (WRAPPER_BASE_OFFS + 0x5C)
|
|
#define REQ_POWER_DOWN_PREP BIT(0)
|
|
#define WRAPPER_IRIS_CPU_NOC_LPI_STATUS (WRAPPER_BASE_OFFS + 0x60)
|
|
#define WRAPPER_CORE_CLOCK_CONFIG (WRAPPER_BASE_OFFS + 0x88)
|
|
#define CORE_CLK_RUN 0x0
|
|
|
|
#define WRAPPER_TZ_CTL_AXI_CLOCK_CONFIG (WRAPPER_TZ_BASE_OFFS + 0x14)
|
|
#define CTL_AXI_CLK_HALT BIT(0)
|
|
#define CTL_CLK_HALT BIT(1)
|
|
|
|
#define WRAPPER_TZ_QNS4PDXFIFO_RESET (WRAPPER_TZ_BASE_OFFS + 0x18)
|
|
#define RESET_HIGH BIT(0)
|
|
|
|
#define CPU_CS_AHB_BRIDGE_SYNC_RESET (CPU_CS_BASE_OFFS + 0x160)
|
|
#define CORE_BRIDGE_SW_RESET BIT(0)
|
|
#define CORE_BRIDGE_HW_RESET_DISABLE BIT(1)
|
|
|
|
#define CPU_CS_X2RPMH (CPU_CS_BASE_OFFS + 0x168)
|
|
#define MSK_SIGNAL_FROM_TENSILICA BIT(0)
|
|
#define MSK_CORE_POWER_ON BIT(1)
|
|
|
|
#define AON_WRAPPER_MVP_NOC_RESET_REQ (AON_MVP_NOC_RESET + 0x000)
|
|
#define VIDEO_NOC_RESET_REQ (BIT(0) | BIT(1))
|
|
|
|
#define AON_WRAPPER_MVP_NOC_RESET_ACK (AON_MVP_NOC_RESET + 0x004)
|
|
|
|
#define VCODEC_SS_IDLE_STATUSN (VCODEC_BASE_OFFS + 0x70)
|
|
|
|
#define AON_WRAPPER_MVP_NOC_LPI_CONTROL (AON_BASE_OFFS)
|
|
#define AON_WRAPPER_MVP_NOC_LPI_STATUS (AON_BASE_OFFS + 0x4)
|
|
|
|
#define AON_WRAPPER_MVP_NOC_CORE_SW_RESET (AON_BASE_OFFS + 0x18)
|
|
#define SW_RESET BIT(0)
|
|
#define AON_WRAPPER_MVP_NOC_CORE_CLK_CONTROL (AON_BASE_OFFS + 0x20)
|
|
#define NOC_HALT BIT(0)
|
|
#define AON_WRAPPER_SPARE (AON_BASE_OFFS + 0x28)
|
|
|
|
static bool iris_vpu3x_hw_power_collapsed(struct iris_core *core)
|
|
{
|
|
u32 value, pwr_status;
|
|
|
|
value = readl(core->reg_base + WRAPPER_CORE_POWER_STATUS);
|
|
pwr_status = value & BIT(1);
|
|
|
|
return pwr_status ? false : true;
|
|
}
|
|
|
|
static void iris_vpu3_power_off_hardware(struct iris_core *core)
|
|
{
|
|
u32 reg_val = 0, value, i;
|
|
int ret;
|
|
|
|
if (iris_vpu3x_hw_power_collapsed(core))
|
|
goto disable_power;
|
|
|
|
dev_err(core->dev, "video hw is power on\n");
|
|
|
|
value = readl(core->reg_base + WRAPPER_CORE_CLOCK_CONFIG);
|
|
if (value)
|
|
writel(CORE_CLK_RUN, core->reg_base + WRAPPER_CORE_CLOCK_CONFIG);
|
|
|
|
for (i = 0; i < core->iris_platform_data->num_vpp_pipe; i++) {
|
|
ret = readl_poll_timeout(core->reg_base + VCODEC_SS_IDLE_STATUSN + 4 * i,
|
|
reg_val, reg_val & 0x400000, 2000, 20000);
|
|
if (ret)
|
|
goto disable_power;
|
|
}
|
|
|
|
writel(VIDEO_NOC_RESET_REQ, core->reg_base + AON_WRAPPER_MVP_NOC_RESET_REQ);
|
|
|
|
ret = readl_poll_timeout(core->reg_base + AON_WRAPPER_MVP_NOC_RESET_ACK,
|
|
reg_val, reg_val & 0x3, 200, 2000);
|
|
if (ret)
|
|
goto disable_power;
|
|
|
|
writel(0x0, core->reg_base + AON_WRAPPER_MVP_NOC_RESET_REQ);
|
|
|
|
ret = readl_poll_timeout(core->reg_base + AON_WRAPPER_MVP_NOC_RESET_ACK,
|
|
reg_val, !(reg_val & 0x3), 200, 2000);
|
|
if (ret)
|
|
goto disable_power;
|
|
|
|
writel(CORE_BRIDGE_SW_RESET | CORE_BRIDGE_HW_RESET_DISABLE,
|
|
core->reg_base + CPU_CS_AHB_BRIDGE_SYNC_RESET);
|
|
writel(CORE_BRIDGE_HW_RESET_DISABLE, core->reg_base + CPU_CS_AHB_BRIDGE_SYNC_RESET);
|
|
writel(0x0, core->reg_base + CPU_CS_AHB_BRIDGE_SYNC_RESET);
|
|
|
|
disable_power:
|
|
iris_vpu_power_off_hw(core);
|
|
}
|
|
|
|
static void iris_vpu33_power_off_hardware(struct iris_core *core)
|
|
{
|
|
u32 reg_val = 0, value, i;
|
|
int ret;
|
|
|
|
if (iris_vpu3x_hw_power_collapsed(core))
|
|
goto disable_power;
|
|
|
|
dev_err(core->dev, "video hw is power on\n");
|
|
|
|
value = readl(core->reg_base + WRAPPER_CORE_CLOCK_CONFIG);
|
|
if (value)
|
|
writel(CORE_CLK_RUN, core->reg_base + WRAPPER_CORE_CLOCK_CONFIG);
|
|
|
|
for (i = 0; i < core->iris_platform_data->num_vpp_pipe; i++) {
|
|
ret = readl_poll_timeout(core->reg_base + VCODEC_SS_IDLE_STATUSN + 4 * i,
|
|
reg_val, reg_val & 0x400000, 2000, 20000);
|
|
if (ret)
|
|
goto disable_power;
|
|
}
|
|
|
|
ret = readl_poll_timeout(core->reg_base + AON_WRAPPER_MVP_NOC_LPI_STATUS,
|
|
reg_val, reg_val & BIT(0), 200, 2000);
|
|
if (ret)
|
|
goto disable_power;
|
|
|
|
/* set MNoC to low power, set PD_NOC_QREQ (bit 0) */
|
|
writel(BIT(0), core->reg_base + AON_WRAPPER_MVP_NOC_LPI_CONTROL);
|
|
|
|
writel(CORE_BRIDGE_SW_RESET | CORE_BRIDGE_HW_RESET_DISABLE,
|
|
core->reg_base + CPU_CS_AHB_BRIDGE_SYNC_RESET);
|
|
writel(CORE_BRIDGE_HW_RESET_DISABLE, core->reg_base + CPU_CS_AHB_BRIDGE_SYNC_RESET);
|
|
writel(0x0, core->reg_base + CPU_CS_AHB_BRIDGE_SYNC_RESET);
|
|
|
|
disable_power:
|
|
iris_vpu_power_off_hw(core);
|
|
}
|
|
|
|
static int iris_vpu33_power_off_controller(struct iris_core *core)
|
|
{
|
|
u32 xo_rst_tbl_size = core->iris_platform_data->controller_rst_tbl_size;
|
|
u32 clk_rst_tbl_size = core->iris_platform_data->clk_rst_tbl_size;
|
|
u32 val = 0;
|
|
int ret;
|
|
|
|
writel(MSK_SIGNAL_FROM_TENSILICA | MSK_CORE_POWER_ON, core->reg_base + CPU_CS_X2RPMH);
|
|
|
|
writel(REQ_POWER_DOWN_PREP, core->reg_base + WRAPPER_IRIS_CPU_NOC_LPI_CONTROL);
|
|
|
|
ret = readl_poll_timeout(core->reg_base + WRAPPER_IRIS_CPU_NOC_LPI_STATUS,
|
|
val, val & BIT(0), 200, 2000);
|
|
if (ret)
|
|
goto disable_power;
|
|
|
|
writel(0x0, core->reg_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL);
|
|
|
|
ret = readl_poll_timeout(core->reg_base + WRAPPER_DEBUG_BRIDGE_LPI_STATUS,
|
|
val, val == 0, 200, 2000);
|
|
if (ret)
|
|
goto disable_power;
|
|
|
|
writel(CTL_AXI_CLK_HALT | CTL_CLK_HALT,
|
|
core->reg_base + WRAPPER_TZ_CTL_AXI_CLOCK_CONFIG);
|
|
writel(RESET_HIGH, core->reg_base + WRAPPER_TZ_QNS4PDXFIFO_RESET);
|
|
writel(0x0, core->reg_base + WRAPPER_TZ_QNS4PDXFIFO_RESET);
|
|
writel(0x0, core->reg_base + WRAPPER_TZ_CTL_AXI_CLOCK_CONFIG);
|
|
|
|
reset_control_bulk_reset(clk_rst_tbl_size, core->resets);
|
|
|
|
/* Disable MVP NoC clock */
|
|
val = readl(core->reg_base + AON_WRAPPER_MVP_NOC_CORE_CLK_CONTROL);
|
|
val |= NOC_HALT;
|
|
writel(val, core->reg_base + AON_WRAPPER_MVP_NOC_CORE_CLK_CONTROL);
|
|
|
|
/* enable MVP NoC reset */
|
|
val = readl(core->reg_base + AON_WRAPPER_MVP_NOC_CORE_SW_RESET);
|
|
val |= SW_RESET;
|
|
writel(val, core->reg_base + AON_WRAPPER_MVP_NOC_CORE_SW_RESET);
|
|
|
|
/* poll AON spare register bit0 to become zero with 50ms timeout */
|
|
ret = readl_poll_timeout(core->reg_base + AON_WRAPPER_SPARE,
|
|
val, (val & BIT(0)) == 0, 1000, 50000);
|
|
if (ret)
|
|
goto disable_power;
|
|
|
|
/* enable bit(1) to avoid cvp noc xo reset */
|
|
val = readl(core->reg_base + AON_WRAPPER_SPARE);
|
|
val |= BIT(1);
|
|
writel(val, core->reg_base + AON_WRAPPER_SPARE);
|
|
|
|
reset_control_bulk_assert(xo_rst_tbl_size, core->controller_resets);
|
|
|
|
/* De-assert MVP NoC reset */
|
|
val = readl(core->reg_base + AON_WRAPPER_MVP_NOC_CORE_SW_RESET);
|
|
val &= ~SW_RESET;
|
|
writel(val, core->reg_base + AON_WRAPPER_MVP_NOC_CORE_SW_RESET);
|
|
|
|
usleep_range(80, 100);
|
|
|
|
reset_control_bulk_deassert(xo_rst_tbl_size, core->controller_resets);
|
|
|
|
/* reset AON spare register */
|
|
writel(0, core->reg_base + AON_WRAPPER_SPARE);
|
|
|
|
/* Enable MVP NoC clock */
|
|
val = readl(core->reg_base + AON_WRAPPER_MVP_NOC_CORE_CLK_CONTROL);
|
|
val &= ~NOC_HALT;
|
|
writel(val, core->reg_base + AON_WRAPPER_MVP_NOC_CORE_CLK_CONTROL);
|
|
|
|
iris_disable_unprepare_clock(core, IRIS_CTRL_CLK);
|
|
|
|
disable_power:
|
|
iris_disable_power_domains(core, core->pmdomain_tbl->pd_devs[IRIS_CTRL_POWER_DOMAIN]);
|
|
iris_disable_unprepare_clock(core, IRIS_AXI_CLK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u64 iris_vpu3x_calculate_frequency(struct iris_inst *inst, size_t data_size)
|
|
{
|
|
struct platform_inst_caps *caps = inst->core->iris_platform_data->inst_caps;
|
|
struct v4l2_format *inp_f = inst->fmt_src;
|
|
u32 height, width, mbs_per_second, mbpf;
|
|
u64 fw_cycles, fw_vpp_cycles;
|
|
u64 vsp_cycles, vpp_cycles;
|
|
u32 fps = DEFAULT_FPS;
|
|
|
|
width = max(inp_f->fmt.pix_mp.width, inst->crop.width);
|
|
height = max(inp_f->fmt.pix_mp.height, inst->crop.height);
|
|
|
|
mbpf = NUM_MBS_PER_FRAME(height, width);
|
|
mbs_per_second = mbpf * fps;
|
|
|
|
fw_cycles = fps * caps->mb_cycles_fw;
|
|
fw_vpp_cycles = fps * caps->mb_cycles_fw_vpp;
|
|
|
|
vpp_cycles = mult_frac(mbs_per_second, caps->mb_cycles_vpp, (u32)inst->fw_caps[PIPE].value);
|
|
/* 21 / 20 is minimum overhead factor */
|
|
vpp_cycles += max(div_u64(vpp_cycles, 20), fw_vpp_cycles);
|
|
|
|
/* 1.059 is multi-pipe overhead */
|
|
if (inst->fw_caps[PIPE].value > 1)
|
|
vpp_cycles += div_u64(vpp_cycles * 59, 1000);
|
|
|
|
vsp_cycles = fps * data_size * 8;
|
|
vsp_cycles = div_u64(vsp_cycles, 2);
|
|
/* VSP FW overhead 1.05 */
|
|
vsp_cycles = div_u64(vsp_cycles * 21, 20);
|
|
|
|
if (inst->fw_caps[STAGE].value == STAGE_1)
|
|
vsp_cycles = vsp_cycles * 3;
|
|
|
|
return max3(vpp_cycles, vsp_cycles, fw_cycles);
|
|
}
|
|
|
|
const struct vpu_ops iris_vpu3_ops = {
|
|
.power_off_hw = iris_vpu3_power_off_hardware,
|
|
.power_off_controller = iris_vpu_power_off_controller,
|
|
.calc_freq = iris_vpu3x_calculate_frequency,
|
|
};
|
|
|
|
const struct vpu_ops iris_vpu33_ops = {
|
|
.power_off_hw = iris_vpu33_power_off_hardware,
|
|
.power_off_controller = iris_vpu33_power_off_controller,
|
|
.calc_freq = iris_vpu3x_calculate_frequency,
|
|
};
|