mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00

The Power LUT (Look-up Table) register base was missing, also add the bit define for sending serial LED data in reverse order, and use the BIT() macro to define the bits in the control register. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20241010-bcm63138-leds-v4-4-cdb80780a555@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
313 lines
8.2 KiB
C
313 lines
8.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
|
|
*/
|
|
#include <linux/bits.h>
|
|
#include <linux/cleanup.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define BCM63138_MAX_LEDS 32
|
|
#define BCM63138_MAX_BRIGHTNESS 9
|
|
|
|
#define BCM63138_LED_BITS 4 /* how many bits control a single LED */
|
|
#define BCM63138_LED_MASK ((1 << BCM63138_LED_BITS) - 1) /* 0xf */
|
|
#define BCM63138_LEDS_PER_REG (32 / BCM63138_LED_BITS) /* 8 */
|
|
|
|
#define BCM63138_GLB_CTRL 0x00
|
|
#define BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL BIT(1)
|
|
#define BCM63138_GLB_CTRL_SERIAL_LED_CLK_POL BIT(2)
|
|
#define BCM63138_GLB_CTRL_SERIAL_LED_EN_POL BIT(3)
|
|
#define BCM63138_GLB_CTRL_SERIAL_LED_MSB_FIRST BIT(4)
|
|
#define BCM63138_MASK 0x04
|
|
#define BCM63138_HW_LED_EN 0x08
|
|
#define BCM63138_SERIAL_LED_SHIFT_SEL 0x0c
|
|
#define BCM63138_FLASH_RATE_CTRL1 0x10
|
|
#define BCM63138_FLASH_RATE_CTRL2 0x14
|
|
#define BCM63138_FLASH_RATE_CTRL3 0x18
|
|
#define BCM63138_FLASH_RATE_CTRL4 0x1c
|
|
#define BCM63138_BRIGHT_CTRL1 0x20
|
|
#define BCM63138_BRIGHT_CTRL2 0x24
|
|
#define BCM63138_BRIGHT_CTRL3 0x28
|
|
#define BCM63138_BRIGHT_CTRL4 0x2c
|
|
#define BCM63138_POWER_LED_CFG 0x30
|
|
#define BCM63138_POWER_LUT_BASE0 0x34 /* -> b0 */
|
|
#define BCM63138_HW_POLARITY 0xb4
|
|
#define BCM63138_SW_DATA 0xb8
|
|
#define BCM63138_SW_POLARITY 0xbc
|
|
#define BCM63138_PARALLEL_LED_POLARITY 0xc0
|
|
#define BCM63138_SERIAL_LED_POLARITY 0xc4
|
|
#define BCM63138_HW_LED_STATUS 0xc8
|
|
#define BCM63138_FLASH_CTRL_STATUS 0xcc
|
|
#define BCM63138_FLASH_BRT_CTRL 0xd0
|
|
#define BCM63138_FLASH_P_LED_OUT_STATUS 0xd4
|
|
#define BCM63138_FLASH_S_LED_OUT_STATUS 0xd8
|
|
|
|
struct bcm63138_leds {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
spinlock_t lock;
|
|
};
|
|
|
|
struct bcm63138_led {
|
|
struct bcm63138_leds *leds;
|
|
struct led_classdev cdev;
|
|
u32 pin;
|
|
bool active_low;
|
|
};
|
|
|
|
/*
|
|
* I/O access
|
|
*/
|
|
|
|
static void bcm63138_leds_write(struct bcm63138_leds *leds, unsigned int reg,
|
|
u32 data)
|
|
{
|
|
writel(data, leds->base + reg);
|
|
}
|
|
|
|
static unsigned long bcm63138_leds_read(struct bcm63138_leds *leds,
|
|
unsigned int reg)
|
|
{
|
|
return readl(leds->base + reg);
|
|
}
|
|
|
|
static void bcm63138_leds_update_bits(struct bcm63138_leds *leds,
|
|
unsigned int reg, u32 mask, u32 val)
|
|
{
|
|
WARN_ON(val & ~mask);
|
|
|
|
bcm63138_leds_write(leds, reg, (bcm63138_leds_read(leds, reg) & ~mask) | (val & mask));
|
|
}
|
|
|
|
/*
|
|
* Helpers
|
|
*/
|
|
|
|
static void bcm63138_leds_set_flash_rate(struct bcm63138_leds *leds,
|
|
struct bcm63138_led *led,
|
|
u8 value)
|
|
{
|
|
int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
|
|
int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
|
|
|
|
bcm63138_leds_update_bits(leds, BCM63138_FLASH_RATE_CTRL1 + reg_offset,
|
|
BCM63138_LED_MASK << shift, value << shift);
|
|
}
|
|
|
|
static void bcm63138_leds_set_bright(struct bcm63138_leds *leds,
|
|
struct bcm63138_led *led,
|
|
u8 value)
|
|
{
|
|
int reg_offset = (led->pin >> fls((BCM63138_LEDS_PER_REG - 1))) * 4;
|
|
int shift = (led->pin & (BCM63138_LEDS_PER_REG - 1)) * BCM63138_LED_BITS;
|
|
|
|
bcm63138_leds_update_bits(leds, BCM63138_BRIGHT_CTRL1 + reg_offset,
|
|
BCM63138_LED_MASK << shift, value << shift);
|
|
}
|
|
|
|
static void bcm63138_leds_enable_led(struct bcm63138_leds *leds,
|
|
struct bcm63138_led *led,
|
|
enum led_brightness value)
|
|
{
|
|
u32 bit = BIT(led->pin);
|
|
|
|
bcm63138_leds_update_bits(leds, BCM63138_SW_DATA, bit, value ? bit : 0);
|
|
}
|
|
|
|
/*
|
|
* API callbacks
|
|
*/
|
|
|
|
static void bcm63138_leds_brightness_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
|
|
struct bcm63138_leds *leds = led->leds;
|
|
|
|
guard(spinlock_irqsave)(&leds->lock);
|
|
|
|
bcm63138_leds_enable_led(leds, led, value);
|
|
if (!value)
|
|
bcm63138_leds_set_flash_rate(leds, led, 0);
|
|
else
|
|
bcm63138_leds_set_bright(leds, led, value);
|
|
}
|
|
|
|
static int bcm63138_leds_blink_set(struct led_classdev *led_cdev,
|
|
unsigned long *delay_on,
|
|
unsigned long *delay_off)
|
|
{
|
|
struct bcm63138_led *led = container_of(led_cdev, struct bcm63138_led, cdev);
|
|
struct bcm63138_leds *leds = led->leds;
|
|
u8 value;
|
|
|
|
if (!*delay_on && !*delay_off) {
|
|
*delay_on = 640;
|
|
*delay_off = 640;
|
|
}
|
|
|
|
if (*delay_on != *delay_off) {
|
|
dev_dbg(led_cdev->dev, "Blinking at unequal delays is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (*delay_on) {
|
|
case 1152 ... 1408: /* 1280 ms ± 10% */
|
|
value = 0x7;
|
|
break;
|
|
case 576 ... 704: /* 640 ms ± 10% */
|
|
value = 0x6;
|
|
break;
|
|
case 288 ... 352: /* 320 ms ± 10% */
|
|
value = 0x5;
|
|
break;
|
|
case 126 ... 154: /* 140 ms ± 10% */
|
|
value = 0x4;
|
|
break;
|
|
case 59 ... 72: /* 65 ms ± 10% */
|
|
value = 0x3;
|
|
break;
|
|
default:
|
|
dev_dbg(led_cdev->dev, "Blinking delay value %lu is unsupported\n",
|
|
*delay_on);
|
|
return -EINVAL;
|
|
}
|
|
|
|
guard(spinlock_irqsave)(&leds->lock);
|
|
|
|
bcm63138_leds_enable_led(leds, led, BCM63138_MAX_BRIGHTNESS);
|
|
bcm63138_leds_set_flash_rate(leds, led, value);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* LED driver
|
|
*/
|
|
|
|
static void bcm63138_leds_create_led(struct bcm63138_leds *leds,
|
|
struct device_node *np)
|
|
{
|
|
struct led_init_data init_data = {
|
|
.fwnode = of_fwnode_handle(np),
|
|
};
|
|
struct device *dev = leds->dev;
|
|
struct bcm63138_led *led;
|
|
struct pinctrl *pinctrl;
|
|
u32 bit;
|
|
int err;
|
|
|
|
led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
|
|
if (!led) {
|
|
dev_err(dev, "Failed to alloc LED\n");
|
|
return;
|
|
}
|
|
|
|
led->leds = leds;
|
|
|
|
if (of_property_read_u32(np, "reg", &led->pin)) {
|
|
dev_err(dev, "Missing \"reg\" property in %pOF\n", np);
|
|
goto err_free;
|
|
}
|
|
|
|
if (led->pin >= BCM63138_MAX_LEDS) {
|
|
dev_err(dev, "Invalid \"reg\" value %d\n", led->pin);
|
|
goto err_free;
|
|
}
|
|
|
|
led->active_low = of_property_read_bool(np, "active-low");
|
|
|
|
led->cdev.max_brightness = BCM63138_MAX_BRIGHTNESS;
|
|
led->cdev.brightness_set = bcm63138_leds_brightness_set;
|
|
led->cdev.blink_set = bcm63138_leds_blink_set;
|
|
|
|
err = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
|
|
if (err) {
|
|
dev_err(dev, "Failed to register LED %pOF: %d\n", np, err);
|
|
goto err_free;
|
|
}
|
|
|
|
pinctrl = devm_pinctrl_get_select_default(led->cdev.dev);
|
|
if (IS_ERR(pinctrl) && PTR_ERR(pinctrl) != -ENODEV) {
|
|
dev_warn(led->cdev.dev, "Failed to select %pOF pinctrl: %ld\n",
|
|
np, PTR_ERR(pinctrl));
|
|
}
|
|
|
|
bit = BIT(led->pin);
|
|
bcm63138_leds_update_bits(leds, BCM63138_PARALLEL_LED_POLARITY, bit,
|
|
led->active_low ? 0 : bit);
|
|
bcm63138_leds_update_bits(leds, BCM63138_HW_LED_EN, bit, 0);
|
|
bcm63138_leds_set_flash_rate(leds, led, 0);
|
|
bcm63138_leds_enable_led(leds, led, led->cdev.brightness);
|
|
|
|
return;
|
|
|
|
err_free:
|
|
devm_kfree(dev, led);
|
|
}
|
|
|
|
static int bcm63138_leds_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = dev_of_node(&pdev->dev);
|
|
struct device *dev = &pdev->dev;
|
|
struct bcm63138_leds *leds;
|
|
u32 shift_bits;
|
|
|
|
leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL);
|
|
if (!leds)
|
|
return -ENOMEM;
|
|
|
|
leds->dev = dev;
|
|
|
|
leds->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(leds->base))
|
|
return PTR_ERR(leds->base);
|
|
|
|
spin_lock_init(&leds->lock);
|
|
|
|
/* If this property is not present, we use boot defaults */
|
|
if (!of_property_read_u32(np, "brcm,serial-shift-bits", &shift_bits)) {
|
|
bcm63138_leds_write(leds, BCM63138_SERIAL_LED_SHIFT_SEL,
|
|
GENMASK(shift_bits - 1, 0));
|
|
}
|
|
|
|
bcm63138_leds_write(leds, BCM63138_GLB_CTRL,
|
|
BCM63138_GLB_CTRL_SERIAL_LED_DATA_PPOL |
|
|
BCM63138_GLB_CTRL_SERIAL_LED_EN_POL);
|
|
bcm63138_leds_write(leds, BCM63138_HW_LED_EN, 0);
|
|
bcm63138_leds_write(leds, BCM63138_SERIAL_LED_POLARITY, 0);
|
|
bcm63138_leds_write(leds, BCM63138_PARALLEL_LED_POLARITY, 0);
|
|
|
|
for_each_available_child_of_node_scoped(np, child) {
|
|
bcm63138_leds_create_led(leds, child);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm63138_leds_of_match_table[] = {
|
|
{ .compatible = "brcm,bcm63138-leds", },
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver bcm63138_leds_driver = {
|
|
.probe = bcm63138_leds_probe,
|
|
.driver = {
|
|
.name = "leds-bcm63xxx",
|
|
.of_match_table = bcm63138_leds_of_match_table,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(bcm63138_leds_driver);
|
|
|
|
MODULE_AUTHOR("Rafał Miłecki");
|
|
MODULE_DESCRIPTION("Broadcom BCM63138 SoC LED driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(of, bcm63138_leds_of_match_table);
|