linux/drivers/accel/habanalabs
Pavan S 6ca282c3e6 accel/habanalabs: add Infineon version check
On HL338 ASICs, the Infineon first‑stage firmware is not present and
the reported version is 0. In this case printing a version number is
misleading, as it suggests valid firmware when it does not exist.

Fix this by printing the first‑stage Infineon firmware version only
if the reported value is non‑zero. This avoids confusing or incorrect
log messages on devices where the first stage is not applicable.

Signed-off-by: Pavan S <pavan.sreenivas@intel.com>
Reviewed-by: Koby Elbaz <koby.elbaz@intel.com>
Signed-off-by: Koby Elbaz <koby.elbaz@intel.com>
2025-09-25 09:14:45 +03:00
..
common accel/habanalabs: add Infineon version check 2025-09-25 09:14:45 +03:00
gaudi accel/habanalabs: support mapping cb with vmalloc-backed coherent memory 2025-09-25 09:09:30 +03:00
gaudi2 accel/habanalabs/gaudi2: read preboot status after recovering from dirty state 2025-09-25 09:09:32 +03:00
goya accel/habanalabs: no CPUCP prints on heartbeat failure 2024-06-23 09:45:51 +03:00
include accel/habanalbs/gaudi2: reduce interrupt count to 128 2024-06-23 09:53:07 +03:00
Kconfig accel/habanalabs: add NVMe Direct I/O (HLDIO) infrastructure 2025-09-25 09:09:30 +03:00
Makefile