public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-08-05 16:54:27 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
Abel Vesa d12fbd11c5 arm64: dts: qcom: x1e001de-devkit: Enable support for both Type-A USB ports 
The Qualcomm X Elite Devkit has 2 USB-A ports, both connected to the USB
multiport controller, each one via a separate NXP PTN3222 eUSB2-to-USB2
redriver to the eUSB2 PHY for High-Speed support, with a dedicated QMP
PHY for SuperSpeed support.

Describe each redriver and then enable each pair of PHYs and the
USB controller itself, in order to enable support for the 2 USB-A ports.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250324-x1e001de-devkit-dts-enable-usb-a-ports-v1-1-81153b2d1edf@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-05-14 21:28:46 +01:00

1503 lines
30 KiB
Text
Raw Permalink Blame History

// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "x1e80100.dtsi"
#include "x1e80100-pmics.dtsi"
/ {
model = "Qualcomm Technologies, Inc. X1E001DE Snapdragon Devkit for Windows";
compatible = "qcom,x1e001de-devkit", "qcom,x1e001de", "qcom,x1e80100";
aliases {
serial0 = &uart21;
};
wcd938x: audio-codec {
compatible = "qcom,wcd9385-codec";
pinctrl-names = "default";
pinctrl-0 = <&wcd_default>;
qcom,micbias1-microvolt = <1800000>;
qcom,micbias2-microvolt = <1800000>;
qcom,micbias3-microvolt = <1800000>;
qcom,micbias4-microvolt = <1800000>;
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
qcom,rx-device = <&wcd_rx>;
qcom,tx-device = <&wcd_tx>;
reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
vdd-buck-supply = <&vreg_l15b_1p8>;
vdd-rxtx-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l15b_1p8>;
vdd-mic-bias-supply = <&vreg_bob1>;
#sound-dai-cells = <1>;
};
chosen {
stdout-path = "serial0:115200n8";
};
pmic-glink {
compatible = "qcom,x1e80100-pmic-glink",
"qcom,sm8550-pmic-glink",
"qcom,pmic-glink";
#address-cells = <1>;
#size-cells = <0>;
orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
<&tlmm 123 GPIO_ACTIVE_HIGH>,
<&tlmm 125 GPIO_ACTIVE_HIGH>;
/* Back panel port closer to the RJ45 connector */
connector@0 {
compatible = "usb-c-connector";
reg = <0>;
power-role = "dual";
data-role = "dual";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss0_hs_in: endpoint {
remote-endpoint = <&usb_1_ss0_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss0_ss_in: endpoint {
remote-endpoint = <&retimer_ss0_ss_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_ss0_con_sbu_in: endpoint {
remote-endpoint = <&retimer_ss0_con_sbu_out>;
};
};
};
};
/* Back panel port closer to the audio jack */
connector@1 {
compatible = "usb-c-connector";
reg = <1>;
power-role = "dual";
data-role = "host";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss1_hs_in: endpoint {
remote-endpoint = <&usb_1_ss1_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss1_ss_in: endpoint {
remote-endpoint = <&retimer_ss1_ss_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_ss1_con_sbu_in: endpoint {
remote-endpoint = <&retimer_ss1_con_sbu_out>;
};
};
};
};
/* Front panel port */
connector@2 {
compatible = "usb-c-connector";
reg = <2>;
power-role = "dual";
data-role = "host";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
pmic_glink_ss2_hs_in: endpoint {
remote-endpoint = <&usb_1_ss2_dwc3_hs>;
};
};
port@1 {
reg = <1>;
pmic_glink_ss2_ss_in: endpoint {
remote-endpoint = <&retimer_ss2_ss_out>;
};
};
port@2 {
reg = <2>;
pmic_glink_ss2_con_sbu_in: endpoint {
remote-endpoint = <&retimer_ss2_con_sbu_out>;
};
};
};
};
};
reserved-memory {
linux,cma {
compatible = "shared-dma-pool";
size = <0x0 0x8000000>;
reusable;
linux,cma-default;
};
};
sound {
compatible = "qcom,x1e80100-sndcard";
model = "X1E001DE-DEVKIT";
audio-routing = "IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC2", "MIC BIAS2",
"TX SWR_INPUT1", "ADC2_OUTPUT";
wcd-playback-dai-link {
link-name = "WCD Playback";
cpu {
sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
};
codec {
sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
wcd-capture-dai-link {
link-name = "WCD Capture";
cpu {
sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
};
codec {
sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
};
platform {
sound-dai = <&q6apm>;
};
};
};
vreg_nvme: regulator-nvme {
compatible = "regulator-fixed";
regulator-name = "VREG_NVME_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&nvme_reg_en>;
regulator-boot-on;
};
vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR0_1P15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb0_pwr_1p15_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR0_1P8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb0_1p8_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR0_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&usb0_3p3_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR1_1P15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&rtmr1_1p15_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR1_1P8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&rtmr1_1p8_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR1_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&rtmr1_3p3_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR2_1P15";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&rtmr2_1p15_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR2_1P8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&rtmr2_1p8_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
compatible = "regulator-fixed";
regulator-name = "VREG_RTMR2_3P3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&rtmr2_3p3_reg_en>;
pinctrl-names = "default";
regulator-boot-on;
};
vph_pwr: regulator-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
regulator-boot-on;
};
vreg_wwan: regulator-wwan {
compatible = "regulator-fixed";
regulator-name = "SDX_VPH_PWR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&wwan_sw_en>;
pinctrl-names = "default";
regulator-boot-on;
};
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8550-rpmh-regulators";
qcom,pmic-id = "b";
vdd-bob1-supply = <&vph_pwr>;
vdd-bob2-supply = <&vph_pwr>;
vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
vdd-l2-l13-l14-supply = <&vreg_bob1>;
vdd-l5-l16-supply = <&vreg_bob1>;
vdd-l6-l7-supply = <&vreg_bob2>;
vdd-l8-l9-supply = <&vreg_bob1>;
vdd-l12-supply = <&vreg_s5j_1p2>;
vdd-l15-supply = <&vreg_s4c_1p8>;
vdd-l17-supply = <&vreg_bob2>;
vreg_bob1: bob1 {
regulator-name = "vreg_bob1";
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob2: bob2 {
regulator-name = "vreg_bob2";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1b_1p8: ldo1 {
regulator-name = "vreg_l1b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2b_3p0: ldo2 {
regulator-name = "vreg_l2b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4b_1p8: ldo4 {
regulator-name = "vreg_l4b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l5b_3p0: ldo5 {
regulator-name = "vreg_l5b_3p0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l6b_1p8: ldo6 {
regulator-name = "vreg_l6b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7b_2p8: ldo7 {
regulator-name = "vreg_l7b_2p8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8b_3p0: ldo8 {
regulator-name = "vreg_l8b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9b_2p9: ldo9 {
regulator-name = "vreg_l9b_2p9";
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10b_1p8: ldo10 {
regulator-name = "vreg_l10b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12b_1p2: ldo12 {
regulator-name = "vreg_l12b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-always-on;
};
vreg_l13b_3p0: ldo13 {
regulator-name = "vreg_l13b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14b_3p0: ldo14 {
regulator-name = "vreg_l14b_3p0";
regulator-min-microvolt = <3072000>;
regulator-max-microvolt = <3072000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15b_1p8: ldo15 {
regulator-name = "vreg_l15b_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-always-on;
};
vreg_l16b_2p9: ldo16 {
regulator-name = "vreg_l16b_2p9";
regulator-min-microvolt = <2912000>;
regulator-max-microvolt = <2912000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17b_2p5: ldo17 {
regulator-name = "vreg_l17b_2p5";
regulator-min-microvolt = <2504000>;
regulator-max-microvolt = <2504000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "c";
vdd-l1-supply = <&vreg_s5j_1p2>;
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s4-supply = <&vph_pwr>;
vreg_s4c_1p8: smps4 {
regulator-name = "vreg_s4c_1p8";
regulator-min-microvolt = <1856000>;
regulator-max-microvolt = <2000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1c_1p2: ldo1 {
regulator-name = "vreg_l1c_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_0p8: ldo2 {
regulator-name = "vreg_l2c_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_0p8: ldo3 {
regulator-name = "vreg_l3c_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-2 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "d";
vdd-l1-supply = <&vreg_s1f_0p7>;
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s4c_1p8>;
vdd-s1-supply = <&vph_pwr>;
vreg_l1d_0p8: ldo1 {
regulator-name = "vreg_l1d_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2d_0p9: ldo2 {
regulator-name = "vreg_l2d_0p9";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3d_1p8: ldo3 {
regulator-name = "vreg_l3d_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-3 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "e";
vdd-l2-supply = <&vreg_s1f_0p7>;
vdd-l3-supply = <&vreg_s5j_1p2>;
vreg_l2e_0p8: ldo2 {
regulator-name = "vreg_l2e_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3e_1p2: ldo3 {
regulator-name = "vreg_l3e_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-4 {
compatible = "qcom,pmc8380-rpmh-regulators";
qcom,pmic-id = "f";
vdd-l1-supply = <&vreg_s5j_1p2>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s5j_1p2>;
vdd-s1-supply = <&vph_pwr>;
vreg_s1f_0p7: smps1 {
regulator-name = "vreg_s1f_0p7";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1f_1p0: ldo1 {
regulator-name = "vreg_l1f_1p0";
regulator-min-microvolt = <1024000>;
regulator-max-microvolt = <1024000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2f_1p0: ldo2 {
regulator-name = "vreg_l2f_1p0";
regulator-min-microvolt = <1024000>;
regulator-max-microvolt = <1024000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3f_1p0: ldo3 {
regulator-name = "vreg_l3f_1p0";
regulator-min-microvolt = <1024000>;
regulator-max-microvolt = <1024000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-6 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "i";
vdd-l1-supply = <&vreg_s4c_1p8>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vreg_s1i_0p9: smps1 {
regulator-name = "vreg_s1i_0p9";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_s2i_1p0: smps2 {
regulator-name = "vreg_s2i_1p0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1100000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1i_1p8: ldo1 {
regulator-name = "vreg_l1i_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2i_1p2: ldo2 {
regulator-name = "vreg_l2i_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3i_0p8: ldo3 {
regulator-name = "vreg_l3i_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-7 {
compatible = "qcom,pm8550ve-rpmh-regulators";
qcom,pmic-id = "j";
vdd-l1-supply = <&vreg_s1f_0p7>;
vdd-l2-supply = <&vreg_s5j_1p2>;
vdd-l3-supply = <&vreg_s1f_0p7>;
vdd-s5-supply = <&vph_pwr>;
vreg_s5j_1p2: smps5 {
regulator-name = "vreg_s5j_1p2";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l1j_0p8: ldo1 {
regulator-name = "vreg_l1j_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2j_1p2: ldo2 {
regulator-name = "vreg_l2j_1p2";
regulator-min-microvolt = <1256000>;
regulator-max-microvolt = <1256000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3j_0p8: ldo3 {
regulator-name = "vreg_l3j_0p8";
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <920000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
};
&gpu {
status = "okay";
zap-shader {
firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcdxkmsuc8380.mbn";
};
};
&i2c1 {
clock-frequency = <400000>;
status = "okay";
typec-mux@8 {
compatible = "parade,ps8830";
reg = <0x08>;
clocks = <&rpmhcc RPMH_RF_CLK5>;
vdd-supply = <&vreg_rtmr2_1p15>;
vdd33-supply = <&vreg_rtmr2_3p3>;
vdd33-cap-supply = <&vreg_rtmr2_3p3>;
vddar-supply = <&vreg_rtmr2_1p15>;
vddat-supply = <&vreg_rtmr2_1p15>;
vddio-supply = <&vreg_rtmr2_1p8>;
reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&rtmr2_default>;
pinctrl-names = "default";
orientation-switch;
retimer-switch;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
retimer_ss2_ss_out: endpoint {
remote-endpoint = <&pmic_glink_ss2_ss_in>;
};
};
port@1 {
reg = <1>;
retimer_ss2_ss_in: endpoint {
remote-endpoint = <&usb_1_ss2_qmpphy_out>;
};
};
port@2 {
reg = <2>;
retimer_ss2_con_sbu_out: endpoint {
remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
};
};
};
};
};
&i2c3 {
clock-frequency = <400000>;
status = "okay";
typec-mux@8 {
compatible = "parade,ps8830";
reg = <0x08>;
clocks = <&rpmhcc RPMH_RF_CLK3>;
vdd-supply = <&vreg_rtmr0_1p15>;
vdd33-supply = <&vreg_rtmr0_3p3>;
vdd33-cap-supply = <&vreg_rtmr0_3p3>;
vddar-supply = <&vreg_rtmr0_1p15>;
vddat-supply = <&vreg_rtmr0_1p15>;
vddio-supply = <&vreg_rtmr0_1p8>;
reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&rtmr0_default>;
pinctrl-names = "default";
retimer-switch;
orientation-switch;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
retimer_ss0_ss_out: endpoint {
remote-endpoint = <&pmic_glink_ss0_ss_in>;
};
};
port@1 {
reg = <1>;
retimer_ss0_ss_in: endpoint {
remote-endpoint = <&usb_1_ss0_qmpphy_out>;
};
};
port@2 {
reg = <2>;
retimer_ss0_con_sbu_out: endpoint {
remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
};
};
};
};
};
&i2c5 {
clock-frequency = <400000>;
status = "okay";
eusb3_repeater: redriver@47 {
compatible = "nxp,ptn3222";
reg = <0x47>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb3_reset_n>;
pinctrl-names = "default";
};
eusb6_repeater: redriver@4f {
compatible = "nxp,ptn3222";
reg = <0x4f>;
#phy-cells = <0>;
vdd3v3-supply = <&vreg_l13b_3p0>;
vdd1v8-supply = <&vreg_l4b_1p8>;
reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&eusb6_reset_n>;
pinctrl-names = "default";
};
};
&i2c7 {
clock-frequency = <400000>;
status = "okay";
typec-mux@8 {
compatible = "parade,ps8830";
reg = <0x8>;
clocks = <&rpmhcc RPMH_RF_CLK4>;
vdd-supply = <&vreg_rtmr1_1p15>;
vdd33-supply = <&vreg_rtmr1_3p3>;
vdd33-cap-supply = <&vreg_rtmr1_3p3>;
vddar-supply = <&vreg_rtmr1_1p15>;
vddat-supply = <&vreg_rtmr1_1p15>;
vddio-supply = <&vreg_rtmr1_1p8>;
reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&rtmr1_default>;
pinctrl-names = "default";
retimer-switch;
orientation-switch;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
retimer_ss1_ss_out: endpoint {
remote-endpoint = <&pmic_glink_ss1_ss_in>;
};
};
port@1 {
reg = <1>;
retimer_ss1_ss_in: endpoint {
remote-endpoint = <&usb_1_ss1_qmpphy_out>;
};
};
port@2 {
reg = <2>;
retimer_ss1_con_sbu_out: endpoint {
remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
};
};
};
};
};
&mdss {
status = "okay";
};
&mdss_dp0 {
status = "okay";
};
&mdss_dp0_out {
data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp1 {
status = "okay";
};
&mdss_dp1_out {
data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&mdss_dp2 {
status = "okay";
};
&mdss_dp2_out {
data-lanes = <0 1>;
link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
};
&pcie4 {
perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&pcie4_default>;
pinctrl-names = "default";
status = "okay";
};
&pcie4_phy {
vdda-phy-supply = <&vreg_l3i_0p8>;
vdda-pll-supply = <&vreg_l3e_1p2>;
status = "okay";
};
&pcie5 {
perst-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&vreg_wwan>;
pinctrl-0 = <&pcie5_default>;
pinctrl-names = "default";
status = "okay";
};
&pcie5_phy {
vdda-phy-supply = <&vreg_l3i_0p8>;
vdda-pll-supply = <&vreg_l3e_1p2>;
status = "okay";
};
&pcie6a {
perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&vreg_nvme>;
pinctrl-names = "default";
pinctrl-0 = <&pcie6a_default>;
status = "okay";
};
&pcie6a_phy {
vdda-phy-supply = <&vreg_l1d_0p8>;
vdda-pll-supply = <&vreg_l2j_1p2>;
status = "okay";
};
&pm8550_gpios {
rtmr0_default: rtmr0-reset-n-active-state {
pins = "gpio10";
function = "normal";
power-source = <1>; /* 1.8 V */
bias-disable;
input-disable;
output-enable;
};
usb0_3p3_reg_en: usb0-3p3-reg-en-state {
pins = "gpio11";
function = "normal";
power-source = <1>; /* 1.8 V */
bias-disable;
input-disable;
output-enable;
};
};
&pmc8380_5_gpios {
usb0_pwr_1p15_en: usb0-pwr-1p15-en-state {
pins = "gpio8";
function = "normal";
power-source = <1>; /* 1.8 V */
bias-disable;
input-disable;
output-enable;
};
};
&pm8550ve_9_gpios {
usb0_1p8_reg_en: usb0-1p8-reg-en-state {
pins = "gpio8";
function = "normal";
power-source = <1>; /* 1.8 V */
bias-disable;
input-disable;
output-enable;
};
};
&qupv3_0 {
status = "okay";
};
&qupv3_1 {
status = "okay";
};
&qupv3_2 {
status = "okay";
};
&remoteproc_adsp {
firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qcadsp8380.mbn",
"qcom/x1e80100/Thundercomm/DEVKIT/adsp_dtbs.elf";
status = "okay";
};
&remoteproc_cdsp {
firmware-name = "qcom/x1e80100/Thundercomm/DEVKIT/qccdsp8380.mbn",
"qcom/x1e80100/Thundercomm/DEVKIT/cdsp_dtbs.elf";
status = "okay";
};
&sdhc_2 {
cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
pinctrl-names = "default", "sleep";
vmmc-supply = <&vreg_l9b_2p9>;
vqmmc-supply = <&vreg_l6b_1p8>;
bus-width = <4>;
no-sdio;
no-mmc;
status = "okay";
};
&smb2360_0 {
status = "okay";
};
&smb2360_0_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l2b_3p0>;
};
&smb2360_1 {
status = "okay";
};
&smb2360_1_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l14b_3p0>;
};
&smb2360_2 {
status = "okay";
};
&smb2360_2_eusb2_repeater {
vdd18-supply = <&vreg_l3d_1p8>;
vdd3-supply = <&vreg_l8b_3p0>;
};
&swr1 {
status = "okay";
/* WCD9385 RX */
wcd_rx: codec@0,4 {
compatible = "sdw20217010d00";
reg = <0 4>;
qcom,rx-port-mapping = <1 2 3 4 5>;
};
};
&swr2 {
status = "okay";
/* WCD9385 TX */
wcd_tx: codec@0,3 {
compatible = "sdw20217010d00";
reg = <0 3>;
qcom,tx-port-mapping = <2 2 3 4>;
};
};
&tlmm {
gpio-reserved-ranges = <44 4>; /* SPI (TPM) */
eusb3_reset_n: eusb3-reset-n-state {
pins = "gpio6";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
eusb6_reset_n: eusb6-reset-n-state {
pins = "gpio184";
function = "gpio";
drive-strength = <2>;
bias-disable;
output-low;
};
nvme_reg_en: nvme-reg-en-state {
pins = "gpio18";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
pcie4_default: pcie4-default-state {
clkreq-n-pins {
pins = "gpio147";
function = "pcie4_clk";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio146";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wake-n-pins {
pins = "gpio148";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie5_default: pcie5-default-state {
clkreq-n-pins {
pins = "gpio150";
function = "pcie5_clk";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio149";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wake-n-pins {
pins = "gpio151";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
pcie6a_default: pcie6a-default-state {
clkreq-n-pins {
pins = "gpio153";
function = "pcie6a_clk";
drive-strength = <2>;
bias-pull-up;
};
perst-n-pins {
pins = "gpio152";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
wake-n-pins {
pins = "gpio154";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
};
rtmr1_default: rtmr1-reset-n-active-state {
pins = "gpio176";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr2_default: rtmr2-reset-n-active-state {
pins = "gpio185";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
pins = "gpio188";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
pins = "gpio175";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
pins = "gpio186";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr2_1p15_reg_en: rtmr2-1p15-reg-en-state {
pins = "gpio189";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr2_1p8_reg_en: rtmr2-1p8-reg-en-state {
pins = "gpio126";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
rtmr2_3p3_reg_en: rtmr2-3p3-reg-en-state {
pins = "gpio187";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdc2_card_det_n: sdc2-card-det-state {
pins = "gpio71";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
wcd_default: wcd-reset-n-active-state {
pins = "gpio191";
function = "gpio";
drive-strength = <16>;
bias-disable;
output-low;
};
wwan_sw_en: wwan-sw-en-state {
pins = "gpio221";
function = "gpio";
drive-strength = <4>;
bias-disable;
};
};
&uart21 {
compatible = "qcom,geni-debug-uart";
status = "okay";
};
&usb_1_ss0_hsphy {
vdd-supply = <&vreg_l3j_0p8>;
vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_0_eusb2_repeater>;
status = "okay";
};
&usb_1_ss0_qmpphy {
vdda-phy-supply = <&vreg_l2j_1p2>;
vdda-pll-supply = <&vreg_l1j_0p8>;
status = "okay";
};
&usb_1_ss0 {
status = "okay";
};
&usb_1_ss0_dwc3 {
dr_mode = "otg";
usb-role-switch;
};
&usb_1_ss0_dwc3_hs {
remote-endpoint = <&pmic_glink_ss0_hs_in>;
};
&usb_1_ss0_qmpphy_out {
remote-endpoint = <&retimer_ss0_ss_in>;
};
&usb_1_ss1_hsphy {
vdd-supply = <&vreg_l3j_0p8>;
vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_1_eusb2_repeater>;
status = "okay";
};
&usb_1_ss1_qmpphy {
vdda-phy-supply = <&vreg_l2j_1p2>;
vdda-pll-supply = <&vreg_l2d_0p9>;
status = "okay";
};
&usb_1_ss1 {
status = "okay";
};
&usb_1_ss1_dwc3 {
dr_mode = "host";
};
&usb_1_ss1_dwc3_hs {
remote-endpoint = <&pmic_glink_ss1_hs_in>;
};
&usb_1_ss1_qmpphy_out {
remote-endpoint = <&retimer_ss1_ss_in>;
};
&usb_1_ss2_hsphy {
vdd-supply = <&vreg_l3j_0p8>;
vdda12-supply = <&vreg_l2j_1p2>;
phys = <&smb2360_2_eusb2_repeater>;
status = "okay";
};
&usb_1_ss2_qmpphy {
vdda-phy-supply = <&vreg_l2j_1p2>;
vdda-pll-supply = <&vreg_l2d_0p9>;
status = "okay";
};
&usb_1_ss2 {
status = "okay";
};
&usb_1_ss2_dwc3 {
dr_mode = "host";
};
&usb_1_ss2_dwc3_hs {
remote-endpoint = <&pmic_glink_ss2_hs_in>;
};
&usb_1_ss2_qmpphy_out {
remote-endpoint = <&retimer_ss2_ss_in>;
};
&usb_mp {
status = "okay";
};
&usb_mp_hsphy0 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb6_repeater>;
status = "okay";
};
&usb_mp_hsphy1 {
vdd-supply = <&vreg_l2e_0p8>;
vdda12-supply = <&vreg_l3e_1p2>;
phys = <&eusb3_repeater>;
status = "okay";
};
&usb_mp_qmpphy0 {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3c_0p8>;
status = "okay";
};
&usb_mp_qmpphy1 {
vdda-phy-supply = <&vreg_l3e_1p2>;
vdda-pll-supply = <&vreg_l3c_0p8>;
status = "okay";
};
Reference in a new issue View git blame Copy permalink