public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-08-19 22:11:22 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
Linus Torvalds 7d4e49a77d - The 3 patch series "hung_task: extend blocking task stacktrace dump to 
semaphore" from Lance Yang enhances the hung task detector.  The
   detector presently dumps the blocking tasks's stack when it is blocked
   on a mutex.  Lance's series extends this to semaphores.
 
 - The 2 patch series "nilfs2: improve sanity checks in dirty state
   propagation" from Wentao Liang addresses a couple of minor flaws in
   nilfs2.
 
 - The 2 patch series "scripts/gdb: Fixes related to lx_per_cpu()" from
   Illia Ostapyshyn fixes a couple of issues in the gdb scripts.
 
 - The 9 patch series "Support kdump with LUKS encryption by reusing LUKS
   volume keys" from Coiby Xu addresses a usability problem with kdump.
   When the dump device is LUKS-encrypted, the kdump kernel may not have
   the keys to the encrypted filesystem.  A full writeup of this is in the
   series [0/N] cover letter.
 
 - The 2 patch series "sysfs: add counters for lockups and stalls" from
   Max Kellermann adds /sys/kernel/hardlockup_count and
   /sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count.
 
 - The 3 patch series "fork: Page operation cleanups in the fork code"
   from Pasha Tatashin implements a number of code cleanups in fork.c.
 
 - The 3 patch series "scripts/gdb/symbols: determine KASLR offset on
   s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in
   the gdb scripts.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDuCvQAKCRDdBJ7gKXxA
 jrkxAQCnFAp/uK9ckkbN4nfpJ0+OMY36C+A+dawSDtuRsIkXBAEAq3e6MNAUdg5W
 Ca0cXdgSIq1Op7ZKEA+66Km6Rfvfow8=
 =g45L
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - "hung_task: extend blocking task stacktrace dump to semaphore" from
   Lance Yang enhances the hung task detector.

   The detector presently dumps the blocking tasks's stack when it is
   blocked on a mutex. Lance's series extends this to semaphores

 - "nilfs2: improve sanity checks in dirty state propagation" from
   Wentao Liang addresses a couple of minor flaws in nilfs2

 - "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
   fixes a couple of issues in the gdb scripts

 - "Support kdump with LUKS encryption by reusing LUKS volume keys" from
   Coiby Xu addresses a usability problem with kdump.

   When the dump device is LUKS-encrypted, the kdump kernel may not have
   the keys to the encrypted filesystem. A full writeup of this is in
   the series [0/N] cover letter

 - "sysfs: add counters for lockups and stalls" from Max Kellermann adds
   /sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
   /sys/kernel/rcu_stall_count

 - "fork: Page operation cleanups in the fork code" from Pasha Tatashin
   implements a number of code cleanups in fork.c

 - "scripts/gdb/symbols: determine KASLR offset on s390 during early
   boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
   scripts

* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
  llist: make llist_add_batch() a static inline
  delayacct: remove redundant code and adjust indentation
  squashfs: add optional full compressed block caching
  crash_dump, nvme: select CONFIGFS_FS as built-in
  scripts/gdb/symbols: determine KASLR offset on s390 during early boot
  scripts/gdb/symbols: factor out pagination_off()
  scripts/gdb/symbols: factor out get_vmlinux()
  kernel/panic.c: format kernel-doc comments
  mailmap: update and consolidate Casey Connolly's name and email
  nilfs2: remove wbc->for_reclaim handling
  fork: define a local GFP_VMAP_STACK
  fork: check charging success before zeroing stack
  fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
  fork: clean-up ifdef logic around stack allocation
  kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
  kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
  x86/crash: make the page that stores the dm crypt keys inaccessible
  x86/crash: pass dm crypt keys to kdump kernel
  Revert "x86/mm: Remove unused __set_memory_prot()"
  crash_dump: retrieve dm crypt keys in kdump kernel
  ...
2025-05-31 19:12:53 -07:00

747 lines
15 KiB
Text
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
* Copyright (c) 2022, Casey Connolly <casey.connolly@linaro.org>
* Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
/ {
model = "SHIFT SHIFT6mq";
compatible = "shift,axolotl", "qcom,sdm845";
qcom,msm-id = <321 0x20001>;
qcom,board-id = <11 0>;
aliases {
display0 = &framebuffer0;
serial0 = &uart9;
serial1 = &uart6;
};
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
stdout-path = "serial0";
/* Use framebuffer setup by the bootloader. */
framebuffer0: framebuffer@9d400000 {
compatible = "simple-framebuffer";
reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
width = <1080>;
height = <2160>;
stride = <(1080 * 4)>;
format = "a8r8g8b8";
};
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
pinctrl-names = "default";
pinctrl-0 = <&volume_up_gpio>;
key-vol-up {
label = "volume_up";
linux,code = <KEY_VOLUMEUP>;
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
};
reserved-memory {
framebuffer@9d400000 {
reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
no-map;
};
ramoops: ramoops@b0000000 {
compatible = "ramoops";
reg = <0 0xb0000000 0 0x00400000>;
record-size = <0x40000>;
console-size = <0x40000>;
ftrace-size = <0x40000>;
pmsg-size = <0x200000>;
ecc-size = <0x0>;
};
};
battery: battery {
compatible = "simple-battery";
charge-full-design-microamp-hours = <3850000>;
voltage-min-design-microvolt = <3600000>;
voltage-max-design-microvolt = <4400000>;
};
vph_pwr: vph-pwr-regulator {
compatible = "regulator-fixed";
regulator-name = "vph_pwr";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
vreg_s4a_1p8: pm8998-smps4 {
compatible = "regulator-fixed";
regulator-name = "vreg_s4a_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
vin-supply = <&vph_pwr>;
};
};
&adsp_pas {
status = "okay";
firmware-name = "qcom/sdm845/axolotl/adsp.mbn";
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm8998-rpmh-regulators";
qcom,pmic-id = "a";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vdd-s5-supply = <&vph_pwr>;
vdd-s6-supply = <&vph_pwr>;
vdd-s7-supply = <&vph_pwr>;
vdd-s8-supply = <&vph_pwr>;
vdd-s9-supply = <&vph_pwr>;
vdd-s10-supply = <&vph_pwr>;
vdd-s11-supply = <&vph_pwr>;
vdd-s12-supply = <&vph_pwr>;
vdd-s13-supply = <&vph_pwr>;
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
vdd-l6-supply = <&vph_pwr>;
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
vdd-l9-supply = <&vreg_bob>;
vdd-l10-l23-l25-supply = <&vreg_bob>;
vdd-l13-l19-l21-supply = <&vreg_bob>;
vdd-l16-l28-supply = <&vreg_bob>;
vdd-l18-l22-supply = <&vreg_bob>;
vdd-l20-l24-supply = <&vreg_bob>;
vdd-l26-supply = <&vreg_s3a_1p35>;
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
vreg_s2a_1p125: smps2 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
vreg_s3a_1p35: smps3 {
regulator-min-microvolt = <1352000>;
regulator-max-microvolt = <1352000>;
};
vreg_s5a_2p04: smps5 {
regulator-min-microvolt = <1904000>;
regulator-max-microvolt = <2040000>;
};
vreg_s7a_1p025: smps7 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1028000>;
};
vdd_qusb_hs0:
vdda_hp_pcie_core:
vdda_mipi_csi0_0p9:
vdda_mipi_csi1_0p9:
vdda_mipi_csi2_0p9:
vdda_mipi_dsi0_pll:
vdda_mipi_dsi1_pll:
vdda_qlink_lv:
vdda_qlink_lv_ck:
vdda_qrefs_0p875:
vdda_pcie_core:
vdda_pll_cc_ebi01:
vdda_pll_cc_ebi23:
vdda_sp_sensor:
vdda_ufs1_core:
vdda_ufs2_core:
vdda_usb1_ss_core:
vdda_usb2_ss_core:
vreg_l1a_0p875: ldo1 {
regulator-min-microvolt = <880000>;
regulator-max-microvolt = <880000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vddpx_10:
vreg_l2a_1p2: ldo2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-always-on;
};
vreg_l3a_1p0: ldo3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_wcss_cx:
vdd_wcss_mx:
vdda_wcss_pll:
vreg_l5a_0p8: ldo5 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vddpx_13:
vreg_l6a_1p8: ldo6 {
regulator-min-microvolt = <1856000>;
regulator-max-microvolt = <1856000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7a_1p8: ldo7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l8a_1p2: ldo8 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1248000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9a_1p8: ldo9 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a_1p8: ldo10 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <2928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11a_1p0: ldo11 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1048000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdd_qfprom:
vdd_qfprom_sp:
vdda_apc1_cs_1p8:
vdda_gfx_cs_1p8:
vdda_qrefs_1p8:
vdda_qusb_hs0_1p8:
vddpx_11:
vreg_l12a_1p8: ldo12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vddpx_2:
vreg_l13a_2p95: ldo13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14a_1p88: ldo14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a_1p8: ldo15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a_2p7: ldo16 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2704000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a_1p3: ldo17 {
regulator-min-microvolt = <1304000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18a_2p7: ldo18 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l19a_3p0: ldo19 {
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3104000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l20a_2p95: ldo20 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l21a_2p95: ldo21 {
regulator-min-microvolt = <2704000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l22a_2p85: ldo22 {
regulator-min-microvolt = <2864000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l23a_3p3: ldo23 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdda_qusb_hs0_3p1:
vreg_l24a_3p075: ldo24 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l25a_3p3: ldo25 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vdda_hp_pcie_1p2:
vdda_hv_ebi0:
vdda_hv_ebi1:
vdda_hv_ebi2:
vdda_hv_ebi3:
vdda_mipi_csi_1p25:
vdda_mipi_dsi0_1p2:
vdda_mipi_dsi1_1p2:
vdda_pcie_1p2:
vdda_ufs1_1p2:
vdda_ufs2_1p2:
vdda_usb1_ss_1p2:
vdda_usb2_ss_1p2:
vreg_l26a_1p2: ldo26 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l28a_3p0: ldo28 {
regulator-min-microvolt = <2856000>;
regulator-max-microvolt = <3008000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_lvs1a_1p8: lvs1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vreg_lvs2a_1p8: lvs2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
};
regulators-1 {
compatible = "qcom,pmi8998-rpmh-regulators";
qcom,pmic-id = "b";
vdd-bob-supply = <&vph_pwr>;
vreg_bob: bob {
regulator-min-microvolt = <3312000>;
regulator-max-microvolt = <3600000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
regulator-allow-bypass;
};
};
regulators-2 {
compatible = "qcom,pm8005-rpmh-regulators";
qcom,pmic-id = "c";
vdd-s1-supply = <&vph_pwr>;
vdd-s2-supply = <&vph_pwr>;
vdd-s3-supply = <&vph_pwr>;
vdd-s4-supply = <&vph_pwr>;
vreg_s3c_0p6: smps3 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <600000>;
};
};
};
&cdsp_pas {
status = "okay";
firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
};
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
<GCC_LPASS_Q6_AXI_CLK>,
<GCC_LPASS_SWAY_CLK>;
};
&gpu {
status = "okay";
zap-shader {
memory-region = <&gpu_mem>;
firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
};
};
&i2c5 {
status = "okay";
touchscreen@38 {
compatible = "focaltech,fts8719";
reg = <0x38>;
wakeup-source;
interrupt-parent = <&tlmm>;
interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&vreg_l28a_3p0>;
vcc-i2c-supply = <&vreg_l14a_1p88>;
pinctrl-names = "default", "suspend";
pinctrl-0 = <&ts_int_active &ts_reset_active>;
pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
touchscreen-size-x = <1080>;
touchscreen-size-y = <2160>;
};
};
&i2c10 {
/* SMB1355@0x0C */
};
&ipa {
qcom,gsi-loader = "self";
memory-region = <&ipa_fw_mem>;
firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn";
status = "okay";
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
status = "okay";
vdda-supply = <&vdda_mipi_dsi0_1p2>;
panel@0 {
compatible = "visionox,rm69299-shift";
status = "okay";
reg = <0>;
vdda-supply = <&vreg_l14a_1p88>;
vdd3p3-supply = <&vreg_l28a_3p0>;
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sde_dsi_active &sde_te_active>;
pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
port {
panel_in_0: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
&mdss_dsi0_out {
remote-endpoint = <&panel_in_0>;
data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
status = "okay";
vdds-supply = <&vdda_mipi_dsi0_pll>;
};
&mss_pil {
status = "okay";
firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
};
&pm8998_gpios {
volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
function = "normal";
input-enable;
bias-pull-up;
qcom,drive-strength = <0>;
};
};
};
&pmi8998_charger {
monitored-battery = <&battery>;
status = "okay";
};
&pm8998_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pmi8998_lpg {
status = "okay";
multi-led {
color = <LED_COLOR_ID_RGB>;
function = LED_FUNCTION_STATUS;
#address-cells = <1>;
#size-cells = <0>;
led@3 {
reg = <3>;
color = <LED_COLOR_ID_BLUE>;
};
led@4 {
reg = <4>;
color = <LED_COLOR_ID_GREEN>;
};
led@5 {
reg = <5>;
color = <LED_COLOR_ID_RED>;
};
};
};
&pmi8998_flash {
status = "okay";
led-0 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_WHITE>;
led-sources = <1>;
led-max-microamp = <100000>;
flash-max-microamp = <1100000>;
flash-max-timeout-us = <1280000>;
};
led-1 {
function = LED_FUNCTION_FLASH;
color = <LED_COLOR_ID_YELLOW>;
led-sources = <2>;
led-max-microamp = <100000>;
flash-max-microamp = <1100000>;
flash-max-timeout-us = <1280000>;
};
};
&qup_uart9_rx {
drive-strength = <2>;
bias-pull-up;
};
&qup_uart9_tx {
drive-strength = <2>;
bias-disable;
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&slpi_pas {
firmware-name = "qcom/sdm845/axolotl/slpi.mbn";
status = "okay";
};
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
sde_dsi_active: sde-dsi-active-state {
pins = "gpio6", "gpio11";
function = "gpio";
drive-strength = <8>;
bias-disable;
};
sde_dsi_suspend: sde-dsi-suspend-state {
pins = "gpio6", "gpio11";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
sde_te_active: sde-te-active-state {
pins = "gpio10";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
sde_te_suspend: sde-te-suspend-state {
pins = "gpio10";
function = "mdp_vsync";
drive-strength = <2>;
bias-pull-down;
};
ts_int_active: ts-int-active-state {
pins = "gpio125";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
ts_int_suspend: ts-int-suspend-state {
pins = "gpio125";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
ts_reset_active: ts-reset-active-state {
pins = "gpio99";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
ts_reset_suspend: ts-reset-suspend-state {
pins = "gpio99";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
};
&uart6 {
status = "okay";
pinctrl-0 = <&qup_uart6_4pin>;
bluetooth {
compatible = "qcom,wcn3990-bt";
/*
* This path is relative to the qca/
* subdir under lib/firmware.
*/
firmware-name = "axolotl/crnv21.bin";
vddio-supply = <&vreg_s4a_1p8>;
vddxo-supply = <&vreg_l7a_1p8>;
vddrf-supply = <&vreg_l17a_1p3>;
vddch0-supply = <&vreg_l25a_3p3>;
max-speed = <3200000>;
};
};
&uart9 {
status = "okay";
};
&ufs_mem_hc {
status = "okay";
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
vcc-supply = <&vreg_l20a_2p95>;
vcc-max-microamp = <600000>;
};
&ufs_mem_phy {
status = "okay";
vdda-phy-supply = <&vdda_ufs1_core>;
vdda-pll-supply = <&vdda_ufs1_1p2>;
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "peripheral";
};
&usb_1_hsphy {
status = "okay";
vdd-supply = <&vreg_l1a_0p875>;
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
vdda-pll-supply = <&vreg_l12a_1p8>;
};
&usb_1_qmpphy {
status = "okay";
vdda-phy-supply = <&vreg_l26a_1p2>;
vdda-pll-supply = <&vreg_l1a_0p875>;
};
&venus {
status = "okay";
firmware-name = "qcom/sdm845/axolotl/venus.mbn";
};
&wifi {
status = "okay";
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
qcom,snoc-host-cap-8bit-quirk;
};
Reference in a new issue View git blame Copy permalink