linux/arch/arm/boot/dts/nspire/nspire-classic.dtsi
Andrew Davis af88df1276 ARM: dts: nspire: Add unit name addresses to memory nodes
Fixes the following DTB check warning:

> node has a reg or ranges property, but no unit name

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240612151314.27967-1-afd@ti.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2024-06-23 12:55:34 +02:00

86 lines
1.3 KiB
Text

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
*/
/include/ "nspire.dtsi"
&lcd {
port {
clcd_pads: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
&fast_timer {
/* compatible = "lsi,zevio-timer"; */
reg = <0x90010000 0x1000>, <0x900a0010 0x8>;
};
&uart {
compatible = "ns16550";
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb_pclk>;
no-loopback-test;
};
&timer0 {
/* compatible = "lsi,zevio-timer"; */
reg = <0x900c0000 0x1000>, <0x900a0018 0x8>;
};
&timer1 {
compatible = "lsi,zevio-timer";
reg = <0x900d0000 0x1000>, <0x900a0020 0x8>;
};
&keypad {
active-low;
};
&base_clk {
compatible = "lsi,nspire-classic-clock";
};
&ahb_clk {
compatible = "lsi,nspire-classic-ahb-divider";
};
&vbus_reg {
gpio = <&gpio 5 0>;
};
/ {
memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x2000000>; /* 32 MB */
};
ahb {
#address-cells = <1>;
#size-cells = <1>;
intc: interrupt-controller@dc000000 {
compatible = "lsi,zevio-intc";
interrupt-controller;
reg = <0xdc000000 0x1000>;
#interrupt-cells = <1>;
};
};
panel {
compatible = "ti,nspire-classic-lcd-panel";
port {
panel_in: endpoint {
remote-endpoint = <&clcd_pads>;
};
};
};
chosen {
bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0";
};
};