linux/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
Frank Li 08305a6d23 dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml
Change ref to mmc-controller-common.yaml from mmc-controller.yaml because
imx23/imx28 use dual mode controller (spi and mmc). So default dts node
name use spi instead of mmc. The legacy reason, it use difference
compatible string to distringuish work mode (spi / mmc).

Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi@80010000 (fsl,imx23-mmc): $nodename:0: 'spi@80010000' does not match '^mmc(@.*)?$'

Additional add clocks property.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250603152245.1068740-1-Frank.Li@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2025-06-24 12:43:26 +02:00

63 lines
1.1 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/mxs-mmc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale MXS MMC controller
maintainers:
- Shawn Guo <shawnguo@kernel.org>
description: |
The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller
to support MMC, SD, and SDIO types of memory cards.
This file documents differences between the core properties in mmc.txt
and the properties used by the mxsmmc driver.
allOf:
- $ref: mmc-controller-common.yaml#
properties:
compatible:
enum:
- fsl,imx23-mmc
- fsl,imx28-mmc
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
dmas:
maxItems: 1
dma-names:
const: rx-tx
required:
- compatible
- reg
- interrupts
- clocks
- dmas
- dma-names
unevaluatedProperties: false
examples:
- |
mmc@80010000 {
compatible = "fsl,imx28-mmc";
reg = <0x80010000 2000>;
interrupts = <96>;
clocks = <&clks 46>;
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
bus-width = <8>;
};