mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
c24a9b698f
They're still in the operating range according to i.MX 8M Quad
datasheet. There's some headroom added over minimal values to
account for voltage drop.
Operational ranges (min - typ - max [selected]):
- VDD_SOC (BUCK1): 0.81 - 0.9 - 0.99 [0.88]
- VDD_ARM (BUCK2): 0.81 - 0.9 - 1.05 [0.84] (1000MHz)
0.90 - 1.0 - 1.05 [0.93] (1500MHz)
- VDD_GPU (BUCK3): 0.81 - 0.9 - 1.05 [0.85] (800MHz)
0.90 - 1.0 - 1.05 [ -- ] (1000MHz)
- VDD_VPU (BUCK4): 0.81 - 0.9 - 1.05 [ -- ] (550/500/588MHz)
0.90 - 1.0 - 1.05 [0.93] (660/600/800MHz)
Idle power consumption doesn't appear to be influenced much,
but a simple load test (`cat /dev/urandom | pigz - > /dev/null`
combined with running Animatch) seems to show about 0.3W of
difference.
Care is advised, as there may be differences between each
units in how low can they be undervolted - in my experience,
reaching that point usually makes the phone fail to boot.
In my case, it appears that my Birch phone can go down the most.
This is a somewhat conservative set of values that I've seen
working well on all my devices; I haven't tried very hard to
optimize it, so more experiments are welcome.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
16 lines
252 B
Text
16 lines
252 B
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (C) 2021 Purism SPC <kernel@puri.sm>
|
|
|
|
/dts-v1/;
|
|
|
|
#include "imx8mq-librem5-r3.dtsi"
|
|
|
|
&a53_opp_table {
|
|
opp-1000000000 {
|
|
opp-microvolt = <950000>;
|
|
};
|
|
};
|
|
|
|
&buck3_reg {
|
|
regulator-always-on;
|
|
};
|