It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmEQ1REUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7w5ggAhpcDrpO7eimqPmkr/8FxI6WLGh/t
OjsAM+WVlAlHMPRC53r94Ot8q1XbenkA8Cr3hA88cJS+Hx2WunyXL4szUO+Bh/A5
o/ZpMPbitea7wQRVJkVX0AsBrvJ4hj+MQmlk31Kd2Jk7Ptpo3hoPb1J7Lg2Fou3K
g6nAELMSxa8+/1xt2AkNJppnDp6eRcOsc3yqO+7SsTGlr2JzB6SN21yvOzLWd8+Y
4v3J3a84G/w6vUlSa5mloIbGOOkyxEYitLBPrgjc5AvPjJEc0m/QlArmnuaGn1j+
LXfPFNDIlG5EIvF5HzrXMl6z8E4pGx7hWgDG/4SDWvYcbhlggtLnmra4Tg==
=bmM2
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iV7U
-----END PGP SIGNATURE-----
Merge tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX eCSPI errata handling for 5.15:
It includes all required changes for handling i.MX6/7 eCSPI errata
ERR009165, which causes FIFO transfer to be sent twice in DMA mode.
Both SPI and DMA maintainers agree to merge it through arm-soc tree.
* tag 'imx-ecspi-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dmaengine: imx-sdma: add terminated list for freed descriptor in worker
dmaengine: imx-sdma: add uart rom script
dma: imx-sdma: add i.mx6ul compatible name
dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
spi: imx: remove ERR009165 workaround on i.mx6ul
spi: imx: fix ERR009165
dmaengine: imx-sdma: add mcu_2_ecspi script
dmaengine: dma: imx-sdma: add fw_loaded and is_ram_script
dmaengine: imx-sdma: remove duplicated sdma_load_context
Revert "dmaengine: imx-sdma: refine to load context only once"
Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
Link: https://lore.kernel.org/r/20210809071838.GF30984@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fix the following waring:
drivers/spi/spi-mxic.c: In function ‘mxic_spi_mem_exec_op’:
drivers/spi/spi-mxic.c:401:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (op->data.dir == SPI_MEM_DATA_IN)
^~
drivers/spi/spi-mxic.c:403:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
if (op->data.dtr)
^~
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Zhengxun Li <zhengxunli@mxic.com.tw>
Link: https://lore.kernel.org/r/20210810142405.2221540-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For spi-pic32, this is probably not currently an issue but is still good to
fix though.
Fixes: 1bcb9f8ceb ("spi: spi-pic32: Add PIC32 SPI master driver")
Cc: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210810081727.19491-2-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Depending on the DMA driver being used, the struct dma_slave_config may
need to be initialized to zero for the unused data.
For example, we have three DMA drivers using src_port_window_size and
dst_port_window_size. If these are left uninitialized, it can cause DMA
failures.
For spi-fsl-dspi, this is probably not currently an issue but is still
good to fix though.
Fixes: 90ba37033c ("spi: spi-fsl-dspi: Add DMA support for Vybrid")
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210810081727.19491-1-tony@atomide.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver patch for octal DTR mode support.
Owing to the spi_mem_default_supports_op() is not support dtr
operation. Based on commit <539cf68cd51b> (spi: spi-mem: add
spi_mem_dtr_supports_op()) add spi_mem_dtr_supports_op()
to support dtr and keep checking the buswidth and command bytes.
Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw>
Link: https://lore.kernel.org/r/1628054827-458-1-git-send-email-zhengxunli@mxic.com.tw
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't use resource-managed spi_register helper to correct the driver
removal order and make it to match the error unwinding order of the
probe function.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210731192731.5869-2-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Tegra SPI driver supports runtime PM, which controls the clock
enable state, but the clk is also enabled separately from the RPM
at the driver probe time, and thus, stays always on. Fix it.
Runtime PM now is always available on Tegra, hence there is no need to
check the RPM presence in the driver anymore. Remove these checks.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210731192731.5869-1-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need the fixes in here as well, and resolves some merge issues with
the mhi codebase.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A small collection of fixes for SPI, small mostly driver specific things
plus a fix for module autoloading which hadn't been working properly for
DT systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmENTEUACgkQJNaLcl1U
h9CmsQf9GnIyNfbLOUkpW8Cb5Thm0WWAUr8vBR63rJl+Q6uSSuJirzXzexKGRBlT
g/y3zfPvmmJqSKrivD8GhXvFei0eCubg43hXImL23z2R2o85E4yS1S0VOKSK8cfE
ir/vGxRVi8vrm0VlOTRtP5ueXrCMmIHNiq7Dp1ZBIY9Qkr59Aj61by+pd2jtnCDJ
sCIZUQsUJeNtS3FGSnAcINqNdlgnebA54k3CktGo2DUwwy506ECDpf8tHlKRtL5A
SH89ON8h/jRU/wtcDFclFVEys+W2nyzVZ5/O0vUWwHvH336TMzPJMT+SqyQ3xT/L
9MU//psaWAQaiWT70SY1/9MSMEwKGw==
=LXn1
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes for SPI, small mostly driver specific
things plus a fix for module autoloading which hadn't been working
properly for DT systems"
* tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: Fix check condition for DTR ops
spi: mediatek: Fix fifo transfer
spi: imx: mx51-ecspi: Fix CONFIGREG delay comment
spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation
spi: update modalias_show after of_device_uevent_modalias support
spi: meson-spicc: fix memory leak in meson_spicc_remove
spi: spi-mux: Add module info needed for autoloading
buswidth and dtr fields in spi_mem_op are only valid when the
corresponding spi_mem_op phase has a non-zero length. For example,
SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR
phase.
Fix the dtr checks in set_protocol() and suppports_mem_op() to
ignore empty spi_mem_op phases, as checking for dtr field in
empty phase will result in false negatives.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch modified set_cs_timing parameter, no need pass in spi_delay
to set_cs_timing callback.
By the way, we modified the mediatek and tegra114 spi driver to fix build err.
In mediatek spi driver, We have support set absolute time not clk_count,
and call this function in prepare_message not user's API.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133746.6742-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As we know, spi core layer has removed spi_set_cs_timing() API.
So this patch moved spi_delay for cs_timing from spi_controller
to spi_device, because cs timing should be set by spi_device but
not controller.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210804133716.32040-1-Mason.Zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
General Electric Healthcare's PPD has a secondary processor from
NXP's Kinetis K20 series. That device has two SPI chip selects:
The main interface's behaviour depends on the loaded firmware
and is currently unused.
The secondary interface can be used to update the firmware using
EzPort protocol. This is implemented by this driver using the
kernel's firmware API. The firmware is being flashed into
non-volatile flash memory, so it is enough to flash it once
and not on every boot. Flashing will wear the flash memory
(it has a life time of at least 10k programming cycles). At
the same time only occasional FW updates are expected (like e.g.
a BIOS update). Thus the firmware update is triggered via sysfs
instead of doing it in the driver's probe routine like many
other drivers.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210802172309.164365-4-sebastian.reichel@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FPGA Manager
- Colin's change is a simple spelling cleanup.
DFL
- Martin's fist change exposes DFL feature revision to client drivers
- Martin's second change modifies a SPI driver to populate different
spi_board_info modaliases based on the DFL feature revision
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSdhnt2PwibB65UG0C3mJX/Vsn7uQUCYQqyeQAKCRC3mJX/Vsn7
uQBCAP9JAcGZf6Rd1uV6Y9P0jpAvnsRA5AnwpXT5Vmo3qAtGqwD8DK+19sdN5gIk
vUdicT7mH8ZO6OSIDxNg3/kXHgG69Ac=
=qlgw
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next
Moritz writes:
FPGA Manager changes for 5.15-rc1
FPGA Manager
- Colin's change is a simple spelling cleanup.
DFL
- Martin's fist change exposes DFL feature revision to client drivers
- Martin's second change modifies a SPI driver to populate different
spi_board_info modaliases based on the DFL feature revision
All patches have been reviewed on the mailing list, and have been in the
last few linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
spi: spi-altera-dfl: support n5010 feature revision
fpga: dfl: expose feature revision from struct dfl_device
fpga: Fix spelling mistake "eXchnage" -> "exchange" in Kconfig
This series series of patches converts ep93xx to Common Clock Framework.
It consists of preparation patches to use clk_prepare_enable where it is
needed, instead of clk_enable used in ep93xx drivers prior to CCF and
a patch converting mach-ep93xx/clock.c to CCF.
Link: https://lore.kernel.org/patchwork/cover/1445563/
Link: https://lore.kernel.org/patchwork/patch/1435884/
v1->v2:
- added SoB
Alexander Sverdlin (7):
iio: ep93xx: Prepare clock before using it
spi: spi-ep93xx: Prepare clock before using it
Input: ep93xx_keypad: Prepare clock before using it
video: ep93xx: Prepare clock before using it
dmaengine: ep93xx: Prepare clock before using it
ASoC: cirrus: i2s: Prepare clock before using it
pwm: ep93xx: Prepare clock before using it
Nikita Shubin (1):
ep93xx: clock: convert in-place to COMMON_CLK
arch/arm/Kconfig | 2 +-
arch/arm/mach-ep93xx/clock.c | 975 ++++++++++++++-----------
arch/arm/mach-ep93xx/core.c | 2 +-
arch/arm/mach-ep93xx/soc.h | 42 +-
drivers/dma/ep93xx_dma.c | 6 +-
drivers/iio/adc/ep93xx_adc.c | 6 +-
drivers/input/keyboard/ep93xx_keypad.c | 4 +-
drivers/pwm/pwm-ep93xx.c | 12 +-
drivers/spi/spi-ep93xx.c | 4 +-
drivers/video/fbdev/ep93xx-fb.c | 4 +-
sound/soc/cirrus/ep93xx-i2s.c | 12 +-
11 files changed, 605 insertions(+), 464 deletions(-)
base-commit: 64376a981a0e2e57c46efa63197c2ebb7dab35df
--
2.26.2
Use clk_prepare_enable()/clk_disable_unprepare() in preparation for switch
to Common Clock Framework, otherwise the following is visible:
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:1011 clk_core_enable+0x9c/0xbc
Enabling unprepared ep93xx-spi.0
...
Hardware name: Cirrus Logic EDB9302 Evaluation Board
...
clk_core_enable
clk_core_enable_lock
ep93xx_spi_prepare_hardware
__spi_pump_messages
__spi_sync
spi_sync
spi_sync_transfer.constprop.0
regmap_spi_write
_regmap_raw_write_impl
_regmap_bus_raw_write
_regmap_update_bits
regmap_update_bits_base
cs4271_component_probe
snd_soc_component_probe
soc_probe_component
snd_soc_bind_card
edb93xx_probe
...
spi_master spi0: failed to prepare transfer hardware: -108
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210726140001.24820-3-nikita.shubin@maquefel.me
Signed-off-by: Mark Brown <broonie@kernel.org>
This only works when the native chipselect is in use. On a board with a
Ti ADS7950 8 channel ADC. This patch reduces the time to read out all
channels once from 280 us to 20 us.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210727124226.5571-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 3a70dd2d05 ("spi: mediatek: fix fifo rx mode") claims that
fifo RX mode was never handled, and adds the presumably missing code
to the FIFO transfer function. However, the claim that receive data
was not handled is incorrect. It was handled as part of interrupt
handling after the transfer was complete. The code added with the above
mentioned commit reads data from the receive FIFO before the transfer
is started, which is wrong. This results in an actual transfer error
on a Hayato Chromebook.
Remove the code trying to handle receive data before the transfer is
started to fix the problem.
Fixes: 3a70dd2d05 ("spi: mediatek: fix fifo rx mode")
Cc: Peter Hess <peter.hess@ph-home.de>
Cc: Frank Wunderlich <frank-w@public-files.de>
Cc: Tzung-Bi Shih <tzungbi@google.com>
Cc: Hsin-Yi Wang <hsinyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210802030023.1748777-1-linux@roeck-us.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The Max10 BMC on the Silicom n5010 PAC is slightly different than the
existing BMCs, so use a dedicated feature revision detect it.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin Hundebøll <mhu@silicom.dk>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
For (2 * 1000000) / min_speed_hz < 10 to be true in naturals with zero,
the min_speed_hz must be above 200000 (i.e. 200001 rounds down to 9, so
the condition triggers). Update the comment. No functional change.
Fixes: 6fd8b8503a ("spi: spi-imx: Fix out-of-order CS/SCLK operation at low speeds")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210727160428.7673-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The spi_imx->spi_bus_clk may be uninitialized and thus also zero in
mx51_ecspi_prepare_message(), which would lead to division by zero
in kernel. Since bitbang .setup_transfer callback which initializes
the spi_imx->spi_bus_clk is called after bitbang prepare_message
callback, iterate over all the transfers in spi_message, find the
one with lowest bus frequency, and use that bus frequency for the
delay calculation.
Note that it is not possible to move this CONFIGREG delay back into
the .setup_transfer callback, because that is invoked too late, after
the GPIO chipselects were already configured.
Fixes: 135cbd378e ("spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210726100102.5188-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
ERR009165 fixed on i.mx6ul/6ull/6sll. All other i.mx6/7 and
i.mx8m/8mm still need this errata. Please refer to nxp official
errata document from https://www.nxp.com/ .
For removing workaround on those chips. Add new i.mx6ul type.
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change to XCH mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 3ce6c9e261 ("spi: add of_device_uevent_modalias support") is
incomplete, as it didn't update the modalias_show function to generate the
of: modalias string if available.
Fixes: 3ce6c9e261 ("spi: add of_device_uevent_modalias support")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://lore.kernel.org/r/mvmwnpi4fya.fsf@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
In meson_spicc_probe, the error handling code needs to clean up master
by calling spi_master_put, but the remove function does not have this
function call. This will lead to memory leak of spicc->master.
Reported-by: Dongliang Mu <mudongliangabcd@gmail.com>
Fixes: 454fa271bc4e("spi: Add Meson SPICC driver")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Link: https://lore.kernel.org/r/20210720100116.1438974-1-mudongliangabcd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In some cases reset_sccr1() can be called when no message available.
This means that there is no associated chip to receive that message
and hence no threshold needs to be set. Adapt the function to such
cases.
Fixes: 3bbdc08326 ("spi: pxa2xx: Reuse int_stop_and_reset() in couple of places")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210721121520.62605-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A collection of driver specific fixes, there was a bit of a kerfuffle
with some last minute review on hte spi-cadence-quadspi division by zero
change but otherwise nothing terribly remarkable here - important fixes
if you have the hardware but nothing with too wide an impact.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmD4WjwACgkQJNaLcl1U
h9CofQf/exao6MVAh2aMFv4A0UjQ4jI/wOWzhDY84ooxtTpcSlmAcPNR/yXt7yvc
2s7OcDOSRL8uO9agrnLINDzRrB/+Z8N7ra3sUwzzkNEe6YoOcLYW+GvFSYbyqqPQ
w8Ij6xn05RINQ63WuwwNHNwxlNBcXAT/bkKUkuzAinQi91hehwVQrAgoaNmbDzvI
B0NhSwVEYvlEsfvmVwOJN4VUDbFor31oE3hNvK685ATRvPEQssbQarloK4OsPajv
hOKqDNY/UKggSEFSaeN8gExrylhqEsXk1r+p0S8kKfZnyoNkemPa9xK2QD5YjulE
V9rDs90qjWoA1Rw90e61HvDbtDBgdQ==
=74y9
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A collection of driver specific fixes, there was a bit of a kerfuffle
with some last minute review on hte spi-cadence-quadspi division by
zero change but otherwise nothing terribly remarkable here - important
fixes if you have the hardware but nothing with too wide an impact"
* tag 'spi-fix-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-bcm2835: Fix deadlock
spi: cadence: Correct initialisation of runtime PM again
spi: cadence-quadspi: Disable Auto-HW polling
spi: spi-cadence-quadspi: Fix division by zero warning
spi: spi-cadence-quadspi: Revert "Fix division by zero warning"
spi: spi-cadence-quadspi: Fix division by zero warning
spi: mediatek: move devm_spi_register_master position
spi: mediatek: fix fifo rx mode
spi: atmel: Fix CS and initialization bug
spi: stm32: fixes pm_runtime calls in probe/remove
spi: imx: mx51-ecspi: Reinstate low-speed CONFIGREG delay
spi: stm32h7: fix full duplex irq handler handling
The driver core ignores the return value of this callback because there
is only little it can do when a device disappears.
This is the final bit of a long lasting cleanup quest where several
buses were converted to also return void from their remove callback.
Additionally some resource leaks were fixed that were caused by drivers
returning an error code in the expectation that the driver won't go
away.
With struct bus_type::remove returning void it's prevented that newly
implemented buses return an ignored error code and so don't anticipate
wrong expectations for driver authors.
Reviewed-by: Tom Rix <trix@redhat.com> (For fpga)
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio)
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts)
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb)
Acked-by: Pali Rohár <pali@kernel.org>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media)
Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform)
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com> (For xen)
Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd)
Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb)
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus)
Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio)
Acked-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec)
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack)
Acked-by: Geoff Levand <geoff@infradead.org> (For ps3)
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt)
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th)
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia)
Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI)
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr)
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid)
Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM)
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa)
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire)
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid)
Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox)
Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss)
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC)
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bcm2835_spi_transfer_one function can create a deadlock
if it is called while another thread already has the
CCF lock.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Fixes: f8043872e7 ("spi: add driver for BCM2835")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The security restrictions on the FSI-attached SPI controllers have
been applied universally to all controllers, so the controller can no
longer transfer more than 8 bytes for one transfer. Refactor the driver
to remove the looping and support for larger transfers, and remove the
"restricted" compatible string, as all the controllers are now
considered restricted.
Eddie James (2):
spi: fsi: Reduce max transfer size to 8 bytes
dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible
.../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 1 -
drivers/spi/spi-fsi.c | 125 +++---------------
2 files changed, 22 insertions(+), 104 deletions(-)
--
2.27.0
For each usage of fifo_words it is clear if ->dynamic_burst is true or
not. This can be used to simplify the function a bit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210716173927.2050620-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reuse int_stop_and_reset() in couple of places.
While at it, change the order of the int_stop_and_reset() and pxa2xx_spi_off()
to be in align with the similar flow in int_error_stop().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210719074842.36060-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The original implementation of RPM handling in probe() was mostly
correct, except it failed to call pm_runtime_get_*() to activate the
hardware. The subsequent fix, 734882a8bf ("spi: cadence: Correct
initialisation of runtime PM"), breaks the implementation further,
to the point where the system using this hard IP on ZynqMP hangs on
boot, because it accesses hardware which is gated off.
Undo 734882a8bf ("spi: cadence: Correct initialisation of runtime
PM") and instead add missing pm_runtime_get_noresume() and move the
RPM disabling all the way to the end of probe(). That makes ZynqMP
not hang on boot yet again.
Fixes: 734882a8bf ("spi: cadence: Correct initialisation of runtime PM")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210716182133.218640-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
cadence-quadspi has a builtin Auto-HW polling funtionality using which
it keep tracks of completion of write operations. When Auto-HW polling
is enabled, it automatically initiates status register read operation,
until the flash clears its busy bit.
cadence-quadspi controller doesn't allow an address phase when
auto-polling the busy bit on the status register. Unlike SPI NOR
flashes, SPI NAND flashes do require the address of status register
when polling the busy bit using the read register operation. As
Auto-HW polling is enabled by default, cadence-quadspi returns a
timeout for every write operation after an indefinite amount of
polling on SPI NAND flashes.
Disable Auto-HW polling completely as the spi-nor core, spinand core,
etc. take care of polling the busy bit on their own.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20210713125743.1540-2-a-nandan@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix below division by zero warning:
- The reason for dividing by zero is because the dummy bus width is zero,
but if the dummy n bytes is zero, it indicates that there is no data transfer,
so we can just return zero without doing any calculations.
[ 0.795337] Division by zero in kernel.
:
[ 0.834051] [<807fd40c>] (__div0) from [<804e1acc>] (Ldiv0+0x8/0x10)
[ 0.839097] [<805f0710>] (cqspi_exec_mem_op) from [<805edb4c>] (spi_mem_exec_op+0x3b0/0x3f8)
Fixes: 7512eaf541 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1")
Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/92eea403-9b21-2488-9cc1-664bee760c5e@nskint.co.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix below division by zero warning:
- Added an if statement because buswidth can be zero, resulting in division by zero.
- The modified code was based on another driver (atmel-quadspi).
[ 0.795337] Division by zero in kernel.
:
[ 0.834051] [<807fd40c>] (__div0) from [<804e1acc>] (Ldiv0+0x8/0x10)
[ 0.839097] [<805f0710>] (cqspi_exec_mem_op) from [<805edb4c>] (spi_mem_exec_op+0x3b0/0x3f8)
Fixes: 7512eaf541 ("spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1")
Signed-off-by: Yoshitaka Ikeda <ikeda@nskint.co.jp>
Link: https://lore.kernel.org/r/ed989af6-da88-4e0b-9ed8-126db6cad2e4@nskint.co.jp
Signed-off-by: Mark Brown <broonie@kernel.org>
The comment in setup_fifo_xfer() about setting the watermark wasn't
quite proper grammar and also stopped making sense around commit
6d66507d9b ("spi: spi-geni-qcom: Don't wait to start 1st transfer if
transmitting"). After that commit we actually start the transfer
_before_ the watermark interrupt comes.
I don't think the comment really has any value anymore. We've already
got a comment when we grab the spinlock saying that our interrupt can
come any time as a result of the things in the locked section. Let's
just remove it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210712085010.1.Ie3bb9f9d30d6475bb75251d32635194c1c72b9ee@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch support tick_delay setting, some users need use
high-speed spi speed, which can use tick_delay to tuning spi clk timing.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210713114048.29509-1-mason.zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch move devm_spi_register_master to the end of mtk_spi_probe.
If slaves call spi_sync in there probe function, master should have probe done.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210713114247.1536-1-mason.zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This series contains fixes & cleanup mainly regarding fifo
and the way end of transfer triggered, when used with or
without DMA.
An additional patch cleans up the pm_runtime calls and another
one enables the autosuspend.
v2: - split pm_runtime fix patch into two
- correct revert commit subject line
Alain Volmat (6):
spi: stm32: fixes pm_runtime calls in probe/remove
spi: stm32: enable pm_runtime autosuspend
spi: stm32h7: fix full duplex irq handler handling
spi: stm32: Revert "properly handle 0 byte transfer"
spi: stm32h7: don't wait for EOT and flush fifo on disable
spi: stm32: finalize message either on dma callback or EOT
Amelie Delaunay (1):
spi: stm32h7: rework rx fifo read function
drivers/spi/spi-stm32.c | 146 +++++++++++++++++-----------------------
1 file changed, 61 insertions(+), 85 deletions(-)
--
2.25.1
This patch add no_need_unprepare support for spi, if spi src clk is
MAIN PLL, it can keep the clk_prepare and will not cause low power
issue. So we no need do clk_prepare/clk_unprepare in runtime pm,
and it will get better performance, because clk_prepare has called
mutex lock.
In the same way,
clk_get_rate also has called mutex lock, so we moved it to spi_probe.
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Link: https://lore.kernel.org/r/20210629100814.21402-1-mason.zhang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
