For reasons that I haven't quite fully diagnosed, running
mov_ss_trap_32 on a 32-bit kernel results in an infinite loop in
userspace. This appears to be because the hacky SYSENTER test
doesn't segfault as desired; instead it corrupts the program state
such that it infinite loops.
Fix it by explicitly clearing EBP before doing SYSENTER. This will
give a more reliable segfault.
Fixes: 59c2a7226f ("x86/selftests: Add mov_to_ss test")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
The spectre_v2 test must be built 64-bit, it includes hand-written asm
that is 64-bit only, and segfaults if built 32-bit.
Fixes: c790c3d2b0 ("selftests/powerpc: Add a test of spectre_v2 mitigations")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191120023924.13130-1-mpe@ellerman.id.au
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-11-20
The following pull-request contains BPF updates for your *net-next* tree.
We've added 81 non-merge commits during the last 17 day(s) which contain
a total of 120 files changed, 4958 insertions(+), 1081 deletions(-).
There are 3 trivial conflicts, resolve it by always taking the chunk from
196e8ca748:
<<<<<<< HEAD
=======
void *bpf_map_area_mmapable_alloc(u64 size, int numa_node);
>>>>>>> 196e8ca748
<<<<<<< HEAD
void *bpf_map_area_alloc(u64 size, int numa_node)
=======
static void *__bpf_map_area_alloc(u64 size, int numa_node, bool mmapable)
>>>>>>> 196e8ca748
<<<<<<< HEAD
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
=======
/* kmalloc()'ed memory can't be mmap()'ed */
if (!mmapable && size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
>>>>>>> 196e8ca748
The main changes are:
1) Addition of BPF trampoline which works as a bridge between kernel functions,
BPF programs and other BPF programs along with two new use cases: i) fentry/fexit
BPF programs for tracing with practically zero overhead to call into BPF (as
opposed to k[ret]probes) and ii) attachment of the former to networking related
programs to see input/output of networking programs (covering xdpdump use case),
from Alexei Starovoitov.
2) BPF array map mmap support and use in libbpf for global data maps; also a big
batch of libbpf improvements, among others, support for reading bitfields in a
relocatable manner (via libbpf's CO-RE helper API), from Andrii Nakryiko.
3) Extend s390x JIT with usage of relative long jumps and loads in order to lift
the current 64/512k size limits on JITed BPF programs there, from Ilya Leoshkevich.
4) Add BPF audit support and emit messages upon successful prog load and unload in
order to have a timeline of events, from Daniel Borkmann and Jiri Olsa.
5) Extension to libbpf and xdpsock sample programs to demo the shared umem mode
(XDP_SHARED_UMEM) as well as RX-only and TX-only sockets, from Magnus Karlsson.
6) Several follow-up bug fixes for libbpf's auto-pinning code and a new API
call named bpf_get_link_xdp_info() for retrieving the full set of prog
IDs attached to XDP, from Toke Høiland-Jørgensen.
7) Add BTF support for array of int, array of struct and multidimensional arrays
and enable it for skb->cb[] access in kfree_skb test, from Martin KaFai Lau.
8) Fix AF_XDP by using the correct number of channels from ethtool, from Luigi Rizzo.
9) Two fixes for BPF selftest to get rid of a hang in test_tc_tunnel and to avoid
xdping to be run as standalone, from Jiri Benc.
10) Various BPF selftest fixes when run with latest LLVM trunk, from Yonghong Song.
11) Fix a memory leak in BPF fentry test run data, from Colin Ian King.
12) Various smaller misc cleanups and improvements mostly all over BPF selftests and
samples, from Daniel T. Lee, Andre Guedes, Anders Roxell, Mao Wenan, Yue Haibing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
With the most recent Clang, alu32 is enabled by default if -mcpu=probe or
-mcpu=v3 is specified. Use a separate build rule with -mcpu=v2 to enforce no
ALU32 mode.
Suggested-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191120002510.4130605-1-andriin@fb.com
Check configurations and packets transference with different variations
of autoneg and speed.
Test plan:
1. Test force of same speed with autoneg off
2. Test force of different speeds with autoneg off (should fail)
3. One side is autoneg on and other side sets force of common speeds
4. One side is autoneg on and other side only advertises a subset of the
common speeds (one speed of the subset)
5. One side is autoneg on and other side only advertises a subset of the
common speeds. Check that highest speed is negotiated
6. Test autoneg on, but each side advertises different speeds (should
fail)
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a function that waits for device with maximum number of iterations.
It enables to limit the waiting and prevent infinite loop.
This will be used by the subsequent patch which will set two ports to
different speeds in order to make sure they cannot negotiate a link.
Waiting for all the setup is limited with 10 minutes for each device.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Functions:
1. speeds_arr_get
The function returns an array of speed values from
/usr/include/linux/ethtool.h The array looks as follows:
[10baseT/Half] = 0,
[10baseT/Full] = 1,
...
2. ethtool_set:
params: cmd
The function runs ethtool by cmd (ethtool -s cmd) and checks if
there was an error in configuration
3. dev_speeds_get:
params: dev, with_mode (0 or 1), adver (0 or 1)
return value: Array of supported/Advertised link modes
with/without mode
* Example 1:
speeds_get swp1 0 0
return: 1000 10000 40000
* Example 2:
speeds_get swp1 1 1
return: 1000baseKX/Full 10000baseKR/Full 40000baseCR4/Full
4. common_speeds_get:
params: dev1, dev2, with_mode (0 or 1), adver (0 or 1)
return value: Array of common speeds of dev1 and dev2
* Example:
common_speeds_get swp1 swp2 0 0
return: 1000 10000
Assuming that swp1 supports 1000 10000 40000 and swp2 supports
1000 10000
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The scale test for Spectrum-2 should only be invoked for Spectrum-2.
Skip the test otherwise.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Same as for Spectrum-1, test the ability to add the maximum number of
routes possible to the switch.
Invoke the test from the 'resource_scale' wrapper script.
Signed-off-by: Danielle Ratson <danieller@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, with latest llvm trunk, selftest test_progs failed obj
file test_seg6_loop.o with the following error in verifier:
infinite loop detected at insn 76
The byte code sequence looks like below, and noted that alu32 has been
turned off by default for better generated codes in general:
48: w3 = 100
49: *(u32 *)(r10 - 68) = r3
...
; if (tlv.type == SR6_TLV_PADDING) {
76: if w3 == 5 goto -18 <LBB0_19>
...
85: r1 = *(u32 *)(r10 - 68)
; for (int i = 0; i < 100; i++) {
86: w1 += -1
87: if w1 == 0 goto +5 <LBB0_20>
88: *(u32 *)(r10 - 68) = r1
The main reason for verification failure is due to partial spills at
r10 - 68 for induction variable "i".
Current verifier only handles spills with 8-byte values. The above 4-byte
value spill to stack is treated to STACK_MISC and its content is not
saved. For the above example:
w3 = 100
R3_w=inv100 fp-64_w=inv1086626730498
*(u32 *)(r10 - 68) = r3
R3_w=inv100 fp-64_w=inv1086626730498
...
r1 = *(u32 *)(r10 - 68)
R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
fp-64=inv1086626730498
To resolve this issue, verifier needs to be extended to track sub-registers
in spilling, or llvm needs to enhanced to prevent sub-register spilling
in register allocation phase. The former will increase verifier complexity
and the latter will need some llvm "hacking".
Let us workaround this issue by declaring the induction variable as "long"
type so spilling will happen at non sub-register level. We can revisit this
later if sub-register spilling causes similar or other verification issues.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191117214036.1309510-1-yhs@fb.com
When run_kselftests.sh is run, it hangs after test_tc_tunnel.sh. The reason
is test_tc_tunnel.sh ensures the server ('nc -l') is run all the time,
starting it again every time it is expected to terminate. The exception is
the final client_connect: the server is not started anymore, which ensures
no process is kept running after the test is finished.
For a sit test, though, the script is terminated prematurely without the
final client_connect and the 'nc' process keeps running. This in turn causes
the run_one function in kselftest/runner.sh to hang forever, waiting for the
runaway process to finish.
Ensure a remaining server is terminated on cleanup.
Fixes: f6ad6accaa ("selftests/bpf: expand test_tc_tunnel with SIT encap")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/60919291657a9ee89c708d8aababc28ebe1420be.1573821780.git.jbenc@redhat.com
The actual test to run is test_xdping.sh, which is already in TEST_PROGS.
The xdping program alone is not runnable with 'make run_tests', it
immediatelly fails due to missing arguments.
Move xdping to TEST_GEN_PROGS_EXTENDED in order to be built but not run.
Fixes: cd5385029f ("selftests/bpf: measure RTT from xdp using xdping")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/4365c81198f62521344c2215909634407184387e.1573821726.git.jbenc@redhat.com
Add selftests validating mmap()-ing BPF array maps: both single-element and
multi-element ones. Check that plain bpf_map_update_elem() and
bpf_map_lookup_elem() work correctly with memory-mapped array. Also convert
CO-RE relocation tests to use memory-mapped views of global data.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191117172806.2195367-6-andriin@fb.com
If the clone3() syscall is not implemented we should skip the tests.
Fixes: 41585bbeee ("selftests: add tests for clone3() with *set_tid")
Fixes: 17a810699c ("selftests: add tests for clone3()")
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
This is a regression test case for an issue when pids have not been
released on error paths.
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20191118064750.408003-3-avagin@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
In clone3_set_tid, a few test cases are running in a child process. And
right now, if one of these test cases fails, the whole test will exit
with the success status.
Fixes: 41585bbeee ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20191118064750.408003-2-avagin@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Buffers have to be flushed before clone3() to avoid double messages in
the log.
Fixes: 41585bbeee ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Link: https://lore.kernel.org/r/20191118064750.408003-1-avagin@gmail.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Pull networking fixes from David Miller:
1) Fix memory leak in xfrm_state code, from Steffen Klassert.
2) Fix races between devlink reload operations and device
setup/cleanup, from Jiri Pirko.
3) Null deref in NFC code, from Stephan Gerhold.
4) Refcount fixes in SMC, from Ursula Braun.
5) Memory leak in slcan open error paths, from Jouni Hogander.
6) Fix ETS bandwidth validation in hns3, from Yonglong Liu.
7) Info leak on short USB request answers in ax88172a driver, from
Oliver Neukum.
8) Release mem region properly in ep93xx_eth, from Chuhong Yuan.
9) PTP config timestamp flags validation, from Richard Cochran.
10) Dangling pointers after SKB data realloc in seg6, from Andrea Mayer.
11) Missing free_netdev() in gemini driver, from Chuhong Yuan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
ipmr: Fix skb headroom in ipmr_get_route().
net: hns3: cleanup of stray struct hns3_link_mode_mapping
net/smc: fix fastopen for non-blocking connect()
rds: ib: update WR sizes when bringing up connection
net: gemini: add missed free_netdev
net: dsa: tag_8021q: Fix dsa_8021q_restore_pvid for an absent pvid
seg6: fix skb transport_header after decap_and_validate()
seg6: fix srh pointer in get_srh()
net: stmmac: Use the correct style for SPDX License Identifier
octeontx2-af: Use the correct style for SPDX License Identifier
ptp: Extend the test program to check the external time stamp flags.
mlx5: Reject requests to enable time stamping on both edges.
igb: Reject requests that fail to enable time stamping on both edges.
dp83640: Reject requests to enable time stamping on both edges.
mv88e6xxx: Reject requests to enable time stamping on both edges.
ptp: Introduce strict checking of external time stamp options.
renesas: reject unsupported external timestamp flags
mlx5: reject unsupported external timestamp flags
igb: reject unsupported external timestamp flags
dp83640: reject unsupported external timestamp flags
...
tcp_mmap is used as a reference program for TCP rx zerocopy,
so it is important to point out some potential issues.
If multiple threads are concurrently using getsockopt(...
TCP_ZEROCOPY_RECEIVE), there is a chance the low-level mm
functions compete on shared ptl lock, if vma are arbitrary placed.
Instead of letting the mm layer place the chunks back to back,
this patch enforces an alignment so that each thread uses
a different ptl lock.
Performance measured on a 100 Gbit NIC, with 8 tcp_mmap clients
launched at the same time :
$ for f in {1..8}; do ./tcp_mmap -H 2002:a05:6608:290:: & done
In the following run, we reproduce the old behavior by requesting no alignment :
$ tcp_mmap -sz -C $((128*1024)) -a 4096
received 32768 MB (100 % mmap'ed) in 9.69532 s, 28.3516 Gbit
cpu usage user:0.08634 sys:3.86258, 120.511 usec per MB, 171839 c-switches
received 32768 MB (100 % mmap'ed) in 25.4719 s, 10.7914 Gbit
cpu usage user:0.055268 sys:21.5633, 659.745 usec per MB, 9065 c-switches
received 32768 MB (100 % mmap'ed) in 28.5419 s, 9.63069 Gbit
cpu usage user:0.057401 sys:23.8761, 730.392 usec per MB, 14987 c-switches
received 32768 MB (100 % mmap'ed) in 28.655 s, 9.59268 Gbit
cpu usage user:0.059689 sys:23.8087, 728.406 usec per MB, 18509 c-switches
received 32768 MB (100 % mmap'ed) in 28.7808 s, 9.55074 Gbit
cpu usage user:0.066042 sys:23.4632, 718.056 usec per MB, 24702 c-switches
received 32768 MB (100 % mmap'ed) in 28.8259 s, 9.5358 Gbit
cpu usage user:0.056547 sys:23.6628, 723.858 usec per MB, 23518 c-switches
received 32768 MB (100 % mmap'ed) in 28.8808 s, 9.51767 Gbit
cpu usage user:0.059357 sys:23.8515, 729.703 usec per MB, 14691 c-switches
received 32768 MB (100 % mmap'ed) in 28.8879 s, 9.51534 Gbit
cpu usage user:0.047115 sys:23.7349, 725.769 usec per MB, 21773 c-switches
New behavior (automatic alignment based on Hugepagesize),
we can see the system overhead being dramatically reduced.
$ tcp_mmap -sz -C $((128*1024))
received 32768 MB (100 % mmap'ed) in 13.5339 s, 20.3103 Gbit
cpu usage user:0.122644 sys:3.4125, 107.884 usec per MB, 168567 c-switches
received 32768 MB (100 % mmap'ed) in 16.0335 s, 17.1439 Gbit
cpu usage user:0.132428 sys:3.55752, 112.608 usec per MB, 188557 c-switches
received 32768 MB (100 % mmap'ed) in 17.5506 s, 15.6621 Gbit
cpu usage user:0.155405 sys:3.24889, 103.891 usec per MB, 226652 c-switches
received 32768 MB (100 % mmap'ed) in 19.1924 s, 14.3222 Gbit
cpu usage user:0.135352 sys:3.35583, 106.542 usec per MB, 207404 c-switches
received 32768 MB (100 % mmap'ed) in 22.3649 s, 12.2906 Gbit
cpu usage user:0.142429 sys:3.53187, 112.131 usec per MB, 250225 c-switches
received 32768 MB (100 % mmap'ed) in 22.5336 s, 12.1986 Gbit
cpu usage user:0.140654 sys:3.61971, 114.757 usec per MB, 253754 c-switches
received 32768 MB (100 % mmap'ed) in 22.5483 s, 12.1906 Gbit
cpu usage user:0.134035 sys:3.55952, 112.718 usec per MB, 252997 c-switches
received 32768 MB (100 % mmap'ed) in 22.6442 s, 12.139 Gbit
cpu usage user:0.126173 sys:3.71251, 117.147 usec per MB, 253728 c-switches
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add tests that the now emulated iopl() functionality:
- does not longer allow user space to disable interrupts.
- does restore a I/O bitmap when IOPL is dropped
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add code to the fork path which forces the shared bitmap to be duplicated
and the reference count to be dropped. Verify that the child modifications
did not affect the parent.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This tests clone3() with *set_tid to see if all desired PIDs are working
as expected. The tests are trying multiple invalid input parameters as
well as creating processes while specifying a certain PID in multiple
PID namespaces at the same time.
Additionally this moves common clone3() test code into clone3_selftests.h.
Signed-off-by: Adrian Reber <areber@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191115123621.142252-2-areber@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Add a test that attaches one FEXIT program to main sched_cls networking program
and two other FEXIT programs to subprograms. All three tracing programs
access return values and skb->len of networking program and subprograms.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-21-ast@kernel.org
The test_pkt_access.o is used by multiple tests. Fix its section name so that
program type can be automatically detected by libbpf and make it call other
subprograms with skb argument.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-20-ast@kernel.org
Add stress test for maximum number of attached BPF programs per BPF trampoline.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-13-ast@kernel.org
Add fexit tests for BPF trampoline that checks kernel functions
with up to 6 arguments of different sizes and their return values.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-11-ast@kernel.org
Add sanity test for BPF trampoline that checks kernel functions
with up to 6 arguments of different sizes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-10-ast@kernel.org
Add simple test for fentry and fexit programs around eth_type_trans.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-8-ast@kernel.org
Because each driver and hardware has different capabilities, the test
cannot provide a simple pass/fail result, but it can at least show what
combinations of flags are supported.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we do not plan using pthread_join() in the server do_accept()
loop, we better create detached threads, or risk increasing memory
footprint over time.
Fixes: 192dc405f3 ("selftests: net: add tcp_mmap program")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw does not support VXLAN devices with a physical device attached and
vetoes such configurations upon enslavement to an offloaded bridge.
Commit 0ce1822c2a ("vxlan: add adjacent link to limit depth level")
changed the VXLAN device to be an upper of the physical device which
causes mlxsw to veto the creation of the VXLAN device with "Unknown
upper device type".
This is OK as this configuration is not supported, but it prevents us
from testing bad flows involving the enslavement of VXLAN devices with a
physical device to a bridge, regardless if the physical device is an
mlxsw netdev or not.
Adjust the test to use a dummy device as a physical device instead of a
mlxsw netdev.
Fixes: 0ce1822c2a ("vxlan: add adjacent link to limit depth level")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On kvm_create_max_vcpus test remove unneeded local
variable in the loop that add vcpus to the VM.
Signed-off-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As the ftrace selftests can run for a long period of time, disable the
timeout that the general selftests have. If a selftest hangs, then it
probably means the machine will hang too.
Link: https://lore.kernel.org/r/alpine.LSU.2.21.1911131604170.18679@pobox.suse.cz
Suggested-by: Miroslav Benes <mbenes@suse.cz>
Tested-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
On older distributions like Sles12SP5 gcc does not recognize
-no-pie option making the powerpc selftests build to fail
Fixes the following:
gcc: error: unrecognized command line option ‘-no-pie’
Signed-off-by: Harish <harish@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191113094219.14946-1-harish@linux.ibm.com
The register_ftrace_direct() takes a different path if there's already a
direct call registered, but this was not tested in the self tests. Now that
there's a second direct caller test module, we can use this to test not only
one direct caller, but two.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add two test cases that test the new ftrace direct functionality if the
ftrace-direct sample module is available. One test case tests against each
available tracer (function, function_graph, mmiotrace, etc), and the other
test tests against a kprobe at the same location as the direct caller. Both
tests follow the same pattern of testing combinations:
enable test (either the tracer or the kprobe)
load direct function module
unload direct function module
disable test
enable test
load direct function module
disable test
unload direct function module
load direct function module
enable test
disable test
unload direct function module
load direct function module
enable test
unload direct function module
disable test
As most the bugs in development happened with various ways of enabling or
disabling the direct calls with function tracer in one of these
combinations.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
On the 8xx, signals are generated after executing the instruction. So
no need to manually single-step on 8xx. Also, 8xx __set_dabr()
currently ignores length and hardcodes the length to 8 bytes. So all
unaligned and 512 byte testcase will fail on 8xx. Ignore those
testcases on 8xx.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-8-ravi.bangoria@linux.ibm.com
So far we used to ignore exception if DAR points outside of user
specified range. But now we are ignoring it only if actual load/store
range does not overlap with user specified range. Include selftests
for the same:
# ./tools/testing/selftests/powerpc/ptrace/perf-hwbreak
...
TESTED: No overlap
TESTED: Partial overlap
TESTED: Partial overlap
TESTED: No overlap
TESTED: Full overlap
success: perf_hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-7-ravi.bangoria@linux.ibm.com
ptrace-hwbreak.c selftest is logically broken. On powerpc, when
watchpoint is created with ptrace, signals are generated before
executing the instruction and user has to manually singlestep the
instruction with watchpoint disabled, which selftest never does and
thus it keeps on getting the signal at the same instruction. If we fix
it, selftest fails because the logical connection between
tracer(parent) and tracee(child) is also broken. Rewrite the selftest
and add new tests for unaligned access.
With patch:
$ ./tools/testing/selftests/powerpc/ptrace/ptrace-hwbreak
test: ptrace-hwbreak
tags: git_version:powerpc-5.3-4-224-g218b868240c7-dirty
PTRACE_SET_DEBUGREG, WO, len: 1: Ok
PTRACE_SET_DEBUGREG, WO, len: 2: Ok
PTRACE_SET_DEBUGREG, WO, len: 4: Ok
PTRACE_SET_DEBUGREG, WO, len: 8: Ok
PTRACE_SET_DEBUGREG, RO, len: 1: Ok
PTRACE_SET_DEBUGREG, RO, len: 2: Ok
PTRACE_SET_DEBUGREG, RO, len: 4: Ok
PTRACE_SET_DEBUGREG, RO, len: 8: Ok
PTRACE_SET_DEBUGREG, RW, len: 1: Ok
PTRACE_SET_DEBUGREG, RW, len: 2: Ok
PTRACE_SET_DEBUGREG, RW, len: 4: Ok
PTRACE_SET_DEBUGREG, RW, len: 8: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, WO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RO, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_EXACT, RW, len: 1: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW ALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, WO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RO, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, MODE_RANGE, DW UNALIGNED, DAR OUTSIDE, RW, len: 6: Ok
PPC_PTRACE_SETHWDEBUG, DAWR_MAX_LEN, RW, len: 512: Ok
success: ptrace-hwbreak
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191017093204.7511-6-ravi.bangoria@linux.ibm.com
Add a test of 2 PAGEs size (exceeds devlink previous length limitation)
of binary data on a 'devlink health dump show' command. Set binary length
to 8192, issue a dump show command and clear it.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is necessary to set fd to -1 when inotify_add_watch() fails in
cg_prepare_for_wait. Otherwise the fd which has been closed in
cg_prepare_for_wait may be misused in other functions such as
cg_enter_and_wait_for_frozen and cg_freeze_wait.
Fixes: 5313bfe425 ("selftests: cgroup: add freezer controller self-tests")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This adds tests for clone3() with different values and sizes
of struct clone_args.
This selftest was initially part of of the clone3() with PID selftest.
After that patch was almost merged Eugene sent out a couple of patches
to fix problems with these test.
This commit now only contains the clone3() selftest after the LPC
decision to rework clone3() with PID to allow setting the PID in
multiple PID namespaces including all of Eugene's patches.
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Adrian Reber <areber@redhat.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/20191112095851.811884-1-areber@redhat.com
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
